MikroTik

andrewe02000

I am curious after looking at the results of how many devices that can be seen on Shodan that are on ROS7 as to why most in the community don't upgrade. https://www.shodan.io/search/facet?query=mikrotik&facet=os For me at least its mostly because of BGP route aggregation. I am just was curious w...

andrewe02000

Would be nice if it had a tool to migrate configs to different models when exact replacement model is not available. I have found myself doing this quite a bit. Especially on core router upgrades to new core routers. Other than that everything that Ubiquiti's UISP has but not grandmafied. :) Way out...

andrewe02000

I haven't seen really any updates in a minute on the roadmap. Just wondering very "ROUGHLY" when route aggregation was going to be added for BGP or if there is a different way of doing this that is planned besides blackhole routes. Just looking for some clarity as to what to expect and pos...

andrewe02000

I have the same problem and opened a ticket with no response over 2 weeks ago. Very annoying. The odd thing is that im only getting the tx drops on the interface going to my elan. At first I thought it was an mti mismatch but have since ruled that out. I even put a CRS309 in between my ELAN and my ...

andrewe02000

I have two border routers that both keep full BGP routing tables of their upstream connection and their neighbors upstream connection. Typically the default iBGP configuration will announce all routes in the table to its peer. This seems impossible with RouterOS v7 for some reason. eBGP is announci...

andrewe02000

I have two border routers that both keep full BGP routing tables of their upstream connection and their neighbors upstream connection. Typically the default iBGP configuration will announce all routes in the table to its peer. This seems impossible with RouterOS v7 for some reason. eBGP is announci...

andrewe02000

How do we aggregate routes in bgp now? We don't. I see that blackhole routes in the main table can be used to allow BGP to announce networks in bgp-networks list. Is that the best way so far or are there other ways or one that is less cumbersome? Any downsides to using BH routes to accomplish this?

andrewe02000

Why no route aggregation!

andrewe02000

How do we aggregate routes in bgp now?

andrewe02000

Please add:

- "Old style" routing filters add (like v6), not only syntax

- BFD (for OSPF and BGP)

- MPLS Fast-Path

- BGP session show number of prefix

Thanks MK.

[:Y:]

Agreed. It would be nice to have both.

andrewe02000

The latest use for your CCR2004!

andrewe02000

Could be interesting 6.49 released. switch - improved packet transmit between CPU and 98PX1012 for CCR2004-1G-12S+2XS device; https://forum.mikrotik.com/viewtopic.php?f=21&t=172259&sid=b361e20f0db7dfba4cf5f4ddcaa12707 It's a beta, so test it out first. 6.49beta11 did not fix packetloss but ...

andrewe02000

I ended up pulling my units and not a fan of running beta in production. Maybe I'll get a lab going and try to reproduce this.

andrewe02000

If no one says anything then nothing will get done. We don't deserve to be left in the dark. Regardless of what's going on. The squeaky wheel gets the grease. I'm not going to stop squeaking until I get some grease.

andrewe02000

I'll stop when I get a response.
1 Month 8 days no response.

andrewe02000

And another day. 1 month 4 days.

andrewe02000

Another post for the day. 1 month and 3 days.

Sent from my Pixel 4a using Tapatalk

andrewe02000

@normis 1 month 2 days. Can we get a response to this in the forums or on our support tickets?

andrewe02000

I understand this. But the fact was we weren't maxing out our 1036 it was overpowered but we still didn't have a 10-gig interface. Even after disabling all of the firewall rules on this unit we still have problems with it being able to do line rate with what it says it can do without errors. Just la...

andrewe02000

I am just going to post here every day this goes unanswered in the forum and my support ticket.SUP-37056 opened on Dec 21, 2020 11:30 EST goes unanswered. STILL NO ANSWER 1 MONTH LATER.

andrewe02000

I replaced the 2004 with 1036+10g edgeswitch XP from ubnt. it is not an ideal solution, but the packet loss of the 2004 is unbearable. I am going to rma everyone of them i see packet loss also on RJ01 on them. I just sent my RMA request as well to ISPSupplies.com as well. Maybe I can get a Festivus...

andrewe02000

Oh also of note trying to generate support.rif crashes the router horribly and requires physically removing power from the unit. Lovely.

andrewe02000

My carrier has been helpful on scheduling a 10G port upgrade on my 1G ELAN going to the CCR2004 to see if this helps on the 22nd. If this does not fix the issues I am shipping these back. Resume pulling hair out.

andrewe02000

At this point both units are bricks to me and I am going to return the units I purchased as they are paper weights and no response from the vendor. I get that we have COVID going on right now but a brand new product with multiple people having the same issue deserves an answer I would think. My netw...

andrewe02000

I opened a support ticket on 12/21/2020 and still no response! This is obviously an issue and we deserve answers. Anyone else had luck with a support ticket?

andrewe02000

I have the same problem and opened a ticket with no response over 2 weeks ago. Very annoying. The odd thing is that im only getting the tx drops on the interface going to my elan. At first I thought it was an mti mismatch but have since ruled that out. I even put a CRS309 in between my ELAN and my C...

andrewe02000

I have the same problem and opened a ticket with no response over 2 weeks ago. Very annoying. The odd thing is that im only getting the tx drops on the interface going to my elan. At first I thought it was an mti mismatch but have since ruled that out. I even put a CRS309 in between my ELAN and my C...

andrewe02000

Mikrotik support just acknowledged the issue and was able to reproduce it but they don't have an ETA yet as of last week. :(

andrewe02000

Tank you for the feedback. I am probably going to try a few different setups to see what works the best. Unfortunately I am having issues with MTU with VRRP with CHR where you cant set the MTU on the VRRP interface higher than 1500 or on any sub interfaces such as VLANS. Support was able to reproduc...

andrewe02000

I have R1 and R2 routers that have VRRP setup on ether1 on which BGP will occur with the ISP. The ISP have initialized a BGP1 session with its own /30 IP range and a secondary BGP2 session with its own separate /30 IP range. How can I setup two separate VRRP interfaces so that on R1 BGP1 is on VRRP1...

andrewe02000

This is my basic BGP filtering setup that I wanted to share for others to help clean up the internet. Don't forget to drop your own networks inbound. /routing filter add action=discard bgp-as-path="\\b(0)\\b" chain=bgp_in_filter comment=\ "Reserved RFC7607" add action=discard bgp...

andrewe02000

Does anyone here have an active ONOS implementation using Mikrotik with openflow?

andrewe02000

Load distribution between cores can be done without multithreading. https://www.youtube.com/watch?v=NbfKplzda7I Yes, I have seen that video. It appeared to me that it was one core per session which will help but with the growing routing tables sizes I think it would be a game changer to have multi-...

andrewe02000

What I'm really asking then is not for BGPq3 to support mikrotik but to be able to automate routing filters directly from ROS7 with or without BGPq3 from IRR records. Whether it be ARin, RADB, or other IRRs.

andrewe02000

I am curious if your implementation of bgp will be one core per bgp session or if it will truly be multi-threaded with one bgp session using multiple cores.

andrewe02000

Is it possible to add this to have automated routing policies from the IRRs?

andrewe02000

Currently work in progress Thank you @mrz I am super excited to start playing with whatever you release and give feedback for BGP. I cannot wait to be able to finally share full routing tables between my edge routers to have a truly blended table of all connections let alone to start filtering out ...

andrewe02000

Its to bad we can't have a Virtual MUM... Hint Hint. Wink Wink. Maybe a possibility. I would still enjoy a format like this.

andrewe02000

I have three routers. Router A=> <=Router B=> <=Router C>. A default route exists on Router A to my provider. All routers are setup with OSPF and all internal routes function as normal. Router A has Redistribute Default Route always as type 1. Router B has Redistribute Default Route never. Router C ...

andrewe02000

4x4 MIMO would be greatly appreciated. All the antennas we use currently for Telrad are 4x4 which offers better coverage in the country. Also most of the small cell antennas are 4x4 such as https://www.commscope.com/catalog/anten ... x?id=53481 which we use.

andrewe02000

It's only a matter of time before RPKI becomes a standard for most IP transit peerings. This is a feature we desperately need to keep using MikroTik routers to peer into the DFZ.

BGP FlowSpec is also important for DDoS mitigation.

+1 for BGP Flow Spec as well.

andrewe02000

ROS didn't use Quagga and no there will not be FRR.

What about RPKI? Is it being discussed at least?

andrewe02000

I would also like to see CBRS as I currently run a Telrad Network for band 48. Having the power of ROS on top of CBRS would be a game changer for us.

andrewe02000

3550 - 3700 (CBRS) works great for people in the USA. https://www.fcc.gov/wireless/bureau-divisions/broadband-division/35-ghz-band/35-ghz-band-citizens-broadband-radio Eventually you'd need a software feature for the radios to talk to the SAS (spectrum access database). It looks like we could make ...

andrewe02000

Please add BGP RPKI Filtering.

https://www.arin.net/resources/manage/rpki/

andrewe02000

Please implement NAT64/DNS64 persistent Carrier Grade NAT for those of us that would prefer not to buy a giant A10Networks ThunderCGN.

TAYGA is one open source implementation. http://www.litech.org/tayga/

andrewe02000

Please add ability for LTE equipment to interface with a CBRS SAS. https://cbrs.wirelessinnovation.org/release-1-standards-specifications Really hoping Mikrotik will extend its LTE AP line to the CBRS band in the US for Indoor Category A devices and Outdoor Category B Devices. I wantz to buy a lot. :)

andrewe02000

I would also get a lot of use from this. Please Implement.

andrewe02000

Thank you for the response. I did figure out to reset them. I've been meaning to post back on this for a bit. I would love to see a feature added to ROS to allow the ability to choose whether to use the old devices MAC addresses or just accept the MAC addresses of the new device. Unless there is way...

andrewe02000

+1 for this!

andrewe02000

Thank you for listening and looking into it.

andrewe02000

OK I know why its not working now but I'm at a loss as to why its like this. both of the CR1036-12G-4S routers have the same MAC addresses on the ports. Shouldn't the MAC addresses be different between devices? Why would this be like this?

andrewe02000

I have two CCR1036-12G-4S in production use with ROS v6.25 on each. SFP4 of the first router and SPF1 of the second router is connected to a fiber E-LINE between the two. I am able to pass all traffic normally except that the two CCR1036-12G-4S routers cannot ping each other. The first CCR1036-12G-4...

andrewe02000

I am requesting that the ability to specify the listening interface for the dns service so a firewall rule doesn't have to be written every time an ip is added to the router. I shouldn't have to drop packets because the dns service is listening on all ports. This way theres less overhead as no packe...

andrewe02000

I'm requesting that Suricata be included in ROS 7.

andrewe02000

Where is the latest .FWF file for RB2011UiAS-RM? It's not on routerboard.com. Thank You

andrewe02000

I have 2 RB450Gs connected to each other on ports 2 to 2 and 3 to 3. I then have ports 2 and 3 bonded on each RB450G with active backup set and port 2 set as primary. The connection is established at a gigabit rate but when I speed test from RB450G to RB450G using the built in BTest tool I don't get...

andrewe02000

I would love to see a competitive alternative to RadUSA's TDMoIP SFP gateways that ar $800+. You make fiber SFPs... How about showing TDMoIP some love.

andrewe02000

Its a cloud core and i'll work on getting a config.

andrewe02000

All I would really like to see is this http://meraki.cisco.com/technologies/layer-7-visibility implemented as a feature in ROS. I would like to know from someone at Mikrotik if there is work being done on this and or Suricata. Any feedback from Mikrotik would be much appreciated as this would add gr...

andrewe02000

I have a public address space with a gateway of "x.x.x.1" on a router provided by our fiber provider. On our Mikrotik router connected to the fiber router we have a bridge with an IP of "x.x.x.2". When I speedtest from a host even though the gateway is set to "x.x.x.1" ...

andrewe02000

Did you look at this page from the wiki? I was checking it out because I want to setup a simple queue on my virtual AP subnet http://wiki.mikrotik.com/wiki/Manual:Queue#Simple_Queues Thank you. Yes I did look at that and tried to implement it although it did not appear to have any affect on the ban...

andrewe02000

So I want to limit the download and upload speed of a customer on my network. The customer has a public IP address of x.x.x.39 and the Cloud Core is set as a public bridge with the ip x.x.x.2 with gateway x.x.x.1
How do I configure the simple queue? Thank You.

andrewe02000

you'd better ask your ISP to route that address block to you, not to bridge. I would but I don't have my ASN in place yet. Can I have them route it to me without it? I didn't think you could do that. Even with the IP's assigned to me I would like to have a single port be the gateway for both networ...

andrewe02000

Is there a repository that we can get the most recent beta software from to add to the auto upgrade feature? Thanks.

andrewe02000

I see that a few have viewed this page but no help yet. Anyone have any ideas on how this can be done? Thank You.

andrewe02000

I have the following network spaces. IP's are changed to keep anonymous. Public Network: 183.90.145.0/25 Public Gateway: 183.90.145.1 This is a Cisco router where I get a hand off from our ISP. Internal Private Network: 192.168.20.0/21 Private Gateway:192.168.20.1 I want to use only 2 ports on the c...

andrewe02000

Browse the et repository via http. its very comprehensive.

I did parse through the library and yes there is an extensive list of IDS/IPS rulesets but not an extensive protocol detection support as nDPI. Maybe I'm missing something but I really don't see them.

andrewe02000

Browse the et repository via http. its very comprehensive. As long as I can see what traffic is on my network I will be happy. Suricata... nDPI... as long as there is going to be future support for DPI. That's all I'm looking for for right now. I would like to hear from Mikrotik on whether/when it ...

andrewe02000

Do you have a more direct link? I'm having trouble finding a list of protocols for layer 7 visibility.

andrewe02000

How about being able to plug your Android phone or tablet into the USB port. Think of the touch LCD screen on the cloud core router but now on steroids.

andrewe02000

I have heard of them but haven't looked in a while. I agree that being able to mark packets is a huge plus. Me personaly I want the same functionality that we get with our Meraki switches but having IDS/IPS ability is a definite plus. Does suricata have the same protocol detection support as nDPI? L...

andrewe02000

I am requesting that nDPI be made available in ROS for the cloud core. I believe this is possible now due to being able to leverage the performance of the Cloud Core Platform. Thank You.

Search found 73 matches