I don't know if you have seen your device but combo port is different than eth1
Because e5-2650 v2 is an 8 Core Processor!my cpu is 2650v2First of all you should have CPU on Physical Server and be sure that Hyperthreat is disabled!
when i set 9 core or 10 ,11,12,...
not start my vm and i give error
so that 8 core i havent error and run vm carefully
ip firewall filter add chain=input in-interface=vlan-x out-interface=vlan-y action=drop
PADo is option that you can set on PPPoE Server Service in MIkrotik not in Switch!How Increase PoD For vlan 100 Example By switch ??? Please Share me Solution
Have you seen this oneWhat will be the next products of hap ac^2 ??
If router is not rebooted for all monthThe interface menu retains total bytes/packets in/out for each interface. You can copy out the numbers on the first of each month than zero it for next month.
ip firewall nat> add action=src-nat chain=srcnat src-address=192.168.0.6 to-addresses=213.212.xxx.62
I did not mean that but their processor is becoming old now and cannot take care for new targets or security!This does not mean that every 2011 should have problems too..!
ip firewall nat add chain=dstnat dst-address=your_Pulic_IP protocol=tcp dst-port=Public_Port action=dst-nat to-addresses=your_LAN(Device)_IP to-ports=devide_Port