Anyone else running the latest RC's noticing a big jump in throughput? Previously I have never seen much more than 400-450Mbps in real world throughput. All of the sudden I am seeing numbers that are peaking in the 600-650Mbps range.

Client is 2016 Mbpro 15"

The latest OS X and iOS betas work fine with L2TP/IPSec VPN. If configured properly what works in iOS 9 should work fine in iOS 10. On iOS you sometimes need to delete and re-add the profile even if you have all setting entered correctly.

These fans are almost silent and a night and day improvement over the stock fans in terms of noise profile. I also tried some of the Sunon 40mm fans recommended in other forum threads and found they are not much of an improvement over the stock fans. http://www.frozencpu.com/products/16389/fan-1014/...

It depends...are you planning on running it encrypted?

If not RB1100 or better should be fine.

For 1 Gbps Tcp with EoIP + encryption you are probably going to have to go with some relatively beefy x86 on both sides of the tunnel.

43North Found the solution! The key is the disable Auto Negotiation on the MikroTik SFP interface and it linked right up!! Thank you for posting the solution. Turning off auto-negotiation also fixed a problem I was having establishing a link between a CCR1036-12G-4S & a CRS125-24G-1S-RM using Mi...

Depends on the type of tunnel....and encyption settings. Under optimal real world cobditions Single tunnel site to site... tcp nat'd/tunnel mode or ipip over ipsec/transport mode: 2011= 20Mbps ...give or take 850= 40-50Mbps 1100= 400Mbps CCR Series = 150Mbps I have never benchmarked eoip/gre etc..bu...

300Mbps is around the maximum real world nat'd WAN-Lan throughput with a basic/efficient firewall in place and no queuing. I am not sure what effect queuing will have, but my guess would be that 175Mbps on a RB850 should not be an issue. If you want more headroom throughput wise in a similar form fa...

Up to around 300 Mbps WAN-LAN throughput should not be a problem with an RB850Gx2. If you need more than that, look @ RB1100 or CCR1009.

Short answer no. More detailed answer: The release of 6.24 might have improved ipip/eoip over ipsec throughput but my understanding is that the CCR's are capable of 400-500Mbps single tunnel performance for nat'd vpn tunnels depending on encryption, and closer to 150Mbps single tunnel performance wh...

If you are having stability problems with the uap-ac make sure you are not using 80mhz channel width. I have not experienced the same 80Mhz channel width issues with MKTK or Apple 802.11ac AP's. Without knowing the layout/construction methods/size of your home/rf environment and your throughput expe...

Would love to see a feature like this added to ROS.