Community discussions

Search found 67 matches

by Ascendo
Fri May 18, 2018 12:23 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2018 - New hardware incoming
Replies: 52
Views: 18087

Re: MUM Europe 2018 - New hardware incoming

Where can we find information about switch packet buffers?
by Ascendo
Fri Mar 23, 2018 4:28 pm
Forum: RouterBOARD hardware
Topic: WAP LTE
Replies: 2
Views: 582

Re: WAP LTE

There is stock of them where I stay.
by Ascendo
Fri Mar 23, 2018 3:45 pm
Forum: RouterBOARD hardware
Topic: WAP LTE
Replies: 2
Views: 582

WAP LTE

Hi all

We usually buy WAP LTE devices for wifi with 3G/4G connectivity, but there seems to be no stock anywhere. Would we be able to build something similar with Basebox 2 + R11e-LTE mini-PCIe card? If so, what antennas should we use?

Thanks

A
by Ascendo
Thu Feb 08, 2018 1:51 pm
Forum: Virtualization
Topic: CHR - License - Unable to connect
Replies: 1
Views: 608

Re: CHR - License - Unable to connect

Problem solved - some ISP between us and Mikrotik infrastructure was filtering some routes.

Latest Hyper-V CHR image is definitely still corrupt though - "Missing Operating System" when powering on.
by Ascendo
Thu Feb 08, 2018 11:30 am
Forum: Virtualization
Topic: CHR - License - Unable to connect
Replies: 1
Views: 608

CHR - License - Unable to connect

Hi all

I'm experiencing difficulty getting CHR to talk to the license server - it just says "connection timed out". This seems to happen on all versions except the RC releases (the latest RC one seems to be corrupted as well, so can't use that either!)

Any ideas?

Thanks

A
by Ascendo
Mon Aug 21, 2017 11:32 am
Forum: RouterBOARD hardware
Topic: GRE tunnel performance?
Replies: 4
Views: 2237

Re: GRE tunnel performance?

90/90 on a 2011 is impressive! RB1100AHx2/4 or CCR1009 should easily get you line rate, probably with encryption too.
by Ascendo
Thu Jul 20, 2017 7:32 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM - Hardware specification
Replies: 34
Views: 7391

Re: CRS317-1G-16S+RM - Hardware specification

Can you do interface bonding with the CRS317? In SwOS the link aggregation on CRS317 is supported at hardware level. In RouterOS it will become available in future. https://wiki.mikrotik.com/wiki/SwOS/CRS317#LAG Great, thanks. Any information on the packet buffer size? We often have problems with p...
by Ascendo
Wed Jul 19, 2017 7:39 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM - Hardware specification
Replies: 34
Views: 7391

Re: CRS317-1G-16S+RM - Hardware specification

Can you do interface bonding with the CRS317?
by Ascendo
Tue May 23, 2017 10:07 pm
Forum: General
Topic: EoIP - are BPDUs tunneled?
Replies: 8
Views: 1305

Re: EoIP - are BPDUs tunneled?

No problem! Live migration, ESXi or KVM?
Neither...Hyper-V :)
by Ascendo
Tue May 23, 2017 8:50 pm
Forum: General
Topic: EoIP - are BPDUs tunneled?
Replies: 8
Views: 1305

Re: EoIP - are BPDUs tunneled?

To be honest I'd start with spanning-tree unless you have significant issues with ports flapping. Remember you can also bring spanning-tree up on the EoIP bridges (on the RBs). If you are looking for load balancing you could do an etherchannel between the sites. You could build on the redundancy by...
by Ascendo
Sun May 21, 2017 9:20 am
Forum: General
Topic: EoIP - are BPDUs tunneled?
Replies: 8
Views: 1305

Re: EoIP - are BPDUs tunneled?

Well this is embarrassing: I checked the remote end there was no BPDU filtering enabled. However the local side looks like this: interface GigabitEthernet1/0/23 switchport mode trunk load-interval 30 spanning-tree bpdufilter enable So that would explain the no BPDUs in either direction! While on thi...
by Ascendo
Sat May 20, 2017 5:11 pm
Forum: General
Topic: EoIP - are BPDUs tunneled?
Replies: 8
Views: 1305

EoIP - are BPDUs tunneled?

We have EoIP between two sites (RB1100AHx2, 6.32) and it's working great. At either end we are running Cisco switches with RAPID-PVST. We are noticing that BPDUs sent from site A do not get to site B and vice versa. Is this by design? Is there a way to make it work? While on the subject, can you set...
by Ascendo
Fri May 19, 2017 6:08 pm
Forum: RouterBOARD hardware
Topic: RB - AES HW encrypt desc removed ?
Replies: 8
Views: 1183

Re: RB - AES HW encrypt desc removed ?

Yes, in perfect conditions AHx4 will be twice as fast as AHx2.
That's great, since we can get nearly Gbit on x2 right now.
by Ascendo
Fri May 19, 2017 5:58 pm
Forum: RouterBOARD hardware
Topic: RB - AES HW encrypt desc removed ?
Replies: 8
Views: 1183

Re: RB - AES HW encrypt desc removed ?

AHx4 can outperform CCR in single stream setups, but total HW accelearion throughput on CCRs is better.
Now for the $64000 question - can the AHx4 outperform AHx2 in single stream?
by Ascendo
Tue May 16, 2017 9:17 am
Forum: RouterBOARD hardware
Topic: Set CPU frequency to 1200MHz on ccr1072
Replies: 22
Views: 3498

Re: Set CPU frequency to 1200MHz on ccr1072

@Ascendo For DDoS we're highly specialized on that. For uplinks and edge we use ASR9k. As distribution nexus. But we're now creating a parallels network and mikrotik seems to be fine. This is the project we're building http://seflow.net/2/index.php/en/blog/seflow-european-network-expansion-roadmap ...
by Ascendo
Mon May 15, 2017 12:43 pm
Forum: RouterBOARD hardware
Topic: Set CPU frequency to 1200MHz on ccr1072
Replies: 22
Views: 3498

Re: Set CPU frequency to 1200MHz on ccr1072

Interesting use case for Mikrotik. Do you have any strategy in place for DDoS attacks? How well is the 1072 handling that many peers? For DDoS - Andrisoft Wanguard + RTBH and Source-based blackhole - (set RP Filter to Loose is an absolute must - https://forum.mikrotik.com/viewtopic.php?t=114664). Y...
by Ascendo
Mon May 15, 2017 10:45 am
Forum: RouterBOARD hardware
Topic: HAP AC vs WAP AC
Replies: 4
Views: 1061

Re: HAP AC vs WAP AC

About 12 clients, mostly 5ghz. That is the total size - the house is mostly a rectangular shape and is very open, except for the bedrooms which are down a small passage. The other option is keep the AC Lite and connect it to Ethernet over powerline (in addition to another AP).
by Ascendo
Mon May 15, 2017 9:44 am
Forum: RouterBOARD hardware
Topic: HAP AC vs WAP AC
Replies: 4
Views: 1061

Re: HAP AC vs WAP AC

Indoor only, single floor, 300sqm. Internet connection is 100mbps. Mix of 2ghz and 5ghz clients.
by Ascendo
Mon May 15, 2017 9:21 am
Forum: RouterBOARD hardware
Topic: HAP AC vs WAP AC
Replies: 4
Views: 1061

HAP AC vs WAP AC

Hi all

Have a home coverage issue when using an HAP AC Lite - the coverage is not quite good enough for weaker mobile devices. Running cabling and adding an additional AP is not an option.

Which of the above devices would offer better range? Or is there a better Mikrotik option?

Thanks

A
by Ascendo
Mon May 15, 2017 7:58 am
Forum: RouterBOARD hardware
Topic: Set CPU frequency to 1200MHz on ccr1072
Replies: 22
Views: 3498

Re: Set CPU frequency to 1200MHz on ccr1072

Interesting use case for Mikrotik. Do you have any strategy in place for DDoS attacks? How well is the 1072 handling that many peers?
by Ascendo
Fri May 12, 2017 8:33 am
Forum: RouterBOARD hardware
Topic: RB1100AHx4 Dude Edition
Replies: 52
Views: 12452

Re: RB1100AHx4 Dude Edition

Can you get a full BGP table into 1GB? Is it upgradeable?
by Ascendo
Thu May 11, 2017 10:05 am
Forum: RouterBOARD hardware
Topic: RB1100AHx4 Dude Edition
Replies: 52
Views: 12452

Re: RB1100AHx4 Dude Edition

Anyone have a release date for this? I'm ready to upgrade all of my sites and this unit would cover just about every use I can think of.
Available in stock with some suppliers already.
by Ascendo
Fri May 05, 2017 8:26 am
Forum: General
Topic: v6.40.rc4 GRE-IPSec SMB
Replies: 15
Views: 2149

Re: v6.40.rc4 GRE-IPSec SMB

It is faster with multiple streams
Fair enough. Do you think the RB1100AHx4 can beat the x2 with low stream count?
by Ascendo
Fri May 05, 2017 8:11 am
Forum: General
Topic: v6.40.rc4 GRE-IPSec SMB
Replies: 15
Views: 2149

Re: v6.40.rc4 GRE-IPSec SMB

200Mbps TCP traffic over single ipsec/eoip tunnel is good result. To increase overall performance you need multiple streams (tunnels)
RB1100AHx2 from 5 years ago can do 500mbps+ on a TCP single stream on one EoIP+IPSEC tunnel. 700mbps with multiple TCP streams. Should the CCR not be faster?
by Ascendo
Thu May 04, 2017 8:33 pm
Forum: General
Topic: v6.40.rc4 GRE-IPSec SMB
Replies: 15
Views: 2149

Re: v6.40.rc4 GRE-IPSec SMB

What is your clamp MSS setting on the EoIP? If you disable encryption how much faster is it?
by Ascendo
Thu May 04, 2017 4:54 pm
Forum: General
Topic: v6.40.rc4 GRE-IPSec SMB
Replies: 15
Views: 2149

Re: v6.40.rc4 GRE-IPSec SMB

If you copy a number of files at once, does it increase the throughput?
by Ascendo
Thu May 04, 2017 3:53 pm
Forum: General
Topic: v6.40.rc4 GRE-IPSec SMB
Replies: 15
Views: 2149

Re: v6.40.rc4 GRE-IPSec SMB

What CPU usage are you seeing during that copy?
by Ascendo
Thu May 04, 2017 2:26 pm
Forum: General
Topic: v6.40.rc4 GRE-IPSec SMB
Replies: 15
Views: 2149

Re: v6.40.rc4 GRE-IPSec SMB

Looks very low. Can you force it to AES128 and see if there is improvement? May also be getting fragmentation issues.
by Ascendo
Mon Mar 27, 2017 9:05 pm
Forum: RouterBOARD hardware
Topic: HAP AC & AC Lite PoE Out
Replies: 2
Views: 642

Re: HAP AC & AC Lite PoE Out

Thanks. Found the information in the quick start guide too...should probably have checked there first!
by Ascendo
Sun Mar 26, 2017 10:14 pm
Forum: RouterBOARD hardware
Topic: HAP AC & AC Lite PoE Out
Replies: 2
Views: 642

HAP AC & AC Lite PoE Out

Hi all Perhaps a stupid question, but is it possible to connect non passively powered Ethernet devices to port 5 on these routers (e.g. switch, PC, printer etc) without causing damage? I see some other devices have an auto detection feature for the PoE out port but the brochure does not make mention...
by Ascendo
Mon Mar 20, 2017 7:00 am
Forum: General
Topic: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)
Replies: 134
Views: 26822

Re: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)

We have deployed this to a couple of small, low bandwidth remote sites (CCR1009) and are happy to report that the performance is now exactly what it should be. Will hopefully do some testing this week with more throughput but so far so good.. @Ascendo: What throughput do you get with IPSec on CCR10...
by Ascendo
Mon Mar 13, 2017 7:48 am
Forum: General
Topic: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)
Replies: 134
Views: 26822

Re: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)

We have deployed this to a couple of small, low bandwidth remote sites (CCR1009) and are happy to report that the performance is now exactly what it should be. Will hopefully do some testing this week with more throughput but so far so good. @MT - thanks for getting this sorted. Hopefully it'll be p...
by Ascendo
Sun Mar 12, 2017 6:14 pm
Forum: General
Topic: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)
Replies: 134
Views: 26822

Re: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)

So I did some additional testing, I can actually push around 800Mbit with a UDP flow and CPU usage is pretty good. However, when I run a TCP benchmark, CPU usage is very high (networking/cpu under profile) which I believe is constraining the TCP throughput now. I think I may have an issue with frag...
by Ascendo
Sun Mar 12, 2017 4:50 pm
Forum: General
Topic: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)
Replies: 134
Views: 26822

Re: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)

So I did some additional testing, I can actually push around 800Mbit with a UDP flow and CPU usage is pretty good. However, when I run a TCP benchmark, CPU usage is very high (networking/cpu under profile) which I believe is constraining the TCP throughput now. I think I may have an issue with frag...
by Ascendo
Sat Mar 11, 2017 3:37 pm
Forum: General
Topic: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)
Replies: 134
Views: 26822

Re: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)

Nathan1, what sort of speeds are you getting per flow, and how high is the latency between the devices? At least there is some progress... Latency is .7ms RTT and I was seeing around 300Mbit, very similar to the ctr. Blasting UDP peaks around 350Mbit, in clear I can push 1Gbit. I was only able to b...
by Ascendo
Sat Mar 11, 2017 2:03 pm
Forum: General
Topic: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)
Replies: 134
Views: 26822

Re: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)

Nathan1, what sort of speeds are you getting per flow, and how high is the latency between the devices? At least there is some progress... Latency is .7ms RTT and I was seeing around 300Mbit, very similar to the ctr. Blasting UDP peaks around 350Mbit, in clear I can push 1Gbit. I was only able to b...
by Ascendo
Sat Mar 11, 2017 9:55 am
Forum: General
Topic: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)
Replies: 134
Views: 26822

Re: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)

Nathan1, what sort of speeds are you getting per flow, and how high is the latency between the devices? At least there is some progress...
by Ascendo
Thu Feb 23, 2017 8:34 pm
Forum: General
Topic: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)
Replies: 134
Views: 26822

Re: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)

Glad to see this issue is getting attention still. Been waiting to see a fix on it ever since Alex brought it up at the 2016 US MUM.
An actual update from Mikrotik staff would be great...
by Ascendo
Fri Feb 17, 2017 6:34 pm
Forum: General
Topic: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)
Replies: 134
Views: 26822

Re: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)

We've been struggling to get GCM (i.e. software only encryption) working between our CCR1009s and Cisco ASAs. As such I'm in a real pickle having recommended Mikrotik. We'll take any kind of workaround right now (e.g. run CCR1009 as single core router) until there is a proper fix. For now, RB1100AH...
by Ascendo
Fri Feb 17, 2017 8:32 am
Forum: General
Topic: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)
Replies: 134
Views: 26822

Re: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)

We've been struggling to get GCM (i.e. software only encryption) working between our CCR1009s and Cisco ASAs. As such I'm in a real pickle having recommended Mikrotik. We'll take any kind of workaround right now (e.g. run CCR1009 as single core router) until there is a proper fix. For now, RB1100AHx...
by Ascendo
Tue Jan 10, 2017 8:19 pm
Forum: General
Topic: RB3011 IPSEC Hardware Encryption?
Replies: 17
Views: 5891

Re: RB3011 IPSEC Hardware Encryption?

How much IPSEC throughput can it do currently (software only)?
by Ascendo
Wed Dec 21, 2016 1:03 pm
Forum: RouterBOARD hardware
Topic: RB750Gr3 - Report and questions
Replies: 112
Views: 33414

Re: RB750Gr3 - Report and questions

So just to confirm what i am reading, Hex v3 to Strongswan ipsec in transport will yeild somewhere around 100Mbits, and in tunnel can yield more? I want to put one of these in front of my 2011 for the aes128 HW encryption wanna make sure i can hit at least 75/75 Finally received a RB750Gr3 yesterda...
by Ascendo
Mon Nov 28, 2016 8:58 pm
Forum: General
Topic: CCR to replace old L4 firewall
Replies: 1
Views: 514

CCR to replace old L4 firewall

We are looking to replace a pair of old Cisco ASA5510 firewalls with something like a CCR1036 (obviously a pair in VRRP for HA). We just need basic L4 firewalling/NAT (Netflow would be nice too), but have about 350 access rules in place. Will this many access rules cause a problem for the 1036 model...
by Ascendo
Wed Sep 28, 2016 11:19 am
Forum: General
Topic: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)
Replies: 134
Views: 26822

Re: Is re-ordering fixed yet with IPSec and hardware acceleration? (Updating thread)

I wonder if this is related to the issue we are having with the RB1100AHx2: after some time (1-2days) encryption drops from 500+mbps to around 20mbps. Our solution is to disable/enable the IPSec encrypted EoIP tunnel with the scheduler. We gave up with support on this as our workaround only results ...
by Ascendo
Fri Mar 25, 2016 10:48 pm
Forum: Wireless Networking
Topic: CAPsMAN slave cap interfaces - incorrect password
Replies: 1
Views: 630

Re: CAPsMAN slave cap interfaces - incorrect password

Problem fixed...lack of understanding of CAPsMAN on my side.
by Ascendo
Fri Mar 25, 2016 6:15 pm
Forum: Wireless Networking
Topic: CAPsMAN slave cap interfaces - incorrect password
Replies: 1
Views: 630

CAPsMAN slave cap interfaces - incorrect password

As per subject, I'm using CM2 and if I create slave cap interfaces (to support multiple SSID per radio), I cannot authenticate from the client devices to the slave interface at all (simple wpa2-psk).

Any ideas what could be causing this?
by Ascendo
Tue Mar 01, 2016 7:56 pm
Forum: General
Topic: VRRP and mangle rules question
Replies: 1
Views: 346

VRRP and mangle rules question

We are running VRRP on a VLAN interface on our CCR1036.

If we create mangle rules referencing the parent interface, will the rules apply for the VRRP interface as well? We want rules to work whether or not the interface is currently active. Or do we need to duplicate the rules for both interfaces?
by Ascendo
Tue Feb 23, 2016 9:00 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 189561

Re: Cloud Hosted Router

I bought a p1 license ,but the CHR's license is still free,how can i make it work ? i tried to renew and also restarted the CHR,but it is still free [admin@MikroTik] > /system license renew account: *** password: ************ level: p1 status: done [admin@MikroTik] > /system license print system-id...
by Ascendo
Mon Jan 18, 2016 7:48 am
Forum: RouterBOARD hardware
Topic: RB3011UiAS-RM
Replies: 102
Views: 52585

Re: RB3011UiAS-RM

Disappointing that the PSU isn't inside the case.
by Ascendo
Thu Feb 26, 2015 9:31 am
Forum: General
Topic: CCR1009 or RB1100AHx2 for EoIP+IPSec
Replies: 17
Views: 7831

Re: CCR1009 or RB1100AHx2 for EoIP+IPSec

Yes, I believe I've set this up. I haven't tried this configuration before, so you'll want to look at the config with some skepticism. Still, I see the SA byte counters moving, so it looks like the traffic is crossing both the EOIP tunnel and the IPSEC. Here's one side: # feb/24/2015 20:34:11 by Ro...
by Ascendo
Thu Feb 26, 2015 7:24 am
Forum: General
Topic: CCR1009 or RB1100AHx2 for EoIP+IPSec
Replies: 17
Views: 7831

Re: CCR1009 or RB1100AHx2 for EoIP+IPSec

If you have some time, would you be able to create an EoIP tunnel and encrypt the endpoints? I would be very keen to see if your performance drops 90%+ like it did for us.
by Ascendo
Mon Feb 23, 2015 9:53 pm
Forum: General
Topic: CCR1009 or RB1100AHx2 for EoIP+IPSec
Replies: 17
Views: 7831

Re: CCR1009 or RB1100AHx2 for EoIP+IPSec

Just an update here for anyone interested. After extensive tweaking and simplification of the config, we've managed to extract around 680mbit/sec out of the two RB1100AHx2 routers (including clocking them up to 1333MHz). We bought 2xCCR1009s for another project, and decided to see how fast they woul...
by Ascendo
Tue Feb 17, 2015 10:18 pm
Forum: General
Topic: Etherchannel on top of EoIP
Replies: 0
Views: 353

Etherchannel on top of EoIP

Hi all

As per subject, is this possible? We want to create an Etherchannel between two Cisco switch stacks over two separate EoIP links created with Mikrotik routers. Gut feel says it will work, but searching has produced nothing of any attempts to do this.

Thanks

A
by Ascendo
Wed Oct 29, 2014 4:57 pm
Forum: General
Topic: EoIP + Cisco Macsec
Replies: 2
Views: 1274

EoIP + Cisco Macsec

Hi all

Does anyone know if Cisco MACsec/Trustsec encryption will function across two Mikrotik routers providing EoIP connectivity between two networks?

This does not work over a L2 VLAN or L2 QinQ connection, which is all the carrier can offer between the sites.

Thanks

A
by Ascendo
Sun Aug 17, 2014 11:43 am
Forum: General
Topic: Proxy ARP question
Replies: 2
Views: 588

Proxy ARP question

Hi all From http://wiki.mikrotik.com/wiki/Manual:IP/ARP " router with properly configured proxy ARP feature acts like a transparent ARP proxy between directly connected networks." Will a Mikrotik router respond to ARP requests to an IP not directly connect if it has a route to that IP? I have this r...
by Ascendo
Fri Aug 15, 2014 11:05 am
Forum: General
Topic: CCR1009-8G-1S-1S+ full BGP table
Replies: 3
Views: 950

Re: CCR1009-8G-1S-1S+ full BGP table

Thanks, how long will a full table transfer from a peer take?
by Ascendo
Fri Aug 15, 2014 9:47 am
Forum: General
Topic: CCR1009-8G-1S-1S+ full BGP table
Replies: 3
Views: 950

CCR1009-8G-1S-1S+ full BGP table

Hello everyone

I would like to implement 3 of the above to 3 upstream providers, and run iBGP between them.

Traffic expectation will be around 60-80mbps per provider and they will do routing only.

Do you think it would work, or do I need something more powerful?

Thanks

A
by Ascendo
Fri Jun 13, 2014 7:00 pm
Forum: General
Topic: CCR1009 or RB1100AHx2 for EoIP+IPSec
Replies: 17
Views: 7831

Re: CCR1009 or RB1100AHx2 for EoIP+IPSec

Update: we bought 2 RB1100AHx2 and are running EoIP+IPSec between them across the WAN. Works great, getting over 400mbit/sec! :D
by Ascendo
Tue Jun 10, 2014 12:14 pm
Forum: General
Topic: CCR1009 or RB1100AHx2 for EoIP+IPSec
Replies: 17
Views: 7831

Re: CCR1009 or RB1100AHx2 for EoIP+IPSec

CCR1036 can do up to 3.5GBit of IPsec encrypted traffic
Thanks. I assume that means CCR1009 can do at least 150mbit/sec IPSec. Will combining with EoIP tunneling cause much slowdown? I read in some other thread about IPSec encrypted GRE tunnels being slow - will the same issue affect me here?
by Ascendo
Tue Jun 10, 2014 10:35 am
Forum: General
Topic: CCR1009 or RB1100AHx2 for EoIP+IPSec
Replies: 17
Views: 7831

CCR1009 or RB1100AHx2 for EoIP+IPSec

Hello all We currently link two sites together with L2TPv3+IPSec using Cisco 2900 routers, but the IPSec performance is horrible (max 50mbps @100%CPU). We want to replace with one of the above routers at either side. Obviously CCR is newer but is the IPSec hardware accelerated yet? Will either of th...
by Ascendo
Fri Jan 03, 2014 3:08 pm
Forum: General
Topic: Quickset problem - RB951-2HnD
Replies: 2
Views: 1023

Quickset problem - RB951-2HnD

Greets all Trying to create a wireless ptp bridge (indoor, short distance) with two of the above routers. Have upgraded to 6.7. As soon as I use webfig or winbox quickset function, the router is disconnected and I cannot reconnect. Winbox detects the router on the local segment, but it cannot connec...
by Ascendo
Wed Jun 26, 2013 7:39 am
Forum: General
Topic: RB2011 - PoE input not working
Replies: 2
Views: 2065

Re: RB2011 - PoE input not working

Thank you for the useful information. Will pick some of those up. :D
by Ascendo
Tue Jun 25, 2013 2:03 pm
Forum: General
Topic: RB2011 - PoE input not working
Replies: 2
Views: 2065

RB2011 - PoE input not working

Hi all

I have a new RB2011 which has Eth1 as PoE input. However, when I try supply power through this interface (from a Cisco 2960S), the router does not power on at all. The port on the Cisco is able to power a phone/AP when connected.

Any ideas?

Thanks

A
by Ascendo
Thu Apr 25, 2013 7:16 pm
Forum: Beginner Basics
Topic: RB1100AHx2 default IP address/port
Replies: 1
Views: 2690

RB1100AHx2 default IP address/port

Hi all

Just bought the above router and I need to know the default IP address for the router and which port I can access it on.

Any help appreciated.

Thanks

A
by Ascendo
Sun Oct 14, 2012 9:54 am
Forum: Virtualization
Topic: Hyper-V integration components
Replies: 127
Views: 62937

Re: Hyper-V integration components

The NIC is visible, but does not pass traffic. I've spent many hours trying to get this to work to no avail.
by Ascendo
Mon Sep 10, 2012 7:05 pm
Forum: Virtualization
Topic: Hyper-V integration components
Replies: 127
Views: 62937

Re: Hyper-V integration components

Unfortunately not an option for us (6 data centres, all Hyper-V). We'd pay good money to have even the legacy NIC working (as in ver 4.x).
by Ascendo
Sun Sep 09, 2012 12:10 pm
Forum: Virtualization
Topic: Hyper-V integration components
Replies: 127
Views: 62937

Re: Hyper-V integration components

Unfortunately, since version 5.x, even the "'Legacy NIC" in Hyper-V does not work. RouterOS detects the NIC, but it cannot pass any traffic at all. No ARP, no IP, nothing. :(

I have tried this on multiple different servers/PCs, with Hyper-V 2.0 and 3.0 (Windows 8), and it simply does not work.