Go with the symmetrical horn antennas, i have replaced one 60 degree airmax ac sector with two symmetrical 30 degree horns and they are working excellent. also in lesser space than airmax sectors you get double client capacity as u distribute the load. only thing catch is you cannot use your basebox...

Mikrotik doesn't believe in WISP market, wireless development is arrest and I don't see any resource inside mikrotik to improve wireless communications. They took other roads, unfortunately...I loved mikrotik. You want grow? Change tecnology and prepare to spend more money. As a larger WISP, I am i...

Well i had been facing exactly same issues with Mikrotik NV2,performance degrades after 25-30 clients,latency keeps between 15-20 ms. I have made following changes to my network and now everything has returned to normal. You can try these changes and check if it helps you. 1) all client's are kept ...

What about limiting users? Do you have default queue types?

Can you tell us how do you make limitation to users? Simple-queue on AP? PPPoE?

We use CCR-1036 as B-RAS for bandwidth limiting alongwith radius server for billing and authentication.

As per my experience nstreme performs much better for us in many ways as : 1) AP's mostly BaseBox5 are now having more than 30 clients and all are working well. In nv2 AP's having 25+ clients had very poor response even logging in to cpe was getting impossible. 2) Latency has come down a lot in PTMP...

Yes am also interested in this solution. For SMS sending i want to use SMS gateway api.

By transparent i mean that you have not configured any bridge firewall and have simply created a bridge and added ports to it.

Since i have been testing this new config for last 10 days currently all sectors are having subs in between 25 - 35. Am planning to add more and test the result. Till now everything is working smoothly.

Well i had been facing exactly same issues with Mikrotik NV2,performance degrades after 25-30 clients,latency keeps between 15-20 ms. I have made following changes to my network and now everything has returned to normal. You can try these changes and check if it helps you. 1) all client's are kept i...

And for the failover setup configure RSTP ring on manageable switches at both end.

In mikrotik all vlans are passed by default under transparent bridge configuration.you dont need to add any extra rule for it.

Try these steps to boot into backup firmware. 1) Power off device 2) hold the reset button and power on 3) keep holding the reset button for 5-6 seconds when the led starts blinking for the first time release the button. 4) unit should boot into backup firmware 5) issue command /system routerboard u...

Excellent... Works Flawlessly. Thanks a Lot.

Is it possible that i can pass multiple vlans on the same access port going forward to Basebox5 Sectors ? 1) Will the access ports be configured on CRS or it has to be taken to the Basebox5 and terminate their. 2) Also what needs to be done in case where on the client SXT i need to configure particu...

You need to find your optimum MTU Value for your provider. Follow below instructions to find your optimum value and change accordingly. General instruction for finding your optimal MTU size Go to Start and select Run. Set router to MTU 1500 to start with. Start RUN Type in cmd (Windows 2000/XP/Vista...

CRS Vlan configuration is what i see is not documented properly. Need some expert advice.

Hi all, Need help on achieving below vlan config scenario : CCR1036 configured (Vlan 10 & Vlan 20 on sfp1) Vlan 10 (Running pppoe service) Vlan 20 (Running Hotspot) CCR1036 (sfp1) connected to CRS212-1G-10S-1S+ (sfp1) Now i want to use CRS212 (sfp1) port as uplink to CCR and use rest of the CRS2...

You need to forward ports from public ip to your local dvr ip.: Example : Public IP = 1.2.3.4 DVR Local IP = 5.6.7.8 DVR Local http Port = 1234 DVR Local RTSP Port = 1235 DVR Local Mobile Port = 1236 Your rule for above example will be : /ip firewall nat add action=dst-nat chain=dstnat comment="...

You need to forward both TCP/UDP on Mikrotik to your DVR correctly also for some DVR's i have observed they work fine when they are added into DMZ.

I successfully use one CPE (Mikrotik SXT Lite 5) and put it in station-bridge mode then add a switch and distribute the link further to as many customer with different user id as the total cpe bandwidth supports without any issue.my pppoe nas is also Mikrotik 1100 AHX2.and my ppoe profile is set to ...

What is the connectivity scenario. pppoe, hotspot etc.you might look in to MTU values.

In system enable "PoE over Long Cable" and check again it shud work.

Try changing MTU values to 1480 on customers ADSL Wifi routers

Its very unfortunate for me to have no replies. So many view still waiting for a reply. In the meantime i have upgraded to RB751.

Is their any hope for a reply ??

Hi, I am a MikroTik newbie and have just added RB450 to my network. Although by following guides i have managed to setup hotspot and acces to Internet for my existing LAN but my goal is to setup it as per my requirements mentioned below : Current Scene : 1) MT RB450 - WAN (101.x.x.x) eth1 / LAN (172...