PiVi,

I have just used it with the stock Telstra firmware.

Noticed they are now badged "Netgear" but seem to still work without the directIP connection.

I'll check what firmware its running tomorrow.

Cheers,
Andy

Hello, Apologies on the subject description! I am using RIP to route loopback addresses of a bunch of routers that are running MPLS. This has been working perfectly for a while now. I just added another router to the system, and added a /32 loopback address to it. I then noticed on neighbouring rout...

Hi IPANetEngineer, The link is a licensed 18GHz radio. It supports jumbo frames, and can happily pass 2500 byte pings, with no fragmentation. It is running rock stable, as the back haul network between the sites happily runs at 1-2ms pings and can support over 350mbps throughput. The network runs RI...

Hi, I am having issues with an LDP dynamic neighbour dropping its listed addresses after approx. 10 seconds. On initial connection, all the neighbours addresses appear and I can happily pass traffic over that section of the network using MPLS VPN4. After a few seconds, the LDP neighbour drops all it...

Thanks heaps norpan,
worked perfectly! Didn't need the nat rule it seemed.

Now I can get things rolling!

Hey,

I have come across the same dilemma...

Trying to relay DHCP over a routed MPLS network, from a windows DHCP server, to clients on VRF's across a WAN.

Is there any fix to this? Seems to work fine on Cisco hardware, just stumped on the Mikrotiks.

Cheers,

Andy

Thanks uldis!

Your suggestion worked perfectly!

Cheers,

Andy

Very happy to pay good money for an upgrade. Its become a vital part of our network now... such a nice, intuitive interface!
Please Mikrotik code monkeys, release a new paid version

Hello, I cant seem to make a Sierra Wireless 320U USB LTE dongle work under ROS 6.3 I had no issues with the card under 5.xx, it appeared as a ppp device, and has worked perfectly on many deployed routers. Since upgrading to ROS 6.3 it now appears as an LTE device. I cant " Scan " or get &...

Hi darthtanion, Not sure if you have resolved this yet. I have just been playing with an AirCard 320U and have had good success with one in a RB751 running 5.20 If you just create a new PPP session, you should see a new USB interface "usb2" within the new PPP session. Select "usb2&quo...