Community discussions

MUM Europe 2020

Search found 25 matches

by cleistonrs
Wed Feb 27, 2013 11:40 pm
Forum: General
Topic: How to deliver valid ip to the stations?
Replies: 0
Views: 292

How to deliver valid ip to the stations?

Hi! I want to deliver a valid ip range. I'm using a radius server for authenticating the clients. Today I use a pool 192.168.1.0/24 and then I go to IP>FIREWALL and add a rule for masquerade. But now I want to deliver valid ips for the stations, how do I do that in a way that I can keep the radius s...
by cleistonrs
Sun Feb 03, 2013 7:20 pm
Forum: Forwarding Protocols
Topic: Bonding with OSPF
Replies: 15
Views: 2496

Bonding with OSPF

Hi, Is it possible to make some kind of bonding between two interfaces (ether1 and ether2 both with rocket m5 in a ptp on both sides)using OSPF but with redundance. My goal is distribute the traffic between the two rockets titannium that I have but with redundance in case if one of them goes down. H...
by cleistonrs
Wed Nov 28, 2012 1:16 pm
Forum: General
Topic: Proxy and video cache
Replies: 0
Views: 428

Proxy and video cache

Hello!
Which is the best web and video cache based in Linux for use together with mikrotik?
Have anyone tried this?

Best regards,
Cleiston
by cleistonrs
Fri Nov 23, 2012 1:13 pm
Forum: General
Topic: how to route vlans
Replies: 3
Views: 833

Re: how to route vlans

The VLANs are usually addressed with different sub-nets. That's means, you cannot only one IP address on router. Each VLAN needs own address on router, published as a default gateway. Thank you for your reply, I just have one more question, how do I create trunk to carry all the vlan traffic? Like ...
by cleistonrs
Fri Nov 23, 2012 11:27 am
Forum: General
Topic: how to create a trunk gateway for vlans
Replies: 0
Views: 518

how to create a trunk gateway for vlans

Hello! I created vlans trough my bridge and I can "ping" each other on the same vlan. The problem is that I just have one gateway. (xxx.xxx.xxx.1), and it is assigned to a phisical port on a mikrotik. The question is: How do I route all the vlans with just one ip address for gateway? How can I creat...
by cleistonrs
Fri Nov 23, 2012 1:50 am
Forum: General
Topic: how to route vlans
Replies: 3
Views: 833

how to route vlans

Hello!
I created vlans trough my bridge and I can "ping" each other on the same vlan. The problem is that I just have one gateway. (xxx.xxx.xxx.1), and it is assigned to a phisical port on a mikrotik. The question is: How do I route all the vlans with just one ip address for gateway?

best regards.
by cleistonrs
Sun Nov 18, 2012 1:06 pm
Forum: Forwarding Protocols
Topic: Multiple vlans to a single mikrotik router.
Replies: 0
Views: 705

Multiple vlans to a single mikrotik router.

Hello! I have a network with valid ips and a single router. I want to separate in others networks with vlans. I'm addressing ips at the vlans, and add the vlan to a bridge, the problem is: how do I create a bridge trunk on the router for all vlans? (which is also mikrotik) Ps: I'm not using any swit...
by cleistonrs
Fri Nov 16, 2012 11:25 am
Forum: Forwarding Protocols
Topic: How to route Vlans
Replies: 1
Views: 927

How to route Vlans

Hello, I'm starting to use vlans trought my wireless network, I can "ping" on each routerboard on the same vlan configuring the ip address into the vlan interface. But I have a main router, which also runs mikrotik. The question is: How can I route all those vlans on my mikrotik router? I tried ip a...
by cleistonrs
Tue Oct 16, 2012 2:05 am
Forum: General
Topic: Vlans through wireless
Replies: 1
Views: 577

Vlans through wireless

Hi, I'm trying to set up VLans through a wireless network based on rocket m5 as WDS. I've been following this article http://wiki.mikrotik.com/wiki/Vlans_on_Mikrotik_environment but it seems not to be working for me. After set up VLans on both sides I can't get any traffic. Is this tutorial supposed...
by cleistonrs
Mon Oct 15, 2012 7:07 pm
Forum: Wireless Networking
Topic: Vlans through a wireless PTP (rocket M5 WDS) with mikrotik
Replies: 1
Views: 1244

Vlans through a wireless PTP (rocket M5 WDS) with mikrotik

Hi, I'm trying to set up VLans through a wireless network based on rocket m5 as WDS. I've been following this article http://wiki.mikrotik.com/wiki/Vlans_on_Mikrotik_environment but it seems not to be working for me. After I set up VLans on both sides I can't get any traffic. Is this tutorial suppos...
by cleistonrs
Mon Oct 15, 2012 3:21 am
Forum: General
Topic: Vlans through a wireless PTP with mikrotik
Replies: 0
Views: 339

Vlans through a wireless PTP with mikrotik

Hi, I'm trying to set up VLans through a wireless network based on rocket m5 as WDS. I've been following this article http://wiki.mikrotik.com/wiki/Vlans_on_Mikrotik_environment but it seems not to be working for me. After I set up VLans on both sides I can't get any traffic. Is this tutorial suppos...
by cleistonrs
Mon Oct 01, 2012 1:17 am
Forum: General
Topic: VLan traffic trough a wireless bridge
Replies: 1
Views: 323

VLan traffic trough a wireless bridge

How to carry VLan traffic from a switch through a wireless bridge based on mikrotik for another switch? The VLans came from the switch with link access, and I want create 3 Vlans to separate the broadcast between the cities where I provide internet access. In each city I already have a switch. Do I ...
by cleistonrs
Thu Sep 27, 2012 6:47 pm
Forum: Forwarding Protocols
Topic: trunk for vlans trough a wireless bridge
Replies: 1
Views: 1439

trunk for vlans trough a wireless bridge

How do I create a trunk port using vlans across my mikrotik network? I want to create a VLan port where the packets are tagged when ingress and untaged when regress to the main link, but I want to create one VLan for each citie, the goal is separate the broadcast of each citie where I provide intern...
by cleistonrs
Thu Sep 27, 2012 6:42 pm
Forum: General
Topic: How do I create a trunk port for vlans across the network?
Replies: 5
Views: 1492

How do I create a trunk port for vlans across the network?

How do I create a trunk port using vlans across my mikrotik network? I want to create a VLan port where the packets are tagged when ingress and untaged when regress to the main link, but I want to create one VLan for each citie, the goal is separate the broadcast of each citie where I provide intern...
by cleistonrs
Mon Sep 24, 2012 2:21 pm
Forum: General
Topic: Help configuring VLan interface
Replies: 2
Views: 580

Re: Help configuring VLan interface

Create trunk from A to B with all vlans, and then access to C for one VLAN, and access to D for 2nd VLAN.


How do I do that? I just add new vlan at the bridge?
by cleistonrs
Mon Sep 24, 2012 1:49 am
Forum: Forwarding Protocols
Topic: Help configuring VLan interface on mikrotik PTP
Replies: 0
Views: 547

Help configuring VLan interface on mikrotik PTP

Hi, I want to use VLans on my network, I have a RB1100AHx2 which I receive my link, and I want implement differents vlans for each city that this link goes to. In the RB1100AHx2 where a receive the link on city A, I have a PTP that goes to city B, and from here to cities C and D. If I configure VLan...
by cleistonrs
Sun Sep 23, 2012 11:05 pm
Forum: General
Topic: Help configuring VLan interface
Replies: 2
Views: 580

Help configuring VLan interface

Hi, I want to use VLans on my network, I have a RB1100AHx2 which I receive my link, and I want implement differents vlans for each city that this link goes to. In the RB1100AHx2 where a receive the link on city A, I have a PTP that goes to city B, and from here to cities C and D. If I configure VLan...
by cleistonrs
Thu Sep 20, 2012 7:30 pm
Forum: Wireless Networking
Topic: Interference in the PTP 5.8 in 20 and 40 Mhz
Replies: 7
Views: 1661

Re: Interference in the PTP 5.8 in 20 and 40 Mhz

If you want stable link you don't need 40mhz you need less, 40Mhz will just increase throughput. Make a scan and see what channels are left and try to isolate each other. Thanks again for your answer, but, what you mean by isolate each other, is to use diferent frequences? Have you ever used some t...
by cleistonrs
Thu Sep 20, 2012 2:01 pm
Forum: Wireless Networking
Topic: Interference in the PTP 5.8 in 20 and 40 Mhz
Replies: 7
Views: 1661

Re: Interference in the PTP 5.8 in 20 and 40 Mhz

This behavior is normal for your configuration, it's because 40mhz it's wider and therefore interfere with the others near especially if they are on the same tower. Regards So I must use just one dish if i want to use 40Mhz, or if I use 40 Mhz in all i will get more trouble. I want the help of you ...
by cleistonrs
Thu Sep 20, 2012 4:35 am
Forum: Wireless Networking
Topic: Interference in the PTP 5.8 in 20 and 40 Mhz
Replies: 7
Views: 1661

Interference in the PTP 5.8 in 20 and 40 Mhz

Hello, Why always that i enable the channel width 40 Mhz in my PTP, all the others PTPs in 20 Mhz goes up and down. I want to get more link (stable) in 5.8A+N, but i can't get it because it affects all the others. I'm using XR5, Rocket M5 and another 5.8 called javelin at the same tower with at leas...
by cleistonrs
Tue Sep 18, 2012 6:59 pm
Forum: General
Topic: Help configuring OSPF in a PTP
Replies: 1
Views: 392

Help configuring OSPF in a PTP

I have a PTP with four dishes 34dbi, i want to use OSPF now with one single valid ip class, and two dishes each side. My question is for get this done, is this enough? (In this case I will replace wlan1 e wlan2 with a valid ip class) Configuring the Radio A: /ip address add address=192.168.0.1/24 in...
by cleistonrs
Tue Sep 18, 2012 4:13 am
Forum: General
Topic: RouterBoard process in 100%
Replies: 1
Views: 322

RouterBoard process in 100%

Is a routerboard good enought to process a lot of data, because when I run btest and sometimes a don't get enought traffic and the processing of cpu is in 100%, a pc x86 with 2 GHz is better for processing data or it will be the same.
by cleistonrs
Tue Sep 18, 2012 4:07 am
Forum: General
Topic: Separate download and upload traffic in a P2P
Replies: 2
Views: 914

Re: Separate download and upload traffic in a P2P

Hello, you need OSPF. configure a router in both sides with 2 routes and assign priorities different in both sides, then traffic will go through link1 and return through link2. http://wiki.mikrotik.com/wiki/Setup_Dual_Wireless_Link_with_OSPF Thank you for you answer, just more a few things, Is just...
by cleistonrs
Tue Sep 18, 2012 3:49 am
Forum: General
Topic: OSPF in a single ip class
Replies: 0
Views: 287

OSPF in a single ip class

Hello, I have a network with valid ips in each routerboard, all of them goes for one single gateway. What I need now is increase my bandwidth. Today I get through my PTP 45 Mbps in 5ghz at 27km. I wanna get 90 Mbps by using OSPF, now with two 34 dbi dishes. I'm not an advanced user, so How do I do t...
by cleistonrs
Mon Sep 17, 2012 1:30 am
Forum: General
Topic: Separate download and upload traffic in a P2P
Replies: 2
Views: 914

Separate download and upload traffic in a P2P

Hello! I'm not an advanced user so I want the help of you to separate the upload in a P2P. I have two rockets 34 dbi and a 30 dbi, what I want to do in this P2P is to separate the upload from download traffic. E.g. Interface ether1 (dish 34dbi) => download traffic ether2 (dish 34dbi) => download tra...