Community discussions

MUM Europe 2020

Search found 25 matches

by DragonSlayer
Wed Sep 14, 2016 12:05 pm
Forum: General
Topic: XBox One - Strict NAT - how to solve?
Replies: 4
Views: 1616

Re: XBox One - Strict NAT - how to solve?

Xbox One also use these ports:

TCP: 4838, 5050 (wol & streaming)
UDP and TCP: 49000-65000
by DragonSlayer
Wed Sep 14, 2016 11:51 am
Forum: General
Topic: Cannot find teredo IP address Xbox one
Replies: 5
Views: 1796

Re: Cannot find teredo IP address Xbox one

Xbox one has support for teredo..
http://support.xbox.com/en-us/xbox-on-w ... party-chat
this is the trouble shooter for the windows 10 computer
by DragonSlayer
Wed Mar 16, 2016 12:44 pm
Forum: Beginner Basics
Topic: How do i route?
Replies: 12
Views: 1627

Re: How do i route?

na.. did not help.. i guess i missed somthing more?

the pings did not change.. so i guess the mangle did not work?
by DragonSlayer
Tue Mar 15, 2016 5:08 pm
Forum: Beginner Basics
Topic: How do i route?
Replies: 12
Views: 1627

Re: How do i route?

it is bridged: i went to the bridge and klicked settings and marked firewall /ip firewall mangle add out-interface=eoip-tunnel1 protocol=tcp tcp-flags=syn action=change-mss new-mss=1438 chain=forward from the terminal.. but when looking in firewall mangle it was red so i had to change to ipsec-net b...
by DragonSlayer
Tue Mar 15, 2016 4:02 pm
Forum: Beginner Basics
Topic: How do i route?
Replies: 12
Views: 1627

Re: How do i route?

how can the tunnel affect internet traffic? i have tried dos ping to determine that the max mtu could be ping mozilla.org -f -l 1472 1472+28 = 1500 i guess i should change the MTU & L2 MTU on my 1.WAN interface (ether1) to 1500 ?? when pinging our RDP server inside the HQ net trough the tunnel i get...
by DragonSlayer
Tue Mar 15, 2016 3:05 pm
Forum: Beginner Basics
Topic: How do i route?
Replies: 12
Views: 1627

Re: How do i route?

i had to change in the route table creating a new list and then change the routing rules so that they only lookup in that specific list.. else i could not use mail from the wifi network.. A new problem appered: i cant surf to some webpages like: http://www.microsoft.com http://www.mozilla.org http:/...
by DragonSlayer
Wed Mar 09, 2016 10:58 am
Forum: Beginner Basics
Topic: How do i route?
Replies: 12
Views: 1627

Re: How do i route?

The wifi net should not reach resources on the lan, it should just have access to internet

is there a startup script that i can use to create the eoip interface, peers and policys so that i can use it on a dynamic local ip?
by DragonSlayer
Wed Mar 09, 2016 10:34 am
Forum: Beginner Basics
Topic: How do i route?
Replies: 12
Views: 1627

Re: How do i route?

that sounds very intressting, (clavister recently change their licensing mode to count SA's, intead of tunnels) Here are a full export from the RB751U-2HnD Legend: 1.1.1.1 HQ Clavister Public IKE IP 2.2.2.2 Mailsever DMZ public IP 3.3.3.3 Office local public IP 4.4.4.4 HQ in/out Public IP 192.168.0....
by DragonSlayer
Tue Mar 08, 2016 11:05 am
Forum: Beginner Basics
Topic: How do i route?
Replies: 12
Views: 1627

Re: How do i route?

Thanks for your reply.. it helped alot.. i had to make the mail ipsec policy level unique else it did not work add dst-address=2.2.2.2/32 level=unique proposal=default sa-dst-address=1.1.1.1 sa-src-address=3.3.3.3 \ src-address=192.168.88.0/24 tunnel=yes The reason for mail trough the tunnel is: we ...
by DragonSlayer
Mon Mar 07, 2016 5:43 pm
Forum: Beginner Basics
Topic: How do i route?
Replies: 12
Views: 1627

Re: How do i route?

the eoip-tunnel1 interface is member of a bridge called ipsec-net and also the eterport that is connected to the 192.168.88.0/24 lan
by DragonSlayer
Mon Mar 07, 2016 5:37 pm
Forum: Beginner Basics
Topic: How do i route?
Replies: 12
Views: 1627

How do i route?

i'am just guessing that i should route DSC_1725 (Small).jpg i have created an eoip tunnel to the 1.1.1.1 HQ firewall/router (clavister) and successfully and its working nice.. i also want the office microtik to use the tunnel to the 2.2.2.2 mailserver this is where all attempt fails /interface eoip ...
by DragonSlayer
Thu Mar 03, 2016 11:18 am
Forum: Beginner Basics
Topic: Clavister ike-LantoLan route problems?
Replies: 2
Views: 618

Re: Clavister ike-LantoLan route problems?

/ip firewall filter
add chain=forward comment="allow trafifc from HQ" dst-address=192.168.88.0/24 src-address=192.168.0.0/24
now i can reach the mikrotik subnet from den HQ subnet

todo: fix the mailroute
by DragonSlayer
Wed Mar 02, 2016 4:54 pm
Forum: Beginner Basics
Topic: Clavister ike-LantoLan route problems?
Replies: 2
Views: 618

Re: Clavister ike-LantoLan route problems?

the net on the other side of the tunnel is 192.168.0.0/24 but i also wanna route to our mailserver witch is in our dmz i wanna reache the mailserver trough the tunnel.. its already set up on the tunnel server (clavister) and works on the other offices clavisters.. but i wanna use an mikrotik instead...
by DragonSlayer
Mon Feb 29, 2016 4:12 pm
Forum: Beginner Basics
Topic: Clavister ike-LantoLan route problems?
Replies: 2
Views: 618

Clavister ike-LantoLan route problems?

I'm still a newbee! i however managed to make a tunnel to our Clavister main Firewall clavister-iketunnel-censored.JPG i dont know much about clavister! [admin@MikroTik88] > /export # feb/29/2016 14:31:38 by RouterOS 6.34.2 # software id = PLP3-P4UV # /interface bridge add admin-mac=00:0C:42:E1:B2:A...
by DragonSlayer
Fri Feb 12, 2016 12:28 pm
Forum: Beginner Basics
Topic: L2TP client office lan node with Wifi outside of VPN
Replies: 2
Views: 709

L2TP client office lan node with Wifi outside of VPN

i have configured a RB751U-2HnD as an router for an sub office it now connects to the head office with L2TP ether1 it used for WAN ether2 - 5 is office LAN now i wanna enable WLAN but wifi clients must not reach the LAN or L2TP.. internet only here is an edited export: [admin@MikroTik88] > export # ...
by DragonSlayer
Sat Jul 11, 2015 7:25 pm
Forum: Beginner Basics
Topic: wireless trouble with capsman
Replies: 1
Views: 830

Re: wireless trouble with capsman

it is upgraded to latest ROS and firmware
by DragonSlayer
Thu Jul 09, 2015 4:55 pm
Forum: Beginner Basics
Topic: wireless trouble with capsman
Replies: 1
Views: 830

wireless trouble with capsman

i have an RB2011UAS-2HnD as main router and capsman v2 master, and a hap-lite and cap2n as cap clients.. i have the capsman ap's in bridge with separate ip (else i got a loop message in log) dhcp server is assigned to the wifi-bridge and the networks shows in routes the nat rules works and i can se ...
by DragonSlayer
Thu Jul 09, 2015 4:22 pm
Forum: RouterBOARD hardware
Topic: SFP Support?
Replies: 2
Views: 910

Re: SFP Support?

well it took time before it was light in the other side.. but it does work now :)
by DragonSlayer
Tue Jan 27, 2015 3:24 pm
Forum: RouterBOARD hardware
Topic: SFP Support?
Replies: 2
Views: 910

SFP Support?

Does Mikrotik support single fiber SFP? Pro 10 Optix: GLC-BX-U-1315-20D-O
I have an RB2011UAS-2HnD

i just got fiber to my home and i'd like to skipp the client fibre node.. the supplied client node has this SFP
by DragonSlayer
Wed Nov 05, 2014 3:00 pm
Forum: General
Topic: v6.21.1 released
Replies: 112
Views: 28510

Re: v6.21.1 released

My RB2011UAS-2HnD is working normaly with the new ROS and FW
i upgraded from 6.21 and 3.18
by DragonSlayer
Mon Sep 30, 2013 11:39 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-2HnD Graphing
Replies: 9
Views: 2301

Re: RB2011UAS-2HnD Graphing

another solution is welcome :?
by DragonSlayer
Thu Sep 19, 2013 9:55 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-2HnD Graphing
Replies: 9
Views: 2301

Re: RB2011UAS-2HnD Graphing

SOLVED: This is what i did (im not an advanced RouterOs user) everyting was done via Winbox: Open Interfaces and go to the tab "Interface" Dubbleclick on your eth7 interface go to the tab "General" Select the value "None" for the "Master Port" setting Click OK Open Bridge and go to the tab "Ports" p...
by DragonSlayer
Sun Sep 15, 2013 12:40 am
Forum: RouterBOARD hardware
Topic: RB2011UAS-2HnD Graphing
Replies: 9
Views: 2301

Re: RB2011UAS-2HnD Graphing

Yest that is true.. port eth1-eth5 show everything on each port, while eth6 shows everything on eth6-eth10
by DragonSlayer
Thu Sep 12, 2013 9:41 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-2HnD Graphing
Replies: 9
Views: 2301

Re: RB2011UAS-2HnD Graphing

actually it has nothing to do with graphing. Just updated to 6.4 and rebooted (Graphing data stayed in place, was not deleted) eth6 records data even if i dont have anything connected to that slot i guess it has something to do with the switch, only recording on the master port. so how can i get rec...
by DragonSlayer
Thu Sep 12, 2013 11:59 am
Forum: RouterBOARD hardware
Topic: RB2011UAS-2HnD Graphing
Replies: 9
Views: 2301

RB2011UAS-2HnD Graphing

I don't get any graphs on eth7-eth10 ports RouterOS 6.3 Firmware 3.08 /interface print Flags: D - dynamic, X - disabled, R - running, S - slave # NAME TYPE MTU L2MTU MAX-L2MTU MAC-ADDRESS 0 RS FE6-HomePlug ether 1500 1598 2028 D4:CA:6D:97:8C:F2 1 RS FE7-U5 ether 1500 1598 2028 D4:CA:6D:97:8C:F3 2 S ...