Community discussions

MikroTik App

Search found 36 matches

by Raumaster
Sun Mar 01, 2020 8:50 pm
Forum: General
Topic: Automatic MTU/MRU for the PPPoE Client
Replies: 12
Views: 15157

Re: Automatic MTU/MRU for the PPPoE Client

So, you are saying my Ubiquiti ONUs is not respecting an RFC? Because if my pppoe server is set to 1492/1492 (MTU and MRU) all my ONUs automatically sets everything to 1492, MTU and MRU withou the need to set it manually in each CPE! The UBNT OLT L2 MTU is set to 1518 bytes which corresponds to the ...
by Raumaster
Tue Feb 25, 2020 7:48 pm
Forum: General
Topic: Automatic MTU/MRU for the PPPoE Client
Replies: 12
Views: 15157

Re: Automatic MTU/MRU for the PPPoE Client

The fact is, my Ubiquiti ONUs internal pppoe client set its MTU automatically to what is set on the PPPOE server side both for MTU and MRU and this doesn't happen with the Mikrotik RouterOS pppoe client! I myself think the client should obey what is set on the server side, simple as that! Or there s...
by Raumaster
Fri Jan 24, 2020 12:25 am
Forum: General
Topic: Automatic MTU/MRU for the PPPoE Client
Replies: 12
Views: 15157

Re: Automatic MTU/MRU for the PPPoE Client

Hi! Guys, I understand all your points, but I think no one got my point! I as a network administrator know what my network is capable of or at least I should know that, right? I know what all my equipment can handle and I I know they can handle 1492 for the MTU and MRU, why should I set it manually ...
by Raumaster
Tue Dec 31, 2019 5:23 am
Forum: General
Topic: Automatic MTU/MRU for the PPPoE Client
Replies: 12
Views: 15157

Re: Automatic MTU/MRU for the PPPoE Client

Anumrak, If I set the pppoe server side to 1492 (MRU and MTU) and set the clients to 1492 as well, there is no packet fragmentation. CZfan, Then why the Ubiquiti ONUs follow the Mikrotik pppoe server side for MTU and MRU without having to set anything on them? I assume the default mtu of the ubquiti...
by Raumaster
Sun Dec 29, 2019 1:09 am
Forum: General
Topic: Automatic MTU/MRU for the PPPoE Client
Replies: 12
Views: 15157

Re: Automatic MTU/MRU for the PPPoE Client

Anyone??

I still can't make my SXT clients follow the server MTU automatically. All my Ubiquiti ONUs automatically change the MRU and MTU following the PPPOE server settings. Why can't routerOS do the same on the routerboards clients, SXTs...?
by Raumaster
Mon Mar 18, 2019 5:01 am
Forum: General
Topic: Switch with low performance!
Replies: 21
Views: 8974

Re: Switch with low performance!

I solved my CRS 326 RX Overflow problem switching the uplink port that was on an ethernet port to an SFP port. If this helps, it sounds to me as if the connection on the copper-only port negotiated a half duplex operation mode, as otherwise there is no sane reason why an SFP should perform differen...
by Raumaster
Wed Mar 06, 2019 7:42 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96534

Re: v6.44 [stable] is released!

We use superchannel.
The country setting now has priority, so your superchannel won't work unless you have country set to no_country_set. The forum is full of discussions about this change...
All our APs are set to "no_country_set" since forever.
by Raumaster
Sun Mar 03, 2019 11:09 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96534

Re: v6.44 [stable] is released!

In my network things were running smoothly without complaints from clients, the day after going from 6.42.3 to 6.44 we starded receiving many complaints about slow internet speed. In two sectors we have two clients with signal going from -68 to -72 and these clients were using the Internet without ...
by Raumaster
Sun Mar 03, 2019 10:57 pm
Forum: General
Topic: Automatic MTU/MRU for the PPPoE Client
Replies: 12
Views: 15157

Automatic MTU/MRU for the PPPoE Client

Hi! When I change the PPPoE MTU on the server side to let's say 1492, it only changes the MRU to 1492 on the server side and the MTU keeps set to 1480. In this case, a SXT Lite 5 is the CPE and even though the pppoe client is se to default in the CPE it only changes the MRU. We now have 155 SXTs dep...
by Raumaster
Sat Mar 02, 2019 3:24 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96534

Re: v6.44 [stable] is released!

In my network things were running smoothly without complaints from clients, the day after going from 6.42.3 to 6.44 we starded receiving many complaints about slow internet speed. In two sectors we have two clients with signal going from -68 to -72 and these clients were using the Internet without a...
by Raumaster
Sat Mar 02, 2019 3:29 am
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96534

Re: v6.44 [stable] is released!

well, the context was in the sense of mixing "mipsbe" (and "mipsle") devices with "arm" equipped processors where several people seems to have problems with. Apart from that you are right, in NV2 only mikrotik gear works. But in 802.11 you can also use any other 802.11...
by Raumaster
Fri Mar 01, 2019 12:49 am
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96534

Re: v6.44 [stable] is released!

"NV2 in this release has been improved for mixed networks." Please, explain the definition of "mixed networks". As far as I know I can only use NV2 with mikrotik gear. And what happend to what Mikrotik stated a few month ago when they've released version 6.42.3 saying that now on...
by Raumaster
Thu Feb 28, 2019 6:46 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96534

Re: v6.44 [stable] is released!

I've updated all my routerbords including all the APs, SXT SA and RB921GS from 6.42.3 to 6.44 and had problems with clients with kinda low signal, -68, -70, -72dbm... In the versio 6.42.3 Mikrotik had made improvements on the NV2 Protocol and said then that clients with low signals from that version...
by Raumaster
Sat Dec 15, 2018 3:42 am
Forum: SwOS
Topic: Overruns on CSS326-24G-2S+RM
Replies: 51
Views: 30606

Re: Overruns on CSS326-24G-2S+RM

Using the SFP instead of an ethernet port for the uplink, solved my overrun (overflow on RouterOS) problem.
by Raumaster
Thu Dec 13, 2018 10:42 pm
Forum: General
Topic: Switch with low performance!
Replies: 21
Views: 8974

Re: Switch with low performance!

I solved my CRS 326 RX Overflow problem switching the uplink port that was on an ethernet port to an SFP port. It seems the SFP port can handle all the traffic better then one ethernet port receiveing and transmiting data from and to other ethernet ports.
by Raumaster
Fri Aug 24, 2018 6:51 am
Forum: Announcements
Topic: v6.42.7 [current] is released!
Replies: 159
Views: 69846

Re: v6.42.7 [current] is released!

Dhcp error still persists as offering lease withour success on CCR1009. After many errors the dhcp stops to answer for a while. In our network we have one RB 3011 that works as a Load Balance and in this routerboard we have one DHCP server on one interface and it stoped working as well after applyi...
by Raumaster
Mon Aug 06, 2018 3:25 am
Forum: Wireless Networking
Topic: nstreme protocol security
Replies: 3
Views: 1773

Re: nstreme protocol security

WPA2-AES.
by Raumaster
Tue Jul 10, 2018 12:22 am
Forum: Wireless Networking
Topic: AP cant use its maximum tx power to transmit higher data rates, why?
Replies: 4
Views: 1358

Re: AP cant use its maximum tx power to transmit higher data rates, why?

The higher the power output is = the higher the noise level will be and that's why the radio can't transmit more bits without causing lots of transmission errors.
by Raumaster
Thu Jun 14, 2018 8:20 pm
Forum: Wireless Networking
Topic: Wireless Data Rates - Optimizing AP
Replies: 22
Views: 18291

Re: Wireless Data Rates - Optimizing AP

In your scenario, 24Mbps / 5 = Shared bandwidth. in Wireless (802.11, NV2, Nstream, AIRMAX...) the AP is always sharing bandwidth. The actual AP data rate is the amount of available bandwitdh for everyone connected to it, simple as that! Remember that we're talking about air rate, the wi-fi protocol...
by Raumaster
Thu Jun 14, 2018 7:48 pm
Forum: Wireless Networking
Topic: Wireless Data Rates - Optimizing AP
Replies: 22
Views: 18291

Re: Wireless Data Rates - Optimizing AP

If you limit the AP to lets say, MCS 1 which gives you 13Mbps @ 20MHz, this is the air rate you are going to be sharing with eveyone! 13Mbps for x amount of clients you have on the AP. Leave it at auto if you don't know what you're doing or limit it to the MCS rate which gives you the best overall C...
by Raumaster
Wed Jun 06, 2018 9:37 pm
Forum: SwOS
Topic: Overruns on CSS326-24G-2S+RM
Replies: 51
Views: 30606

Re: Overruns on CSS326-24G-2S+RM

Nobody?
by Raumaster
Mon Jun 04, 2018 10:11 pm
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 114812

Re: Significant improvement for wireless Nv2 PtMP

Yes, I can confirm jitter seems to be lower in version 6.42.3.
by Raumaster
Wed May 23, 2018 3:35 pm
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 114812

Re: Significant improvement for wireless Nv2 PtMP

I've been testing 6.42.1 for a while now in all of my Sectors with Basebox 5 and SXT SA5, all clients are SXT lite5 and sq and the results are a bit better then before when throughput is the only thing in mind, but ping times are not good and jitter seems to be even worse then before ping times go a...
by Raumaster
Wed May 23, 2018 5:11 am
Forum: Wireless Networking
Topic: Nv2-downlink-ratio - new huge bandwidth increase setting
Replies: 67
Views: 29942

Re: Nv2-downlink-ratio - new huge bandwidth increase setting

But to come back on the topic; "Nv2-downlin-ratio - new huge bandwidth increase" .... I think there are serious problems indeed. We saw several vent these here on the forum but so far ample comments from MT's end..... I apologize you guys. I was refering to the topic with the new NV2 Impr...
by Raumaster
Tue May 22, 2018 2:47 pm
Forum: SwOS
Topic: RX Overruns
Replies: 3
Views: 4764

Re: RX Overruns

I've read here in the forum two "solutions", firmware update and to activate flow control, but none helped me with this problem. :(
by Raumaster
Tue May 22, 2018 2:33 pm
Forum: SwOS
Topic: Overruns on CSS326-24G-2S+RM
Replies: 51
Views: 30606

Re: Overruns on CSS326-24G-2S+RM

Did you guys find a solution for the RX Overruns? I'm having exact the same problem. Firmware version 2.7...
by Raumaster
Sat May 19, 2018 5:11 pm
Forum: Wireless Networking
Topic: Nv2-downlink-ratio - new huge bandwidth increase setting
Replies: 67
Views: 29942

Re: Nv2-downlink-ratio - new huge bandwidth increase setting

I wonder why this topic is not pinned above the others anymore? Are the improvements not really improvements or is there some kind of serious problem to be corrected in this version? EDIT: Sorry, wrong topic! I was talking about the topic with the NV2 Improvements made in version 6.42.1. Where is it...
by Raumaster
Wed May 16, 2018 12:54 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 222302

Re: v6.43rc [release candidate] is released!

*) wireless - improved Nv2 PtMP performance;
is it further improvement from 6.42.1?
I'd like to know what kind of NV2 performance improvement we can expect from version 6.43? I did notice improvements in version 6.42 but heard of people saying the new 6.43rc is worse then 6.42...
by Raumaster
Sun May 13, 2018 10:04 pm
Forum: Wireless Networking
Topic: NV2 protocol big disappointment
Replies: 24
Views: 7839

Re: NV2 protocol big disappointment

NV2 Performance drop beyond 15 to 16 clients is supposed to be corrected in the latest RouterOS version, 6.42 on... in version 6.43rc5 and later RCs, there are more improvements.
by Raumaster
Sun Mar 12, 2017 11:21 pm
Forum: Wireless Networking
Topic: Client Background wireless scan
Replies: 24
Views: 16913

Re: Client Background wireless scan

Why has this feature not been implemented for NV2 clients?
by Raumaster
Tue Feb 05, 2013 4:41 pm
Forum: General
Topic: PCC - Src-Address method.
Replies: 2
Views: 3174

Re: PCC - Src-Address method.

I began using both addresses with firewall rules for the banking websites and everything seemed to be fine, but I wasn't satisfied with the web browsing speed, then I gave "both-addresses and ports" a try and I'm amazed how things became faster and is near 50:50 ratio, things are much more...
by Raumaster
Sun Jan 27, 2013 11:42 pm
Forum: General
Topic: PCC - Src-Address method.
Replies: 2
Views: 3174

PCC - Src-Address method.

I'm about to create my first PCC Load balance and I don't want to have problems regarding https sites, videos streaming and so on and since I've heard that using both-address or both-address and ports as classifiers may disturb some https sites and streaming, I've read few texts on PCC LoadBalance a...
by Raumaster
Wed Dec 05, 2012 4:35 am
Forum: General
Topic: Load Balancing over Multiple Gateways
Replies: 5
Views: 2987

Re: Load Balancing over Multiple Gateways

Sorry for taking so long to post a reply with the information you asked for. I had a few problems that took all my time and willing to solve this problem, but I'm back again posting what you had asked me. I still want to solve this little problem. Thanks for spending your time with me. /ip address p...
by Raumaster
Mon Oct 01, 2012 7:39 pm
Forum: General
Topic: Load Balancing over Multiple Gateways
Replies: 5
Views: 2987

Re: Load Balancing over Multiple Gateways

Thanks for the reply! If I do this, all the clients connected to that IP range cannot access the Internet, all data stops being sent to the Modem # 2 - The Second ISP. My need and configuration is as follow: - ADSL Modem - ISP #1 - ADSL Modem - ISP # 2 - LAN Clients - on Eth # 3 - Wireless Cliets # ...
by Raumaster
Fri Sep 28, 2012 2:48 am
Forum: General
Topic: Load Balancing over Multiple Gateways
Replies: 5
Views: 2987

Load Balancing over Multiple Gateways

Hi! I've been searching for something like this a while ago: http://wiki.mikrotik.com/wiki/Load_Balancing_over_Multiple_Gateways ...and it works fine, the way I wanted it to, but one thing happens when I do this, I lose access to the web configuration interface of all my devices, modems and wireless...
by Raumaster
Fri Sep 28, 2012 2:44 am
Forum: General
Topic: Load Balancing over Multiple Gateways Wiki Tutorial.
Replies: 0
Views: 663

Load Balancing over Multiple Gateways Wiki Tutorial.

Hi! I've been searching for something like this a while ago: http://wiki.mikrotik.com/wiki/Load_Balancing_over_Multiple_Gateways ...and it works fine, the way I wanted it to, but one thing happens when I do this, I lose access to the web configuration interface of all my devices, modems and wireless...