MikroTik

turalo

Hi guys. I'm searching for a solution for sometime now, but still unable to find one, I hope to find it here. My situation: 1. microtik cloud core router, wich I'm using as switch now. on this mikrotik I have multiple servers. 3 multicast streaming servers and 2 database servers. my problem is, when...

turalo

Try that: http://wiki.mikrotik.com/wiki/Hairpin_NAT

Yes, this is it. thanks for you fast help.

turalo

Hi guys. I have a little problem with my mikrotik, I have a server with some services on it, this server is on a local natted 192 IP, the services from that server are reachable from outside nat (public internet) fine, I have forwarded the ports, and all works fine. but when I go to the domain name ...

turalo

Hi guys, I need a little help here, I have a connection that I want to pass true transparently without changing ip's etc... But I want to be able to limit the speed for this connection. so I have used 2 interfaces to do this. on my router interface 2 and 3. I have plugged a cable from my Internet ro...

turalo

Hi guys, I'm back again :) now the routed subnet problem is solved, I can succesfully comunicate in and out on my pc. I have connected also second device on port 9eth of the router and have bridged it with port 10. now they both have public IP 50 and 51, and all works fine. thanks allot for you help...

turalo

I dont have any firewall / nat / filter or rule. the only thing I did ont his device is configutre time / date user pass, updated firmware and os. then I set the IP for 1st interface eth1, and to the 10th interface for ths routed subnet. then I have added a default rule 0.0.0.0/0 to eth1 / xx.xxx.1...

turalo

I dont have any firewall / nat / filter or rule. the only thing I did ont his device is configutre time / date user pass, updated firmware and os. then I set the IP for 1st interface eth1, and to the 10th interface for ths routed subnet. then I have added a default rule 0.0.0.0/0 to eth1 / xx.xxx.1...

turalo

It sounds like the ISP might have made a mistake in routing your /28 to you. I assume that /ip firewall NAT and /ip firewall FILTER are both empty right now, since they didn't appear in your /ip export. If you have rules, make sure they're not blocking anything, doing NAT, or some other effect that...

turalo

pasting an /ip export will help also... [admin@MikroTik] /ip> export # may/11/2015 23:16:07 by RouterOS 6.28 # software id = xxxxx-xxxxx # /ip address add address=192.168.88.1/24 comment=local-port-no-dhcp interface=ether12 \ network=192.168.88.0 add address=xx.xxx.102.38/24 comment=port1-public in...

turalo

Hi guys. I have this situation here : Mikrotik cloud core router ccr-1016 on interface 1 I have the public IP adress : x.x.102.38 gateway : x.x.102.1 From the terminal of the router I can ping to public internet, google etc... all OK. then on interface 10 I have set a Routed Subnet of : IP : x.x.101...

turalo

I'm very sorry if I offended anybody, or made a rude move. it's not my intention, I'm just little irritated by this little device that keeps me trying for 2 days now. somehow it's always same with mikrotik, they are good, but untill I get a grip on them, they will completely distroy me. I understan...

turalo

Being rude won't convince me to help. that said.. Nowhere in your original post do you say that you have a /28 subnet. If you are able to post screen shots from your pfSense from the NAT, gateways and routes screens, we can translate to it a mikrotik config. I'm very sorry if I offended anybody, or...

turalo

Also posting a diagram helps.

Hereby a diagram, i drow it fast, hopefully with no mistakes.

mikrotik-diag.jpg

turalo

1. I have a subnet, if you pay attention you will see /28, that's the subnet that I got from my provider. net x.x.x.48 the gateway for the router is x.x.x.1, I know this must be possible. 2. this job is now done by my PFSENSE, but somehow it's not working on mikrotik, 3. If i want a NAT i will just ...

turalo

Is this so complicated that nobody has a glue? or did I do something so stupid that it's to funny to help out ?

turalo

After reset problem is solved.

thanks anyway.

turalo

Hi guys, I'v got this new cloud core router 1016, just opened the box, connected by a pc to it on 192.168.88.1. configured the external interface to a public IP, I have a good connection. but this external connection is lost every 5-10 minutes, for about 5-10 seconds. I have 2 pings runing, one from...

turalo

Hi guys. I have got a new cloud router : mikrotic ccr 1016. I'm trying to set it but I'm unable to make all work. this is the situation : I have IP range : 88.123.123.48 - 88.123.123.63 gateway : 88.123.123.1 I have set, port 1 to : 88.123.123.49, and gate to : 88.123.123.1 I have set a route : 0.0....

turalo

Yes, this one works perfect.

now the fysical loop does not affect the router anymore. thanks allot.

turalo

With this config, you will get a loop. RSTP will not work. As to why: Every port must the in the "/interface bridge port". You are using the "master-port" function which is different. Take a look at the diagrams in this wiki article: http://wiki.mikrotik.com/wiki/Manual:Switch_C...

turalo

you are totally right, both ends of a cable shouldn't be connected to the router :) the point is to make this router usable by everyone, not only the IT guy with 30 years of experience :) I have worked for many companies, one of them was the KPN, this is the main Telecom / Internet company in the Ne...

turalo

I also checked the logs, the only thing I can see in the log that the 2 ports are connected by 100full, after that there is nothing

it's like a silent killer

))

turalo

[admin@MikroTik] > /interface export compact # dec/24/2012 13:23:47 by RouterOS 5.22 # software id = 87E9-XAIM # /interface bridge add admin-mac=D4:CA:6D:52:48:6D auto-mac=no l2mtu=1598 name=bridge-local protocol-mode=rstp /interface wireless set 0 band=2ghz-b/g/n channel-width=20/40mhz-ht-above dis...

turalo

No, after I disconnect the network, it stays that way, to be able to use it I have to power it off, then and only then it works again. the config is default config, imagine the config after hard reset, the only thing I change is disable wifi, and enable dhcp. nothing alse.

turalo

When I say crashed I mean that the router is not accessible anymore, forget the INTERNET, I'm unable to even login to the router, so I have to restart the router by power off, then it works only if I take out all cables and connect to it by wifi or a single lan cable from my laptop. or other sinble ...

turalo

The router stays on, lights are on too so
Its not power issiu...

turalo

What I checked was if it's enabled on the bridge interface, and it was on rstp, then I changed it to stp but no effect, as soon as I connect 1 cable's both ends on the router, port 3-4 then the router crashes. so on both stp or rstp same result. I use it in a default config, so all ports are bridged...

turalo

Hi guys, I'm using RB751u-2hnd, sometimes at customers locations when I connect this and try to connect the network to it, it crashes, and nothing works. I have checked and so far I cannot find any loops or anything, is there a way to see what crashed the router ? some kind usb or serial cable ? so ...

turalo

Hi guys, I have a problem with loops, some of my customers where I have mikrotik, make mistakes sometimes they put both ends of a utp lan cable in same router :) so in this case whole network goes down. Any suggestion how to solve this ? I understood that the STP protocol could do this, but there is...

turalo

I would like to make one important note, the problem of wireless is not just everywhere and every time. In my case in office it works perfect, with all pc's, mobiles, ipads etc... all perfect. But at home, and on many other location it does not, I use same config as in office in other locations, als...

turalo

The problem with mikrotik is simple, they have opened the box of pandora and dont understand that not everyone is able to set everything right even with 10 years of experiance in this sector. With many diplomas and certificates of like ccna mcsa etc... So there are so many options open, which are ju...

turalo

No it was not clear that the unit was working elsewhere. The setup may not be working but so far there isn't any evidence that the Mikrotik unit has "failed". If there is a traffic storm it would be evident if you monitor the interfaces. The shortest path to an answer is to examine the in...

turalo

Well either you have a hardware issue, a physical connection issue or a config issue. The easiest one to check remotely is the config which is why I suggested that you upload it. That along with a note of which ports are connected to what would let us comment. You dont understand, maybe I wrote it ...

turalo

You have not given us any idea of what configuration you have on the Routerboard so it is hard to comment! RouterOS supports stp on its own bridges but if you are using the hardware switch on the chip I think it does not. If you can upload the output from /export compact we can comment on the confi...

turalo

Hi guys, today I experienced a very bad part of mikrotik router, I was trying to replace a router by mikrotik, sothat I can manage the network better, so the situation is simple : 1 internetcafe with 9 pc's on one side 8 pc's for customers us 1 pc as a server station with CyberCafe Pro on it. basicl...

turalo

Easy for you to say... I'll change the passeord first, and will make a new file.
I had bad experiance with kolmisoft, our password were misused by one
Of their workers, then i lost almost 1000 eu.

turalo

what wireless data-rates it is using when you are doing the test? Make support output file and send that to support@mikrotik.com I just made the supout file, I opened it with notepad++ it's coded, I need to know what info is there ? if my passwords are there too, then I would not want it to be seen...

turalo

Same here, have few of them, Somehow the one in the office works for the most of times, but at home, and few at customers site have the same wifi problems, good fast connection but very poor quality, most of times no response, you request a website and wait, and wait, and wait then you understand th...

turalo

Well it's partially in bridge, so we have 4 lan ports, 3 of them are in bridge, port 1, 3, 4 they work toghether, while port 2 is enslaved and has the separate 192.168.2.1 ip and DHCP. now you asked me about ping, I just tried the ping and it worked, after that I tried to acces the devices and I can...

turalo

This is my routing table : /ip route> print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 xxx.xxx.xxx.xxx 1 1 ADC 192.168.1.0/24 192.168....

turalo

I didnot add any drop rule, and I'm unable to go from one to another...

turalo

Ok, an update on this, I made the changes just now, on my production router, and all works well, as described and planned above. it seems that it needs time to work, I expected it to work directly, but I guess it needed 3-5 minutes to start giving DHCP IP addresses etc... But now as planned I have s...

turalo

I have searched the forum but could not find the info, so any help advice is appreciated. I have created 2 networks on my router, 1 : 192.168.1.1 on lan ports 1-3-4 No DHCP 2 : 192.168.2.1 on port 3 (lan port 2) with DHCP the 192.168.1.1 is for pc's and 192.168.2.1 for voip phones only. all works fi...

turalo

I checked, if I open it with notepad++ I can see the credentials of ppp users etc... so they are in the file
I also checked for NTP info, is also in the file.
I was not able to find any info on router password, I dont know if it should be in the file ? but it was not there.

turalo

Yes, true, this one is the router config that I use now, this one is not yet configured in the way I want it to, I was testing the config on other router and it didnot work in first test. because you said to take off from bridge is not alwaysa same, that's why I showed my config, sothat you can see ...

turalo

Used export and import commands to backup and restore today, after restore most settings were ok, but this :

PPPTP / users / pass

routers password

ntp settings

were lost.

but this way of restore is better, cause otherwise all is mixed up

this is just for the info.

turalo

Ok, now I have made a copy of the config, I'll put it in a text file as attachment, funny thing is, this time I used to copy my config from my production router by the export command and imported it in the test router by import and although some settings were lost, such as password for acces, ppp us...

turalo

Bridge and the switch chip/master port are two completely separate things. The bridge uses software to make a layer2 interface, and a switch chip uses hardware to make a layer2 interface. So depending on what steps you took and setup and current configuration, setting master port to none may or may...

turalo

the first point : 1 - Remove ether3 from the bridge

that's done by setting the master port to none ? right ? or is there another way ?

turalo

thanks for the info.

just tried, I see that the file difference is 30 kb.

the one which is made by using backup button is 51.xx kb
the one which is made by export command is 21.xx kb

turalo

HI, I have been testing mikrotik routers for last few days, to find out how to solve the problems in my situation. Today I made a backup in my active production mikrotik, and made a copy of it to my pc. on this router everything is set fine, and works well, all interfaces are active, wlan works good...

turalo

this forum can be a pain in the ass sometimes...

as soon as I ask something serious or difficult, no reactions.

turalo

The ether3 I want to give : 192.168.2.1 (gateway ) and DHCP range: 192.168.2.2 - 192.168.2.254 by default is dhcp disabled on this router, because of the dhcp on my win server, so that's why I want to separate this port, enslave it, and run a dhcp on it. I dont really care about the separated IP adr...

turalo

Hi guys, since I started with mikrotik which was few weeks ago, I learned much, after reading and watching hours of Mikrotik webinars and tutorials. But somehow I'm unable to set my network the way I want it, theoretically it must work, but it does not. So I'll try to make it as simple as possible a...

turalo

After watching Nuts & Bolts video I now understand the real power of MIKROTIK.

anybody who wants to see what this routerboards can do, must see this video.

turalo

this one is new :

10 mikrotik Video tutorials (webinars)

http://www.gatola.com/category/mikrotik/

turalo

I have just finished watching this one, many of my questions are answered here, so i thought I'll share it :

http://www.gatola.com/2012/11/09/traffi ... -tutorial/

turalo

found this source today :

http://www.gatola.com/category/mikrotik/

turalo

I found this source today, is a must see for Mikrotik starters.

http://www.gatola.com/category/mikrotik/

turalo

I just tried what you said ( I hope I did it the way you meant it) but no effect at all, still same, here is the code : /queue simple add burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s direction=both disabled=no interface=all limit-at=0/0 max-limit=6M/22M name=\ Parent-of-default packet-marks=...

turalo

now after following a video tutorial and also changing some settings on the arp section of the bridge, I'm able to see all devices connected by fisical ports, but wifi devices are not showing, I tried the arp option but that does not help, anybody knows why the dude does not show wifi devices by dis...

turalo

I found out what the problem was, I had to change the settings of the bridge interface, where it says ARP : enabled, I changed this to ARP : proxy-arp after that it started working fine.

thanks.

turalo

just double checked all, there is no other firewall, and all devices are pingable...

I have used the dude before, in our office and it worked well, but here on this location it does not.

what can I check more? to make sore it works ?

turalo

Hi, I just downloaded the dude 3.6, installed and started discovery, I turned win firewall off, I have few devices on my network that are online now, but the dude is unable to discover anything, anything at all.

any advice / help

much appreciated.

turalo

Hi guys, I have created a Queue many times, using different ways, now the problem is that the prioritized IP is not getting the priority and not holding the given speeds. Now My question and request for you guys is to check my config and tell me if I'm doing it right. I'm trying to achive 2 things, ...

turalo

O yes

o Yes. after trying so much diferent things, you helped in a minute

I enabled the proxy arp on the bridge interface and the problem solved. it works.

thanks a lot.

turalo

Hi guys, I'm trying to connect tou our office thru vpn connection, I have set the pptp server to enabled, then I have added secret (user pass) and set manuly free Ip adresses to the local and remote field, I'm able to connect remotely, I get Ip adress etc.. but I'm unable to reach any host on the ne...

turalo

in some cases yes you must forward, in my case I didnot need to, cause my PBX (piaf) is doing all natting in a way that it even works true 2-3 routers :) which is not the best setup obviously, but in test scenarios it came good out the test, even behind 2 routers it works fine, but if it does not wo...

turalo

1 not only wifi, yes you can 2 dont know :) I think yes 3 I have same situation with frits behind it and voip on frits works even without any config ( if used with aseterisk or some kind PBX with natting) 4 here an example of port forwarding : /ip firewall nat add action=dst-nat chain=dstnat disable...

turalo

I have DHCP's 1 for every lan port, and is 192.168.2,3,4,5.0/24 that one you can also see on the image, and also you can see that the old dhcp with 192.168.88.1 for wlan is red/turned off. so I dont have anything with such IP, but most important on the image you can see the ARP, all active IP's you ...

turalo

No, that's not the case, If you check the right side of the image I posted you will see the ARP table of connectred IP's, also you can see adresses windows there you will see IP networks that are active. so the IP's in the table are really not existing IP's .

turalo

Hi, I have strange IP adresses showing on my router, from IP's that do not exist, anybody any idea what it could be ?

turalo

Yes, first time when I did that there were some errors, I guess I did something wrong, now I'm trying same config, this time I indeed assigned IP adresses to each port, its little confusing for me as I'm a starter in the Mikrotik logics :) but for now I set for each port a different network, like 19...

turalo

I even tried to limit torrent it self like this : [admin@MikroTik] /queue simple> print Flags: X - disabled, I - invalid, D - dynamic 0 name="Kartinatv" target-addresses="" interface=ether3-slave-local parent=none packet-marks="" direction=both priority=1 queue=default-...

turalo

Hi guys, I have this problem whyle setting my mikrotik router, what I wanted to do is simply preserver and prioritize my IPTV based on the Port(interface) my interfaces are separated and not slave (set to 'none') each has its own dhcp, everything works well, but when I set the priority nothing happe...

turalo

That's the problem part, in my case DHCP on the router is disabled, dhcp is done by windows 2008 server.

turalo

Yes, but I cannot use IP for the case that IP address changes by dhcp some time, and now that means If I go this way I will not be able to specifically set the upload speed. but only the download speed.

turalo

Update : I've found out that in any case if I change the speed it changes on both the upload and the download, so does not matter in which column I change it, upload or download, it affects both upload and download. what is wrong with this ? hereby my printout : /ip firewall mangle> print Flags: X -...

turalo

wow :) fast and precise. thanks for help. one question I have left on this one, why is the upload now download and vise versa ? in que now if I set limit for upload 2 mb, and for download 20mb, it sees it as download 2 mb and upload 20 :) first I thought I set it wrong but then I when I changed the ...

turalo

Hi, I need little advice about mangle / marking and queue I have configured a marking based on a MAC address, in the mangle part, then I have enabled it and checked the statistics, it's active and counting well, then I have added a new rule in simple queue and wanted to select the mark from the mang...

turalo

The first solution stopped working after a week, somehow it stopped givin IP adresses, and even on static I was not able to connect on that port anymore, untill I restarted, and then it went to slave again, all by it self, I did not change anything. today wholoe day I was trying to make the same con...

turalo

ok, I'v got some news :) I have gained acces to the web server via single user :) made myself second root and found the config file of the website, there I have changed the IP to the local IP, now on my local network everything works perfect, we use this server actually for 95% local in our office, ...

turalo

If I disable the nat rule, if I request the website with a local IP, I get the main page 100% good, but as soon as I use the menu's ( which are configured with external IP) then I get nothing at all. if I enable the nat rule then I do not get the home page 100% only in text mode, and if I use menu l...

turalo

thanks for helping out , here is my config : [admin@mikrotik] /ip firewall nat> print Flags: X - disabled, I - invalid, D - dynamic 0 ;;; default configuration chain=srcnat action=masquerade out-interface=ether1-gateway 1 chain=dstnat action=dst-nat to-addresses=192.168.1.45 to-ports=80 protocol=tcp...

turalo

NO, this one defently does not work, the first home page is loading well, but any sub menu is not loading at all.

please any advice is appreciated.

thanks in advance.

turalo

Does not matter if I put external or internal IP, it's opening but only in text mode, so no styles nothing is loaded, it's just a blank page with links from menu (blue colored) and no images etc... images are X like blocked. when I put the internal IP of the server, it changes it in the procces to e...

turalo

I think you are not defining the network of your WAN interface correctly. I see in the picture attached /ip address print address=x.x.225.137 network=x.x.225.137 interface=ether1-gateway There should be the subnet specified as well, something like: /ip address add address=x.x.225.137/24 interface=e...

turalo

ok, this one is better but not 100% :) after adding this code, now when I go to the local IP of the www : 192.168.1.45 it directly shows that my external IP in the adress field and status bar, and after a while it load the text only page with links, so no full page is loaded, and yes you are right I...

turalo

I think I have done that too, but it did not work, now I have access but I cannot try, cause if it goes down my mail server will be unavailable, tomorrow I'll try it from the office... thanks for now.

turalo

I have tried it , but it didnot help :( this is the code I'v used : /ip firewall nat add chain=srcnat src-address=192.168.1.0/24 \ dst-address=192.168.1.45 protocol=tcp dst-port=80 \ out-interface=ether2-master-local action=masquerade the : 192.168.1.45 is my www server, the main lan interface is et...

turalo

Yesterday my setup stopped functioning, my devices on the separated port were not able to get any ip or dns, for a week it was alright, i didnot change anything, it just stopped working

turalo

anybody any idea ?

turalo

Any chance you help me again :) Now last time when you told me how to change the port from slave to normal I did it at home, at home it was ok, at home I'm using DCHP enabled config for both IPS and local Net. now I have installed same router in our office, now the problem is I cannot change the por...

turalo

You can do this also on interface, I'v done it with my rb, what you need to do is select the interface and turn off the slave option, so in the interface settings where you see "Master port : " if you set this to none, then this interface will separate the trafic, so you can add a dhcp if ...

turalo

This one is verry funny, I have tried 5 different mikrotiks, all have the same problem, I dont get this, I had one other mikrotik a week ago, that one worked fine, but that one is gone now, so I have only left new in box and all of this new ones giving me same problem, as soon as I set gateway in th...

turalo

Yes :) the guy who set that, he set it somehow wrongly, but he's not available for comming few weeks so I have to solve it somehow temporary. here you can see the links copy, I clicked right mouse on one of the menu's and copied the link location : http://xx.xx.x25.137/en.menu_5_1_1.html it makes no...

turalo

Hi guys, I have this problem on my Mikrotik, I have set a STATIC IP from my ISP, DNS and Gateway, but it didnot work, so I went to routes and I see there 3 entries : [admin@MikroTik] /ip route> print detail Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ...

turalo

Hi guys, I need a little advice urgently, I have a web-server on my local network, now to make it accessible from outside I added this to the router : /ip firewall nat add action=dst-nat chain=dstnat disabled=no dst-port=80 in-interface=ether1-gateway protocol=tcp to-addresses=192.168.1.45 \ to-port...

turalo

I did, but somehow I dont see any activity on the statistics and also I dont see any change on my wifi device, so from the start I could get 8.42mbps, and after adding this que and even putting limit of 2mb or 1mb it's not limiting it. so it's like it does not see the wifi interface, while it's prop...

turalo

What if I want to do the same on the wifi ? cause the settings are not same

please advice if possible.

turalo

Soo, this one works :) you helped me with your step by step advise, thanks I have separated the interface, then I created IP adressing and a DHCP ser for that interface, and now I can make a simple queue and it works, now I have one more questions about the queue priority, by default it's set to 8, ...

turalo

Is there a way to change this setup sothat I can do it by interface ? or is this a kind of factory setup ? and is unchangable ?

turalo

Funny thing is, somehow it shows me only 2 active interfaces with data flow(except wlan), while I have all 5 of them connected, 1st is ISP (goes to bridged modem) other 4 are local, 2 is voip phone, 3 is ip tv, 4 is another wifi router (because somehow my sony vaio leptop is unable to connect to mik...

turalo

Hi guys, I need little help / advice configuring one of the ports on my mikrotik. I want the local lan port to have the highest priority and a reserved bandwidth, for example for voip to put it in priority 1 the most important ? and give a reserved bandwidth of 1mb ? any advice / help is much much a...

turalo

so I gues that's verrrry dificult ?

turalo

I still have very unstable wifi, any help is much much much appreciated. My wifi signal reaches 2 streets further, but at home mostly it's maximum bandwidht is 2-3mb, sometimes it goes up to 6-7mb but the biggest problem is that it's really unstable, sometimes it says connected but there is no inter...

turalo

my firmware is 2.41, and i cant seem to find newer version, maybe I'm looking wrong ? I have searched here : http://www.mikrotik.com/download and I found routeros : 5.20 ( m I doing it wrong ? ) when I disable TX chanins (HT TX chains) it shows me this error : Couldn't change Interface <wlan1> - no ...

turalo

Hi guys, today I found out that my MRB has a problem when I use WIFI, for days now I was having a bad internet connection, so now and then the internet speed was going from 8mb to 0.1 or 0.3 some like that, was getting verry slow, now checked the modem, the settings, also everything that could make ...

turalo

nobody any idea ?

turalo

Hi, anybody here has experience with forwarding and prioritizing specific eth port / traffic om MRB to specified VPN server outside ? So the example would be : I have one IPTV box, this one will be connected to ethernet port 5 (the 4th lan port on MRB) this IPTV box must get connected to a VPN serve...

turalo

Hy guys, I'm new with MRB, now after playing with it for more than a week I can normally set all default things, so now my router is working with my ISP and DHCP, i have enabled and used VPN, also certain needed ports are redirected and in the firewall working fine. Now I need a little advice / help...

turalo

it was all default, when I started, i made hard reset. but now everything works fine, I'v got VPN working, and also the remote management via www, ssh and winbox all working fine.

turalo

First of all, thanks for helping me so far. Now I'm able to do much more, indeed the problem was in the setting of the firewall/nat, I had some ports forwarded, but didnot set the interface which to ignore the forwardings, so all traffic with same traffic as in the forwarding was sent to internal se...

turalo

This router is so much more than a normal that I mostly use. is there a place where I can find the howto's to make this work ?

turalo

Yes, that could be the issiu, because I'm new to this, basicly what I wanted to do is to open the mail ports en some other ports for the servers that I have on my network, but as you say it works for all interfaces, so I gues all https traffic goes then back to my local servers ?

turalo

Well, now almost 1 o clock in the night, after hours of playing with this board, no succes, as soon as I change the tx power settings the router becomes crazy, not connecting, etc... after many resets an tryouts, suddenly the router started working in a normal way, now I can acces gmail.com and all ...

turalo

Hi, thanks for helping, I have checked the dynamic dns IP, and that one is right, I even used google's free dns servers with 8.8.8.8 and others for testing, still same problem it's not DNS cause it opens some sites, but others not, I have also tested with opening sites true IP, but the sites which a...

turalo

I hope somebody can help me with this soon.

thanks in advance.

turalo

Hi guys, I have this problem with my new RB751, I'm using it on a static IP base, I have set all basic settings and everything works fine. all computers have IP's, my Voip phones are connected and are able to make calls, I can visit some INTERNET pages, but some not, for example www.google.com works...

Search found 119 matches