Hi all, I'm seeing this in my logs when Uptime Kuma is running: container,info,debug 2023-12-10T11:25:03Z [RATE-LIMIT] INFO: remaining requests: 20 When I pause pinging hosts the message disappears. Can anyone help me to get rid of this please? I'm running it along with Adguard on an RB3011. Apart f...
Hi all, I want to mount a specific share on MTik as the client on an NFS server running on a linux box with 2 exports: /mnt/test /var/nfs-shares/general I want to mount /var/nfs-shares/general in slot "dockers". Testing from another linux box: mount 192.168.100.135:/var/nfs/general /nfs/ge...
@kivimart, thanks for the reply Started again from scratch and after wait extraction seems complete one of my CPUs is constantly utilising a lot of "management" console 0 0% ssh 0 0% networking 0 0% winbox 0 0% management 0 8% profiling 0 0% unclassified 0 2% cpu0 10% lcd 1 0% console 1 0%...
Hi all, I've tried several times following the pihole example but my container doesn't start and there's no logging. I'm using a USB flash drive as the root: /container mounts add dst=/etc/pihole name=pihole src=disk1/containers/pihole add dst=/etc/dnsmasq.d name=dnsmasq.d src=disk1/containers/dnsma...
So what's the chance of some decent documentation on this Mikrotik? We're all wasting a lot of time searching the wiki, forums and google
Any know exactly do to disable beamforming?
Hi all, We are a small but growing ISP / WISP about to evolve out network. At the moment we have almost 1000 customers and will be growing to around 2000 over the next year with continued growth thereafter. We have a 1G and a 500M feed into our network which will shortly be 5 x 1G. We are just takin...
Thanks for the reply,
Site-1 is DHCP server / PPPoE server and Site-2 is the client. There's no layer 2 between them. I'm starting again and will report back.
Hi all, I've been trying to test connecting a PPPoE client to a server over an OSPF / MPLS / VPLS network. The server is on Site-1 and the client is on Site-2. Here are the router configs: Site-1 /interface ethernet set [ find default-name=ether1 ] advertise=10M-half,10M-full,100M-half,100M-full,100...
Thanks for the replies, Sorry if my diagram isn't too clear. I've added PPPoE clients who get a mix of public and private, NATed addresses. The default routes on the routers will change if a link goes down. Also, if I srcnat will that then NAT my clients to the loopback address too? @pe1chl, could y...
Let's say we have an OSPF network like the attached where all routers can route between each other, link subnets are private and not NATed, loopback addresses are public. We can ping DNS and the internet from R4 when we specify the source addresses as one of the public loopbacks: > ping bbc.com src-...
Here's the reply I got from support: On 11 June 2018 at 07:04, Emils Z. [MikroTik Support] <support@mikrotik.com> wrote: > Hello Norrie, > > Although LAC is currently not supported in RouterOS, it is possible to use > RouterOS as LNS. LAC support may come in future, but there are no direct > plans a...
Thanks for the replies everyone. I think the whole point of the P2P option is to avoid any portforwarding on the router with or without uPNP enabled. We've had reports that these systems were working before the oweners became customers of ours
Hi all, We've a few clients who have recently installed security camera recorders (NVRs) on our network. The problem is that they are unable to view live feeds using the peer to peer option (P2P) on their phones. Has anyone seen this problem before? I wouldnt imagine that by default Router OS would ...
Hi all, We are currently carving up out public /22 into smaller subnets with a /29 being the smallest. We have a lot of small towers with PPPoE servers at most of them running OSPF. The public subnets are in stub areas and in area ranges so the routers are ABRs and only advertise the subnet and not ...
Thanks for the reply,
R1 is already announcing our /22 on BGP. At the moment we just get a default route from our upstream although this may change in the next few months. Meanwhile I'll look at the video
Hi all, Suppose I have a network like the one below. Paddy.png All routers are running OSPF in the backbone. R5 is an ABR with customers connecting via PPPoE. I want all customers except Cust1 to reach the internet via R4,R3,R2,R1 EXCEPT Cust1 who I would like to route via R6,R1. However, if any of ...
Hi all, Serious problem on at least 2 Powerboxes on 6.38.1, setps to reproduce: Do a system reset configuration with no default config. Using winbox connect via Mac and add an address to say, ether2, 192.168.88.1/24 Now, using cli: [admin@MikroTik] > system resource print uptime: 11m8s version: 6.38...
Hi all, please see diagram below: OSPF forum help request2.png I'm trying to get BGP and OSPF working between a Juniper SRX (packet mode) and the rest of our network. This is just a small part of what we have planned but I've broke it down into a small chunk. Here's the Juniper's OSPF config: # show...
Hi all, I want to use an RB2011 to allow wired and wireless office access with wireless-only access for guests daisychained. The RB2011 will connect to the internet and office LAN. It should provide wireless office access as well as wireless guest access on separate VLANs and SSIDs. It should trunk ...
Thanks for the reply, I'm not sure what you mean but maybe the diagram below will explain what I'm trying to do a bit better. The Individual offices must authenticate to an existing PPPoE server so, where should PPPoE-client connections go? The offices need to have NAT DHCP, DNS etc just like an ind...
Hi all, I have a site which shares an internet connection with 6 offices. each office must have its own PPPoE connection and the networks must be separate. I setup 2 metarouters on 3 RB2011 (just doing DHCP and NAT) to try this out but the throughput suffers quite a bit - I need to be able to supply...
Hi all, first post here, I'm trying to setup an RB2011iL-RM so that ETH10 is the WAN / Internet interface via DHCP and ETH1-ETH5 are all individual unbridged interfaces. Would someone be able to point me in the right direction please? I'm pretty new to routing and Mikrotik. Also, I'd prefer to use w...
Connecting a Draytek Vigor 2820 to Mikrotik PPPoE Server: Just a quickie. I couldn't get my 2820 to connect to our RB2011. I discovered that on the 2820, WAN >> General Setup section, in the "Display Name" field for WAN2 has to either blank or set to the service name of the MT router you'r...