I have same problem with gpen21 with FS.com SFP on Dutch FTTH networks. Fix would be appriciated! We need a fix for SFP negotiation now. As of release 2.14 GPEN21 and maybe others won't auto negotiate correctly with certain generic lasers in them. Using a very old 20km Mikrotik branded laser works. ...
Hello,
Thank you for contacting MikroTik Support.
We have observed the same behavior in our labs, and we are looking forward to fixing it in upcoming SwOS versions.
Currently, I can only suggest using a static IP address configuration.
Best regards,
Hi, today I received a GPEN21 testunit. We want to use it as a fiber to copper converter. All looks promising but i cannot get the unit to do dhcp request for management on a specific vlan (7). If it boots it does dhcp request untagged. Is there a way to force swos to use vlan 7 while optaining an I...
Hi, I have something very strange when upgrading to 6.44.6 I installed packages and log says that they are installed http://moolenburgh.eu/img/firmware.JPG After reboot, Mikrotik says they are not http://moolenburgh.eu/img/firmware2.JPG But in packages I see TR69 is 6.44.6 version but rest is not? h...
Does anybody know if it is possible to change or set router username/password with TR-069 Hi, AFAIK this is not possible directly, except you can probably use a .alter configuration file to accomplish this if you have already rolled out the devices. If you are still making the default config, you c...
folkeri - We have tested this and PPPoE works in our lab between two different devices with 6.35 version. It must be something specific in your case. Please reproduce situation when it is not wotkin, generate supout files on both of devices and send these files to support@mikrotik.com Files send. R...
PPPoE session from CCR1036-8G-2S+ (6.35) to RB1100 (6.35) is lost after upgrade and cannot be established anymore. Downgrade to 6.34.2 on CCR solved the problem.
You can use a Draytek V130 VDSL modem. Attached a config file that will put this modem in transparant bridge mode. You then can use the Mikrotik behind the Draytek. Transparant bridge will also support VLAN's on the Mikrotik configured "WAN" port. The config file sets the IP address of the...
Mikrotik, we need a 951 with faster CPU :D . The current board just won't do it on a 500Mb FTTH line with NAT. With routed subnet and tracking disabled it will do OK but tracking consumes all CPU power. We don't want to switch to other vendor, so please build a new model. For residential market the ...
It has something to do with ethernetports. When i put a file on FTP server of Mikrotik I can down/uploadload it with a speed of 50/50Mbps. A PC behind the Mikrotik will not get this throughput. I tried several different PC's and tried different settings in MSS and MTU. Witch Cisco 800 series or dire...