I have some problems with netflow v9 and ipfix. My ROS version is 6.48.4 For law regulations we send netflow statistics for NAT translations check. I recieved request to fix incorrect address in NAT address field. I have source internal address there with port 0 instead of external NAT address. I in...

Did you upgrade routerboot as well? (/system routerboard upgrade). And a decent (prolonged) power-off after that?

yes

I have the same problem using 6.46.6 bugfix firmware. Did anyone have any solutions ?

RouterOS

We also have CRS328-24P-4S+ and suffer from the same problem with rx overflows on trunk port. Trunk port is 10G connected with MikroTik SFP+ 1m direct attach cable
Previously we had sw of another vendor and it worked fine till it was damaged. 6.43.8 didn't help.

Hi all. I am suffering from queue simple problem on x86 machine. This is exactly the same problem written in this post https://forum.mikrotik.com/viewtopic.php?t=133535&start=250#p661069 Sometimes ( it can happen once a week or even more often) all simple queues stop working. There are more than...

here is my problem with 4K monitor. How to fix ?

So, have anybody tested c 612 chipset and if it works ?

How many connections is on the screen ?
As I suppose
26589 - is a current number of connections
524588 - max possible number of connections
What is 526041 items ?

Hi We currently use cambium epmp1000 devices in our network. We have more than 100+ clients connected to one AP working in 20 mhz channel width. The max throughput we archeved is 55/5 Mbit/s DL/UL per AP. The latency is about 40-50 ms and not so stable jitter. We are planning to install Mikrotik AP...

RB 912, 30 stations=40-50ms and ~50mbps, 40Mhz. Protocol nv2. I had to install another sector and split stations 15+15. Anyway if you have so many clients I don't see why not to install more AP's with higher gain sectors. We have not enough legal spectrum and I am afraid of self interference. GPS s...

Hi We currently use cambium epmp1000 devices in our network. We have more than 100+ clients connected to one AP working in 20 mhz channel width. The max throughput we archeved is 55/5 Mbit/s DL/UL per AP. The latency is about 40-50 ms and not so stable jitter. We are planning to install Mikrotik AP ...

I have made load balancing with the help of this instruction
http://wiki.mikrotik.com/wiki/Load_Bala ... e_Gateways
Balancing works fine but I cant access any of LAN devices
What is the way out?

upgraded my x86 to 6.7 from 5.26. Once 1-2 days bridge interface is removing itself!!! And all addresses which were on bridge interface are UNKNOWN! PPP users also cant connect becouse they were in bridge interface! Reboot helps, but i cant do it always. Which firmware (I mean 6.x version) should i ...

I haver the same ploblem, if i disable logging on disk, will it help?

I have the similiar problem.i have 2 x86 and I cant solve it. Whats the way out?

Im using Mikrotik for 2 years. Now I have 500 clients on MikroTik x86 and 200 mbit/s of uplink. Under the load of 50-70 mbits, approximately, i have and my clients have some problems with online video. when I try to watch the video 720 or 1080, sometimes its 480 and it always stops and loading then ...

Im using Mikrotik for 2 years. Now I have 500 clients on MikroTik x86 and 200 mbit/s of uplink. Under the load of 50-70 mbits, approximately, i have and my clients have some problems with online video. when I try to watch the video 720 or 1080, sometimes its 480 and it always stops and loading then ...

Im using Mikrotik for 2 years. Now I have 500 clients on MikroTik x86 and 200 mbit/s of uplink. Under the load of 50-70 mbits, approximately, i have and my clients have some problems with online video. when I try to watch the video 720 or 1080, sometimes its 480 and it always stops and loading then ...

Im using Mikrotik for 2 years. Now I have 500 clients on MikroTik x86 and 200 mbit/s of uplink. Under the load of 50-70 mbits, approximately, i have and my clients have some problems with online video. when I try to watch the video 720 or 1080, sometimes its 480 and it always stops and loading then ...

Im using Mikrotik for 2 years. Now I have 500 clients on MikroTik x86 and 200 mbit/s of uplink. Under the load of 50-70 mbits, approximately, i have and my clients have some problems with online video. when I try to watch the video 720 or 1080, sometimes its 480 and it always stops and loading then ...