In Tools/Profile we can see that the CPUs are not overloaded. What could be the reason? Many tasks are single threaded, so on a CCR, if any one core maxes out then you can have problems. Don't use bandwidth test from the same router to test the maximum rate, instead test from host connected to rout...

We have a router CCR1036-8G-2S + software version 6.42.2. This router is connected to the ISP using the BGP protocol. The connection is made via optic link with SFP + module S+31DLC10D. On this connection, the router can not exceed the outbound traffic limit by about 4 - 4.1 Gbps. This can be seen f...

Situation: There is mikrotik with two channels to the two ISP. The main channel ether1 with a static IP-address. Reserved channel is pppoe-out1 via ether2. Reserved channel has dynamic IP. We are trying to use IP-cloud functionality to know the current IP on the backup channel by the registered name...

Your accusations are unfair. I did not endorse and I say not the name of the competitor first. I picked up this theme to make your platform better. Not because I'm an altruist, but because I like it, we use it, and I do not want to re-learn again to a new vendor. "I come in peace" :) The d...

And second using a separate chip for data plane. And if the second advantage is controversial because advances in multi-core CPU can make this approach impractical. Then use such OS is a huge plus (IMHO). It sounds like you are comparing RouterOS to a general purpose operating system, which it is n...

That only works if there's no competition. It looks like UBNT want's to eat MT's lunch now with EdgeMax and my guess is that they will if MT does not step up. Considering the HUGE difference in feature set, it is going to take EdgeOS some years to even reach feature parity with what RouterOS curren...

I looked and found the interview. True, it was in Latvian, but with subtitles. Arnis Riekstins says that they are a global company. At the same time, even indicated in an interview approach to the selection of staff says that they want to stay "company as the family." My opinion it is the ...

I thought about the fact that my assumptions are questionable. Just did not write these doubts in a long document. I even believe that the founders have enough income from the company and they do not want more money. As we say - enough for bread and butter, and sometimes on the loaf with caviar. :) ...

I'm afraid to ask, programmers have outsourced work too? I'm afraid the answer to that question. :) But seriously I'm surprised that you do not understand the difference between CAN and SHOULD support. Your consultant will assist in nonworking time? on holidays? He will configure and reload equipmen...

Really can not beat Cisco TAC. I just now looked up and saw that MikroTik has not paid support which would be analogous to Smartnet. http://www.mikrotik.com/support.html - "3.You can hire a certified consultant for detailed configurations or network diagnostics" This is simply not serious ...

About the book. Books? I wrote a "books"? No, I wrote a "book" let it be "THE BOOK". :) A book that everyone can found - quickly, simply and clearly. A book to be read in order to become a specialist in network and telecom. A Mikrotik there only as a platform for practi...

About Internet shopping. Find Russia in Buy page. We find there is a great distributor NAG Telecom. We worked with them it is a known and respected company. They have an excellent website http://www.shop.nag.ru/search?word=mikrotik&page=1, which I use it. Hmm. I need to translate the expression ...

About Quickset. We talk a bit about various things. QuickSet not replace the need to "dumb mode" and vice versa. QuickSet is a minimal set of configuration required to put the router in work. It can not include too much or else it will be difficult to use. Possibilities RouterOS not fit in...

About Commit. Commit is useful when you need to make changes that will lead to a loss of connection. Such as changing the single time logins, tunnels, encryption, IP-addresses, routes and more. Commit command / concept allows you to not think about whether this is a command to the problems or not, a...

Most likely the truth is that MikroTik too little. Very difficult to develop a similar product being 100 to 1000 times less than the competition. But I see a way out is not to increase the cost of software but the increase in sales. The increase in cost will close the market of inexpensive CPE for t...

Innovation does not interfere with bug fixes. Another thing, if the number of employees can either fix old bugs or create new ones. :) And even in this case, innovation is more important in a changing world. For example what is the point of ideal dialup access server now? Why do you need a perfect D...

5 years ago, having been a decade of experience in networks and telecommunications, I had to solve the task of organizing hotspot. Study materiel showed that there is a company MikroTik with RouterOS platform. The problem was solved by building hotspot, and platform features were so great, and the s...

I can not understand the logic of launching the *.auto.rsc files I have simple file: :delay 30s /interface ethernet comment 0 "qwerty" looking at the interface ether1 I can see this script worked or not. After copying the file sometimes the script is executed, and sometimes not. And it's a...

Thanks for your answer, but as you can see I did not ask how to find the error. I asked how to ignore the error. A common problem - the creation of something that already exists. Yes it is possible to check for the existence before every creation. But it's much easier to ignore the error and continu...

When you run the import file-name = file.rsc script stops on error.
Can I say the import command ignore errors and continue?

Thanks
Dmitry

Mikrotik support said:
"It appears to be problem with some specific config option
Thanks, we will try to fix it in next version."

I have a router RB751U-2HnD. Software version - 5.20. I need to manipulate the routes from the script. I have the following configuration: [admin@MikroTik] /ip route> print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - ...