Similar issue on RB4011 - SFP+ 10G Copper.. had to disable/enable/change auto to hard code and back again a few times then it would work fine. (did try cold reboot as you did) Sorry, but I can´t agree. My RB4011iGS+5HacQ2HnD is connected via SFP+ with my CRS326-24S+2Q+ with an MikroTik DAC-Cable an...

Updated to 7.5 stable and have issue with sfp+. Every time I software reboot RB4011iGS+5HacQ2HnD, I keep getting "sfpplus1 fcs error on link" on sfpplus1 of CCR1016-12S-1S+. Winbox is connected to CCR1016-12S-1S+ as its the main router that everything connects to. The way to fix RB4011iGS+...

rplant, I think your right that even w/o the NAT the default ip route links all 0.0.0.0/0 packets to go somewhere, resulting in sfp1 activity. So I finally figured it out. Dam Mikrotik, that was a brain twister. After tinkering with the firewall filter, nat, mangle, raw to no avail. Either everythin...

Yeah, wifiwave2 is very different and needs a different approach. I too thought it was broken because there is no order any more, but its not broken and there is an explanation in the help docs, but its still just confusing. I will give you an example here of it working on my RB4011. I'm not sure if...

ether1 port and sfp1 port should be isolated since they are not bridged, so there should not be any 10.1.10.0/24 seen on sfp1. After adding NAT the sfp1 source must have the /ip dhcp-client address (in my case 192.168.0.X), and destination is the ping address 142.251.41.4. See enclosed image of what...

Please see enclosed image for more details. Can anyone explain why I'm seeing ipv4 LAN port activity on the WAN port in the Packet Sniffer with no NAT, and Interface is constantly incrementing byte/packet counter on the sfp1 tx direction? Please ignore the sfp1 rx activity, that's just unrelated act...

Has anyone figured out how to use the wifiwave2 ACCESS LIST to whitelist mac addresses that I want to allow entry? What I've tried with partial success is in the attached picture. Mac Address Mask is weird and it looks like a mask of "0" bit is to ignore mac bit, and "1" bit is n...

Got a question regarding 2.4GHz wireless interface on the RB4011iGS+5HacQ2HnD and Wave2. Correct me if I got this wrong, is the issue with 2.4GHz not working because it’s shared with the 4 antennas that’s used by the 5GHz and not separate? If so, I’m not sure if this will ever work unless you separa...

Ran into a problem with beta48 and SFP modules on CCR1016-12S-1S+. I'm using Intel modules that worked fine until beta48. Some reported data in the SFP fields is wrong like voltage and temperature, but this didn't cause any issues until beta48, and now they are randomly shutting off every few minute...

On boot system logs: system;error;critical error while running customized default configuration script: no such item Is this expected? (If it is I would like to see the severity reduced. " error " and " critical " raise alerts here.) Same issue pops up here.Log and Terminal say ...

Nevermind the nest thermostat issue, that was a bad mangle that made nest not work. Issue is now resolved with nest thermostat.

Whats up with wifi Signal Strength Range rules? Something changed and it looks wrong. See pic. BTW, anyone else having trouble with Nest Thermostats not getting internet access since rc16?

6.45beta6 kills SPF+ port in RB4011iGS+5HacQ2HnD-IN. I'm using the Maxxwave MW-SX+MM-US in the SFP+ port of the RB4011iGS+5HacQ2HnD-IN. With 6.45beta6 the SFP tab under interface its all empty and SFP+ is not functional. Tried a different Maxxwave MW-SX+MM-US and same issue. Downgraded to 6.44 (Stab...

I tried CAPsMAN local forwarding and internet speeds increased. I now get 300Mbps down and 400Mbps up. Would like more but not bad.

For a week now I have two access points in capsman working stably with iphone XS Max, with dual stack ip. Is it CAPsMAN with local or remote forwarding? Does changing it change the picture? I used remote forwarding. Here’s the site that helped me setup: https://techtrickszone.com/2018/08/01/mikroti...

TimurA - After trying a thousand different configurations that were suggested here and some common sense ones, your suggestion of using CAPsMAN worked! Finally. Confirmed with iPhone XS Max, iPhone XS, and iPad Pro 2018. Without CAPsMAN, 5GHz AC communication is unusable. Always used latest Testing ...

You can do it this way: /tool fetch mode=https url="https://yoursite.com/link/5eu1a1kkypnypbyseqzsq1ao4w" http-method=post http-data="payload={\"text\": \"Test\"}" This was added in the latest RouterOS 6.39 RC versions fetch - added "http-data" and ...

What's with the false critical messages in 6.38rc15 on my 922UAGS-5HPacD?

Critical cpu overclocked
Critical memory overclocked

Wow! This new wireless-rep is fantastic! All my UDP packets are consistent, I have not lost a single packet! Amazing work guys!

800 is in hex and is equal to 2048 in decimal. Both are the same, just displayed differently.

Type Protocol
0x0800 Internet Protocol version 4 (IPv4)

I have the same setup RB922UAGS-5HPacD with R11e-2HPnD and I too have noticed decreased performance with wifi internal 5GHz, but wired computers to the CCR are flying. A reboot of the RB922UAGS-5HPacD corrects all slowdowns for awhile. Using 6.33rc24.

Great article and pics!

I need to do the same. The TG.35.8113 (big flat antenna) and MB.200.C (antenna mount) would be best for my application. I live in the US and I'm having trouble finding them online, can you provide the info where you bought them from. Thanks!

Two SSID-s... When user buy it to see that is dual band device (out of box and on first turn on). After that, enyone can change settings by his need. I use 5Ghz for Streaming (DLNA, IP cam...)and 2,4 Ghz for Web surf...So my SSID-s on end-user devices are called "Streaming Band" (5GHz) an...

I'd prefer separate for the reasons of separating slow devices from fast devices. As you know, slow devices can slow down the whole SSID for everyone.

Anyone else get this problem. If I leave the MAC Address alone, the card continues to work. If I change the MAC in any way, even just the last digit and apply, it dies. Changing it back, and apply, alive again. This worked fine in 6.30rc11, before I upgraded to 6.30rc17.

Model: 922UAGS-5HPacD

Hi Everyone... Used the auto-updater today on my CCR (loving it) to get 6.24 (from 6.23) and one strange thing happened, my QOS wasn't throttling the download, but upload throttling was fine. I checked and it turned out that under query tree the download was using global parent with no-mark, and the...

For the peeps that have trouble with website still showing 6.18 and the "RouterOS v6.19 release candidate special release" section jumping to the home page. Use the below links to get the updates. http://download2.mikrotik.com/routeros/6.19/all_packages-mipsbe-6.19.zip http://download2.mik...

:global FanTempCount;

:if ($FanTempCount >= 0) do={
} else={
:set FanTempCount 0;
}

Check to see how many switches are in your mikrotik router, use winbox and select switch and port. Look at the list of ether ports and their associated switches. If you see more than one switch# then you can increase throughput by eliminating bridging ports and assigning 2nd port to be hardware swit...

I have 2 RB493G's and one of them is stuck in the /system health temperature: 47C forever. I made a script @ 30min schedule that emails me if the temp is not equal to 47C and it never does email me. Tried reformatting NAND and resetting everything to defaults, no luck. Using v6.0rc13 firmware. Can't...