MikroTik

leostereo

Hi guys. Im currently running bgp with two upstream providers. Currently I have only one /24 poublic subnet. I have been using prepend to stear downstream traffic between my peers and can notice some unexpected behaviours. Question is: Is there any other possible/recomended bgp atribute to acomplish...

leostereo

Mikrotik ROS does not have a IPv6 DHCP server ( something I really wish they had !!! ) If you need an easy/free IPv6 DHCP server , take a look at PfSense. PfSense is free PfSense is based on FreeBSD PfSense is available as on ISO. You simply boot the ISO to install the FreeBSD system with PfSense (...

leostereo

thanks for your words.
Have some questions.
If there is not support for ipv6 dhcp server ... why is it available on ipv6 menu ?
And.
How can I automatically pass default gateway without dhcp server ? how should I pass default gateway to client using SLACC ?

Thanks.

leostereo

Hi guys ... im very frustrated about setting my ipv6 lab. So far can not get a mkt dhcp server to assign ipv6 to mkt ipv6 client. Weird thing is interconecting third party box , like huawei router it works either as client or server with mkt. Can you point any working example ? Already tryed with: h...

leostereo

still working on this ....
can not figure out.

leostereo

Hi guys, Issue #1 I succesfully set my mikrotik dhcp ipv6 server to serve ipv6 prefix from ipv6 pool. to huawei ont client. Server is not sending local link address as default gateway to ont. mikrotik dhcp client connected behind ont recibes ip from ont but without default gateway. So .... Dont know...

leostereo

Hi guys, Im using local-proxy-arp at my router gateway interface. This is usefull to control direct access between host in my lan network. Now I need to add a second interface/ip gateway and configure same host to go out on this new interface. I can not test it , since it is in production network bu...

leostereo

Hi guys , im trying to make a simple slaac work. I can not find any configuration for dummies working example. There are also a lot of documents mentioning about ipv6 bugs and incomplete features on mkt. Can you please point some working example ? Can you point incomplete features / bugs / not recom...

leostereo

Nope. CSS runs only SWOS

Thanks!!!

leostereo

Is it possible to boot router OS on my CSS326-24G-2S+RM ?
How to do it ?
There is no "boot routerOS" button on system tab.

Thanks.
Leandro.

leostereo

Hi guys , Im receiving from my provider following frame on my CRS317 (ver6.45) sfp interface. s-vlan : 1000 c-vlan : 600, 500. I need to remove the outer (s-vlan) and forward those paquets tagged with inner vlans (500 and 600) on another trunk interface. Of course .... I would like to use offload ch...

leostereo

It is better to do this kind of thing via API. You will have to familiarize your self at first, and maybe download and install a helper library, but then it becomes very easy to retrieve information and process it. I totally agree with you , but for some reason, I can not get existing user by name ...

leostereo

Hello , I need to find if specific user exist at hotspot users list. This is what im doing: sshpass -p 'api_user' ssh api_user\@172.30.7.2 -p22000 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null 'ip hotspot user print where name=60:8F:5C:B8:75:4F' And this is what I get: Flags: * - defau...

leostereo

Hi guys , im trying to set a "one click login" hotspot. According to this official article: https://wiki.mikrotik.com/wiki/Manual:Customizing_Hotspot#One_click_login It is possible to create a single user and then reutilize it so you dont need to create a new user per every user/device. I ...

leostereo

Hi guys, my hotspot is workign fine. I can login with trial and mac-address users. After user connects his mobile wifi to hotspot, it automatically redirects to login page and after successfully login , user can navigate. Problem is ...after uptime is reached , user can not navigate as expected but ...

leostereo

Hi leostereo May be these link can help you. I tried to achieve the same function with Node JS + Express JS, but it is still not working now. http://cotswoldpc.blogspot.com/p/mikrotik-routerboard-rb750up-simple.html https://wiki.mikrotik.com/wiki/HotSpot_external_login_page Hi , I have some improve...

leostereo

Hi guys. Im trying to authorize a client on my hotspot through the api using php client like: <?php require(dirname(__FILE__).'/routeros-api/routeros_api.class.php'); $host = '192.168.89.1'; $API = new RouterosAPI(); $API->debug = false; $API->timeout = 1; $API->attempts = 3; ob_start(); if ($API->c...

leostereo

Hi guys. I would like to control hotspot using the api. I want to add / remove users without user and password. This is what I have so far: Option1 , use trial users. This works ok when login from web page (login.html) , but can not get it working on the cli. [admin@oficina] > /ip hotspot active log...

leostereo

Hi guys. This is what I want to achieve. Set a hotspot service on my box. Users should be forwarded to captive portal. I want them just fill some basic form (name , email , ) no password requiered. Then they should be able to access to internet. Question is: What authentication method should I use ?...

leostereo

You cannot use Winbox to manage an Arista device as winbox is specific to MikroTik. You can use it as a route reflector if you want though and that will give you some visibility....but is that a good fit for your network architecture? However, you can use programs like Unimus or Ansible to manage a...

leostereo

Hi , guys. Im running out os hardware on my CCR1036 bgp border router. Im thinking about replacing it with an arista router-switch with bgp capabilities. Im very used to work with winbox and would like to keep using it to manage router routes. Is there some chance / possiblity to manage routes on ar...

leostereo

Hi guys. Our network traffic will soon reach our routers hardware limitations. We have been working with mikrotik since the beggining and we would like to continue using winbox to manage our routers. We recently adquiered some arista very powerfull switches-routers with bgp capabilities. So ... Im t...

leostereo

The scheduler is the advised way to do that. Just enter a one-time (00:00:00 repetition interval) job and set the correct time for it to run. I have a job like this in the scheduler at all times: /system scheduler add name=scheduled_reboot on-event="/system reboot" policy=\ ftp,reboot,rea...

leostereo

First, you need to understand that this solution will not work for the same scenario as it is often used in Cisco equipment! In Cisco, any config you have not explicitly saved will be lost when you reboot and the router comes back in the state that was last saved. However, in MikroTik this is not t...

leostereo

Hi guys , is there same way to set a script to force router to reboot withing 5 or 10 minutes ?
Something like cisco does:

reload in 10 - restart the router in 10 minutes

Then , to cancel if needed:

reload cance

l

Ok , any idea would be wellcome.
Leandro.

leostereo

Hi guys , im trying to improve my bgp monitoring plugin. Currently I connects to my router using api interface , exce the bgp peers print command and parse its output to check if any of my peers is not in "stablished" status. I would like to avoid api connection. Router should run an sched...

leostereo

I think you want to achieve the wrong thing with the wrong tool. What do you want to do in the end? Ping 8.8.8.8 just for the sake of it? Or do you want to see if internet connection is available for instance? In that case I would suggest check out Chupaka post on failover, using recursive routing ...

leostereo

Hi guys. Im would like to add a routing mark to all my default routes. (I have 3 upstream isp providers connected). This is how my routes look like: bgp_status.png As you can see only route to gateway 10.80.25.1 is active but After set a routing mark for gateway 10.32.65.29, this route goes active. ...

leostereo

It worked !!!
Thanks.

leostereo

You can have other independent routing tables: /ip route add dst-address=0.0.0.0/0 gateway=<ISP1 gateway> routing-mark=ISP1 add dst-address=0.0.0.0/0 gateway=<ISP2 gateway> routing-mark=ISP2 ... And then use them with ping: /ping 198.41.0.4 routing-table=ISP2 Wow ... seems very nice solution. I wil...

leostereo

Hi guys. My border router has tree isp peers providers. There is an active default route and two backups (with lower distance). I would like to ping some internet ips (root servers for example) using those backup links. The idea is to compare service latency between my providers. Is there some way t...

leostereo

Hi guys , I need to test some wireless device performance.
Is it possible to pass traffic between two interfaces from same device ?
I was thinking creating a /30 subnet with interfaces from differents vrfs.
Lets....try,
Leandro.

leostereo

Hi guys: I would like to share a picture about my situation: Two ccr1036 routing similar amout of traffic but with very different cpu load. Please take a look: routers.png I can show follwing similar behaviour: a_tool->profile: Both routers, shows very even load distribution on 36 cpus, most usage i...

leostereo

Ok ... good to hear that.
Leandro.

leostereo

Hi guys. After applying following doc: https://wiki.mikrotik.com/wiki/Manual:BGP_Load_Balancing_with_two_interfaces Im very satsified about it load balancing, it automatically loads 50 % aprox en each link. Problem is that failover is not working. After disabling one of both interface traffic goes d...

leostereo

hi guys. Im writting some route filters for my bgp connections. I found very anoying creating a chain for every prefix I need to advertise. Is there some way to create prefix lists like cisco does ? I already see the option under routing->Prefix Lists and can create multiple chains with same name bu...

leostereo

Hi , guys , after looking at following link: https://wiki.mikrotik.com/wiki/Manual:BGP_Load_Balancing_with_two_interfaces Have following feelings: Is it really doing load balance between both links or just automatic failover ? Is there any other working example to analize ? Comparing this method wit...

leostereo

Hi guys. Please consider following scenario: core_uen.png I would like to be able to fully manage traffic over links, so I can automatically balance traffic or manually stear among all the possible paths. For example, I would like to send traffic from R1 to R3 like this: Automatically or manually fo...

leostereo

Guys , thanks for your advices on this. After reading your advices , have following conclutions: a Implementing mpls should not increase resourses above pure ip implementation. b MPLS on mokrotik with redundant links can have some problems when path changes. MPLS on mikrotik does not support fast re...

leostereo

Hi guys , Im trying to show current traffic on the link between two mk routers like image bellow: link.png After I press enter, it shows correct value , but after next polling , value falls to half or less. No mather from wich device I take the value have same result. The interface im using is a vla...

leostereo

Hi guys. Im running a service backbone wich is composed by 3 CCR1036-8G-2S routers. Triangle topology is formed among them. 8 Gpbs total traffic is running on the backbone. Im considering implementing mpls in order to manage redundancy and load sharing in a better way. Question is ... What about rou...

leostereo

Hi guys, my router was generating very usefull interface graps but sudenly stoped generating them. While debuging founded that all rules for graphs were gone , like picture: empty.jpg When trying to add them again , nothing happends. Also trying from cli , I got timeout: [admintecnet@R_UEN] > /tool ...

leostereo

Hi guys, it is just another high cpu case. I have been looking on similar posts but could not find working response. I would like to know how to mitigate this high cpu cause. As you can see on image bellow: Image from librenms shows that there is allways a cpu at 100% (it can change among cpus). Ima...

leostereo

Hi guys: Im running a simple dhcp / router / nat config on my mikrotik rb CCR1036. I have 1000 users connected behind this router. Is there some way to monitor network usage (bytes,bits or packets) per destination ip ? Main idea is to detect legitimate users providing service to not legitimate users...

leostereo

Ethernet conector was no properly builded.
Regards.

leostereo

Hi guys , here I have my new RB4011iGS+ box. I configured it remotele over ssh. Problem is accessing to graphic interface , neither winbox nor webfig finishes loading. Webfig is stuked at "loading ...." and winbox in "loading descriptors" message. I already upgraded firmare to 6....

leostereo

Hi , guys , im sending emails from my mkt device with: /tool e-mail send file=backup to="leandro@pepe.com.ar" body=$body subject="system_backup_$[/system identity get name]" I would like to set the $body variable to send the output of: /system resource print How can I do it ? So ...

leostereo

Hi guys.
Im runing dude on vmware using vmdk image.
Problem is that virtual machine disk is very small.
I asigned 16gb but system is using 65Mb.
Is it possible to take all disk space ? Can you share some docs about doing it ?
Regads.
Leandro.

leostereo

Here is the answer:
viewtopic.php?f=14&t=152623&p=753402#p753402
Hope you can use.

leostereo

Using snmp V3 works as expected !!!

leostereo

Check out these threads ..

viewtopic.php?t=64572

viewtopic.php?t=72898

viewtopic.php?t=64572
is exactly what i was looking.
You are golden angel from sky.
Thanks!!!!

leostereo

Hi guys, Im trying to find some way to properly monitor and trigger notifications when bgp sessions and default routes changes on my mkt edge router. Mine is a CCR1036-8G-2S+ running 6.44.5 (long-term). Since mkt does not provide bgp state info over snmp , I need to go for different aproach. Mkt sup...

leostereo

Hi guys, im trying to trigger a custom telegram notification from comand line. I already have this working , creating a "execute on server" notification type when a host is down. The command is: tool fetch url="https://api.telegram.org/{mitoken}/sendMessage\?chat_id=-{number}&text...

leostereo

Currently, RouterOS doesn't have BGP info through SNMP. We are expecting anxiously for this feature.

By the way, if you are using Zabbix, you can find some ways to monitor you BGP sessions here:

https://share.zabbix.com

Thank you!

Thanks for the response!

leostereo

Dear Forum: We are trying to monitor bgp sessions but can not find usefull information about it. Our bgp router is CCR1036-8G-2S+ running 6.44.5 (long-term) It would be very useful for us if someone can provide your feedback on following items: a)_Can we install bgp mib for snmp quering ? .1.3.6.1.2...

leostereo

Hi guys , im trying to create traffic interface graph for my CCR1036-8G-2S using standard snmp collectors. So far , i can not create graph properly using: Cacti Observium. Mrtg. Librenms. With any mentioned above tools , have same result: A chopped graph that can not go above 113Mbps. I think that p...

leostereo

Hi guys , I sucessfully created a traffic graph on dude server.
Now I would like to graph 95th percentile on same interface with in and out bps traffic, similar like cacti does.
Is it possible on the dude?
Regards.
Leandro.

leostereo

seems to be a routerOS version issue:
After install a device with 6.43.16 routerOS , cacti can create traffic graph properly.
Regards.

leostereo

Hi guys. Im trying to get 95 percentile traffic graph for my mkt device on cacti platform. This is what I tryed so far: cacti versions: 1.2.4 and 1.1.19. device templates: cisco router , default snmp device , net-snmp device. mikrotik devices CCR 1009 with routerOS version 6.42.10 and 6.42.6. This i...

leostereo

Hi guys , this is the situation: Created a new device using both, cisco router and net-snmp generic device have same problem. Im getting a choped graph when traffic goes avobe 100mbps, similar when you set 32bits counter when 64bits are nedeed. Using 64bits counter Im getting nan on graph. It is fir...

leostereo

Hi guys , im seeing an exesive icmp and snmp request coming from dude server to my monitored devices. I tryed setting the probe interval time to 5mins at the device and also in the ping probe but still seeing pings and snmp request every 10 seconds at the monitored devices. I also rebooted the serve...

leostereo

Dear normis,
Thanks for your comment.
Im using windows 7 with spanish languaje.
My dude client uses english languajes, there is no way to change it , and there is not other languaje version. (I didnt find any).

What do you suggest ?
Thanks,
Leandro.

leostereo

Hy guys, Im trying to diplay connected stations in my ubiquiti nanostation ap. I dont have the oid that directly provides the integer for connected devices. Instead I have the oid that provides a line per connected station. So , how can I count the lines to get the desired number. I want to display ...

leostereo

Hi guys , im trying to set some speak notifications.
I noticed that speak notification reads with english accent my text , wich is in spanish so it sound very weird.
Is it some way to change this behaviour ?
Regards.
Leandro

leostereo

Hi guys. Im setting a dude monitoring platform for a noc center. We have forllowing main probes: 1 Ping to test reachability. 2 Rssi level for ptp links. 3 Connected clients for wifi nodes. I would like to: 1 ping , get red color on map when ping is down , this is ok since is the default behaviour. ...

leostereo

Hi guys , im working on the monitoring platform for an existing network with a lot of devices. First goal I want to achieve is to create most complete device template possible, so here I come with some questions. When creating a new device type , is it possible to specify default values for ? Icon =...

leostereo

Dear Maxsaf. Thanks for your response. I toke a look to the tool you mentioned. This graph you mentioned is hosted on the device , please correct me if im wrong. It is not good for production device. I would like to manage graphs from multiple devices from a centralized platform like cacti. I found ...

leostereo

Hi guys. Im setting a new monitoring platform. Since most of device we have are mikrotik we decided to go with the dude. Here is my question: I would like to set a dashboard view where I can quickly see 4 or 6 traffic graphs , something like cacti does. So , generally I would like to know how to pro...

leostereo

Hi ,guys.
Im looking for some way to query specific information from any device/service from the dude ?
Regards.

Something like:
curl http://[thedudeip]/api/devices/[device1]/cpu

Regards.
Leandro.

leostereo

Hi guys, after a lot of time (from 2012) I will manage a mikrotik network again. I found that new version of dude is 6.X and it runs only over routerOS. Where I can find the new features / improvement list of this new platform (dude ver6 + routerOS) over old dude running on windows. ? Regards, Leand...

leostereo

Configuration is ok , after upgrading all routers it worked!!
Regards.
Leandro.

leostereo

Hello guys , Here im trying to set up an mpls backbone using bgp and route reflector to distribute the reachable subnets. Route reflector is not in line with user traffic. There are three main subnets to be interconected: 192.168.111.0/24 , 50.1.1.0/24 and 40.1.1.0/24. So far I can ping between 192....

leostereo

solved .... I have a masquerade applyed to the outgoing traffic on the agregator1.
I deleted that rule on the firewall and bgp peering worked.
Thanks

leostereo

Thanks Murmaider , I already change those params on both peers but could not success.
Do you know how can I perfom some bgp debug ? I can not see any thing relevant on logs , is it possible to add more verbosity to log files ?
Any think alse to to try would be wellcome ,
Regards,
Leandro.

leostereo

Hi guys , please take a look to following image.
Main problem ... can not get router agregator 1 and route reflector to become peers.
Core and route reflector have no problem becoming peers.
Please help.
btw I can ping / telnet from route reflector to core and vice versa.

leostereo

I got it working.
Please let me know if you need my config.
Following I will try to make it point to multipoint.
Also need to check the performance (so far I can not get more than 6Mbps).
There is also an mtu issue there. For example now I need to set my pc to 1400 to make facebook work.

Leandro.

leostereo

Hi guys, I already have my nat / routing schemme working as show in the picture attached. Clients have internet access but traffic security is comprised when goes out the nat. I was trying to add some security to the network encripting outgoing traffic between the nat routers and the gateway but cou...

leostereo

Hello , my friend ... im looking the same. Did you try adding a new policy on the home router for the default route ? something like: /ip IPsec policy add src-address=10.10.10.0/24:any dst-address=0.0.0.0/24:any \ sa-src-address=1.1.3.137 sa-dst-address=1.1.2.2 \ tunnel=yes action=encrypt proposal=d...

leostereo

it is not what im looking for,
Thanks !

leostereo

Hi guys , as tittle say: Im using a 802.1x eschemme, so far everything is working ok with an inhouse solution but I would like to replace my NAS device for a mikrotik device. Arquitecture is as follow: [MYSQL]<===>[RADIUS]<====>[NAS]<====>[supplicant] I would like to use my routerboard 750 as NAS in...

leostereo

Hi , guys , I would like to know if is there a possiblity to apply configuration change and after applyed routerOS goes back if no confirmation is made in 5 mins for instance. This behaviour , similar than junos is very usefull in case you need to change something and can loss connection and managem...

leostereo

Very strange ... I performed same test replacing mikrotik for another switch witch rstp feature and it worked as espected, it takes half second to detect the loop condition and move the port to "bloqued" state. I think that switch notice the loop condition when he receives a bpdu over the ...

leostereo

Dear JArda and Inox: Since I have this problem I have been studing rstp, all docs explain and I tests how it prevent loops when connecting two ports of same switch. I did not4 find any example similar to my situation. However I performed the test using other switch with rstp feature and It worked. I...

leostereo

Hi , guys, I seems I have dummy switch connected to one of my rb750 ports. People bhind this switch make loops once a day at least, so I need to unplugg this cable. Is there some way to detect the loop by sensing the broadcast traffic and shutdown the port? It could be with a especific feature or an...

leostereo

Chechito , i dont understand your comment, could you be more clear?
Witch feature are you refering at?
Do you think is there any especific mechanism to handle my problem ?
Thanks for your response.
Leandro.

leostereo

Hello , guys , as tittle says, I need to protect my network against L2 loops produced by an unmanaged switch. The loop occurs when some one connects tho ports of same switch with a cable (see picture bellow). I would like to be able to shutdown the port of my managed mikrotik when the loop occurs. I...

leostereo

Thanks !!! your replyes were very usefull.
Leandro.

leostereo

I have been testing and can not find difference between those configurations. I prepare a switch using both aproaches and find that behaviour is same, looking packets with wireshark. I was expecting that bridge mode generate more arp traffic over the network since it would behave similar to a hub bu...

leostereo

Hello , guys I have been looking some stp / rstp implementation example but , could not find any.
Would you please point any link about it?

leostereo

Hello, I succesfullty get two vpls working between two lan segments and a common gateway as shown in diagram bellow: lan1 __ \ (MPLS_VPLS)___ Gateway. lan2 __ / I would like to know if is it possible to block traffic from LAN1 to LAN2 and vice versa. Since there are two bridges on the gateway side (...

leostereo

Hi , Im new working with routerOS, I would like write a few lines ,Ex: /systema identity set name="router1" /interface bridge add name="bridge1" /ip addreess add address=1.1.1.1 interface=ether1 then save, edit , execute , schedulle, etc. ******************** Up to now I can do: ...

leostereo

My problem is that can not make aligment tool work.
I can hear the beep , but only on the station side.
How to make led indicator work ?
Is it possible to make it work on both sides ??
any proceadure about it ?
bye,

Search found 92 matches