Community discussions

Search found 7531 matches

by jarda
Tue May 21, 2019 9:42 am
Forum: General
Topic: compared to the Internet speed
Replies: 2
Views: 259

Re: compared to the Internet speed

Upgrade branch office connectivity to desired speed. You cannot use what you don't have.
by jarda
Tue May 21, 2019 9:30 am
Forum: Wireless Networking
Topic: Optimize SXT Lite 5 PtP Link , bad CCQ
Replies: 1
Views: 232

Re: Optimize SXT Lite 5 PtP Link , bad CCQ

Distance, fresnel zone, alignment, interference. You wrote nothing about them, but you are missing 10db of signal level. You cannot beat the physics by any parameters. You can lower the tx power if devices are too close, you can lower the modulation, you can use more narrow band or change the freque...
by jarda
Tue May 21, 2019 8:21 am
Forum: General
Topic: New Setup Advice
Replies: 4
Views: 244

Re: New Setup Advice

As a router go for rb 750gr3 or hap ac2. Whatever else mikrotik device with enough ethernets would do the load balancing at such speeds too, but these two are much more capable than they look like. Number of balanced wans is virtually not limited. For outdoor ap suggestion you need to provide more i...
by jarda
Mon May 20, 2019 2:31 pm
Forum: RouterOS v7
Topic: RouterOS v7.0 beta1 - when?
Replies: 510
Views: 117512

Re: RouterOS v7.0 beta1 - when?

This is the day we were looking for. If there are any memorable dates in the Mikrotikls history, don't forget to add this day to it.

Now the question is: When we will be able to install the first public version?
by jarda
Thu Mar 07, 2019 6:29 pm
Forum: Beginner Basics
Topic: Forum have BUG 5 (five) years.
Replies: 9
Views: 758

Re: Forum have BUG 5 (five) years.

I have never had problem to unsubscribe. May happen the problem is specific to something unusual, but I used that feature many thousand times successfully, also during last five years.
by jarda
Thu Mar 07, 2019 5:37 pm
Forum: General
Topic: Out of disk space - upgrading hAP Lite from v6.35 to v6.35.2
Replies: 20
Views: 8380

Re: Out of disk space - upgrading hAP Lite from v6.35 to v6.35.2

I wrote nothing about netinstall. If it is remote installation, add eventually other one or two packages that are critically necessary to log in aside the single system package during the first installation process step. If you want to be sure that nothing bad happens, prepare second device and let ...
by jarda
Thu Mar 07, 2019 1:52 pm
Forum: General
Topic: BUG – v.6.44 on ARM boxes RB3011 is losing IPSEC configuration
Replies: 7
Views: 581

Re: BUG – v.6.44 on ARM boxes RB3011 is losing IPSEC configuration

I would like to know how is it possible that new installation doesn't wipe the system files enough so there could remain some older residue that affect behaviour of the newer version.
by jarda
Thu Mar 07, 2019 12:45 am
Forum: RouterOS v7
Topic: RouterOS v7.0 beta1 - when?
Replies: 510
Views: 117512

Re: RouterOS v7.0 beta1 - when?

May not... But others will be borned.
by jarda
Wed Mar 06, 2019 9:40 pm
Forum: RouterOS v7
Topic: RouterOS v7.0 beta1 - when?
Replies: 510
Views: 117512

Re: RouterOS v7.0 beta1 - when?

Ages are not ending by 2020.
by jarda
Wed Feb 13, 2019 7:10 am
Forum: General
Topic: RB4011iGS+5HacQ2HnD-IN 5Ghz SSID disappearing
Replies: 5
Views: 502

Re: RB4011iGS+5HacQ2HnD-IN 5Ghz SSID disappearing

You should start with searching in this forum and googling to find similar symptoms that already occurs to others. Then think about the described solution and try to implement it in your case. Upgrade to latest bugfix version is also recommended.

Odesláno z mého ANE-LX1 pomocí Tapatalk

by jarda
Mon Feb 11, 2019 4:19 pm
Forum: The Dude
Topic: HAP AC2 Dude
Replies: 1
Views: 366

Re: HAP AC2 Dude

This is common problem already known and discussed in other threads.

Odesláno z mého ANE-LX1 pomocí Tapatalk

by jarda
Tue Jan 15, 2019 11:38 pm
Forum: Announcements
Topic: v6.43.8 [stable] is released!
Replies: 169
Views: 29642

Re: v6.43.8 [stable] is released!

I've update a couple (±30) of RB2011/RB3011's hAP AC^2's and wAP AC devices from 6.43.4 to 6.43.8 and until now I got 2 wAP AC devices in an undefined state right after/during the update (update via capsman), they would not boot anymore. Luckily I'm able to power cycle these devices via PoE switche...
by jarda
Mon Jan 14, 2019 12:45 am
Forum: RouterBOARD hardware
Topic: Router that does not sound like a Jet Engine for Home 10G Internet?
Replies: 7
Views: 914

Re: Router that does not sound like a Jet Engine for Home 10G Internet?

It is possible to mod the router case to be able to dismount small fans from back and to put a big low profile fan on top. After then to set its speed under requested noise level. When the case is big enough, more than one fan can be used. Noise will be gone and cooling will be much better than with...
by jarda
Sat Nov 10, 2018 10:59 pm
Forum: Beginner Basics
Topic: How to Limit Internet Speed per IP? [SOLVED]
Replies: 3
Views: 673

Re: How to Limit Internet Speed per IP? [SOLVED]

Isn't fasttrack active?
by jarda
Wed Nov 07, 2018 2:58 pm
Forum: General
Topic: Restore backup on other mikrotik
Replies: 1
Views: 229

Re: Restore backup on other mikrotik

Read related topics and don't ask many times answered question.
by jarda
Mon Nov 05, 2018 4:16 pm
Forum: Virtualization
Topic: CHR neighbour discovery problem
Replies: 13
Views: 4298

Re: CHR neighbour discovery problem

Me too. Discovery of chr takes ages usually.
by jarda
Sat Nov 03, 2018 5:37 pm
Forum: The Dude
Topic: The Dude 6.40.8 - db failure: database disk image is malformed
Replies: 20
Views: 2978

Re: The Dude 6.40.8 - db failure: database disk image is malformed

Recent Dude is the same regardless the subversion number changes. The latest "older" version could be 4.0b3. I suspect the time changes during the device startup to be the reason for this error. It is something that does not happen in virtual environment as the running vm has still more or less corr...
by jarda
Sat Nov 03, 2018 11:08 am
Forum: General
Topic: RB435G wont boot after power failure
Replies: 7
Views: 532

Re: RB435G wont boot after power failure

Pull out the wifi cards and test again. Then put there back one by one and test between. Try more powerful power supply anyway.
by jarda
Thu Nov 01, 2018 4:52 pm
Forum: General
Topic: RB435G wont boot after power failure
Replies: 7
Views: 532

Re: RB435G wont boot after power failure

Check the capacitors.
by jarda
Thu Nov 01, 2018 3:05 pm
Forum: General
Topic: RB435G wont boot after power failure
Replies: 7
Views: 532

Re: RB435G wont boot after power failure

Hard to guess further. Maybe another netinstall could help.
by jarda
Thu Nov 01, 2018 11:06 am
Forum: Scripting
Topic: Erro no Script via Winbox / Error in Script via Winbox
Replies: 1
Views: 311

Re: Erro no Script via Winbox / Error in Script via Winbox

English only is enough. Don't ask to send reply to email and come back and discuss your topic publicly. It will help others to solve similar problems.
by jarda
Thu Nov 01, 2018 11:01 am
Forum: General
Topic: Cannot upgrade to version 6.43.4
Replies: 1
Views: 288

Re: Cannot upgrade to version 6.43.4

This was discussed few times in the past. Search the forum first.
by jarda
Thu Nov 01, 2018 10:59 am
Forum: General
Topic: RB435G wont boot after power failure
Replies: 7
Views: 532

Re: RB435G wont boot after power failure

Are there multiple partitions? Have you upgraded the routerboot also? Is the power supply providing enough current?
by jarda
Wed Oct 31, 2018 8:50 pm
Forum: The Dude
Topic: dude is disable in the packet list of winbox
Replies: 1
Views: 1461

Re: dude is disable in the packet list of winbox

Why did you installed dude into Sxt lite? It must be really old version as mipsbe is no longer supported by dude.
by jarda
Wed Oct 31, 2018 10:08 am
Forum: General
Topic: Logstail.com : Graph and analyze our Mikrotik
Replies: 7
Views: 1616

Re: Logstail.com : Graph and analyze our Mikrotik

Funny. It is impossible to get the graphs from the logs. At least it is mentioned that advertised feature is not even able to replace the dude.
I see this advertisement to be useless.
by jarda
Tue Oct 30, 2018 3:39 pm
Forum: RouterBOARD hardware
Topic: Bad Blocks?
Replies: 22
Views: 5544

Re: Bad Blocks?

It is safe in case the amount of bad blocks will not be rising. Keep it running and monitor the status. Make sure you are not writing into flash.
Make two partitions to prevent further accidental problems.
by jarda
Tue Oct 30, 2018 2:39 pm
Forum: RouterOS v6 RC and v7 BETA
Topic: v6 RC and v7 BETA
Replies: 122
Views: 19514

Re: v6 RC and v7 BETA

Whoever is interested in the dates can use a picture editor and add the dates he wants.
by jarda
Tue Oct 30, 2018 1:14 am
Forum: General
Topic: QoS (2018) que funcione
Replies: 0
Views: 450

Re: QoS (2018) que funcione

This is English only forum. Please rewrite your post in English. Thank you.
by jarda
Sat Oct 27, 2018 9:50 pm
Forum: RouterBOARD hardware
Topic: p2p link with two rb133c. Is it possible?
Replies: 1
Views: 434

Re: p2p link with two rb133c. Is it possible?

Yes. It is. But don't expect any great speed. As the mipsle support was dropped, you need to use old ros versions. Level 3 is enough for PTP link.
by jarda
Sat Oct 27, 2018 1:26 pm
Forum: Wireless Networking
Topic: Connect 2 locations 80m apart with obstacles
Replies: 6
Views: 835

Re: Connect 2 locations 80m apart with obstacles

Try, to avoid as many obstacles as possible. Use long poles. Move antennas on side of the buildings... If still some obstacles remain try high gain directional 2.4 GHz antenna and shoot through. You can also try to find a place to bounce a reflection. It is much better to find a path for wire than m...
by jarda
Sat Oct 27, 2018 12:08 pm
Forum: General
Topic: Network topology help. [SOLVED]
Replies: 5
Views: 610

Re: Network topology help. [SOLVED]

Approval can take some time. Moderators are working for free when they want. And we have to read everything...
by jarda
Sat Oct 27, 2018 12:00 pm
Forum: The Dude
Topic: How to use it?
Replies: 2
Views: 907

Re: How to use it?

There is no dude related development. We all can only be glad that the dude at least works somehow and mitigate the problems it has. Even those errors that are well known to mikrotik are not subjects to correction in reasonable future.
by jarda
Sat Oct 27, 2018 11:55 am
Forum: General
Topic: no service password-recovery
Replies: 1
Views: 210

Re: no service password-recovery

You cannot see the configuration without user access. You can just reset everything at once and get access to factory default configuration.
by jarda
Tue Oct 23, 2018 9:01 am
Forum: RouterOS v6 RC and v7 BETA
Topic: v6 RC and v7 BETA
Replies: 122
Views: 19514

Re: v6 RC and v7 BETA

At least we know that folders already exist.
by jarda
Fri Oct 19, 2018 4:36 pm
Forum: RouterOS v6 RC and v7 BETA
Topic: New IP cloud is coming.
Replies: 82
Views: 22049

Re: New IP cloud is coming.

Really? Everyone wants to have a supersecured router and you would give all your login details to a cloud?
by jarda
Fri Oct 19, 2018 4:32 pm
Forum: The Dude
Topic: Dude 4.0Beta3 not working correctly over Wine
Replies: 6
Views: 1581

Re: Dude 4.0Beta3 not working correctly over Wine

Is there any problem with Google? Or you cannot visit the mikrotik webpage?

https://wiki.mikrotik.com/wiki/Manual:CHR
by jarda
Fri Oct 19, 2018 11:56 am
Forum: General
Topic: Mejor opcion de MIKROTIK para 3000 abonados
Replies: 7
Views: 715

Re: Mejor opcion de MIKROTIK para 3000 abonados

We accept other language only on case the other the English translation is in the post simultaneously. This is just only English forum. If someone cannot speak English enough, he would be welcomed on any other mikrotik related forum that accepts his language. Unfortunately he will not be able to set...
by jarda
Fri Oct 19, 2018 11:49 am
Forum: General
Topic: Which Mikrotik Product To Buy?
Replies: 4
Views: 410

Re: Which Mikrotik Product To Buy?

Confirm that.
by jarda
Fri Oct 19, 2018 11:47 am
Forum: The Dude
Topic: Dude 4.0Beta3 not working correctly over Wine
Replies: 6
Views: 1581

Re: Dude 4.0Beta3 not working correctly over Wine

I don’t understand how to do that in Linux? And what is problem 4.0beta3 version, whu this not working?
Follow the manual.
by jarda
Fri Oct 19, 2018 7:30 am
Forum: General
Topic: Mejor opcion de MIKROTIK para 3000 abonados
Replies: 7
Views: 715

Re: Mejor opcion de MIKROTIK para 3000 abonados

Warning. This is English only forum. Please rewrite your post in English.
by jarda
Fri Oct 19, 2018 12:20 am
Forum: The Dude
Topic: Dude 4.0Beta3 not working correctly over Wine
Replies: 6
Views: 1581

Re: Dude 4.0Beta3 not working correctly over Wine

Use contemporary CHR for hosting the dude instead.
by jarda
Fri Oct 19, 2018 12:08 am
Forum: Scripting
Topic: wanna bypass ISP fair usage policy
Replies: 1
Views: 392

Re: wanna bypass ISP fair usage policy

... And what have you found?
by jarda
Thu Oct 18, 2018 11:34 am
Forum: The Dude
Topic: The Dude scan kills network connectivity
Replies: 4
Views: 1012

Re: The Dude scan kills network connectivity

I have no other idea than recheck the disk, it's format, router settings.. Maybe the netinstall can help as it clears everything out.
by jarda
Thu Oct 18, 2018 11:14 am
Forum: The Dude
Topic: The Dude 6.40.8 - db failure: database disk image is malformed
Replies: 20
Views: 2978

Re: The Dude 6.40.8 - db failure: database disk image is malformed

I have not seen this problem in CHR during last two weeks. Really strange.
by jarda
Tue Oct 16, 2018 1:51 pm
Forum: General
Topic: Network for children with limited Internet connection time
Replies: 9
Views: 578

Re: Network for children with limited Internet connection time

Read the manual.
https://wiki.mikrotik.com/wiki/Manual:Kid-control

Search the forum.

Don't create new threads for topics already discussed elsewhere.
by jarda
Fri Oct 12, 2018 7:55 pm
Forum: Beginner Basics
Topic: no "home AP" mode in SXT Lite 2
Replies: 16
Views: 963

Re: no "home AP" mode in SXT Lite 2

Return it to the seller with such argumentation. May happen he will accept that. No one else is guilty of the fact that you did not know what you bought.
by jarda
Fri Oct 12, 2018 2:30 pm
Forum: Beginner Basics
Topic: no "home AP" mode in SXT Lite 2
Replies: 16
Views: 963

Re: no "home AP" mode in SXT Lite 2

Therefore everyone should read the documentation first, or at least ask a dealer whether particular device will fit his needs.

You can sell this one and buy more appropriate device or buy and apply level 4 license to it.
by jarda
Fri Oct 12, 2018 11:57 am
Forum: Beginner Basics
Topic: First time Mikrotik User [SOLVED]
Replies: 5
Views: 564

Re: First time Mikrotik User [SOLVED]

And what kind of help do you expect here?