Community discussions

Search found 288 matches

by raffav
Fri Sep 20, 2019 8:42 pm
Forum: Beginner Basics
Topic: PPPoe connection to ISP with tagged VLAN
Replies: 18
Views: 1708

Re: PPPoe connection to ISP with tagged VLAN

Just create a normal VLAN and add the PPPoE on that VLAN interface and not on SFP
by raffav
Fri Sep 20, 2019 8:33 pm
Forum: Beginner Basics
Topic: Howto setup inter VLAN
Replies: 1
Views: 432

Re: Howto setup inter VLAN

by raffav
Tue Sep 17, 2019 10:51 pm
Forum: Scripting
Topic: Remove Mangle via MAC Address
Replies: 7
Views: 807

Re: Remove Mangle via MAC Address

The put will "echo" the variable


>:global var1 "hello"
> :put $var1          
hello
> :global var2 "world"
> :put $var2
world
>
by raffav
Fri Sep 13, 2019 10:49 pm
Forum: General
Topic: Suggestion: Completely virtual router based on two physical routers
Replies: 137
Views: 17207

Re: Suggestion: Completely virtual router based on two physical routers

6.45.6
When I run I just got a blank space like is was no value


"
[admin@MikroTik1] > :put $HAInstall

[admin@MikroTik1] >

"
by raffav
Fri Sep 13, 2019 10:39 pm
Forum: General
Topic: Suggestion: Completely virtual router based on two physical routers
Replies: 137
Views: 17207

Re: Suggestion: Completely virtual router based on two physical routers

last stable one

When I load the ha_init.rsc I got this msg
that was loaded
if I go to the sys scripts I see a bunch of scripts added
by raffav
Fri Sep 13, 2019 10:30 pm
Forum: General
Topic: Suggestion: Completely virtual router based on two physical routers
Replies: 137
Views: 17207

Re: Suggestion: Completely virtual router based on two physical routers

yes I imported
no no error /no logs
by raffav
Fri Sep 13, 2019 10:23 pm
Forum: General
Topic: Suggestion: Completely virtual router based on two physical routers
Replies: 137
Views: 17207

Re: Suggestion: Completely virtual router based on two physical routers

Hi My last time I had played with this was very time ago I am trying to play it again but I can't find it to make it work I got stuck after importing the file to load the scripts them I do not what to do it I past this on the terminal but nothing happens `$HAInstall interface="ether3" macA="00:0C:29...
by raffav
Fri Sep 13, 2019 9:16 pm
Forum: General
Topic: Suggestion: Completely virtual router based on two physical routers
Replies: 137
Views: 17207

Re: Suggestion: Completely virtual router based on two physical routers

Hi nathan1

This solution can work on the Chr version?
by raffav
Wed Sep 04, 2019 11:13 pm
Forum: Wireless Networking
Topic: RB4011 PoE output + cAP ac PoE input without PoE injector??
Replies: 2
Views: 424

Re: RB4011 PoE output + cAP ac PoE input without PoE injector??

According to quick guide for the CAP ac Powering The device accepts power from the Ethernet port, so you must either use the included passive PoE injector, or make sure your switch supports passive or 802.3af/at PoE output. Ethernet port accepts 12-57 V DC 802.3af/at or Passive PoE). The power consu...
by raffav
Sat Aug 24, 2019 12:21 pm
Forum: Announcements
Topic: Tik App, MikroTik android utility ALPHA test
Replies: 425
Views: 144519

Re: Tik App, MikroTik android utility ALPHA test

The new version on android crash when you enter master password

Sent from my Moto Z3 Play using Tapatalk

by raffav
Fri Jun 14, 2019 5:46 pm
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 305
Views: 71366

Re: v6.45beta [testing] is released!

Will it ever be possible to filter ipsec logs by peer? Debugging is pretty much impossible if you have a ton of tunnels active.
+1K
I think the log part need to be rebuild, for betther debugging
by raffav
Mon May 27, 2019 4:15 pm
Forum: Announcements
Topic: Tik App, MikroTik android utility ALPHA test
Replies: 425
Views: 144519

Re: Tik App, MikroTik android utility ALPHA test

When will you put the app on another store?
What store?
like store outside google and apple, just the APK
Maybe huawei smartphone detected :mrgreen: :mrgreen: :lol:
by raffav
Fri May 10, 2019 3:49 am
Forum: General
Topic: Suggestion: Completely virtual router based on two physical routers
Replies: 137
Views: 17207

Re: Suggestion: Completely virtual router based on two physical routers

Nathan1 It's a long time when I had played with this. So I don't know if have this already. It's possible to have a public management ip active on the standby router? If this already have ignore this post. Sent from my XT1580 using Tapatalk Hey Raffav, I do this with NAT from the master to the stan...
by raffav
Fri Apr 26, 2019 2:40 pm
Forum: General
Topic: Suggestion: Completely virtual router based on two physical routers
Replies: 137
Views: 17207

Re: Suggestion: Completely virtual router based on two physical routers

Nathan1

It's a long time when I had played with this.
So I don't know if have this already.

It's possible to have a public management ip active on the standby router?
If this already have ignore this post.



Sent from my XT1580 using Tapatalk

by raffav
Fri Apr 12, 2019 3:59 pm
Forum: Announcements
Topic: Winbox v3.18 released!
Replies: 49
Views: 71362

Re: Winbox v3.18 released!

If P2P/File transfer is restricted in the company network, then it might cause problems with a lot of things. None of which would be MikroTik's fault. But without knowing the whole story or setup it is hard to say what is and is not going on. I am sure MikroTik support can easily say if it is a Win...
by raffav
Wed Apr 10, 2019 5:22 pm
Forum: Announcements
Topic: Winbox v3.18 released!
Replies: 49
Views: 71362

Re: Winbox v3.18 released!

HI MT team

Winbox when downloading descriptors get stock. After some troubleshooting, I found that winbox is being blocked by P2P/File transfer restrictions in the company.
by raffav
Fri Mar 29, 2019 12:54 am
Forum: Announcements
Topic: Photos of towers and masts
Replies: 55
Views: 15697

Re: Photos of towers and masts

Recent installation on tower https://uploads.tapatalk-cdn.com/20190118/b9f909092b55e488aa654dcf5feb2c02.jpg https://uploads.tapatalk-cdn.com/20190118/3391a4f86d9c238fef1f6e01565f931e.jpg Sent from my SM-A520W using Tapatalk Hi how long it can stay on battery? Sent from my XT1580 using Tapatalk
by raffav
Wed Mar 20, 2019 12:46 pm
Forum: Announcements
Topic: Tik App, MikroTik android utility ALPHA test
Replies: 425
Views: 144519

Re: Tik App, MikroTik android utility ALPHA test

@normis
On the last MUM in the introduction by MT was told that you want to add some functionality that exists on the mobile app in the Winbox that mean that winbox will rebuild?


Features request: please add the search also in the iOS app
also please add the ability to sort them on both apps
by raffav
Fri Mar 08, 2019 7:24 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 219
Views: 36390

Re: v6.44 [stable] is released!

I still do not get what really is this new power line.
by raffav
Fri Mar 08, 2019 4:47 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 219
Views: 36390

Re: v6.44 [stable] is released!

Maybe its time for UK to change to EU plug. Ahh, I did forget UK goes out of EU :) I have travel around the world and UK plug is one the ugliest and largest plug out there.... I live in Sweden but I must say the UK plug is one of the bulkiest to work work with it is also one if the smartest with fu...
by raffav
Mon Mar 04, 2019 8:40 pm
Forum: Beginner Basics
Topic: Two Mikrortik with same WAN
Replies: 9
Views: 428

Re: Two Mikrortik with same WAN

I was wondering if there was a way to add a route in the ISP's Modem to do this
Which kind of VPN you are using
by raffav
Mon Mar 04, 2019 8:16 pm
Forum: Beginner Basics
Topic: Two Mikrortik with same WAN
Replies: 9
Views: 428

Re: Two Mikrortik with same WAN

And how do you expect to achieve this with only one Public IP?
by raffav
Mon Mar 04, 2019 8:11 pm
Forum: Beginner Basics
Topic: Two Mikrortik with same WAN
Replies: 9
Views: 428

Re: Two Mikrortik with same WAN

Do you have 2 public IP for that?
by raffav
Sat Mar 02, 2019 5:32 pm
Forum: General
Topic: Suggestion: Completely virtual router based on two physical routers
Replies: 137
Views: 17207

Re: Suggestion: Completely virtual router based on two physical routers

Wow, this project still alive...
Good I never had a chance to put it in production..

But very nice

Sent from my XT1580 using Tapatalk

by raffav
Fri Mar 01, 2019 5:48 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 219
Views: 36390

Re: v6.44 [stable] is released!

6.45 beta3 already? Wow, You guys are really cranking up the speed!
It's like 7.0 beta1 - it's probably here, but you don't see it and cannot upgrade to it xD Sorry...

Hahaha You are funny but I have to agree with you
by raffav
Tue Feb 26, 2019 3:43 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 219
Views: 36390

Re: v6.44 [stable] is released!

can we have cloud backup in winbox. me not so fan of cli.
I believe that will be in the future
by raffav
Tue Feb 26, 2019 2:38 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 219
Views: 36390

Re: v6.44 [stable] is released!

Nice MK,

Very big changes log, just waiting for the next Beta/rc version
by raffav
Mon Feb 18, 2019 8:42 pm
Forum: RouterBOARD hardware
Topic: New CCR1036-8G-2S+ with dual PSU - Voltage question
Replies: 4
Views: 855

Re: New CCR1036-8G-2S+ with dual PSU - Voltage question

Generally speaking according to colour code, there is 2 wire yellow and 2 black per socket
and this suppose to be 12v+12v

I'm taking as reference PC Power Supply
by raffav
Wed Feb 13, 2019 6:53 pm
Forum: General
Topic: Feature requests
Replies: 1160
Views: 208051

Re: Feature requests

It would be convinient to CAPSAM and DHCP to log to log not only MAC address but also HOSTNAME if it is known. Process of transforming MAC 2 HOST is tedious and if log changes quickly you have no chance to check who is associating/dhcping +infinity agree with that, Why in the logs cannot log the ho...
by raffav
Mon Feb 04, 2019 5:56 pm
Forum: Announcements
Topic: February Newsletter #87
Replies: 65
Views: 14532

Re: February Newsletter #87

Hello it's possible to a SFP+ Ethernet Module to have POE-out capability ? Great choice of thread to ask such question! No it's not. SFP and SFP+ have standardized maximum power draw (which is relatively low) so unless you'd like to power some ultra low powered device there's no chance. Also SFP is...
by raffav
Mon Feb 04, 2019 5:30 pm
Forum: Announcements
Topic: February Newsletter #87
Replies: 65
Views: 14532

Re: February Newsletter #87

Hello it's possible to a SFP+ Ethernet Module to have POE-out capability ?
by raffav
Wed Jan 16, 2019 8:56 pm
Forum: Announcements
Topic: Winbox v3.18 released!
Replies: 49
Views: 71362

Re: Winbox v3.18 released!

why dont have WinBox + MAC WinBox button?
That's probably because WinBox has neighbor discovery capability builtin.
WinBox discovery not working on VPN. The only way is thru IP>neighbor list.

Use the RoMon Function
by raffav
Tue Jan 15, 2019 1:10 pm
Forum: Announcements
Topic: Winbox v3.18 released!
Replies: 49
Views: 71362

Re: Winbox v3.18 released!

Also you can use indirect connections with
RoMon

Sent from my XT1580 using Tapatalk

by raffav
Fri Dec 21, 2018 12:08 am
Forum: Announcements
Topic: MikroTik News December 2018 (Issue #86)
Replies: 25
Views: 8845

Re: MikroTik News December 2018 (Issue #86)

Be aware that the powerline stuff will wipe out the entire HF spectrum and raise the anger of radio amateurs near to you. Don't care? You will. Radio Amateurs have equipment AND LICENSING to LEGALLY use TENS OF KILOWATTS EIRP on spectrum from 1MHz to 50GHz, and should you wipe out their hobby they ...
by raffav
Wed Dec 19, 2018 3:20 pm
Forum: Announcements
Topic: MikroTik News December 2018 (Issue #86)
Replies: 25
Views: 8845

Re: MikroTik News December 2018 (Issue #86)

Cool, RouterOS v7!
Is there a changelog?
You are joking right?


Sent from my XT1580 using Tapatalk

by raffav
Tue Dec 18, 2018 7:37 pm
Forum: General
Topic: Feature Request: SAFE MODE time based
Replies: 16
Views: 1815

Re: Feature Request: SAFE MODE time based

If you lose connection, how do you expect safe mode to remain activated? . Maybe if after the user, which started safe mode, gets disconnected ... and subsequently connects again before timer expires, the session would actually resume with safe mode activated and all? Possibly the timer would reset...
by raffav
Tue Dec 18, 2018 3:43 pm
Forum: General
Topic: Feature Request: SAFE MODE time based
Replies: 16
Views: 1815

Re: Feature Request: SAFE MODE time based

If you lose connection, how do you expect safe mode to remain activated?
Normis,

A simple flap on a interface (wan) cause safe mode to trigger...
So not always a brief loss of connection means that safe mode need to be triggered

Sent from my XT1580 using Tapatalk

by raffav
Tue Dec 18, 2018 2:00 pm
Forum: General
Topic: Feature Request: SAFE MODE time based
Replies: 16
Views: 1815

Re: Feature Request: SAFE MODE time based

Another good example Why safe mode need to re think Also Safe mode sometimes troll you: You are directly connected making simple changes. When you go terminal to exit safe mode it tell y that was overwrite by another one and exit sometimes it revert sometime it keeps the changes.. A slight differenc...
by raffav
Tue Dec 18, 2018 1:53 pm
Forum: General
Topic: Feature Request: SAFE MODE time based
Replies: 16
Views: 1815

Re: Feature Request: SAFE MODE time based

That is the point.. If you are remotely and make some changes, like move interface into a bridge or something similar, sometime you get disconnected and the safe mode is triggered.. Why just put a timer setting like Set 5 min make some changes if you made a mistake and get locked in 5 safe mode is t...
by raffav
Mon Dec 10, 2018 8:40 pm
Forum: General
Topic: Crowd Funding of v7
Replies: 32
Views: 5382

Re: Crowd Funding of v7

What are your queues? Telepathists are on another forum.
:lol: :lol: :lol:
good point
by raffav
Wed Dec 05, 2018 7:49 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 84074

Re: v6.44beta [testing] is released!

will still be single-threaded
kind of but not exactly
Enigmatic affirmation
:mrgreen:
by raffav
Sat Dec 01, 2018 2:25 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 84074

Re: v6.44beta [testing] is released!

...and bgp multithreading support when? First the hell has to freeze over. ;-) https://forum.mikrotik.com/viewtopic.php?f=1&t=141920#p699481 I have the feeling that maybe this will be last beta if not the last is going to a close ending.. Maybe we have some v7 beta to play with on this Christmas [e...
by raffav
Mon Nov 26, 2018 11:07 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 84074

Re: v6.44beta [testing] is released!

Have MikroTik stopped working at new version of RouterOS ? :(
I think maybe but just maybe they are ready for the 7v beta :)
would be a very nice Christmas present
by raffav
Sun Nov 11, 2018 11:38 pm
Forum: Virtualization
Topic: CHR license on router with no internet
Replies: 11
Views: 2153

Re: CHR license on router with no internet

Yes, it will keep working with full functionality, but will not allow upgrades. At least for now. Further restrictions could be added in time. @normis: Just as an idea wouldn't it be possible to integrate some kind of license generation tool over at mikrotik.com based on some sort of HW identifier ...
by raffav
Tue Oct 30, 2018 2:02 am
Forum: Announcements
Topic: Tik App, MikroTik android utility ALPHA test
Replies: 425
Views: 144519

Re: Tik App, MikroTik android utility ALPHA test

Hi, I like the design overhaul a lot. I've noticed a few bugs. On the main screen after logging in, the app is prompting me to update to the latest version, but I have already the latest version. Here are a few screenshots: @filipelias Your Firmware(BootLOADER) need an update, not software(RouterOS...
by raffav
Mon Oct 15, 2018 3:44 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 84074

Re: v6.44beta [testing] is released!

I previously had 6.44 b(~6 or 8, can't recall) and it didn't warn about either l2tp/ipsec psk nor ipsec certificates. I'm fairly certain it's a recent addition to the testing channel only. Test on the current/stable channel I was also trying to do that without success. Sent from my XT1580 using Tap...
by raffav
Sat Oct 13, 2018 11:22 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 84074

Re: v6.44beta [testing] is released!

Test on the current/stable channel I was also trying to do that without success. I think I'm running into a config bug in 6.44 Beta 20 I've upgraded my testing router and saw the L2TP/IPSec unsafe config notice. So I was playing around with configs to fix that. Once the L2TP peer is initially added,...
by raffav
Sat Oct 06, 2018 4:41 pm
Forum: Announcements
Topic: Tik App, MikroTik android utility ALPHA test
Replies: 425
Views: 144519

Re: Tik App, MikroTik android utility ALPHA test

Maybe is time to create a iOS thread
Also like the new page quick viewer
Hope to see this on android version too


Sent from my XT1580 using Tapatalk

by raffav
Fri Oct 05, 2018 7:46 pm
Forum: Announcements
Topic: Tik App, MikroTik android utility ALPHA test
Replies: 425
Views: 144519

Re: Tik App, MikroTik android utility ALPHA test

On IPad air 1 iOS 12 it crash when I open some mk device (all is using beta ros version)


Sent from my XT1580 using Tapatalk

by raffav
Tue Sep 18, 2018 10:11 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 84074

Re: v6.44beta [testing] is released!

Without an example we can not comment why you are not being able to import .rsc file. We recommend that you import file step-by-step if it is failing. Then you will see at which point configuration is not accepted and you can fix it or report a problem to support@mikrotik.com if there is one. Expor...
by raffav
Tue Aug 14, 2018 1:46 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113454

Re: v6.43rc [release candidate] is released!

Nice..
Good work
I get very happy when there are a lot of changes logs, even if I don't use 80% of this improvement , I get happy for whose does.
Can't wait to this became stable release.

Sent from my XT1580 using Tapatalk

by raffav
Thu Jul 12, 2018 11:39 am
Forum: Announcements
Topic: MikroTik News June 2018 (Issue #83)
Replies: 44
Views: 13698

Re: MikroTik News June 2018 (Issue #83)

I really would appreciate if mk start to make all variant of devices in black version too.

Sent from my XT1580 using Tapatalk

by raffav
Tue Jul 03, 2018 12:51 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113454

Re: v6.43rc [release candidate] is released!

Wow
Nice update..
That why I like mk always improving...


Sent from my XT1580 using Tapatalk

by raffav
Thu May 31, 2018 10:55 pm
Forum: Announcements
Topic: Winbox 3.14 released!
Replies: 77
Views: 25358

Re: Winbox 3.14 released!

@normis I'm getting a strange behavior I could't find a way to reproduce, but either don't know if related to ROS 6.43RC or Winbox in only one device a RB450G even if i put the correct pass i get error msg on winbox 3.14, I need to clear the pass and retype it and keep trying until I get access My p...
by raffav
Wed May 30, 2018 10:02 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113454

Re: v6.43rc [release candidate] is released!

So this means that now we don't need to set the user with 'password recovered' when using windows Radius?
!) radius - use MS-CHAPv2 for "login" service authentication;
by raffav
Wed May 23, 2018 5:19 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113454

Re: v6.43rc [release candidate] is released!

Where is the new topic about 3.14?


Sent from my XT1580 using Tapatalk

by raffav
Mon Apr 23, 2018 1:20 pm
Forum: Announcements
Topic: Advisory: Vulnerability exploiting the Winbox port [SOLVED]
Replies: 204
Views: 161611

Re: Advisory: Vulnerability exploiting the Winbox port

Change the service port can resolve the problem?
The problem with allow from is that not always we have static ip address
Suggestions could be that field accept dns names, or allow to read from addressing list

Sent from my XT1580 using Tapatalk

by raffav
Mon Mar 12, 2018 8:06 pm
Forum: General
Topic: RouterBOOT "auto-upgrade"!
Replies: 18
Views: 11166

Re: RouterBOOT "auto-upgrade"!

So any help?
How to set up this auto firmware update?

Sent from my XT1580 using Tapatalk

by raffav
Mon Mar 05, 2018 12:18 pm
Forum: Announcements
Topic: Newsletter #81 (March 2018)
Replies: 23
Views: 11273

Re: Newsletter #81 (March 2018)

The CRS328 looks like the first step towards an epic product line.

I can't wait for DC input option and Prestera DX33xx chipset for wirespeed Layer3
and there will be one made by MT ?
by raffav
Tue Feb 20, 2018 5:51 am
Forum: General
Topic: Possible security breach
Replies: 12
Views: 4939

Re: Possible security breach

HI
But looking on another way
This netwach trick is some kind of exploit
If some tech have limited privileges on group that him belong, he can promote the group tu full access.


Enviado de meu XT1580 usando Tapatalk

by raffav
Sat Feb 17, 2018 4:24 am
Forum: General
Topic: RouterBOOT "auto-upgrade"!
Replies: 18
Views: 11166

Re: RouterBOOT "auto-upgrade"!

Sorry for the dump question, but where i find this command, on terminal ? i cant find it thanks The command to update firmware is /system routerboard upgrade If you are asking about some other command, please be more specific what command you are asking about. Sorry, for bad explanation, but how to...
by raffav
Sat Feb 17, 2018 12:17 am
Forum: General
Topic: RouterBOOT "auto-upgrade"!
Replies: 18
Views: 11166

Re: RouterBOOT "auto-upgrade"!

Sorry for the dump question, but where i find this command, on terminal ?
i cant find it
thanks
by raffav
Sat Feb 10, 2018 1:12 am
Forum: Announcements
Topic: Winbox 3.12 released!
Replies: 55
Views: 43907

Re: Winbox 3.12 released!

freemannnn, bajodel

i have win10 using 3.12 and not have any issue
i also have create +40 dump address to test your scroll problem
create a bkp of your address delete it, and create a fresh on to see if the problem gos away
by raffav
Thu Feb 08, 2018 11:22 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97329

Re: v6.42rc [release candidate] is released!

Where is the dude client for RC24?
by raffav
Thu Feb 08, 2018 8:59 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97329

Re: v6.42rc [release candidate] is released!

MT support i can confirme that has a bug on this RC 24 version the dhcp-client is buggy, i cant make it work it has a Invalid on terminal i will set ip manual and sent a suport file to MT email edit unfortunately I cant set up manually because i get interface as invalid , so i cant send you a suppor...
by raffav
Thu Feb 08, 2018 6:28 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97329

Re: v6.42rc [release candidate] is released!

@Strods

Since this new crs Poe series is out, so this version belongs to the same of crs1xx having the same features or it have new features available on crs3xx series?


Enviado do meu iPad usando Tapatalk
by raffav
Mon Feb 05, 2018 4:55 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97329

Re: v6.42rc [release candidate] is released!

Hello
can someone give me a example how to use TLS-host i tryed to use facebook youtube, allot of site no one worked
by raffav
Sun Feb 04, 2018 12:54 am
Forum: Announcements
Topic: MikroTik News February 2018 (Issue #80)
Replies: 65
Views: 17085

Re: MikroTik News February 2018 (Issue #80)

RouterOS v7, how cool is that!
The what and where now? Nothing that I see in that Issue mentions V7???
I think it was a mistake...
I think he was joking about that.

Enviado de meu XT1580 usando Tapatalk

by raffav
Sat Feb 03, 2018 1:06 pm
Forum: Virtualization
Topic: CHR on OVH VPS SSD
Replies: 22
Views: 8158

Re: CHR on OVH VPS SSD

CHR can run only in full virtualization like vmware, kvm, xen or hyper-v Was a little pain in the ass to find a Linux on the ramnode repository that work smoth in 512mb and since I don't have skills on Linux I need to do some research how formart a disk via command line, After some live cd crash, f...
by raffav
Thu Feb 01, 2018 4:14 am
Forum: Virtualization
Topic: CHR on OVH VPS SSD
Replies: 22
Views: 8158

Re: CHR on OVH VPS SSD

Looks promissing. Thank you!
Hi,
Do you know if is possible to try this on openvps instead of kvm?
Because in ramnode there is a vpz small one that cost 15 dollars yearly, very cheap
@th0massin0
Edited
DIT

worked thanks allot
Untitled.png
Enviado de meu XT1580 usando Tapatalk
by raffav
Thu Feb 01, 2018 12:33 am
Forum: Virtualization
Topic: CHR on OVH VPS SSD
Replies: 22
Views: 8158

Re: CHR on OVH VPS SSD

Hello I am trying to install CHR on VPS OVH SSD from raw image (recovery mode and dd). cd /root curl -O http://download2.mikrotik.com/routeros/6.38.5/chr-6.38.5.img.zip gunzip -S .zip chr-6.38.5.img.zip umount /mnt/sdb1 dd if=/root/chr-6.38.5.img of=/dev/sdb After reboot RouterOS won't boot. I atta...
by raffav
Thu Feb 01, 2018 12:31 am
Forum: Virtualization
Topic: CHR suggestions for new functionality
Replies: 157
Views: 32411

Re: CHR suggestions for new functionality

Don't ask about CHR. I think that this product isn't interesting for MT developers as in the beginning of existence. To bypass your problem, use ISO of your favourite live linux (without installation) and my guide: https://forum.mikrotik.com/viewtopic.php?t=120413 Keep in mind if your cloud provide...
by raffav
Wed Jan 31, 2018 11:10 pm
Forum: Virtualization
Topic: CHR suggestions for new functionality
Replies: 157
Views: 32411

Re: CHR suggestions for new functionality

MT Support
is so difficult to create an iso version of CHR ?
because some KVM like ramnode dont allow to use virtual disk only iso
by raffav
Mon Jan 29, 2018 8:41 pm
Forum: Announcements
Topic: v6.41 [current]
Replies: 304
Views: 77930

Re: v6.41 [current]

hi everybody

My opinion is too bad over version 6.41 , i didnt find master port.........
best regards
Read the changes log before posting
Master port was removed, now is all on bridge interface

Enviado de meu XT1580 usando Tapatalk

by raffav
Fri Jan 26, 2018 1:12 am
Forum: General
Topic: Forum notifications!
Replies: 8
Views: 766

Re: Forum notifications!

They removed and email notification is crazy lol
maybe they are re making in
by raffav
Sun Jan 14, 2018 10:07 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97329

Re: v6.42rc [release candidate] is released!

MT Support freq.usage and wifi snooper on RC6 is not working it get freq monitor is not running / and ERROR not Running interface wireless frequency-monitor wlan1 FREQ USE NF frequency-monitor not running /interface wireless snooper> snoop wlan1 CHANNEL USE BW NET-COUNT NOISE-FLOOR STA-COUNT not run...
by raffav
Fri Jan 12, 2018 2:56 pm
Forum: Announcements
Topic: Newsletter 79 (MUM EUROPE ANNOUNCED!)
Replies: 33
Views: 12422

Re: Newsletter 79 (MUM EUROPE ANNOUNCED!)

Hello
I also want to know why the full poe switchs was not officially released, it was announced to be available on q4,
They had removed from the newsletter
Hope was delayed for a good reason, maybe an upgrade hardware


Enviado de meu XT1580 usando Tapatalk

by raffav
Thu Jan 04, 2018 12:48 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97329

Re: v6.42rc [release candidate] is released!

Get boot loop on CRS125-24G-1S-2HnD
after upgrade to rc5

It is something related to capsman , i think
if disable cap function it stop looping
by raffav
Fri Dec 29, 2017 4:06 am
Forum: General
Topic: Feature Request: SAFE MODE time based
Replies: 16
Views: 1815

Re: Feature Request: SAFE MODE time based

I hope mikrotik team need to think about this functionality

Enviado de meu XT1580 usando Tapatalk

by raffav
Thu Dec 28, 2017 2:14 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97329

Re: v6.42rc [release candidate] is released!

Cha0s - Before the fix Traffic Flow, for example, instead of reporting 5 packets per flow reported 6 packets. Simply reported one packet more than flow has actually processed; irghost - Can you provide an example of rule which you have tried out and seen that it is not working? /ip firewall filter ...
by raffav
Tue Dec 12, 2017 7:42 pm
Forum: General
Topic: Feature Request: SAFE MODE time based
Replies: 16
Views: 1815

Feature Request: SAFE MODE time based

I think that safe mode need to be more like time based than session based
since some times you need to change remotely a config and that maybe will obvious close the session but not necessary it a mistake
so it better to setup a timer
by raffav
Tue Dec 12, 2017 7:37 pm
Forum: Beginner Basics
Topic: Safe Mode Powercycle - Useless
Replies: 13
Views: 2186

Re: Safe Mode Powercycle - Useless

I agree i think that safe mode need to be more like time based than session based
since some times you need to change remotely a config and that maybe will obvious close the session but not necessary it a mistake
so it better to setup a timer


@uldis
by raffav
Wed Dec 06, 2017 5:29 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: v6.41rc [release candidate] is released! New bridge implementation!

any one figure out how to set up this:
"firewall - added "tls-host" firewall matcher "
by raffav
Mon Dec 04, 2017 2:54 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: v6.41rc [release candidate] is released! New bridge implementation!

What was the highest rc version ?
I also think they are fixing bugs, tweaking some functionality
Or maybe they are focus working on version 7 [emoji16]

Enviado de meu XT1580 usando Tapatalk

by raffav
Tue Nov 14, 2017 10:03 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: v6.41rc [release candidate] is released! New bridge implementation!

Hi
i am unable set a untagged management ip address using a RB450G and a CRS125
i had followed the wifi but i dont get it

any one can help
by raffav
Tue Nov 07, 2017 11:10 am
Forum: General
Topic: [OFF-TOPIC] Tapatalk push notification
Replies: 1
Views: 393

Re: [OFF-TOPIC] Tapatalk push notification

Nobody?
by raffav
Wed Oct 25, 2017 5:20 pm
Forum: General
Topic: [OFF-TOPIC] Tapatalk push notification
Replies: 1
Views: 393

[OFF-TOPIC] Tapatalk push notification

Hello,
I know that is off topic
but since some month ago the app is not more showing notification on subscriber topics here, it a forum issue or tapatalk app?

any one here having the same problem??
by raffav
Thu Oct 19, 2017 9:45 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: v6.41rc [release candidate] is released! New bridge implementation!

Mikrotik team

is it difficult to create some type of address-list or something similar to use on ipsec polices in future release ?
by raffav
Thu Oct 19, 2017 5:54 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: v6.41rc [release candidate] is released! New bridge implementation!

go to
/ip neighbor discovery-settings menu
and set discover-interface-list=all
this function is not available on winbox yet correct ?
by raffav
Fri Sep 22, 2017 5:42 pm
Forum: Announcements
Topic: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!
Replies: 109
Views: 29304

Re: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!

@normis
Hi
is the release of the switch with all port poe out delayed ?
by raffav
Fri Sep 08, 2017 5:15 pm
Forum: Virtualization
Topic: CHR suggestions for new functionality
Replies: 157
Views: 32411

Re: CHR suggestions for new functionality

@kasparskr
For OVA and ESXI
it don't know if it's possible to be able to select a OVA compatible version, since your ova is generated on a newest version, so who use esxi < 5.5 it is unable to run it
by raffav
Wed Sep 06, 2017 3:02 am
Forum: Virtualization
Topic: CHR suggestions for new functionality
Replies: 157
Views: 32411

Re: CHR suggestions for new functionality

I just think that some builder to customize the img on site, before download will be very cool
by raffav
Wed Aug 23, 2017 4:51 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: v6.41rc [release candidate] is released! New bridge implementation!

raffav - What do you mean with "don`t show up either"? Be more specific. This fixed as written in changelog "invalid PPPoE server or client after reboot or "interface" edit". Did you upgrade device and you see invalid (red) PPPoE server or client interface? i thought that fix applied to my case too...
by raffav
Wed Aug 23, 2017 4:32 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: v6.41rc [release candidate] is released! New bridge implementation!

@ Mikrotik Support
*) pppoe - fixed invalid PPPoE server or client after reboot or "interface" edit (introduced in v6.41rc9);
what this suppose to fix?
because even after this RC all my pppoe don't show up either
by raffav
Sat Aug 12, 2017 4:34 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: RE: Re: v6.41rc [release candidate] is released! New bridge implementation!

Hello is there any problem on PPPOE-out? after upgrade they desapear. pppoe-client configs disappear after upgrade. It also invalidates the firewall and NAT configs because the interface has disappeared. I reinstall the pppoe-client config and try enabling pppoe-client. I monitor the interface but ...
by raffav
Fri Aug 11, 2017 11:00 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: v6.41rc [release candidate] is released! New bridge implementation!

Hello

is there any problem on PPPOE-out?

after upgrade they desapear.
by raffav
Sat Jul 29, 2017 5:33 am
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: v6.41rc [release candidate] is released! New bridge implementation!

+1
Agree, need to be more simple, no offense but the Cisco way it very simple
Switch port mode trunk/access
Switch port access vlan x
Switch port trunk allow vlan x,y,z



Enviado do meu iPad usando Tapatalk
by raffav
Fri Jul 28, 2017 7:15 pm
Forum: General
Topic: VLAN configuration on CSR
Replies: 4
Views: 1168

Re: VLAN configuration on CSR

now vlan's are isolated (wireshark approved) : 1. pc1 can ping pc2 2. pc3 can ping pc4 but 3. CRS112 can not ping CRS125 4. i can't connect to any switch from 4,5 ports on CRS112 5.i can't connect to any switch from 4,6 ports on CRS125 How can i resolve this? try to remove this here drop-if-invalid...
by raffav
Thu Jul 27, 2017 5:56 pm
Forum: General
Topic: VLAN configuration on CSR
Replies: 4
Views: 1168

Re: VLAN configuration on CSR

export the config of the CSR
by raffav
Thu Jul 27, 2017 2:04 am
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: RE: Re: v6.41rc [release candidate] is released! New bridge implementation!

Hello everyone I'm confused on the crs 125 series what is the best way, Use the new vlan on bridge or stay using the switch menu? Thanks. Enviado de meu XT1580 usando Tapatalk My understanding from the 6.40rc36 and 38 releases was that the switch chip menu was to not be used for ports not in a new ...
by raffav
Wed Jul 26, 2017 2:52 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: v6.41rc [release candidate] is released! New bridge implementation!

Hello everyone
I'm confused on the crs 125 series what is the best way,
Use the new vlan on bridge or stay using the switch menu?
Thanks.

Enviado de meu XT1580 usando Tapatalk
by raffav
Thu Jul 20, 2017 8:16 pm
Forum: Announcements
Topic: Newsletter 76
Replies: 50
Views: 14928

Re: Newsletter 76

Hi

where is the news about the switch with all port with POE
by raffav
Tue Jul 18, 2017 5:29 pm
Forum: Announcements
Topic: MikroTik News December 2016 (Issue #74)
Replies: 94
Views: 22244

Re: MikroTik News December 2016 (Issue #74)

Hi

where is the news about the switch with all port with POE
by raffav
Fri Jul 14, 2017 2:36 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: RE: Re: v6.40rc [release candidate] is released! (New bridge implementation)

Not getting happier about this and I had to revert back current 39.2 to have my settings back. The backups I have all say "provide password" and I what am think WHAT password!!!! I tired many but none did work so that means all my carefully made backups are toast or is there some way to use them. T...
by raffav
Wed Jul 12, 2017 11:36 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: v6.40rc [release candidate] is released! (New bridge implementation)

@ Mikrotik Staff

using CRS125-24G-1S-2HnD is better/more performace
using this new way or keep using the switch menu
for trunk/access vlan ?
by raffav
Tue Jul 11, 2017 6:41 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: v6.40rc [release candidate] is released! (New bridge implementation)

I think in a complex VLAN scenario with tagged/untagged use, one simply should not use VLAN 1 or not use it for something important. ^^ Exactly the reason I create and use VLAN999 on all of my switch to switch (or VLAN speaking router) links as the untagged VLAN. I also ensure that no IP addressing...
by raffav
Tue Jul 11, 2017 5:54 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: RE: Re: v6.40rc [release candidate] is released! (New bridge implementation)

Another possibility would be to optionally create a default vlan rule for newly created bridges, allowing all tagged vlan-id on all ports of the bridge. If this does not trig a performance issue. I tried to put such a rule, with vlan-ids 2-4094. This does not seem to rise the CPU %. i think some li...
by raffav
Tue Jul 11, 2017 5:09 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: v6.40rc [release candidate] is released! (New bridge implementation)

@FIPTech
i still don't underhand what is your point with vlan1 tag/untag and what you want to do
by raffav
Tue Jul 11, 2017 2:38 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: RE: Re: v6.40rc [release candidate] is released! (New bridge implementation)

I think i would be interesting to have an option inside Winbox to automatically create a vlan rule on a brige when adding a vlan interface to it. This would create a vlan rule with the vlan id of the interface, including all bridge ports. Agree but winbox isn't alway possible to use. I still think ...
by raffav
Tue Jul 11, 2017 4:13 am
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: v6.40rc [release candidate] is released! (New bridge implementation)

@FIPTech thanks worked one thing that maybe need to be more simple is the interface/ bri/ vlan you need to do a "Feng Shu" and logical to reconfigure if you want to add some vlan to tagged or untagged this i my example i need trunk on ether23 on tag all my vlan 2,4-7,99,210,220 trunk on ether19 tag ...
by raffav
Tue Jul 11, 2017 1:08 am
Forum: RouterOS v7 BETA
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: RE: Re: v6.40rc [release candidate] is released! (New bridge implementation)

In my understanding native vlan is always untagged even on trunk port On cisco is 1 by default I used vlan 99 tagged to be my management vlan, but now on this new way I can't find PS My dot1q it is on my rb 450g where All vlan is set up on eth 2. And management ip is set to vlan 99 But I can't ping...
by raffav
Tue Jul 11, 2017 12:34 am
Forum: RouterOS v7 BETA
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: v6.40rc [release candidate] is released! (New bridge implementation)

In my understanding native vlan is always untagged even on trunk port On cisco is 1 by default I used vlan 99 tagged to be my management vlan, but now on this new way I can't find PS My dot1q it is on my rb 450g where All vlan is set up on eth 2. And management ip is set to vlan 99 But I can't ping ...
by raffav
Mon Jul 10, 2017 11:36 pm
Forum: RouterOS v7 BETA
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: v6.40rc [release candidate] is released! (New bridge implementation)

You are missing ether20 from the /interface vlan bridge section. Needs to be listed like add bridge=br-trunk1 untagged=ether20 vlan-ids=220 that is the problem it not 220 i my vlan 2 that not work access host print where !local Flags: L - local, E - external-fdb BRIDGE VID MAC-ADDRESS ON-INTERFACE ...
by raffav
Mon Jul 10, 2017 11:14 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: v6.40rc [release candidate] is released! (New bridge implementation)

Can any one help my on my senario ? i get a parcial to work i will use cisco term to be more simples on CRS TRUNK ETH 23 allow vlan 2,4,5,6,7,8,99,210,220 eth19 allow vlan 4,5,6,7,99 eth 22 allow vlan 210.220 Access vlan 2 port 2=8 vlan 220 port 20 so i do something like that /interface bridge port ...
by raffav
Mon Jul 10, 2017 7:54 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: RE: Re: RE: Re: v6.40rc [release candidate] is released! (New bridge implementation)

Seems right to me. Ether2 and ether8 are trunk ports for vlan 200, 300 and 400. Ether6 is trunk for vlan 300. Ether7 is trunk for vlan 200 and 400. Ether3 is access port for vlan 200, ether4 is access port for vlan 300, ether5 is access port for vlan 400. Sent from my LG-H910 using Tapatalk Is not,...
by raffav
Mon Jul 10, 2017 6:58 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: v6.40rc [release candidate] is released! (New bridge implementation)

Here is the article about new VLAN-aware bridge implementation: https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge#Bridge_VLAN_Filtering A couple examples will be added and more information will be updated based on your feedback. @becs Fixed On VLAN Example #2 (Trunk and Hybrid Ports) there is ...
by raffav
Mon Jul 10, 2017 2:54 am
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: RE: Re: RE: Re: v6.40rc [release candidate] is released! (New bridge implementation)

Hi @gtj Can you post your config? I have a 450g as router Crs 125 as layer 2 switch with vlan 2-8,99,210,220 using the switch menu But I can't figure out how to set up vlan on new config mode. As far as I can tell, there's no difference. You still use the switch menu to manage VLANs just as before....
by raffav
Mon Jul 10, 2017 2:20 am
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: RE: Re: v6.40rc [release candidate] is released! (New bridge implementation)

***WARNING*** Attempting to disable or delete a bridge port corresponding to a switched port will will render the device inaccessible!! Only a reboot will bring it back. Happens on my CCR1009 and CRS226's.
What you mean for switched port

Enviado de meu XT1580 usando Tapatalk
by raffav
Sun Jul 09, 2017 7:05 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: RE: Re: v6.40rc [release candidate] is released! (New bridge implementation)

Tested upgrade (not new features) on... CCR1009, 2xCRS226, RB922UAGS-5HPacT, RB Metal 2SHPn, RB493G All went OK except for the 1st CRS226. That switch was configured as a dumb switch. No bridges, all ports switched, 2 VLANS with the mgmt IP address on one of the ports. not the master as it turns ou...
by raffav
Sat Jul 08, 2017 8:28 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: v6.40rc [release candidate] is released! (New bridge implementation)

@idlemind

Thanks, by maybe this config is for the router side, I will give a try later.

As I using crs as a switch only , don't make sense that configuration, it will make useless the switch menu on crs


Enviado de meu XT1580 usando Tapatalk
by raffav
Sat Jul 08, 2017 7:41 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: v6.40rc [release candidate] is released! (New bridge implementation)

I roll back to the previous rc,
Until I figure out how to set up vlan and trunk on crs

Enviado de meu XT1580 usando Tapatalk
by raffav
Fri Jul 07, 2017 10:08 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: v6.40rc [release candidate] is released! (New bridge implementation)

Someone find how to set up vlan trunk on crs 125?


Enviado de meu XT1580 usando Tapatalk
by raffav
Fri Jul 07, 2017 4:01 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: v6.40rc [release candidate] is released! (New bridge implementation)

Nice,
Maybe new winbox is near?


Enviado de meu XT1580 usando Tapatalk
by raffav
Sat Jun 10, 2017 6:40 pm
Forum: Announcements
Topic: v6.39.2 [current]
Replies: 122
Views: 35005

Re: RE: Re: v6.39.2 [current]

BartoszP

I edited my post,
I was not making funny, don't exaggerate








Enviado de meu XT1580 usando Tapatalk
by raffav
Sat Jun 10, 2017 6:20 pm
Forum: RouterOS v7 BETA
Topic: v6.39.2 [current]
Replies: 122
Views: 35005

Re: RE: Re: v6.39.2 [current]

@BartoszP

Agree

Enviado de meu XT1580 usando Tapatalk
by raffav
Sat May 13, 2017 1:40 am
Forum: General
Topic: Which types of ports would you like to see for a high speed router
Replies: 168
Views: 25924

Re: RE: Re: Which types of ports would you like to see for a high speed router

Re: Which types of ports would you like to see for a high speed router I really like this topic !!! My suggestions are: - Possible special stack ports Where there is a minimum of two stack ports per device (or four ports) , which enables the ability to stack more than two Mikrotik devices. Where th...
by raffav
Fri May 12, 2017 2:58 pm
Forum: General
Topic: Which types of ports would you like to see for a high speed router
Replies: 168
Views: 25924

Re: RE: Re: RE: Re: Which types of ports would you like to see for a high speed router

...One mainboard and slots for different daughter cards .... are we going to be CISCO/Juniper like ? :-) And this is a problem? Not at all.... havn't you spotted :-) ? Stacking could be even the first step to HA funcionality which is missing for ROS. Ah ok I thought that you was complaining.... Ha ...
by raffav
Fri May 12, 2017 2:33 pm
Forum: General
Topic: Which types of ports would you like to see for a high speed router
Replies: 168
Views: 25924

Re: RE: Re: Which types of ports would you like to see for a high speed router

Primo. Is it possible to just make funcionality of stacking Mikrotik's devices ? High-end ones. Then we can buy models with proper ports and stack them. No need for zyllions versions .... Secundo. One mainboard and slots for different daughter cards .... are we going to be CISCO/Juniper like ? :-) ...
by raffav
Fri May 12, 2017 2:10 pm
Forum: General
Topic: Which types of ports would you like to see for a high speed router
Replies: 168
Views: 25924

Re: RE: Re: RE: Re: Which types of ports would you like to see for a high speed router

I think that would be a great idea some group of port be on a expansion slot so we can change the type depending on our needs. I think that would raise the costs for those routers too much. Fixed configurations would be a less expensive solution. 1x product design / mainboard with different ports a...
by raffav
Fri May 12, 2017 1:48 pm
Forum: General
Topic: Which types of ports would you like to see for a high speed router
Replies: 168
Views: 25924

Re: RE: Re: Which types of ports would you like to see for a high speed router

I think that would be a great idea some group of port be on a expansion slot so we can change the type depending on our needs. I think that would raise the costs for those routers too much. Fixed configurations would be a less expensive solution. 1x product design / mainboard with different ports a...
by raffav
Fri May 12, 2017 1:34 pm
Forum: General
Topic: Which types of ports would you like to see for a high speed router
Replies: 168
Views: 25924

Re: Which types of ports would you like to see for a high speed router

I think that would be a great idea some group of port be on a expansion slot so we can change the type depending on our needs.



Enviado de meu XT1580 usando Tapatalk
by raffav
Mon May 01, 2017 8:21 pm
Forum: Announcements
Topic: v6.39 [current]
Replies: 89
Views: 33878

Re: RE: Re: v6.39 [current]

L7 matching is becoming more and more difficult due to encryption, and the use of random portnumbers makes it difficult to apply it to a limited part of the traffic. That results in performance problems and false positives on traffic you did not want to filter. I know it is an unwelcome message, bu...
by raffav
Fri Apr 28, 2017 4:05 pm
Forum: Announcements
Topic: v6.39 [current]
Replies: 89
Views: 33878

Re: v6.39 [current]

Cool
Very big changelog
i a near future the changelog wil be on a book :lol:
by raffav
Thu Apr 27, 2017 5:07 pm
Forum: General
Topic: v6.39rc80 [release candidate] is released!
Replies: 63
Views: 10996

Re: RE: Re: v6.39rc80 [release candidate] is released!

Can you give some tips? You are using witch device? You are using virtual ap to? I think I am using it on a wrong way I have to apologize. I just received reports from my colleagues that user complain about massive disconnection and authentication problems => Back to something <6.39RC70 What was th...
by raffav
Thu Apr 27, 2017 2:23 pm
Forum: General
Topic: v6.39rc80 [release candidate] is released!
Replies: 63
Views: 10996

Re: RE: Re: v6.39rc80 [release candidate] is released!

Any one else getting WiFi poor performance, high latency, low Sinal quality, or even disconnecting offen, using capsman? I started to notice this behavior since >rc70 Starting from ~6.39rc60 CAPSMAN + all of my access point are running actually very well. No more complaints about slow connections o...
by raffav
Thu Apr 27, 2017 12:58 am
Forum: General
Topic: v6.39rc80 [release candidate] is released!
Replies: 63
Views: 10996

Re: v6.39rc80 [release candidate] is released!

Any one else getting WiFi poor performance, high latency, low Sinal quality, or even disconnecting offen, using capsman?
I started to notice this behavior since >rc70

Enviado de meu XT1580 usando Tapatalk
by raffav
Fri Mar 31, 2017 11:41 pm
Forum: RouterOS v7 BETA
Topic: MUM Europe 2017 Live!
Replies: 64
Views: 12533

Re: MUM Europe 2017 Live!

Hi. Is wsAP AC Lite ADSL modem? Whats phone jack on it?
i realy don't think so, since this ap is suppose to be installed on electrical socket , the phone jack is only a pass-through
by raffav
Fri Mar 31, 2017 6:57 pm
Forum: Announcements
Topic: MUM Europe 2017 Live!
Replies: 64
Views: 12533

Re: MUM Europe 2017 Live!

what is the propose of this "Woobm" device? ... (W)ireless (O)out (O)of (B)and (M)anagement. that would be... Management of a device, wirelessly, while not requiring the network to connect. so, e.i. i have a notebook but dont have utp cable i can plug this device on a mk device and access it via no...
by raffav
Fri Mar 31, 2017 6:25 pm
Forum: Announcements
Topic: MUM Europe 2017 Live!
Replies: 64
Views: 12533

Re: MUM Europe 2017 Live!

what is the propose of this "Woobm" device?
by raffav
Tue Mar 14, 2017 3:36 pm
Forum: Announcements
Topic: Winbox 3.11 released!
Replies: 94
Views: 285727

Re: Winbox 3.11 released!

@strods and any mk support team
Hello, any change to improve the find box?
it will be much more practical if when we search for something, it only show up the matches or at least highlight the lines instead of only the matched word
thanks
by raffav
Wed Mar 08, 2017 2:40 pm
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 391
Views: 82361

Re: RE: Re: v6.39rc [release candidate] is released

Seems that we have managed to reproduce this crash which was introduced in last rc release. We will try to fix it as soon as possible and release new version with fix included.
Can you tell what is causing?


Enviado de meu XT1580 usando Tapatalk
by raffav
Wed Mar 08, 2017 1:48 pm
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 391
Views: 82361

Re: RE: Re: RE: Re: v6.39rc [release candidate] is released

I have 433,433ah, Chr, crs125, base no 2, upgrade to. 45 ok. But I get 450g that I lost access after updating, I think is some configuration, that cause the crash and not related to hardware Enviado de meu XT1580 usando Tapatalk Just checked, I got a 450g updated normal to 45,so this crash is very ...
by raffav
Wed Mar 08, 2017 1:06 pm
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 391
Views: 82361

Re: RE: Re: v6.39rc [release candidate] is released

I have 433,433ah, Chr, crs125, base no 2, upgrade to. 45 ok. But I get 450g that I lost access after updating, I think is some configuration, that cause the crash and not related to hardware Enviado de meu XT1580 usando Tapatalk Just checked, I got a 450g updated normal to 45,so this crash is very ...
by raffav
Wed Mar 08, 2017 1:02 pm
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 391
Views: 82361

Re: v6.39rc [release candidate] is released

I have 433,433ah, Chr, crs125, base no 2, upgrade to. 45 ok.
But I get 450g that I lost access after updating,
I think is some configuration, that cause the crash and not related to hardware


Enviado de meu XT1580 usando Tapatalk
by raffav
Tue Mar 07, 2017 2:25 pm
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 391
Views: 82361

Re: RE: Re: v6.39rc [release candidate] is released

!) firewall - discontinued support for p2p matcher (old rules will become invalid);
What is the reason to drop it ?
I think that is because it not so much efficient in this days any more

Enviado de meu XT1580 usando Tapatalk
by raffav
Tue Feb 21, 2017 4:19 pm
Forum: Announcements
Topic: The Dude, v6.39rc test builds.
Replies: 121
Views: 28562

Re: The Dude, v6.39rc test builds.

Hello,
i don't know if is a Dude Problem or ROS Problem or Winbox
but i can not change value using the "dude on winbox"
ie on dude/probe if i change a port number and save it return to the default value
by raffav
Fri Feb 17, 2017 1:16 pm
Forum: Announcements
Topic: Winbox 3.11 released!
Replies: 94
Views: 285727

Re: Winbox 3.11 released!

What's new in v3.11: *) fixed wireless interface tabs, HT MCS tab was not shown in 5g/n/ac mode; *) ask for confirmation when exiting or disconnecting in Safe Mode; *) fixed problem where context menu Add command could not be selected if it had submenu; *) fixed problem where ip accounting settings...
by raffav
Mon Jan 23, 2017 4:38 pm
Forum: Announcements
Topic: Winbox 3.10 released!
Replies: 70
Views: 39918

Re: RE: Re: Winbox 3.10 released!

Is this version of winbox fixes "has stopped working" message at windows 10 insider preview build 15014 ?
Yes
Just try yourself

Enviado de meu XT1580 usando Tapatalk
by raffav
Fri Jan 20, 2017 3:44 pm
Forum: Announcements
Topic: Winbox 3.9 released!
Replies: 35
Views: 15605

Re: RE: Re: Winbox 3.9 released!

Windows Insider crashes and crashes on Exit will be fixed in next Winbox release. Thank you to those who reported these issues to support and sent supout files.
Thanks
Any idea when will be released?


Enviado de meu XT1580 usando Tapatalk
by raffav
Wed Jan 18, 2017 12:35 am
Forum: RouterOS v7 BETA
Topic: Winbox 3.9 released!
Replies: 35
Views: 15605

Re: Winbox 3.9 released!

Hi
All windows 10 insider preview user that is getting winbox crash.

I was thinking about
Maybe we get to work using a weird work around
If we install the the Linux that Windows is offering and inside we run wine?
Maybe it works



Enviado de meu XT1580 usando Tapatalk
by raffav
Mon Jan 16, 2017 6:08 pm
Forum: Announcements
Topic: Winbox 3.9 released!
Replies: 35
Views: 15605

Re: RE: Re: Winbox 3.9 released!

Still crashes on Win10 Insider, please get that heap corruption bug fixed.
It is a Windows problem, it was already reported on feedback hub


Enviado de meu XT1580 usando Tapatalk
by raffav
Mon Jan 16, 2017 4:44 pm
Forum: Announcements
Topic: Winbox 3.8 released!
Replies: 47
Views: 18182

Re: Winbox 3.8 released!

why are so many of you using this windows insider preview :) ?
i like to live on risk and test new features, and fix bugs and find new on

Windows 10 is getting better thanks to the program, and thanks the insider that report bugs and suggestion to it
by raffav
Mon Jan 16, 2017 4:36 pm
Forum: Announcements
Topic: Winbox 3.8 released!
Replies: 47
Views: 18182

Re: Winbox 3.8 released!

3.9 coming soon
maybe fix the windows insider preview bug ?
by raffav
Mon Jan 16, 2017 2:57 pm
Forum: Announcements
Topic: Winbox 3.8 released!
Replies: 47
Views: 18182

Re: Winbox 3.8 released!

I like friday releases :)

Friday, 13th...
But today is Monday and broken Winbox 3.8 is still on download site...
it was a joke man !
by raffav
Mon Jan 16, 2017 2:37 pm
Forum: Announcements
Topic: Winbox 3.8 released!
Replies: 47
Views: 18182

Re: Winbox 3.8 released!

For the nat problem I found a workaround If something related to the (protocol number) The problem Just type the protocol and the port field is enabled again https://uploads.tapatalk-cdn.com/20170116/e46be5c1f1a6240adddab7853e47a337.jpg The solution https://uploads.tapatalk-cdn.com/20170116/2be0d220...
by raffav
Fri Jan 13, 2017 2:30 pm
Forum: Announcements
Topic: Winbox 3.8 released!
Replies: 47
Views: 18182

Re: Winbox 3.8 released!

maisonmdsgreen - In Winbox loader please try to do "Tools/Clear Cache". Does issue persist? I am running Winbox 3.8 on Windows 10 without any problems. @strods need to be on windows 10 insider fast ring on build 15002.1001 For everyone having this problem Windows 10 Insider Preview 15007 (rs_prerel...
by raffav
Fri Jan 13, 2017 1:39 pm
Forum: Announcements
Topic: Winbox 3.8 released!
Replies: 47
Views: 18182

Re: Winbox 3.8 released!

maisonmdsgreen - In Winbox loader please try to do "Tools/Clear Cache". Does issue persist? I am running Winbox 3.8 on Windows 10 without any problems. @strods need to be on windows 10 insider fast ring on build 15002.1001 For everyone having this problem Windows 10 Insider Preview 15007 (rs_prerel...
by raffav
Fri Jan 13, 2017 1:37 pm
Forum: Announcements
Topic: Winbox 3.8 released!
Replies: 47
Views: 18182

Re: Winbox 3.8 released!

yeah this is still not fixing 3.8 dont fixed the problem, maybe is windows bug related, i will try some workaround Microsoft (R) Windows Debugger Version 10.0.14321.1024 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. *** wait with pending attach Symbol search path is: srv* Executabl...
by raffav
Thu Jan 12, 2017 3:10 pm
Forum: General
Topic: WinBox 3.7 crashes on Win10 15002
Replies: 23
Views: 3906

Re: WinBox 3.7 crashes on Win10 15002

+1 Here too
on event viewer i get the error on user32.dll
by raffav
Wed Jan 11, 2017 8:19 pm
Forum: Announcements
Topic: Winbox 3.7 released!
Replies: 63
Views: 111460

Re: Winbox 3.7 released!

Hello i got a update on windows 10 (15002) and winbox stop working Faulting application name: winbox.exe, version: 0.0.0.0, time stamp: 0x382f3815 Faulting module name: USER32.dll, version: 10.0.15002.1001, time stamp: 0x7d5c570a Exception code: 0xc000041d Fault offset: 0x00062ae1 Faulting process i...
by raffav
Sat Dec 24, 2016 4:58 pm
Forum: Announcements
Topic: MikroTik News December 2016 (Issue #74)
Replies: 94
Views: 22244

Re: MikroTik News December 2016 (Issue #74)

What is the meaning. X?
10ge copper interface?
And AC if for what


Enviado de meu XT1580 usando Tapatalk
by raffav
Tue Dec 20, 2016 4:51 pm
Forum: Announcements
Topic: MikroTik News December 2016 (Issue #74)
Replies: 94
Views: 22244

Re: MikroTik News December 2016 (Issue #74)

very good news on the new CRS, i think to that we need POE (active/passive) out on all switch port since all wireless device that MK sell have suport for POE in an also it wold be very nice that even the crs 8-24 port have a dual power supply since they are external it could be similar on the RB405G...
by raffav
Mon Dec 19, 2016 8:42 pm
Forum: Announcements
Topic: MikroTik News December 2016 (Issue #74)
Replies: 94
Views: 22244

Re: MikroTik News December 2016 (Issue #74)

Aboyr Hap AC lite Tower: Why ethernet ports ? It would be more logical Gigabit ports ... or do not ?
because it is LITE lol

but i agree with you.
by raffav
Thu Dec 08, 2016 2:34 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 75210

Re: v6.38rc [release candidate] is released

Version 6.38rc45 has been released. Changes since previous version: *) certificates - fixed pkcs12 export crash; *) ipsec - fixed peer configuration my-id IPv4 address endianness; *) ipsec - various additional work on IKEv1/IKEv2 support; *) winbox - added new ipsec feature (IKEv1/IKEv2/etc.) suppo...
by raffav
Mon Nov 28, 2016 4:06 pm
Forum: Announcements
Topic: v6.37.2 [current] is released!
Replies: 50
Views: 13683

Re: v6.37.2 [current] is released!

but the question is why i get conflict on the same device
Are you using NAT between the CAP and the manager?
no

Manager > switch > cap1/cap2/cap3
192.168.99.1 .2 / .3/ .5
by raffav
Mon Nov 28, 2016 3:25 pm
Forum: Announcements
Topic: v6.37.2 [current] is released!
Replies: 50
Views: 13683

Re: v6.37.2 [current] is released!

Thanks that i know,

but the question is why i get conflict on the same device
by raffav
Mon Nov 28, 2016 2:17 pm
Forum: Announcements
Topic: v6.37.2 [current] is released!
Replies: 50
Views: 13683

Re: v6.37.2 [current] is released!

Hello

any idea why this happens :
09:59:40 caps,error removing stale connection [::ffff:192.168.99.5:46897,Run,CAP-000C42955C76] because of ident conflict with [::ffff:192.168.99.5:57259,Join,CAP-000C42955C7
6] 
by raffav
Tue Nov 22, 2016 2:24 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 75210

Re: v6.38rc [release candidate] is released

Hello i think maybe is better talk about 6.37.1/6.37.2 on the 6.37.x Topic
by raffav
Mon Nov 21, 2016 10:23 pm
Forum: General
Topic: Suggestion: Completely virtual router based on two physical routers
Replies: 137
Views: 17207

Re: RE: Re: Suggestion: Completely virtual router based on two physical routers

Give this a go: https://github.com/svlsResearch/ha-mikrotik It does exactly what you are asking for, except for stateful connection synchronization. I have been using it to run 6 pairs of CCR1036 for over a year now. @nathan1 i was testing this on a lab using 2 450g, but for some reason on the firs...
by raffav
Mon Nov 21, 2016 9:57 pm
Forum: General
Topic: Suggestion: Completely virtual router based on two physical routers
Replies: 137
Views: 17207

Re: Suggestion: Completely virtual router based on two physical routers

Give this a go: https://github.com/svlsResearch/ha-mikrotik It does exactly what you are asking for, except for stateful connection synchronization. I have been using it to run 6 pairs of CCR1036 for over a year now. @nathan1 i was testing this on a lab using 2 450g, but for some reason on the firs...
by raffav
Mon Nov 21, 2016 9:51 pm
Forum: General
Topic: Suggestion: Completely virtual router based on two physical routers
Replies: 137
Views: 17207

Re: Suggestion: Completely virtual router based on two physical routers

Give this a go: https://github.com/svlsResearch/ha-mikrotik It does exactly what you are asking for, except for stateful connection synchronization. I have been using it to run 6 pairs of CCR1036 for over a year now. @nathan1 i was testing this on a lab using 2 450g, but for some reason on the firs...
by raffav
Tue Nov 08, 2016 9:26 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 75210

Re: v6.38rc [release candidate] is released

Hi, had to go back to RC19, for some reason internet navigation was getting problematic , and webpage not loaded very well,
this happens only on office, maybe RC 24-25 changes something that my network didn't worked as supposed to work.
i couldn't reproduce this behavior at home, our in a lab.
by raffav
Mon Nov 07, 2016 1:13 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 75210

Re: v6.38rc [release candidate] is released

@strods
that i know
i was talking about this
Version 6.38rcXXhas been released.
but never mind, it not important , was only a observation
by raffav
Mon Nov 07, 2016 12:45 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 75210

Re: v6.38rc [release candidate] is released

Version 6.38rc has been released. Changes since previous version: !) queues - significantly improved hashing algorithm in dynamic simple queue setups (fixes CPU load spikes on queue removal); !) ipsec - added IKEv1 xauth user authentication with RADIUS "/ip ipsec user settings set radius=yes" (cli ...
by raffav
Fri Nov 04, 2016 3:39 pm
Forum: Announcements
Topic: Winbox 3.7 released!
Replies: 63
Views: 111460

Re: Winbox 3.7 released!

There is a bug on Dude Menu, when you try to edit a probe port, they are ]hardcoded when you change and save it, the number go back to the default
by raffav
Fri Nov 04, 2016 3:06 pm
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 39501

Re: The Dude, v6.38rc test builds.

Hello, i still trying to figure out how i can make the dude server to read RouterOS info on a RB device that dont use the default Winbox Port There are two opttions available to read RouterOS info: 1) Use default Winbox port. 2) Make firewall NAT rule on your monitored RouterOS device, to redirect ...
by raffav
Fri Nov 04, 2016 1:46 pm
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 39501

Re: The Dude, v6.38rc test builds.

Hello, i still trying to figure out how i can make the dude server to read RouterOS info on a RB device that dont use the default Winbox Port
by raffav
Fri Oct 28, 2016 3:55 pm
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 39501

Re: The Dude, v6.38rc test builds.

You can specify probe port under device settings => Services => routeros mangement => Probe Port
sorry but i didn't find it or understand well
by raffav
Wed Oct 26, 2016 4:40 pm
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 39501

Re: The Dude, v6.38rc test builds.

testing the winbox dude session on device i put a mk device and iam getting connect failed: Connection refused(111) EDIT: find it, winbox port i cant understand way it is still not possible to set the on witch port Dude need to connect, Because server is now using winbox port. It no longer has sepa...
by raffav
Wed Oct 26, 2016 3:56 pm
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 39501

Re: The Dude, v6.38rc test builds.

testing the winbox dude session
on device i put a mk device and iam getting connect failed: Connection refused(111)

EDIT:
find it, winbox port

i cant understand way it is still not possible to set the on witch port Dude need to connect,
by raffav
Fri Oct 21, 2016 2:14 pm
Forum: Announcements
Topic: Tik App, MikroTik android utility ALPHA test
Replies: 425
Views: 144519

Re: Tik App, MikroTik android utility ALPHA test

Hello
it not allowed to upgrade device using the Tik App ?
if yes i cant find it
by raffav
Wed Oct 19, 2016 8:06 pm
Forum: Announcements
Topic: Winbox 3.7 released!
Replies: 63
Views: 111460

Re: Winbox 3.7 released!

Hello

i think winbox need to optimize the empty space on some menu windows,
ie on ipsec peer Encryption Algorithm and DH Group could optimized using the near empty space,
i have a 1366 x 768 Resolution, and can't see the bottom setting DPD interval.
by raffav
Fri Oct 14, 2016 11:52 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 75210

Re: v6.38rc [release candidate] is released

on my crs i cant reproduce this bug
probably a webfig-only bug? did you add it via winbox or shell?
winbox
will try over webfig and post back here, just a minute

EDIT
Via WEBFIG has the BUG
by raffav
Fri Oct 14, 2016 11:40 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 75210

Re: v6.38rc [release candidate] is released

v6.38rc: Firewall rule parsing broken in v6.38rc15, too [/code] on my crs i cant reproduce this bug [Vaselli@CRS] > ip firewall filter print Flags: X - disabled, I - invalid, D - dynamic 0 chain=output action=accept src-address=1.1.1.254 dst-address=254.254.254.128 log=no log-prefix="" 1 chain=forw...
by raffav
Fri Oct 14, 2016 10:06 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 75210

Re: v6.38rc [release candidate] is released

... Do not worry. Feature is not fully optimized. We will work on it in further rc releases. If you have not overclocked device manually, then do not worry about this message
by raffav
Fri Oct 14, 2016 12:46 am
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 75210

Re: RE: v6.38rc: Firewall rule parsing broken

I have identified a problem since v6.38rc (at least rc10 / up to rc14) on a range of different devices (CCR, CRS, hAP, CHR). When you add a firewall rule where you put a source or destination address and the 4th byte is >127, src/dst field is being rewritten to *.0.0.0. For example: 1.1.1.1 OK 1.1....
by raffav
Thu Oct 13, 2016 9:26 pm
Forum: RouterBOARD hardware
Topic: New CRS hardware? Show us some love
Replies: 23
Views: 4278

Re: New CRS hardware? Show us some love

Poe Out on all Port i think is very must have
by raffav
Tue Oct 11, 2016 5:41 am
Forum: Announcements
Topic: Winbox 3.7 released!
Replies: 63
Views: 111460

Re: Winbox 3.7 released!

Maybe would be good to add a third part number on the version for bug fix so we don't need to wait for the next release.

Enviado do Moto X Force
by raffav
Fri Oct 07, 2016 12:54 pm
Forum: Announcements
Topic: Winbox 3.6 released!
Replies: 25
Views: 9076

Re: RE: Re: Winbox 3.6 released!

I have a CCR1009 (6.38.rc 10), 2 CRS 24G and a RB3011 (6.38.rc10). Only in the CCR1009 the Winbox (3.6) crash on login process and the application closes. (Since 6.38.rc9 version) Access only the web. Please confirm Rb3011 won't crash? I had report that CHR and 3011 are having this problem. Enviado...
by raffav
Thu Oct 06, 2016 4:01 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 75210

Re: v6.38rc [release candidate] is released

Hello
can any one test to access a CHR running 38 RC with Winbox and se if can login in, ?
my winbox wont open, it donwload de plugin and after that close it
on terminal on log i see User Login via winbox and instantly after User logout via winbox
by raffav
Thu Oct 06, 2016 2:32 pm
Forum: Announcements
Topic: Winbox 3.6 released!
Replies: 25
Views: 9076

Re: Winbox 3.6 released!

raffav - I can not reproduce this in any way. Does it happen on multiple devices or on this particular one? @strods on that device(x86) i get 100% the time, but i already get it on another device (450g maybe) PS: got it on another one (on CHR) ps2: if you want i can give you a read access to my dev...
by raffav
Wed Oct 05, 2016 6:06 pm
Forum: Announcements
Topic: Winbox 3.6 released!
Replies: 25
Views: 9076

Re: Winbox 3.6 released!

Strods

me to have this problem with in line comments
i open a ticket time ago (Ticket#2016080466001351

PS: How i can upload the img directly to the forum ?

Image
by raffav
Fri Sep 30, 2016 3:40 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 75210

Re: v6.38rc [release candidate] is released

Via system package cant upgrade to 38rc since get msg "no dude.npk"
by raffav
Fri Sep 30, 2016 3:37 pm
Forum: Announcements
Topic: We have a new homepage!
Replies: 29
Views: 5296

Re: We have a new homepage!

account session still on old version (after logon)
Yes, client section is still the old design. It will be until we migrate all the ordering interfaces.
oh,, ok thanks
very nice the new look
by raffav
Fri Sep 30, 2016 3:09 pm
Forum: Announcements
Topic: We have a new homepage!
Replies: 29
Views: 5296

Re: We have a new homepage!

account session still on old version (after logon)
by raffav
Fri Sep 23, 2016 6:22 pm
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 34910

Re: v6.37 [current] is released!

[quote="miharoot"][/quote]

try reboot device twice or mybe try with netinstall
by raffav
Mon Sep 05, 2016 4:56 am
Forum: Announcements
Topic: Winbox 3.5 released!
Replies: 20
Views: 9487

Winbox 3.5 released!

Using the version is not possible to save fallback to on partition if the option next is in use, you can only change via cli


Enviado do meu iPad usando Tapatalk
by raffav
Thu Sep 01, 2016 11:36 pm
Forum: General
Topic: Feature-Request: QuickSet - enable RoMON
Replies: 8
Views: 1410

Re: Feature-Request: QuickSet - enable RoMON

Let me storm your brains: Make the quickset to be separate removable package. +1 even can be on the bundle package , enable as default but make possible to disable if we want also make basic mode and advanced mode and wireless and ethernet settings separated by TABs on basic mode can be just like i...
by raffav
Thu Sep 01, 2016 7:18 pm
Forum: Announcements
Topic: Winbox 3.5 released!
Replies: 20
Views: 9487

Re: Winbox 3.5 released!

I would like to see a change that would allow you to do "multiple selects" from the "Show Columns" drop down menu that seems to be accessible from most windows instead of having to do one select/deselect at a time. That would be cool !!!
+1
by raffav
Thu Sep 01, 2016 4:38 pm
Forum: Announcements
Topic: Winbox 3.5 released!
Replies: 20
Views: 9487

Re: Winbox 3.5 released!

You can move session folder, and also database folder to some custom location and then sync it whitout problem How?? move database open winbox file>new or save as> choose the destination path i.e dropbox/onedrive/drive move Session folder Open winbox tool>move session folder> choose the destination...
by raffav
Tue Aug 30, 2016 1:41 am
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: RE: Re: Cloud Hosted Router

Raffav and Normis, thank you for the clarification. Normis, as far as the ability to move the license around between different CHR instances is concerned: Is this still valid if I were to purchase your CHR PI-10 licenses from a reseller? Does it have to be any special type of PI-10 licenses? Or doe...
by raffav
Sun Aug 28, 2016 4:49 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: RE: Re: Cloud Hosted Router

Hi Normis, Congratulations to you and your team for a solid product. The CHR on KVM seems to be working nicely so far. Quick question: Let's say we have 5 powerful bare metal servers spread across continental US. And we have 5 total instances of "CHR + KVM" running on each of those five servers for...
by raffav
Sat Aug 27, 2016 11:10 pm
Forum: RouterOS v7 BETA
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 57275

Re: RE: Re: RE: Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

http://imgur.com/a/bJptd Just a silly question It not to check TX and RX on both chain? Enviado de meu XT1580 usando Tapatalk what silly i have click on tx chain 1 and u see on my image there my registered client not having a chain1 sgnal...zoom it see clearly No On your 1 print You check chain 0 T...
by raffav
Sat Aug 27, 2016 5:30 pm
Forum: RouterOS v7 BETA
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 57275

Re: RE: Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

http://imgur.com/a/bJptd Just a silly question It not to check TX and RX on both chain? Enviado de meu XT1580 usando Tapatalk what silly i have click on tx chain 1 and u see on my image there my registered client not having a chain1 sgnal...zoom it see clearly No On your 1 print You check chain 0 T...
by raffav
Sat Aug 27, 2016 5:01 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 57275

Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Just a silly question
It not to check TX and RX on both chain?


Enviado de meu XT1580 usando Tapatalk
by raffav
Thu Aug 25, 2016 1:22 pm
Forum: RouterOS v7 BETA
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 57275

v6.37rc [release candidate] is released, only one wireless package!

Don't use dynamic enable Use enable only Enviado de meu XT1580 usando Tapatalk wrong(. every time cap have a new number of virtual cap wlan on reconnect. if it's was be so easy i'm not write here. but thank you for your answer). Sorry, but sometimes is wrong there, My cap number don't change when d...
by raffav
Thu Aug 25, 2016 12:52 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 57275

Re: v6.37rc [release candidate] is released, only one wireless package!

Don't use dynamic enable
Use enable only

Enviado de meu XT1580 usando Tapatalk
by raffav
Tue Aug 23, 2016 9:37 pm
Forum: Wireless Networking
Topic: Capsman v2 + wpa2-eap + server 2012 NPS
Replies: 5
Views: 2319

Re: Capsman v2 + wpa2-eap + server 2012 NPS

Maybe this changes DC-side protections for Protected Users. Protected Users authenticating to a Windows Server 2012 R2 domain can no longer: Authenticate with NTLM authentication Use DES or RC4 cipher suites in Kerberos pre-authentication Be delegated with unconstrained or constrained delegation Ren...
by raffav
Fri Aug 19, 2016 11:06 pm
Forum: RouterOS v7 BETA
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 57275

Re: v6.37rc [release candidate] is released, only one wireless package!

Very strange thing on a RB450G when I do a port knock using tcp the RB reset all interface and lost connection
using rc19 version

port knock is 2 top sequencie 2468 and 55027

can any one using rc19 tray to se if the rb crash
by raffav
Thu Aug 18, 2016 7:03 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 57275

Re: v6.37rc [release candidate] is released, only one wireless package!

raffav I use „Extra packages” (all_packages...) the terminal I was not looking, important WinBox
ok
so maybe the problem is on the extra packages, my winbox is ok too
I don't lost any wifi configuration or interfaces
by raffav
Thu Aug 18, 2016 6:36 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 57275

Re: v6.37rc [release candidate] is released, only one wireless package!

6.37rc19 Do not use RB433UAH hide all interfaces wireless (winbox, web) ethernet random refresh, wireless no configuration (remembers previous settings, broadcasts), ....downgrade previous build 6.37rc15 for me is ok [raffaello@RJ-AT-MK02 - CAP1] > interface wireless print without-paging Flags: X -...
by raffav
Thu Aug 11, 2016 5:58 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 57275

Re: v6.37rc [release candidate] is released, only one wireless package!

Hi,

i think is not fair to post using a non english language :idea:
by raffav
Tue Aug 09, 2016 6:00 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 57275

Re: v6.37rc [release candidate] is released, only one wireless package!

Issue in auto update.. affected versions are 6.37rc12 and 6.37rc13. [admin@MikroTik] /system package update> set channel=release-candidate [admin@MikroTik] /system package update> print error - contact MikroTik support and send a supout file (10) [admin@MikroTik] /system package update> export # au...
by raffav
Fri Jul 29, 2016 10:44 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

i am stil waiting for a solution on my case, :(
by raffav
Fri Jul 29, 2016 2:12 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 57275

Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

It is your own responsibility to use correct country setting. Automatic discovery is never reliable, if you use IPv6 or VPN. 
That rc, fix the ping tool bug?
Because isn't on the changelog

Enviado de meu XT1580 usando Tapatalk
by raffav
Thu Jul 28, 2016 4:40 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

accessing my account  all my trial license instance was cleared but since i have a p1 paid license
now i cant transfer to a new instance because there is 0 instance on my account page,

(Ticket#2016072766000892)
by raffav
Wed Jul 27, 2016 1:35 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 57275

Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Please, create v6.36.1 from bug fix:
http://forum.mikrotik.com/viewtopic.php ... 25#p548501
:(
Hi
Until what version your script worked?


Enviado de meu XT1580 usando Tapatalk
by raffav
Tue Jun 14, 2016 7:23 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 65177

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

Before you was able to manually add dynamic entry without timeout. Now there's no such possibility. Thanks But how was possible? Never used this function Because I always set ip and hit ok for me that is a static entry He was adding them via command line, and including dynamic=yes in the command. M...
by raffav
Tue Jun 14, 2016 7:12 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 65177

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

Before you was able to manually add dynamic entry without timeout. Now there's no such possibility.
Thanks

But how was possible? Never used this function
Because I always set ip and hit ok for me that is a static entry
by raffav
Tue Jun 14, 2016 4:09 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 65177

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

Hello,
I am little lost what is that you are talking about, what was before and there is no more on address list
by raffav
Mon Apr 25, 2016 6:05 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 65177

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

ATTENTION ON CHR ON CHR under proxmox after upgrade 6.36rc5 to rc6 cant ping, telnet, winbox using hypervisor console can access it but freeze if i try to use the ping tool ip address print get no output ip arp print get no output need to ctrl +c to get back since I don’t have connectivity to the c...
by raffav
Mon Apr 25, 2016 3:35 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

I will be great if we can do some type of migration license from x86 to CHR since 3 type of level license has the same price Level 4 = P1 ($45) Level 5 = P10 ($95) Level 6 = Unlimited ($250) Any news/instuctions about this topic? I saw Normis asked raffav to contact support after this post, is that...
by raffav
Tue Apr 05, 2016 6:01 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

Is any one having problem with vlan/trunk on the RC46? on CRH?
by raffav
Sat Apr 02, 2016 5:39 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

same thing on BASEBOX2 and RB450G on RB450 using serial pot i get the kernel panic information that no system found so i think that when start the process uninstalling the old one an installing the news on it crash so there is no system at all via netinstall i was able to put rc45 up with no problem
by raffav
Fri Mar 25, 2016 6:18 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

tried everything and keep getting this error error.jpg I'm getting same error here.... When installing routerOS..... almost done and it fails with same error: http://img.ctrlv.in/img/16/01/05/568bbe885352f.png http://img.ctrlv.in/img/16/01/05/568bbddd19843.png The error is while installing the OS (...
by raffav
Thu Mar 24, 2016 3:37 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

Raffav, can you email support ?

yes, doing just now
by raffav
Thu Mar 24, 2016 3:33 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

I will be great if we can do some type of migration license from x86 to CHR since 3 type of level license has the same price


Level 4 = P1 ($45)
Level 5 = P10 ($95)
Level 6 = Unlimited ($250)
by raffav
Thu Mar 24, 2016 2:58 pm
Forum: Announcements
Topic: Winbox3.4 released!
Replies: 54
Views: 19328

Re: Winbox3.4 released!

IMHO it takes circa 24 to update "cache" where the update file is taken from.
good question,

for me "check update" there is no update for me yet
by raffav
Wed Mar 23, 2016 10:27 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

Hello

On proxmox i'am getting this bug
by raffav
Mon Mar 21, 2016 4:12 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

) winbox - added support for route action in mangle rules;
what is the usage of this new action ?
like a round-map on Cisco ?
by raffav
Sat Mar 19, 2016 1:46 am
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

Hello
can any one have any clue what about this error
Untitled.png
by raffav
Fri Mar 11, 2016 5:34 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

I am getting reboot on CHR
12:08:22 system,error,critical router was rebooted without proper shutdown
when CAPMAN is enable on any wifi pack CM2 or REP
by raffav
Fri Mar 11, 2016 4:32 pm
Forum: Announcements
Topic: Winbox3.2 released!
Replies: 59
Views: 11585

Re: Winbox3.2 released!

all my RB is ok on the RoMon is ok
in rc26 with winbox.3.2
by raffav
Thu Mar 10, 2016 11:03 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

ATTENTION
RC26
Maybe constant reboot on CHR
verifying if is a isolated case or on all CHR
testing on another CHR
ignore, it was a isolated case !!!
by raffav
Thu Mar 10, 2016 3:25 am
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

The license transfer has some kind of limit count or some type of cool down period to do a transfer again?
by raffav
Thu Mar 10, 2016 3:17 am
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

I don´t understand that 1Mbit limitation. It is only usefull to see if it runs or not. For testing I would be much more happy with the 24h test-version (or even less time), to see how it performs compared to the "old" virtualized x86 version. Hello Please read the wiki for chr You can test 60 day f...
by raffav
Wed Mar 09, 2016 11:01 pm
Forum: Announcements
Topic: Winbox3.2 released!
Replies: 59
Views: 11585

Re: Winbox3.2 released!

when winbox lost connection to device and you try to reconnect and the device is not accessible yet
you get a red erro msg and when that happens all saved address disappear and if you use master password the button change to set master password
by raffav
Wed Mar 09, 2016 10:50 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

v6.35rc21 after upgrade sxt Light lost access to device, device reboots every 60 seconds, after downgrade to v.6.35rc19 no more problems, I think there is any thing with ether port configuration causing this problem. The unice option to access the device is reset with reset button, and then downgra...
by raffav
Wed Mar 09, 2016 7:03 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

i think that the kernel boot loop is related to wifi-rep on the 433 or related to wireless card because at home i use a 433uah as capsman and there was no cap enable on it and also get the kernel boot i fallback to wifi-cm2 and the problem is gone, with cap enable i my case the wifi card is a xr2 o...
by raffav
Wed Mar 09, 2016 5:43 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

i think that the kernel boot loop is related to wifi-rep on the 433 or related to wireless card because at home i use a 433uah as capsman and there was no cap enable on it and also get the kernel boot i fallback to wifi-cm2 and the problem is gone, with cap enable i my case the wifi card is a xr2 on...
by raffav
Wed Mar 09, 2016 1:05 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash. If router goes into reboot loop, then if device has serial port send output of it within text file to supp...
by raffav
Wed Mar 09, 2016 7:50 am
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

ATTENTION
KERNEL BOOT LOOP ON RC21
On rb433 with wireless rep packege kernel boot,
If wifi-rep disable or switched to wifi-cm2 kernel ok
On crs125 all ok
by raffav
Sun Mar 06, 2016 3:10 am
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

Since the maybe(v34) this code for sent backup via ftp dont work any more the script broke between the \tool fetch if i copy the code and past on the terminal i get the error point [raffaello@RJ-AT-MK03 - CAP2] > [raffaello@RJ-AT-MK03 - CAP2] > [raffaello@RJ-AT-MK03 - CAP2] > /tool fetch address=$i...
by raffav
Fri Mar 04, 2016 5:52 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

Since the maybe(v34) this code for sent backup via ftp dont work any more the script broke between the \tool fetch if i copy the code and past on the terminal i get the error point [raffaello@RJ-AT-MK03 - CAP2] > [raffaello@RJ-AT-MK03 - CAP2] > [raffaello@RJ-AT-MK03 - CAP2] > /tool fetch address=$ip...
by raffav
Fri Mar 04, 2016 3:57 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

On RC16 if capsman is enable it make the cap to loop boot kernel error
by raffav
Wed Feb 17, 2016 7:53 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

any one have some idea how this will work
Perpetual is a lifetime license (buy once, use forever). It is possible to transfer a perpetual license to another CHR instanse.
by raffav
Wed Feb 17, 2016 7:08 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

maybe because the license is not 100% available for sell
and i think that for the trial time for now was supposed to able renew it