Community discussions

MikroTik App

Search found 41 matches

by razortas
Mon Oct 11, 2021 5:41 am
Forum: Announcements
Topic: v6.48.5 [long-term] is released!
Replies: 71
Views: 12447

Re: v6.48.5 [long-term] is released!

Ok so Files upgraded as expected but when i upgraded the routerboard version on two devices RB2011 access to devices was lost. Device is booting with ether boot displayed - have so far been unsucessful in factory reset and therfore cant use Netinstall iether. They both appear to be bricked.
by razortas
Fri Dec 18, 2020 1:02 am
Forum: General
Topic: PPPoE Clients Disconnecting on any change
Replies: 0
Views: 269

PPPoE Clients Disconnecting on any change

HI, I know this post has been around the traps already but in my situation i can not find a solution to this problem. Upgraded to 6.46.8 did not solve issue. Issue is that i have a PPPoE server where if any changes to any of the bridge clients is made ie client goes down then all of the PPPoE connec...
by razortas
Mon Nov 25, 2019 5:43 am
Forum: Beginner Basics
Topic: New Hap AC2, no internet
Replies: 4
Views: 1587

Re: New Hap AC2, no internet

You have your local ip 192.168.1.1 on ether2 yet you are doing DHCP on Bridge
by razortas
Wed Nov 13, 2019 1:50 am
Forum: General
Topic: IPsec IKE2 can find valid sertificate [SOLVED]
Replies: 13
Views: 5621

Re: IPsec IKE2 can find valid sertificate [SOLVED]

Does this still work ???? I have followed the wiki to the letter, i have imported both ca and client certs (client.crt) and Client.pkcs12 to the local computer Trusted Root Certtification store - and i still get Cant connect to IKE failed to find Valid machine cerificate. Error ? Also on my Windows ...
by razortas
Mon Nov 11, 2019 2:00 am
Forum: Useful user articles
Topic: L2TP VPN using Different IP range
Replies: 1
Views: 3706

L2TP VPN using Different IP range

Hi, I have L2TP VPN configured with different IP range for the VPN clients - NAT'd to local range. And Filters to allow traffic between ranges. Local Range 192.168.0.0/24 - VPN Pool 192.168.100.0/24. I can ping from client to internal servers and vice versa, I can connect Radius to the local Network...
by razortas
Tue Feb 05, 2019 6:03 am
Forum: Beginner Basics
Topic: dhcp - dns problem
Replies: 7
Views: 3615

Re: dhcp - dns problem

Hi, Do you have External DNS server listed under IP-DNS on 88.1 and allow remote requests enabled.
by razortas
Tue Feb 05, 2019 5:57 am
Forum: Beginner Basics
Topic: 2 Fiber Lines Split depending on IP address
Replies: 2
Views: 571

Re: 2 Fiber Lines Split depending on IP address

You need to read up on dual-gateways and traffic marking/routing to get this to work.
Basically you will need to identify the types of traffic or interfaces you want to go to which gateway (isp ip address).
by razortas
Tue Feb 05, 2019 5:47 am
Forum: Beginner Basics
Topic: Redirecting Static IPs please help!
Replies: 2
Views: 564

Re: Redirecting Static IPs please help!

Hi, You have two options you can turn off port 80 web in IP services or you can dst-nat using ports other than 80.
I would suggest if you still want access to router via web then change the web port in ip services.
by razortas
Wed May 30, 2018 4:59 am
Forum: General
Topic: Mikrotik OVPN server and PFSENSE clients
Replies: 0
Views: 521

Mikrotik OVPN server and PFSENSE clients

HELP REQUIRED !!!!!!! - Is this possible ? I have a need to replace a pfsense OVPN server with a mikroitk RB3011 however the current clients are also pfsense boxes. I need to be able to setup an ovpn server to communicate with the existing pfsense boxes. All attemtps so far have failed. I can setup ...
by razortas
Mon May 14, 2018 8:31 am
Forum: Beginner Basics
Topic: Accessing an IP from VLAN to a network where Mikrotik is only another DHCP client
Replies: 1
Views: 494

Re: Accessing an IP from VLAN to a network where Mikrotik is only another DHCP client

Are you nating or routing from 192.168.2.20 or is it just authentication One thing you can do is create a mangle rule identifying 192.168.1.0/24 port 80 traffic - mark it as guest and then put in a NAT rule dst-nat - packet mark-guest action=dst-nat 192.168.2.20. this means all port 80 traffic from ...
by razortas
Thu May 10, 2018 8:28 am
Forum: Beginner Basics
Topic: DHCP over EoIP
Replies: 2
Views: 1033

Re: DHCP over EoIP

Hi, Looking at your Basic diagram it would appear that you intend to create a flat layer 2 network between sites using eoip. For this to work you will have to bridge both ends ethernet and eoip tunnells.
If this is not the case a more detailed diagram would assist.
by razortas
Mon May 07, 2018 5:59 am
Forum: Beginner Basics
Topic: telnet to internal device
Replies: 3
Views: 968

Re: telnet to internal device

Hi, try changing the external port your connecting on and refering to in DST_NAT as the source port. Also check that ip services has port 23 disabled.
by razortas
Thu Nov 02, 2017 2:30 am
Forum: Scripting
Topic: Simple Queue Script using Variables
Replies: 2
Views: 8617

Re: Simple Queue Script using Variables

Thanks Guys,
I worked it out - it was just a matter of getting the syntax right!

/queue simple
add name=$QueueName queue=default/default target=$InterfaceName max-limit=(($DownloadSpeedK * 105 / 100)."k/".($UploadSpeedK * 105 / 100)."k")
by razortas
Tue Oct 31, 2017 4:51 am
Forum: Scripting
Topic: Simple Queue Script using Variables
Replies: 2
Views: 8617

Simple Queue Script using Variables

I wish to be able use a script to create simple queues and child queues using variables defined in the script -- means i don't have to change the script only the variables. At present i can create the parent via script however the max-limit= and limit-at will not accept upload/download variables. it...
by razortas
Wed Mar 15, 2017 5:16 am
Forum: Wireless Networking
Topic: mAP Lite in Repeater mode
Replies: 18
Views: 17479

Re: mAP Lite in Repeater mode

Hi, I am very interested in what version you are using for this, you said latest but i am now running 6.36.3 on recently purchased map-lite and those menu items to setup repeater etc are not visible and or missing ? So is this possible still ??
by razortas
Mon Nov 14, 2016 1:47 am
Forum: General
Topic: IP ALLOCATION USING HOTSPOT
Replies: 1
Views: 529

Re: IP ALLOCATION USING HOTSPOT

You have the function of next pool in your ip pool configuration, once all ips are used from first pool it will assign from next pool ! and so on.
by razortas
Mon Nov 14, 2016 1:35 am
Forum: General
Topic: Hotspot in other subnet
Replies: 1
Views: 576

Re: Hotspot in other subnet

Include some IP addressing would be nice ?
Where is your dhcp server ?
Is the interface connecting the mik to the switch have a Lan address /
Can the LAN clients ping the interface of the Mik.
What else is happening on the cisco switch ?
by razortas
Mon Nov 14, 2016 1:19 am
Forum: General
Topic: HOTSPOT - DNS - DHCP (LOGIN.HTML) ISSUE
Replies: 0
Views: 448

HOTSPOT - DNS - DHCP (LOGIN.HTML) ISSUE

Hi after some input into why it works this way: I have a working hotspot at a client site, however client has informed me that by increasing her internet bandwidth the login.html page appears to the user faster. The only reason i can think of for this happening is perhaps DNS is being resolved outsi...
by razortas
Mon Oct 24, 2016 8:23 am
Forum: Beginner Basics
Topic: Wireless Mesh
Replies: 3
Views: 1070

Re: Wireless Mesh

All ports need to be on the hotspot bridge 2-10, Setup static IP's within range on bridged/APs for management.
Setup Wireless Mesh using AP's - Bridge APs Wlan and Ether with default route to ether.
by razortas
Wed Oct 19, 2016 3:48 am
Forum: General
Topic: 2 families, 2 ISPs and a shared network printer
Replies: 10
Views: 2562

Re: 2 families, 2 ISPs and a shared network printer

Not sure what version your using but action=route - confusing ? Here is my suggestion: /interface ethernet set [ find default-name=ether1 ] name=Port1_LAN1 set [ find default-name=ether2 ] name=Port2_WAN1 set [ find default-name=ether3 ] name=Port3_LAN2 set [ find default-name=ether4 ] name=Port4_WA...
by razortas
Wed Oct 19, 2016 12:53 am
Forum: General
Topic: bandwidth limit per packet mark
Replies: 2
Views: 771

Re: bandwidth limit per packet mark

Hi,
Please explain how you are identifying your three companies if you only have one LAN. Can you include printout of mangle rules ?
by razortas
Wed Aug 24, 2016 7:03 am
Forum: Beginner Basics
Topic: Help on my RB2011uias-2hnd-in configuration
Replies: 1
Views: 595

Re: Help on my RB2011uias-2hnd-in configuration

First you have to identify and classify the different types of traffic using mangle rule and mark packet or connections based on that criteria. You can also depend on interface as your criteria. Then you setup queue-tree for each outgoing interface, and or incoming traffic using the packet marks/con...
by razortas
Wed Aug 24, 2016 6:28 am
Forum: Beginner Basics
Topic: RB951UI-2HND with two Internet(WAN) connections
Replies: 4
Views: 3287

Re: RB951UI-2HND with two Internet(WAN) connections

www.mikrotik.com/wiki - You have 5 ethernet ports - any of them can be used for any type of connection.
by razortas
Wed Aug 24, 2016 5:27 am
Forum: General
Topic: Feature-Request - InterfaceList in Queue-Tree
Replies: 3
Views: 1393

Re: Feature-Request - InterfaceList in Queue-Tree

Thanks ZeroByte ..... still however confusing the use of Global ? Would you be able to exemplify the different use of global vs interface as parent. Lookin at QOS i currently mark traffic based on DSCP. I Have multiple queues with different criteria currently with parent based on interface outbound,...
by razortas
Wed Aug 10, 2016 3:15 am
Forum: General
Topic: Feature-Request - InterfaceList in Queue-Tree
Replies: 3
Views: 1393

Feature-Request - InterfaceList in Queue-Tree

Now that we are able to create interface lists for use in firewall, would it be possible to use interface list as parent in queuu-tree ?
by razortas
Wed Jul 06, 2016 8:07 am
Forum: General
Topic: [SOLVED] DHCP over a wireless bridge link
Replies: 2
Views: 3621

Re: DHCP over a wireless bridge link

I think you nailed it already - Use station-bridge mode on M2
by razortas
Thu May 26, 2016 2:56 am
Forum: General
Topic: IPSSEC setup on EOIP tunnel
Replies: 1
Views: 548

IPSSEC setup on EOIP tunnel

Need understanding: Using V6.30.4 to implement ipsec on eoip tunnel. Setup is src/dst address and ipsec password. Tunnel and dynamic policy is added, change default proposal to aes-256-cbc only. When apply at both ends getting remote peer as initiator and responder. Also on peer tab peer listed as s...
by razortas
Thu Oct 08, 2015 2:32 am
Forum: Beginner Basics
Topic: VRRP interfaces disappeared
Replies: 0
Views: 484

VRRP interfaces disappeared

Had all the VRRP interfaces dissapear on one of the two GW's. Know how to fix, but was wondering if anyone had any ideas on how this could happen ? Unit was being accessed via mac telnet at time, but have tried to replicate command that could effect without simililar result. :D
by razortas
Tue Feb 10, 2015 4:41 am
Forum: General
Topic: IPSec Policy creation issue
Replies: 2
Views: 994

Re: IPSec Policy creation issue

having exact same issue -- appears to be BUG :?
by razortas
Thu Nov 13, 2014 12:15 am
Forum: General
Topic: SSH Error
Replies: 2
Views: 1201

Re: SSH Error

This is using 6.20 i wouldn't call it an old version, and we are using this version because it has been proven to run qos correctly.
by razortas
Wed Nov 12, 2014 7:24 am
Forum: General
Topic: SSH Error
Replies: 2
Views: 1201

SSH Error

Attempting to SSH to "extreme switch" failing with following result: Anyone have any ideas or details on how to connect to "exreme switch" ?



[admin@DC3_rtr1] /system> ssh user=admin
address: 192.168.20.20
password:
unable to open channel: 4
Channel open failed

Welcome back!
by razortas
Thu Nov 06, 2014 2:32 am
Forum: General
Topic: CRS125-Simple lab - Documentation
Replies: 5
Views: 2101

Re: CRS125-Simple lab - Documentation

So ok its working at present because i put the vlan 88 tagged on the ports of the extreme switch. Issue here is that as per scenario above customer vlans are not known therefore cannot put them on the crs config. Is there a way to use a CRS switch where the incoming packets from backhaul are tagged ...
by razortas
Thu Nov 06, 2014 12:38 am
Forum: General
Topic: CRS125-Simple lab - Documentation
Replies: 5
Views: 2101

Re: CRS125-Simple lab - Documentation

Thanks again Mikrotik Support, Realized that you guys know what your talking about and that the problem would obviously be related to the other parts of the lab.
Its now working using your commands. i needed to add the vlan tagged to the outfacing interface of the ex440 switch.
by razortas
Thu Nov 06, 2014 12:11 am
Forum: General
Topic: CRS125-Simple lab - Documentation
Replies: 5
Views: 2101

Re: CRS125-Simple lab - Documentation

Thanks support for answering, Tried that config probably days ago didnt work. Reset configuration carried out, setup switch from terminal with only your commands - it still does not work.
by razortas
Wed Nov 05, 2014 6:55 am
Forum: General
Topic: CRS125-Simple lab - Documentation
Replies: 5
Views: 2101

CRS125-Simple lab - Documentation

Ok so i am attempting to setup a simple lab to test operability with extreme switch. Documentation crs.example.wiki information doesnt appear to reflect the menu items available in switch menu using version 6.20. Lab is setup as per picture, can anyone help out with correct config. Have been able to...
by razortas
Wed Jun 18, 2014 4:52 am
Forum: General
Topic: Need to make 1 router work like 2, is this possible?
Replies: 2
Views: 943

Re: Need to make 1 router work like 2, is this possible?

Havnt tried this but my thoughts are: If the ISP is using DHCP to give you a connection then that ip would be a different network address to the one hes asking you to use for your public ip (different networks). Therefore i wouldnt be using a seperate NIC for the two networks, you can put both publi...
by razortas
Thu Jun 05, 2014 7:15 am
Forum: Beginner Basics
Topic: Open Wifi AP for restaurant but redirect to FOOD MENU first
Replies: 5
Views: 2374

Re: Open Wifi AP for restaurant but redirect to FOOD MENU fi

Did you get this working ? What you had to do was edit the alogin.htm page, remove the redirect instruction and place the url for the menu instead. Alternatively you can use the advertise feature within the user profile to temporarily display a page. 8)
by razortas
Thu May 08, 2014 3:19 am
Forum: Beginner Basics
Topic: Open Wifi AP for restaurant but redirect to FOOD MENU first
Replies: 5
Views: 2374

Re: Open Wifi AP for restaurant but redirect to FOOD MENU fi

Understand where your coming from but you appear to be confusing functionality with the user experience. You can setup a Hotspot using trial user where the username and password are passed in automatically and then directed to a URL. The customer connects to the wifi network and gets the menu page o...
by razortas
Tue Dec 03, 2013 6:36 am
Forum: Wireless Networking
Topic: Maximum Hotspot Users Anyone
Replies: 4
Views: 6550

Maximum Hotspot Users Anyone

Few questions have been asked about how many users for particular scenario in forums never appear to be answered. So Who out there is actually using a hotspot, Whats the max number of connections you have every had on a single RB simultaneously and what RB's did you use. Maybe someone can compile a ...
by razortas
Fri Sep 27, 2013 5:06 am
Forum: General
Topic: Free HOTSPOT Login
Replies: 3
Views: 8245

Free HOTSPOT Login

I have setup a hotspot that the public can access free with username and password passed in the html page (hidden). I have also edited the login.html page to represent a user agreement and changed the login promtp at the bottom to be an i agree statement. All works fine when using a laptop and the u...
by razortas
Tue Nov 20, 2012 1:14 am
Forum: The User Manager
Topic: Radius server not responding after upgrade
Replies: 2
Views: 2643

Re: Radius server not responding after upgrade

Hey, Did you ever resolve this issue yourself, i have exactly the same issue on a newly setup wifi mesh with hotspot using user manager and radius on the same box. Setup as per wiki and all i get is the radius server not reponding allthough if you look at the radius log you can see requests coming i...