+1 for this feature

Scripting all pppoe hubs with all prefix list is being a hustle.

I'm unable to establish OSPFv3 between two routers. 09:47:41 route,ospf,info Discarding packet: src address is not link-local 09:47:41 route,ospf,info source=2a0a:e780:xxxx From what I can find issue is with local link address on second router. http://149.5.41.2/link-local.png Vlan configuration: ht...

+1

All hacks are not working with BGP.
IP address assigned by ISP end up with .255/31, I'm getting BGP routes - but marked as inactive.
Solution?

HI All, After great presentation made by Lorenzo Busatti (Grifonline S.r.l., Italy) I have decided to establish BGP peer with blackhole server with my upstream provider - Cogen. I made configuration based on their information and now peer is connecting only for milliseconds. 07:27:03 route,bgp,info ...

+1

Hi, I have the same issue - I have created vlan on 6.12 and after some time it was missing. Reported to support ticket number: 2014050166000161 CCR1016-12G Strange vlan issue. Added vlan 1286 on ether12 via winbox. Close winbox, reopen, vlan now missing. Under vlans tab in interfaces setup, there is...

+1 - with 20 peers it is really needed

Hi, I'm struggling with that in our network for about a year. We have changed most of devices to nmba mode - but route propagation was taking too long. We can observe that issue on CCR's working versions 6.7,6.10, 1100AHx2 ver 6.7 and almost on all other devices with OSPF. We where thinking the issu...

Lately we had some issues with 6.6 packages.
We where uploading routeros-mipsbe-6.6.npk file, but after reboot most of the packages was missing - only system package was installed.
In log files we had error that verification of package was unsuccessful.

Any updates on that subject?

Regards