Community discussions

Search found 101 matches

by Basiley
Fri Apr 19, 2013 1:37 am
Forum: General
Topic: DNSCurve ? SEND ? arpwatch?
Replies: 0
Views: 499

DNSCurve ? SEND ? arpwatch?

there already mentioned before[arpwatch about 4 yrs long], but nothing changed, seems. i understand developers/engineers had quite tight/hard timeline, but that's quite handy/critical features in terms of security. to avoid contusion those abbreviates meant, respectively: https://www.isc.org/communi...
by Basiley
Fri Apr 19, 2013 1:30 am
Forum: RouterBOARD hardware
Topic: Wishlist for RB2011UAS-2HnD-IN
Replies: 14
Views: 4650

Re: Wishlist for RB2011UAS-2HnD-IN

i upgrade to 6.0 rc6 and that's right. the led blinking when port have traffic.
basically i dreaming about able to config leds.
or turn them off, atleast :[
because those LED's quite BRIGHT for housing/premises. for work its quite Cool, sure.
by Basiley
Fri Apr 19, 2013 1:14 am
Forum: RouterBOARD hardware
Topic: What is more powerful rb2011 or rb450g?
Replies: 18
Views: 7666

Re: What is more powerful rb2011 or rb450g?

but sometimes 2x more RAM helps RB450g a bit ;=)
btw, what best stable clocks for 2011UAS "in general" ?
anyone experimenting with stock setup ?[no extra radiator/fan, no powe system update].
by Basiley
Fri Apr 19, 2013 1:02 am
Forum: RouterBOARD hardware
Topic: mipsbe boards only allow max MTU of 1520???
Replies: 5
Views: 1981

Re: mipsbe boards only allow max MTU of 1520???

well, most RB's/switches support Jumbo frames for 1GBE up to 9k MTU.
not sure about "large send" feature, support :/
by Basiley
Thu Mar 07, 2013 9:12 pm
Forum: General
Topic: stuck package after update to 6rc
Replies: 3
Views: 1256

Re: stuck package after update to 6rc

I don't quite understand the meaning of this post, you can uninstall LCD package even if you installed upgrade with big package. What is the problem exactly? LCD package removal actually resolve generally inconsistent/weird RB2011 behavior. hard to explain. 2011 just behave, like networking hardwar...
by Basiley
Tue Mar 05, 2013 10:43 pm
Forum: RouterBOARD hardware
Topic: Dead RB2011-RM after upgrade to 5.24
Replies: 13
Views: 4879

Re: Dead RB2011-RM after upgrade to 5.24

It should be nice to know wich is the best firmware (routerboard firmware) for the 2011. I have ordered new boards and I dont want to destroy them. Here RMA is more expensive than buying new ones. probably would make sense to wait for Final 6.0 RouterOS and use 5.22 until. my 2011 fine with rc11 ba...
by Basiley
Tue Mar 05, 2013 10:39 pm
Forum: General
Topic: stuck package after update to 6rc
Replies: 3
Views: 1256

stuck package after update to 6rc

my 2011UAS shipped with 5.22 ROS initially. after i update RO/loader as suggested noticed weird[for ROS] issues. resolved after i manually remove [redundant/unnecessary]package, named "lcd". seems 2011 use main["system" ?]package to manage LCD, so anything unused can be safely purged/disabled. no we...
by Basiley
Tue Mar 05, 2013 7:34 pm
Forum: General
Topic: Feature Request - nDPI package for Cloud Core Router
Replies: 12
Views: 4197

Re: Feature Request - nDPI package for Cloud Core Router

but it heavier.
sadly
by Basiley
Tue Mar 05, 2013 6:11 am
Forum: RouterBOARD hardware
Topic: Mikrotik 10GbE when?
Replies: 8
Views: 4595

Re: Mikrotik 10GbE when?

presently both chipsets and CPU bus-es[and lack[PCI-e didn't count 4 that] of such in iNtel CPU case]unable to handle and severely bottleneck performance.
in fact, motherboards with firmware WITHOUT bus-es flood/overload protection can hang with appropriate message on screen :[
by Basiley
Tue Mar 05, 2013 6:02 am
Forum: General
Topic: Router OS support Nforce Chipset?
Replies: 3
Views: 736

Re: Router OS support Nforce Chipset?

minor issues, like bogus/broken MSI.
otherwise anything working, contrary to intel[for example, both HPTE and APIC working].
by Basiley
Tue Mar 05, 2013 6:00 am
Forum: General
Topic: IDS snort
Replies: 8
Views: 6287

Re: IDS snort

mean common sense and "understanding IP networking" (c). but plenty of "copy-paste examples" floating around Web. for example this one http://klseet.com/index.php/mikrotik/mikrotik-rb750-750g/mikrotik-rb750-basicfirewallsecurity kinda missed something like that in default in userfriendly state, with...
by Basiley
Mon Mar 04, 2013 6:30 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM - better POE 24V or DC power ?
Replies: 4
Views: 1722

Re: RB2011UAS-RM - better POE 24V or DC power ?

check/google pictures of both PSU's shematics/pcb and discussions. basically[usually] from same price range, PSU's comparable. for little "extra" in terms of reliability you need to purchase something off-the-league[at cost of RB or so]. point is, for RB price/purposes, supplied PSU quite good ! jus...
by Basiley
Mon Mar 04, 2013 6:25 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD devices + SFP
Replies: 10
Views: 1942

Re: RouterBOARD devices + SFP

its question bang/buck ratio of RB's, then ;) two/tripple-band radios more expensive and as long as MT stick with Atheros SoC, there wasn't one inexpensive/cold one designed/produced, yet[guess, until TSMC switch to 28nm/16nm or something]. there many things customers [tend to]request, virtually any...
by Basiley
Mon Mar 04, 2013 6:17 pm
Forum: RouterBOARD hardware
Topic: Hardware for ISP - quality of RB
Replies: 5
Views: 1533

Re: Hardware for ISP - quality of RB

basically RB cheap enough to "pick/buy a new after fault/failed/downed one" in case of HW issues/KIA. RB presently not supply carrier-grade HW, except CCR, maybe[or extremely cute and reliable outdoor Wi-Fi stuff :]. all RB's i knew works perfectly on up-to-mid-sized ISP's[in custom-built racks, usu...
by Basiley
Mon Mar 04, 2013 6:08 pm
Forum: RouterBOARD hardware
Topic: Dead RB2011-RM after upgrade to 5.24
Replies: 13
Views: 4879

Re: Dead RB2011-RM after upgrade to 5.24

weird. try netboot. both for update or recover from attempts of it. booting from backup loader for netboot, of course. presently had only problems with fragmentation/reassembly of traffic[when most interfaces had different MTU/MRU basically]. aside lack of CPU power[to unleash ROS potential], focus ...
by Basiley
Fri Feb 01, 2013 6:32 am
Forum: Beginner Basics
Topic: Set ETH2 as WAN port
Replies: 6
Views: 1177

Re: Set ETH2 as WAN port

1. properly bring "WAN"/Eth2 port L2 configuration. then set up static ip or bing up DHCP Client or DHCP server for it.
2. bring up routing. bring up masquerading[if necessarily].
3. set-up firewall.
by Basiley
Mon Jan 14, 2013 1:11 pm
Forum: General
Topic: OVPN on new versoins ROS 6.0 and 5.1...
Replies: 61
Views: 19756

Re: OVPN on new versoins ROS 6.0 and 5.1...

full-caps OVPN support in ROS could b nice even for home consumers[access to home network, check home, kids, pets, flowers], let alone corporate/job needs.
what else 4 that ? PPTP ? pff.... IPSec over L2TP ? hm. SSTP ? even less interesting.
by Basiley
Mon Jan 14, 2013 1:00 pm
Forum: RouterBOARD hardware
Topic: RB751/2011UAS - TX-Power beginner question
Replies: 3
Views: 1014

Re: RB751/2011UAS - TX-Power beginner question

EMI happen. especially if TRX near acoustic systems.
got similar issues with my radios, AC and headphones from 3 from 4 of my cellphones, during incoming calls, sms or BS service[same was done by SW TRX, CB[11m and 70cm] WT].
by Basiley
Sat Jan 12, 2013 12:11 pm
Forum: RouterBOARD hardware
Topic: Wishlist for RB2011UAS-2HnD-IN
Replies: 14
Views: 4650

Re: Wishlist for RB2011UAS-2HnD-IN

in my priority/charts: 1. four-core 800Mhz[1GHz ? even better!] CPU. 2. 512Mb RAM[or SO-DIMM slot]. 3. SEND[NDP replacement] for both v4 and v6. 4. DNSCurve[DNSSec replacement] 5. two emerging NAT's for v6, starting from NAPT. and NAT-T for v4. 6. native I2P and GNUNet support. 7. dual-band 2x2 Wi-F...
by Basiley
Sat Jan 12, 2013 12:02 pm
Forum: General
Topic: IP conflict detection for ROSv6
Replies: 2
Views: 1339

Re: IP conflict detection for ROSv6

ebtables+arpwatch&some built-in triggers ? :)
by Basiley
Fri Jan 11, 2013 6:43 am
Forum: RouterBOARD hardware
Topic: RB2011L incompatible with SMC switches?
Replies: 8
Views: 2989

Re: RB2011L incompatible with SMC switches?

probably L1 derrivation from standard.
saw such struggle between 3Com and Intel switches in past. and HP rejecting D-Link ;)
check switch phy/trx datasheet in SMC and send report/request to vendor.
by Basiley
Fri Jan 11, 2013 6:33 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1017198

Re: CLOUD CORE ROUTER

I am about to order one but I had question about port/cpu. The router I am contemplating replacing currently only has ports in use. Wan/Lan, the lan port terminates 20 or so vlans in the building (router on a stick type config) with 1 vlan going to ospf distribution routers for other buildings. Fro...
by Basiley
Fri Jan 11, 2013 6:27 am
Forum: General
Topic: v6 rc6 released
Replies: 215
Views: 62691

Re: v6 rc6 released

I'm running a CCR in production. VMWare hosting. It's rebooted once in 10 days. Apart from that it's been solid. Most of the reported bugs are on features I'm not using. thats why i tend to purge unused packages from my RB's. for particular case its calea[LI implemented differently in my country an...
by Basiley
Fri Jan 11, 2013 5:57 am
Forum: RouterBOARD hardware
Topic: RB2011UAS-2HnD-IN unresponsive/defect touch-LCD
Replies: 27
Views: 11970

Re: RB2011UAS-2HnD-IN unresponsive/defect touch-LCD

not tried RC6 yet, but in rc6 it won't work completely okay even after series of calibrations. for example - inpredictible touch sensetivity feats[regardless accuracy/pressure], ignore settings from LCD portion of settings[from CLI], randomly shuffling slideshow on random interface, ignore "backligh...
by Basiley
Fri Jan 11, 2013 5:52 am
Forum: General
Topic: Feature request: PON (passive optical network)
Replies: 6
Views: 3236

Re: Feature request: PON (passive optical network)

generally cause xPON downstream is encrypted[which mean some stress on CPU/SoC] most NW HW vendors tend to evade native support thus[to save tiny/outdated SoC in production/products to maximize profit], i suppose. generally GEM protocol used in one standard and ATM or EoIP[IPoE ?] in another. genera...
by Basiley
Fri Jan 11, 2013 5:45 am
Forum: RouterBOARD hardware
Topic: Which RB? 40 users, dual wan 20/20 and 10/5
Replies: 5
Views: 1795

Re: Which RB? 40 users, dual wan 20/20 and 10/5

Yes, dhcp and dns proxy. Some users p2p,maybe 5 max. Vpn maybe 5max. so, no insane pps amount ? then even 2011UAS could be handy. generally more connections/smaller packets - more memory/more CPU necessarily. that's why i love upgradeable RAM options in some routers[just plug 8x bigger SO-DIMM modu...
by Basiley
Fri Jan 11, 2013 5:38 am
Forum: Beginner Basics
Topic: fighting ISP, tampering DNS TTL
Replies: 4
Views: 2383

Re: fighting ISP, tampering DNS TTL

dunno why. doesn't ROS use same Linux kernel and netfilter as "usual" Linux had ?[which perfectly can do that]. another question - why both DNS and Routing setting marginalised/generalised/global ? ie why you can't setup DNS client and DNS server separately[just like how you threat DHCP, PPPOE or Op...
by Basiley
Fri Jan 11, 2013 5:33 am
Forum: Beginner Basics
Topic: RB2011UAS-2HnD-IN "Default Client Tx Rate" not working
Replies: 4
Views: 2547

Re: RB2011UAS-2HnD-IN "Default Client Tx Rate" not working

i guess you would try setup queries, rather than throtthing interface globally, except in case heavvy pressure ;)
by Basiley
Fri Jan 11, 2013 5:26 am
Forum: General
Topic: v6 rc6 released
Replies: 215
Views: 62691

Re: v6 rc6 released

in RC6 - LCD worked in 2011UAS-xxxxx-IN without any efforts !! just like it "should be". any feats from wiki/advertisements - works from single touch at lightspeed ! I'm afraid to do new updates after this RC6 with DHCP buggy because my clients were furious to stay one day without internet. you MUST...
by Basiley
Fri Jan 11, 2013 5:19 am
Forum: Wireless Networking
Topic: 802.11ac
Replies: 51
Views: 29495

Re: 802.11ac

Ah, that makes MUCH more sense :) 60Ghz isn't so bad for short hops. Current EIRP is 40dBm and 500mW radio. There is a proposal in the FCC to take this to 82dBm EIRP when the antennas is >=51dBi. The curious thing to me about 'ad' is that it is simultaneous tri-band of 2.4,5,60Ghz. For WISP service...
by Basiley
Fri Jan 11, 2013 5:16 am
Forum: RouterBOARD hardware
Topic: RB450 Capacitors problem?
Replies: 120
Views: 42087

Re: RB450 Capacitors problem?

try instlall solid state caps instead.
preferably - not oxide caps with polymer dielectric, but tantal, palladium caps and etc kinda expensive stuff.
but thats about [amount of]money[you want invest into improving/modding you unit/router].
by Basiley
Fri Jan 11, 2013 5:13 am
Forum: RouterBOARD hardware
Topic: RB2011 Internal PSU
Replies: 1
Views: 1067

Re: RB2011 Internal PSU

I see the case for the RB2011 has provision for an IEC socket at the rear, and mounting to take an internal power supply. A 48v power pack with an IEC socket on a flylead would do the job. Are these available anywhere ? This would make it a "proper" rack mount solution. :idea: could be nice for RM ...
by Basiley
Fri Jan 11, 2013 5:11 am
Forum: RouterBOARD hardware
Topic: RB2011UAS-2HnD-IN Questions Topic
Replies: 215
Views: 92807

Re: RB2011UAS-2HnD-IN Questions Topic

start question again. explain what exactly you want to succeed Actually, I believe his question is pretty clear? I checked on my RB2011UAS-2HnD-IN and mind you that I am using different antenna's (Using an Aruba kit with dual polarity omni's). I see some difference, but not so much as you are seeyi...
by Basiley
Sun Dec 16, 2012 7:56 pm
Forum: RouterBOARD hardware
Topic: Can be RB800 with SFP port...
Replies: 14
Views: 2711

Re: Can be RB800 with SFP port...

hardly both Tilera and PPC chips can be anyway "silently cooled", sadly, due to amount of heat/energy disspation/consumtion. [100-core Tilera spec'ed at 55W :[ maybe when 28nm chips or 14nm ? basically thats why both Phillips and Freescale shifted from PPC in embedded. don't worry mild[not 16/32-64/...
by Basiley
Sun Dec 16, 2012 3:10 pm
Forum: RouterBOARD hardware
Topic: Which RB? 40 users, dual wan 20/20 and 10/5
Replies: 5
Views: 1795

Re: Which RB? 40 users, dual wan 20/20 and 10/5

both 450g and 2011UAS could do the trick. [40/26 Mbps even on small packets] 800/1200 quite redundant/OP IMO. otherwise you should consider CCR, if you grow out of 450g/2011UAS. 800/1200 quite powerful routers, however, so if you can spend some more - its worth it. p.s. if most users are demanding[i...
by Basiley
Sun Dec 16, 2012 3:02 pm
Forum: Wireless Networking
Topic: Wireless link over the sea‏
Replies: 9
Views: 2751

Re: Wireless link over the sea‏

yeah, installing on bigger altitudes&adjusting antenna - helps.
saw farmer, using 11m pole to connect WiFi to ISP )
by Basiley
Sun Dec 16, 2012 2:53 pm
Forum: General
Topic: RB2011UAS-2HnD review
Replies: 3
Views: 1458

Re: RB2011UAS-2HnD review

Do you guys plan on making a "beefier" version of the RB2011? I was excited about that.. yeah, 2011 on 1074kf counterpart[multi-core]could be nice. but at times take to re-design it[not sure its fully pinout-compatible], Atheros/MT may already adopt Pro-Aptiv cores. also could be nice to see "cheap...
by Basiley
Sun Dec 16, 2012 1:30 pm
Forum: General
Topic: IPv6 Security?
Replies: 4
Views: 1428

Re: IPv6 Security?

by Basiley
Sun Dec 16, 2012 1:22 pm
Forum: RouterBOARD hardware
Topic: 2011 power cord retainer
Replies: 34
Views: 6466

Re: 2011 power cord retainer

probably simplicity of PCB design, ie reduce cost of both creation and manufacturing. for example, quite old 450g had TWO power sockets for this purpose. one was used for installation in standart encasing, another - for other applications. for similar reasons, i guess, 2011 was had interfaces around...
by Basiley
Sun Dec 16, 2012 1:12 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM Horrible front/label design!!!
Replies: 14
Views: 4564

Re: RB2011UAS-RM Horrible front/label design!!!

seems MikroTik was focused on Boards and Stations more presently more than cases for them as well as devoted fr RouterOS, powering them over Atheros chips. point is: you always can find/order something looking more solid/presentable/serious to encase you lovely cute RB board anew ;) presently i not ...
by Basiley
Sun Dec 16, 2012 1:05 pm
Forum: General
Topic: Mikrotik Christmas version
Replies: 15
Views: 4949

Re: Mikrotik Christmas version

:( what is the reason of my karma decrease on this topic? :shock: dunno. but significant portions of MikroTik consumers are Non-Christian[and very likely viewing this forum]. also some of them quite offensive[as typical for all Abrahamic religion, including Christianity itself, in past]agains other...
by Basiley
Sun Dec 16, 2012 11:05 am
Forum: General
Topic: Feature request: PON (passive optical network)
Replies: 6
Views: 3236

Re: Feature request: PON (passive optical network)

MT anounced that they didn't support passive optical interfaces and didn't have such plans yet and suggested to use integrated ONT or OLT SPF modules for this case/scenario and even pointed link to Youtube video on one ONT module[wasn't shipped yet].
by Basiley
Sun Dec 16, 2012 11:00 am
Forum: RouterBOARD hardware
Topic: rb2011 with dualcore CPU? to be comparable with ubnt edgerou
Replies: 1
Views: 884

Re: rb2011 with dualcore CPU? to be comparable with ubnt edg

yeah, would be nice to see variant with 1074 instead of 74[preferably with FPU]. ie from https://www.mips.com/products/processor-cores/classic/mips32-74k/ >>>to>>> https://www.mips.com/products/processor-cores/classic/mips32-1074k/ but likely by amount of time for changes, they already move to Pro A...
by Basiley
Sun Dec 16, 2012 10:55 am
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 438
Views: 308564

Re: Sample Hotspot Page - Sticky Please

both - cool.
but liked nick3dos variant little more :)
by Basiley
Sun Dec 16, 2012 10:50 am
Forum: Beginner Basics
Topic: Multiple PPPoE Gateways
Replies: 3
Views: 940

Re: Multiple PPPoE Gateways

Just wondering, would it be possible to setup using NAT (src address and out interface) instead of all the mangle/firewall combination?
altering "out interface"[to desired ppoe-client for each sub-net/port] only ?
would work, but suggested above solution - more secure.
by Basiley
Sun Dec 16, 2012 10:46 am
Forum: Beginner Basics
Topic: FROM BEGINNER TO EXPERT
Replies: 15
Views: 2670

Re: FROM BEGINNER TO EXPERT

beautiful )
by Basiley
Thu Dec 13, 2012 12:02 pm
Forum: Wireless Networking
Topic: Wireless link over the sea‏
Replies: 9
Views: 2751

Re: Wireless link over the sea‏

wow, thats quite HUGE distance for Wi-Fi :P i wish you luck in that. friends of mine triend to set-up such things and said was most hardest part was [laser-based]justification of narrow antennas. more expected to see 2m and 70cm traffic with extra/violating outputs and directional antennas. or ROS l...
by Basiley
Thu Dec 13, 2012 11:52 am
Forum: RouterBOARD hardware
Topic: RB2011 gigabit ethernet bridge only working at 10 Mbps
Replies: 1
Views: 2578

Re: RB2011 gigabit ethernet bridge only working at 10 Mbps

its works when you set it manually to 1GBps on both ends ? also stupid-looking/sounding guess about cable[but can be too, btw]: cable degradation[but over NOTABLE time]quite usual/eventual, ie plastic-made insulator - relatively short-living thing. check with different cable[new, shortest as possibl...
by Basiley
Thu Dec 13, 2012 11:25 am
Forum: RouterBOARD hardware
Topic: RB2011UAS-2HnD-IN + GPON not GePON
Replies: 10
Views: 6739

Re: RB2011UAS-2HnD-IN + GPON not GePON

This Huawei HPSP2120 is not going to work. RB2011 supports only Active Optical Networks. If you can get GPON ONU/ONT with integrated chip then it might work. There was only one manufacturer making those modules, but they were not in production yet. http://www.finisar.com/blogs/lightspeed/category/t...
by Basiley
Thu Dec 13, 2012 11:17 am
Forum: RouterBOARD hardware
Topic: CCR - good for me? mostly vpn
Replies: 11
Views: 4462

Re: CCR - good for me? mostly vpn

I would expect CCR to outperform any x86 system for VPN because of the greater number of powerful cores. It will probably handle more concurrent VPNs than a regular x86 server. generally 36-core model performing about 2Gbps on high-load/demanding customers/nodes[high number of tiny packets, high pp...
by Basiley
Thu Dec 13, 2012 11:11 am
Forum: General
Topic: x86 release to be 64 bit?
Replies: 14
Views: 7148

Re: x86 release to be 64 bit?

logically question is" Does Pro.Aptiv cores include 64-Bit chips from Atheros in future ?"
so its matter of time, i suppose.
hope not far in Atheros case[of Pro-Aptiv adoption].
by Basiley
Thu Dec 13, 2012 11:07 am
Forum: General
Topic: IPv6 flood_router6 attack - Router advertisement Guard
Replies: 3
Views: 2530

Re: IPv6 flood_router6 attack - Router advertisement Guard

generally its why and what for SEND are creating as NDP replacement.
hardly possible to fix/protect "insecure by design" things.
by Basiley
Thu Dec 13, 2012 11:04 am
Forum: Wireless Networking
Topic: 802.11ac
Replies: 51
Views: 29495

Re: 802.11ac

cool. how about 802.3ad chips too in RB then ? they complimentary for ac[just 60GHz derrivative], if im read specs/standard well/correct. its not something bogus/narrrow-demanded, like 802.22 =) or widely used but irrelevant yet[like ZigBee]to networking -) 802.3ad doesn't requre radio support and ...
by Basiley
Thu Dec 13, 2012 10:58 am
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM Horrible front/label design!!!
Replies: 14
Views: 4564

Re: RB2011UAS-RM Horrible front/label design!!!

but its perform quite nice, btw. especially for price. thickness/grade of metall of course wasn't prefect, but it as you stated, inexpensive[and affordable by many, aside you]and provide good airflow. UAS-2NhD-In i purchased, instead of UAS-RM, initially, because WiFi presence[marginally, but need:[...
by Basiley
Wed Dec 12, 2012 4:59 pm
Forum: General
Topic: v6 rc5 released
Replies: 112
Views: 35296

Re: v6 rc5 released

from [relatively]small things - dreaming about NAT-T support. also better handling PMP.
by Basiley
Wed Dec 12, 2012 4:42 pm
Forum: RouterBOARD hardware
Topic: 2011 power cord retainer
Replies: 34
Views: 6466

Re: 2011 power cord retainer

armes Deutschland wegen solcher Leute wie dir seid ihr genau da wo ihr heute seid Hat dir nie einer beigebracht, dass wenn sich Erwachsene unterhalten, kleine Kinder den Mund halten und nicht einfach ungefragt dazwischen babbeln? Geh zurueck in die Sandkiste aus der du gekrochen bist und spiel weit...
by Basiley
Wed Dec 12, 2012 4:36 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-2HnD-IN + GPON not GePON
Replies: 10
Views: 6739

Re: RB2011UAS-2HnD-IN + GPON not GePON

Hello, I buy one transceiver Huawei HPSP2120, for GPON configuration. Power of the router, install the Gpon transceiver, power up the RB2011UAS-2HnD-IN...does not start. There is any incompatibility between the two devices. :? did you sure you get CORRECT SFP ? ie proper band for transmit and recei...
by Basiley
Wed Dec 12, 2012 4:08 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74290

Re: RB751U-2Hn frequent (daily) reboots

i guess heavy p2p wasn't good for routers w/o FPU. and otherwise stressful cases. moderate overclocking[before replace to 1200] orimproving heatsink/cooler could ease it a bit. also 64Mb and 128Mb is quite small for routers with significant portions of traffic with p2p and/or HUGE bandwith[recently ...
by Basiley
Wed Dec 12, 2012 3:50 pm
Forum: General
Topic: low connection speed on ZTE 821
Replies: 3
Views: 1544

Re: low connection speed on ZTE 821

ideally attempt without such "active USB Hub" could be nice 2 be sure its not bottleneck.
no offense.
by Basiley
Wed Dec 12, 2012 3:41 pm
Forum: General
Topic: IPv6 Security?
Replies: 4
Views: 1428

Re: IPv6 Security?

all vendors not devoted to IPv6 at all. generally when native IPv6 adoption increase, things change, i suppose[and vice versa]. basically im more concerned about lack of SEND support[or improved/fixed IPSec crypto/auth], rather than lack of RAG. friends report about RIPng as working in ROS, btw. hop...
by Basiley
Tue Dec 11, 2012 9:39 pm
Forum: Wireless Networking
Topic: 802.11ac
Replies: 51
Views: 29495

Re: 802.11ac

cool. how about 802.11ad chips too in RB then ? they complimentary for ac[just 60GHz derrivative], if im read specs/standard well/correct.
its not something bogus/narrrow-demanded, like 802.22 =)
or widely used but irrelevant yet[like ZigBee]to networking -)
by Basiley
Tue Dec 11, 2012 8:59 pm
Forum: Beginner Basics
Topic: fighting ISP, tampering DNS TTL
Replies: 4
Views: 2383

Re: fighting ISP, tampering DNS TTL

cool, tnx. thats would help too[others ISP's tend do other dirty work - they alter TTL of ALL traffic to prevent consumers use ANY networking devices between their and customers PC's, to force them connect their PC's DIRECTLY to cable. users forced to obey or start modifying NIC's drivers and Router...
by Basiley
Tue Dec 11, 2012 11:39 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1017198

Re: CLOUD CORE ROUTER

well if even 2011 can do about 150-170Mbps[SFP itself peaked at 85Mbps] on 64b packets traffic[without firewall, quees, p2p control and etc, you need], but 16-core and 36 core CCR with doubled frequency[and new arch]probably would do 1Mb+500Mb even with management/control you need/used. scalability ...
by Basiley
Tue Dec 11, 2012 11:19 am
Forum: RouterBOARD hardware
Topic: have mikrotik any device that can aggregate 10G?
Replies: 14
Views: 2747

Re: have mikrotik any device that can aggregate 10G?

maybe i didn't checked market properly, but only SFP+ modules can have 10Gbps and above, speeds :[ ports agregation wasn't bad idea too, cause router switch really fast, but that wasn't get you 10Gbps, but can[with two 1Gbps interface left after you connect media-converters]at least - temporally ser...
by Basiley
Mon Dec 10, 2012 7:15 pm
Forum: Wireless Networking
Topic: Wireless FAQ
Replies: 68
Views: 58682

Re: Wireless FAQ

few options, in new ROS and RB - not covered by Wiki, sadly, but it quite handy/helpful. thank you for making it ! could be nice to see some fundamental advices in Wiki too - like how more handy can become purchasing 12Db/15Db/18Db antenna for ~$30-$70 rather than struggling with Wifi-chips and sett...
by Basiley
Mon Dec 10, 2012 7:01 pm
Forum: Beginner Basics
Topic: fighting ISP, tampering DNS TTL
Replies: 4
Views: 2383

fighting ISP, tampering DNS TTL

some ISP providers will do[i guess to throttle traffic, uncertain]alter/tamper TTL of A DNS requests :[ usually dropped TTL to short time and inject bogus adreses into answers :[ happen both with p2p, youtube, social networks and virtually all popular resources/services. MiicroTIK Manual/Wiki said t...
by Basiley
Mon Dec 10, 2012 4:00 pm
Forum: The Dude
Topic: Pay for DUDE ?
Replies: 19
Views: 5472

Re: Pay for DUDE ?

saw Dude as perfect advertisement tool among IT guys, not familar with network hardware at all and management. and it handy, yes. paid model can had enterprise-specific, heavvyweight features/caps. but as stated above, doing/releasing/discussing two different version - redundant/costly for already q...
by Basiley
Mon Dec 10, 2012 3:37 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1017198

Re: CLOUD CORE ROUTER

CCR doesn't have switch chip.
WOW !!!
don't know what else to say then[keeping in mind - specified pps preformance...]
next Tilera chips[they anounced up to 916 cores on future] can turn CCR to something groundbreaking[which stomp CISCO/Juniper&etc into dust then].
by Basiley
Mon Dec 10, 2012 3:29 pm
Forum: Beginner Basics
Topic: rb2011 reset button
Replies: 17
Views: 47093

Re: rb2011 reset button

button also works correctly, if you upgrade the bootloader to 3.02 oh, i cannot restore sequence completely, but in in both cases im updated firmware[just as suggested wiki, like update itself suggested by paper in RouterBoard box/package(which is nice advice, btw)] after uploading fresh ROS[6.0rc5...
by Basiley
Mon Dec 10, 2012 3:23 pm
Forum: General
Topic: Newsletter 42
Replies: 28
Views: 4298

Re: Newsletter 42

to view Acrobat/PDF - prefer eVince[even on Windows]. nice[but short/formal] CCR presentation. also ROS 6.0 short promo -) p.s. WebFig fully working only on Chrome or MSIE. had minor issues on Opera and more serious on recent Firefox[17?] and Sea-monkey[2.14.1], for example - menus stuck in "Quick S...
by Basiley
Mon Dec 10, 2012 9:21 am
Forum: General
Topic: 6.0rc5 loses firewall and Wifi mode after reboot
Replies: 0
Views: 673

6.0rc5 loses firewall and Wifi mode after reboot

when you disable packages and restart - RouterOS - purges Firewall config. also after EACH reboot[regardless you do otherwise] - RouterOS - reset Wifi mode[persistenty return to 20Mhz B/G/N mode from different ones(like 20Mhz 11Mbps/B or 5Mhz 2Mbps/B)]. NAT and quees are okay and untouched. thats no...
by Basiley
Sun Dec 09, 2012 9:06 pm
Forum: RouterBOARD hardware
Topic: some ideas for good use[by default]for extra space of 2011
Replies: 0
Views: 443

some ideas for good use[by default]for extra space of 2011

some ideas for good use[by default]for extra space of 128Mb Flash chips on 2011 models. experienced customers with need for extra-space can safely remove this after purchase and get it. but begginers like me, really can enjoy access to MikroTik Wiki in offline mode[w/o Internet], so it worth putting...
by Basiley
Sun Dec 09, 2012 8:17 pm
Forum: Wireless Networking
Topic: Solving 20km wireless link issues
Replies: 147
Views: 102740

Re: Solving 20km wireless link issues

maybe something industrial/military ? or commercial stuff improperly installed ? If you had spectrum analyzer, GNURadio, WinRadio with this band module and etc - you can actually get some details. but generally only feds had hardware and experience to locate this both in time, frequency and location...
by Basiley
Sun Dec 09, 2012 7:32 pm
Forum: RouterBOARD hardware
Topic: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?
Replies: 84
Views: 53414

Re: GEPON OLT with new mikrotik RB2011LS-IN - is it possible

yeah, adding GEM support would be nice. rest was[name VLAN, IPv6 and etc]- already here. until that 2011 couldn't be even ONT, i guess/suppose. p.s. heavvy encryption in downstream - mean more load on CPU on high bandwitch. not sure that used 74kc[single-core without FPU] can do it. maybe derrivativ...
by Basiley
Sun Dec 09, 2012 7:29 pm
Forum: RouterBOARD hardware
Topic: 2011 power cord retainer
Replies: 34
Views: 6466

Re: 2011 power cord retainer

or simply make hole little bigger, rounded and put short rubber/plastic[elastic]tube over cable here and fix it with[non-permanent/solid]glue/compound.
by Basiley
Sun Dec 09, 2012 12:43 pm
Forum: General
Topic: x86 release to be 64 bit?
Replies: 14
Views: 7148

Re: x86 release to be 64 bit?

basically i suppose not "us", but some people[really wanted to understand], already read/understood that.
its/Subj matter of time. not so close, because MikroTik prioritized on hardware sales. when/if company grow and/or some partners emerged - something change.
by Basiley
Sun Dec 09, 2012 12:04 pm
Forum: Beginner Basics
Topic: can someone help with initial 2011 setup as home AP for ppoe
Replies: 1
Views: 682

Re: can someone help with initial 2011 setup as home AP for

anthing okay now, thread can be safely closed. after properly bringing IPv4 on WAN/LAN interfaces, putting DHCP, NTP servers and PPoE, DNS clients to work[tnx to advices there and on ixbt.com forum], setting basic NAT masquerading - anything[including wifi]seems to b working, tnx. even LCD become su...
by Basiley
Sat Dec 08, 2012 9:18 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-2HnD-IN + GPON not GePON
Replies: 10
Views: 6739

Re: RB2011UAS-2HnD-IN + GPON not GePON

same thing in shoolmate house. probably sooner ["integrated service"]provider will insteall this in mine too. you should consult you ISP about such details. basically, you need BX SFP[not SFP+ !!]module with LC connector. 1310nm TX 1490nm receive or vice versa[consult ISP again]. frequently SFP modu...
by Basiley
Sat Dec 08, 2012 9:09 pm
Forum: General
Topic: x86 release to be 64 bit?
Replies: 14
Views: 7148

Re: x86 release to be 64 bit?

Linux/toolchain not grow on trees and evolving/back-porting stuff into ancient treee wasn't economically easy even for intel or Apple. combine that with [noticeable]dissolve/moving of contributors/maintainers from x86/32bit-critical things - matter ot time. its eventual. but far away[years, not mont...
by Basiley
Sat Dec 08, 2012 8:54 pm
Forum: Beginner Basics
Topic: rb2011 reset button
Replies: 17
Views: 47093

Re: rb2011 reset button

button return to work, after i do secondary attempt to update [shipped with 5.21 if i remember correctly]firmware to 6.0rc5. my mistake was in uploading bunch of separate packages[probably some of them inconsistent/incorrect]. so after uploading one 10Mb file instead of bunch of different, reboot/re...
by Basiley
Sat Dec 08, 2012 8:44 pm
Forum: RouterBOARD hardware
Topic: Why MIPS not ARM (mostly)?
Replies: 10
Views: 3571

Re: Why MIPS not ARM (mostly)?

its "simple": MIPS more fool-proof. both firmware/hardware/software developers was hard to break it[with excptly specified code/data pages doing stack overflow wasn't as trivial task as in x86, for example], even intentionally, also it hardened against lazy programming a bit, thus consistent/predict...
by Basiley
Sat Dec 08, 2012 8:28 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-2HnD-IN unresponsive/defect touch-LCD
Replies: 27
Views: 11970

Re: RB2011UAS-2HnD-IN unresponsive/defect touch-LCD

wow, you're saved my day !! tnx & happy New Year ! im actually purchased my 2011[non-RM wariant with WiFi and LCD] and nearly start feel sorry about not picking RackMount-version instead[despite absence of (rarely used until now)WiFi], because fragile-looking enclosure, [not laugh:]red color in fron...
by Basiley
Sat Dec 08, 2012 2:33 pm
Forum: RouterBOARD hardware
Topic: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?
Replies: 84
Views: 53414

Re: GEPON OLT with new mikrotik RB2011LS-IN - is it possible

most[PON vendors HW]firmwares presently support encryption only in downstream. that prevent fishing/snooping on downstream[downloaded traffic], but clearly open your work[including cleartext passowords and other stuff]open for sniffing/decoding by bogus/altered/specially-crafted hardware/firmware on...
by Basiley
Sat Dec 08, 2012 2:21 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1017198

Re: CLOUD CORE ROUTER

wonder/expect about something placed/targeted/priced between CCR Routerboards and present 2011. built on to say/example, 8 core Tilera or 4-core ProAptiv chip[variant with FP and DSP] at 900Mhz, with 512 Mb RAM, one SFP+ cage, 8 1Gb-T copper ports, 128 Flash for[dunno] $189 ? could be game/market ch...
by Basiley
Fri Dec 07, 2012 10:58 pm
Forum: RouterBOARD hardware
Topic: 2011 power cord retainer
Replies: 34
Views: 6466

Re: 2011 power cord retainer

cool news. tnx. Subj was my biggest concern about original enclosure[aside tickness/strenght of metall and absence(w/o WM kit) W/M holes and funny/weird red color in front] maybe, before serious board/case re-design something palliative/temprally changed ? for example, making big rounded hole around...
by Basiley
Fri Dec 07, 2012 10:50 pm
Forum: RouterBOARD hardware
Topic: Can be RB800 with SFP port...
Replies: 14
Views: 2711

Re: Can be RB800 with SFP port...

yeah, CCR with SFP cage. on Tilera Chip/IC would be cool replacement for both 1100 and 800, both on present Chip/IC and 8-core/64-core processors[and other versions.] years after they also can move to soho/low-end RouterBoards too, with tremendous success, i suppose. p.s. original suggestion/request...
by Basiley
Fri Dec 07, 2012 6:35 pm
Forum: Beginner Basics
Topic: Help with configuring 2011 as home AP with PPOE Wan ISP
Replies: 18
Views: 2543

Re: Help with configuring 2011 as home AP with PPOE Wan ISP

oh, its WORKED !! basically "Quick Setup Guide" from IPv4/DHCP Manual/Wiki provide handy link to super-duper-powerful "/ip dhcp-server setup" combo, what provide reasonable[way better than i can]defaults/settings. thans alot for help !! now im can fully enjoy Internet. Happy New Year to anyone :-) t...
by Basiley
Fri Dec 07, 2012 3:57 pm
Forum: Beginner Basics
Topic: Help with configuring 2011 as home AP with PPOE Wan ISP
Replies: 18
Views: 2543

Re: Help with configuring 2011 as home AP with PPOE Wan ISP

in the general wireless preferences you will see a checkbox "default authenticate: [V]". Unckeck this, and the access list will be used. If it is empty, nobody will be able to connect. oh i get it. oh, i prefer default with auth ;) weird but [enabled]WiFi interface shown in bridge as "disabled port...
by Basiley
Fri Dec 07, 2012 3:45 pm
Forum: Beginner Basics
Topic: Help with configuring 2011 as home AP with PPOE Wan ISP
Replies: 18
Views: 2543

Re: Help with configuring 2011 as home AP with PPOE Wan ISP

I just hope you get the idea. Once you know your way around, you can configure it however you like. That's the nice thing about RouterOS. connect list is only for CPE mode, you will run AP mode access list is to limit your clients to certain MAC addresses, and drop everyone else channels is for usi...
by Basiley
Fri Dec 07, 2012 3:36 pm
Forum: Beginner Basics
Topic: Help with configuring 2011 as home AP with PPOE Wan ISP
Replies: 18
Views: 2543

Re: Help with configuring 2011 as home AP with PPOE Wan ISP

wait. you don't need to separately masquerade the LAN and the WLAN. You could do this (which is how the RB2011 is configured out of the box): 1. make a new bridge interface in the bridge menu 2. add all LAN ports and WLAN port into the Bridge (in the Bridge -> Port) menu 3. Configure DHCP-server on...
by Basiley
Fri Dec 07, 2012 3:04 pm
Forum: Beginner Basics
Topic: Help with configuring 2011 as home AP with PPOE Wan ISP
Replies: 18
Views: 2543

Re: Help with configuring 2011 as home AP with PPOE Wan ISP

by default they are only allowed to connect to the AP itself. if you want to allow them to connect to your internet provider, configure a SRC-NAT rule (called 'masquerade'), and configure them with private IP addresses. http://wiki.mikrotik.com/wiki/How_to_configure_a_home_router#Masquerade actuall...
by Basiley
Fri Dec 07, 2012 2:57 pm
Forum: Beginner Basics
Topic: Help with configuring 2011 as home AP with PPOE Wan ISP
Replies: 18
Views: 2543

Re: Help with configuring 2011 as home AP with PPOE Wan ISP

ap-bridge is the name of the access point mode in RouterOS. it doesn't bridge anything to anywhere. it simply allows multiple clients to connect. but those "multiple clients" allowed to connect to what/where ? LAN interface ? directly to ppoe client ? or even directly to WAN port ? why am asking ?:...
by Basiley
Fri Dec 07, 2012 2:12 pm
Forum: Beginner Basics
Topic: Help with configuring 2011 as home AP with PPOE Wan ISP
Replies: 18
Views: 2543

Re: Help with configuring 2011 as home AP with PPOE Wan ISP

so basically "AP Bridge" doesn't require anything ? but it bridged with what ? my "LAN"[Eth5] port ? ppoe client ? i mean, i didn't found where to look for status of WiFi Bridge, contrary to interfaces in "Bridge" icon of WinBox[or im missed it, looking :[. [about TKIP/WPA1 vs WPA2/AES] well, maybe ...
by Basiley
Fri Dec 07, 2012 11:59 am
Forum: Beginner Basics
Topic: rb2011 reset button
Replies: 17
Views: 47093

Re: rb2011 reset button

tried button too on my 2011, but it simply didn't work at all. maybe faulty element, for example.
by Basiley
Fri Dec 07, 2012 11:52 am
Forum: Beginner Basics
Topic: Help with configuring 2011 as home AP with PPOE Wan ISP
Replies: 18
Views: 2543

Re: Help with configuring 2011 as home AP with PPOE Wan ISP

wow, its works, tnx alot for pointing me there. [generally i avoid use WPA and TKIP unless bogus(read Apple/Sony or outdated)devices connected]. next question - do i need to setup DHCP server to make Wi-Fi device able to surf internet ? ie what else[aside twealing WLAN interface]i need to create/con...
by Basiley
Fri Dec 07, 2012 11:39 am
Forum: Beginner Basics
Topic: Help with configuring 2011 as home AP with PPOE Wan ISP
Replies: 18
Views: 2543

Re: Help with configuring 2011 as home AP with PPOE Wan ISP

oh i got some help from other resource ixbt.com forum member named "Джамаль" suggested add one line for masquerading and it helped. http://forum.ixbt.com/topic.cgi?id=14:51483-68#2133 all i need today[before ISP update connection to GPON and i can finally use SFP module(sadly they demand models with...
by Basiley
Thu Dec 06, 2012 5:47 pm
Forum: Beginner Basics
Topic: can someone help with initial 2011 setup as home AP for ppoe
Replies: 1
Views: 682

can someone help with initial 2011 setup as home AP for ppoe

Hi can someone help with initial 2011 setup as home AP for ppoe ISP ? generally, goal is: share internet to one destop PC thru ethernet cable and notebook thru Wi-Fi. ISP connected thru another router in bridge mode and ppoe[192.168.1.1 in output with 192.168.1.3.192.168.1.254 DHCP] with PPOE-assign...
by Basiley
Thu Dec 06, 2012 5:00 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1017198

Re: CLOUD CORE ROUTER

truly impressive chip from TILERA :P probably increasing production/sales/usage of chips both improve income and decrease prices. and thuse bring whole new meaning/caps to networking. rumored to be used in future acoustic/radar processing and satellite imaging by US and British military, for example...
by Basiley
Thu Dec 06, 2012 4:24 pm
Forum: Beginner Basics
Topic: rb2011 reset button
Replies: 17
Views: 47093

Re: rb2011 reset button

oh, i was made same mistake during similar attempt to reset config. generally switch hard to reach from default MicroTik enclosure and hole not marked at all[even simple Triangle or "R" letter would help Alot, i guess]. tried use plastic ties[used in cabling sometimes], but occasionally found video ...
by Basiley
Thu Dec 06, 2012 4:10 pm
Forum: Beginner Basics
Topic: Help with configuring 2011 as home AP with PPOE Wan ISP
Replies: 18
Views: 2543

Re: Help with configuring 2011 as home AP with PPOE Wan ISP

ok, there is: # jan/01/2002 01:00:09 by RouterOS 6.0rc5 # software id = ZUNK-IBF5 # /interface ethernet set 0 l2mtu=1500 name=LAN set 1 l2mtu=1460 mtu=1460 name=WAN /interface pppoe-client add add-default-route=yes disabled=no interface=WAN max-mru=1460 max-mtu=1460 name=pppoe-out1 password=ppoepass...
by Basiley
Thu Dec 06, 2012 2:47 pm
Forum: Beginner Basics
Topic: Help with configuring 2011 as home AP with PPOE Wan ISP
Replies: 18
Views: 2543

Help with configuring 2011 as home AP with PPOE Wan ISP

Hi i just recently purchased 2011 Router and had some problems: My Internet provider[aDSL with PPOE] named MTS/MGTS[also known as stream.ru and under various MTU-xxx, Comstar aliases in past] 1. configured ISP CPE[aDSL router from DL]according with ISP instructions[as if PC was set-up instead of 201...