Community discussions

MikroTik App

Search found 30 matches

by kapnos
Fri Apr 20, 2018 3:14 pm
Forum: Beginner Basics
Topic: Hairpin NAT
Replies: 8
Views: 1044

Re: Hairpin NAT

Everything is working perfect with my freepbx and sip clients, I just need the hairpin NAT settings.
by kapnos
Fri Apr 20, 2018 2:00 pm
Forum: Beginner Basics
Topic: Hairpin NAT
Replies: 8
Views: 1044

Re: Hairpin NAT

your question is ? from that I can see. rule 1, dst-port=6050 is this a typo? No, I redirect the port for security reasons, WAN Port 6050 -> LAN Port 5060 What NAT rules do I have to set up for hairpin NAT so that I can access my FreePBX from LAN & WAN using the dynamic dns hostname test.ddns.net?
by kapnos
Fri Apr 20, 2018 12:51 pm
Forum: Beginner Basics
Topic: Hairpin NAT
Replies: 8
Views: 1044

Hairpin NAT

Hi, I need help setting up hairpin NAT. I have a PPPoE Connection, named Out with No-IP dynamic DNS (let's say test.ddns.net) and I have set up port forward for my FreePBX. I need hairpin NAT for the roaming clients, in & out of LAN. These are the NAT rules I have now: Flags: X - disabled, I - inval...
by kapnos
Mon Jun 06, 2016 5:07 pm
Forum: Beginner Basics
Topic: VLAN with TP-Link TL-WA701 multiple SSID
Replies: 2
Views: 1881

Re: VLAN with TP-Link TL-WA701 multiple SSID

Bump.

I didn't have any luck configuring this. Any suggestions?
by kapnos
Tue May 24, 2016 12:13 pm
Forum: Beginner Basics
Topic: PPTP VPN Subnets
Replies: 0
Views: 414

PPTP VPN Subnets

Hi,

I'm using RouterOS 6.35 with several subnets and static routes between them. I've setup PPTP Server with DHCP Pool of one of the subnets and I can successfully communicate with devices on this subnet but I can't access devices of the other subnets.
Any help?
by kapnos
Sun Jul 05, 2015 12:56 pm
Forum: Beginner Basics
Topic: VLAN with TP-Link TL-WA701 multiple SSID
Replies: 2
Views: 1881

VLAN with TP-Link TL-WA701 multiple SSID

Hi, I have a RB2011UAS and a TL-WA701 access point directly connected on eth9 port (no switch used) and I want to setup multiple ssids based on VLANs. As for now the configuration is: RB2011UAS eth9 ip 192.168.15.100 TL-WA701 lan ip 192.168.15.121, SSID1: VLAN ID-> 1, SSID2: VLAN ID-> 2 I want to se...
by kapnos
Thu Jul 11, 2013 5:49 pm
Forum: General
Topic: Netinstall failed
Replies: 1
Views: 498

Re: Netinstall failed

Anyone?
by kapnos
Wed Jul 10, 2013 4:28 pm
Forum: General
Topic: Netinstall failed
Replies: 1
Views: 498

Netinstall failed

Hi,

I tried reinstalling routeros 6.1 through netinstall to get access to graphs back but I get the following message in serial console when hitting install on netinstall:

Reading old configuration.....Kernel panic - not syncing: Attempted to kill init!


Any ideas?
by kapnos
Tue Jul 02, 2013 7:40 pm
Forum: Beginner Basics
Topic: Block remote DNS requests from WAN
Replies: 2
Views: 9051

Block remote DNS requests from WAN

Hi,

I want to allow DNS remote requests from LAN and block them from the WAN interface for example a PPPoE interface.
How do I have to configure the firewall?
by kapnos
Tue Jun 11, 2013 2:57 pm
Forum: General
Topic: v6.0 released
Replies: 321
Views: 74958

Re: v6.0 released

Any news about the missing graphs(cpu, memory, disk) on 6.0?
yes, but you need to reinstall with netinstall for the fix to take effect

Reinstall 6.0 or 6.1? Does the configuration get reseted?
by kapnos
Tue Jun 11, 2013 1:27 pm
Forum: General
Topic: v6.0 released
Replies: 321
Views: 74958

Re: v6.0 released

Any news about the missing graphs(cpu, memory, disk) on 6.0?
by kapnos
Mon Jun 03, 2013 12:38 pm
Forum: General
Topic: v6.0 released
Replies: 321
Views: 74958

Re: v6.0 released

Hi, I have the following problems after upgrading from 5.25 to 6.0: 1. Graphs for Memory and Disk Usage don't work, when I click on them I get this error: ERROR: NO ACCESS! 2. Memory usage is very high, I get only about 20MB free on 6.0, while using 5.25 I had about 100MB free. 3. I see that 3 metar...
by kapnos
Sun Jun 02, 2013 6:49 pm
Forum: General
Topic: Problems after upgrade from 5.25 to 6.0
Replies: 2
Views: 1344

Problems after upgrade from 5.25 to 6.0

Hi, I have the following problems after upgrading from 5.25 to 6.0: 1. Graphs for Memory and Disk Usage don't work, when I click on them I get this error: ERROR: NO ACCESS! 2. Memory usage is very high, I get only about 20MB free on 6.0, while using 5.25 I had about 100MB free. 3. I see that 3 metar...
by kapnos
Tue May 21, 2013 1:08 am
Forum: Beginner Basics
Topic: Upgrade from 5.25 to 6
Replies: 1
Views: 1951

Upgrade from 5.25 to 6

Hi,

I want to upgrade my routerboard from 5.25 to 6. Is there any special way to do this or do I just upload the firmware file and restart the routerboard?
by kapnos
Mon Apr 01, 2013 3:53 pm
Forum: Beginner Basics
Topic: VPN Problem
Replies: 8
Views: 3147

Re: VPN Problem

I'm already using same dhcp ip pool for both lan and vpn at another location and everything works fine, pptp & openvpn.
by kapnos
Sun Mar 31, 2013 7:11 pm
Forum: Beginner Basics
Topic: VPN Problem
Replies: 8
Views: 3147

Re: VPN Problem

arp-proxy is enabled on the bridge and on the ethernet interface already. I found a similar entry: http://forum.mikrotik.com/viewtopic.php ... 41#p344599

I, also, have multiple wan interfaces, maybe it's a bug?
by kapnos
Sun Mar 31, 2013 6:47 pm
Forum: Beginner Basics
Topic: VPN Problem
Replies: 8
Views: 3147

Re: VPN Problem

Thanks for the reply,

the vpn network range is the same with my lan network (same dhcp ip pool).
by kapnos
Sun Mar 31, 2013 6:01 pm
Forum: Beginner Basics
Topic: VPN Problem
Replies: 8
Views: 3147

VPN Problem

Hi,

I have the following problem when connecting to VPN, either PPTP or OpenVPN: I connect successfully but I have cannot reach any client in the network. I deployed a similar scenario at another location and everything worked fine. RouterOS 5.24.
by kapnos
Mon Feb 04, 2013 5:18 pm
Forum: Beginner Basics
Topic: [SOLVED] PPTP Server problem
Replies: 16
Views: 23224

Re: PPTP Server problem

Finally I found the problem. I selected the add default route on my pppoe client interface, I hadn't done that because of many different pppoe client interfaces and using mangle & static routing rules. Everything works fine now.
by kapnos
Thu Jan 17, 2013 1:23 pm
Forum: Beginner Basics
Topic: [SOLVED] PPTP Server problem
Replies: 16
Views: 23224

Re: PPTP Server problem

Nope, no luck with MTU change.
by kapnos
Wed Jan 16, 2013 12:41 pm
Forum: Beginner Basics
Topic: Routing Help !!!
Replies: 6
Views: 1106

Re: Routing Help !!!

You don't need NAT. All you need is 2 mangle rules for prerouting and 2 static routing rules for routing to 0.0.0.0/0 as described here: http://wiki.mikrotik.com/wiki/Load_Bala ... e_Gateways
by kapnos
Wed Jan 16, 2013 12:13 pm
Forum: Beginner Basics
Topic: [SOLVED] PPTP Server problem
Replies: 16
Views: 23224

Re: PPTP Server problem

Something is wrong with this routerboard/configuration. I set up another routerboard at another location with similar configuration(firewall rules etc) and was able to connect to the VPN server. Also, at the new routerboard I can connect at Webfig, SSH, etc through WAN interface, but at the old rout...
by kapnos
Mon Jan 07, 2013 7:51 pm
Forum: Beginner Basics
Topic: Two Gateways failover
Replies: 3
Views: 1939

Re: Two Gateways failover

Hi, I want something similar. I have three subnets connecting to the internet through 2 DSL Lines - PPPoE client interfaces using mangle and static routing rules as described here: http://wiki.mikrotik.com/wiki/Load_Balancing_over_Multiple_Gateways My setup is as follow: 192.168.1.0 -> PPPoE Client ...
by kapnos
Fri Jan 04, 2013 6:17 pm
Forum: Beginner Basics
Topic: [SOLVED] PPTP Server problem
Replies: 16
Views: 23224

Re: PPTP Server problem

Yes it has. My setup is as follow:
eth8 connected with adsl modem in RFC1483 Bridge mode.
PPPoE client interface set on eth8.
by kapnos
Fri Jan 04, 2013 5:24 pm
Forum: Beginner Basics
Topic: [SOLVED] PPTP Server problem
Replies: 16
Views: 23224

Re: PPTP Server problem

I removed the new connection state from the rule but no luck.
by kapnos
Fri Jan 04, 2013 12:03 pm
Forum: Beginner Basics
Topic: [SOLVED] PPTP Server problem
Replies: 16
Views: 23224

Re: PPTP Server problem

This is my firewall conf: /ip firewall filter add action=accept chain=input disabled=no protocol=icmp add action=accept chain=input connection-state=new disabled=no dst-port=1723 in-interface=OTEnet6x protocol=tcp add action=accept chain=input disabled=yes dst-port=1194 protocol=tcp add action=accep...
by kapnos
Thu Jan 03, 2013 5:37 pm
Forum: Beginner Basics
Topic: [SOLVED] PPTP Server problem
Replies: 16
Views: 23224

Re: PPTP Server problem

I checked the log with the firewall rules enabled & disabled but nothing to do with pptp has come up in the log, although I enabled pptp logging.
by kapnos
Mon Dec 31, 2012 3:22 pm
Forum: Beginner Basics
Topic: [SOLVED] PPTP Server problem
Replies: 16
Views: 23224

Re: PPTP Server problem

On every LAN interface? Because I have many LAN interfaces.
by kapnos
Mon Dec 24, 2012 4:14 pm
Forum: Beginner Basics
Topic: [SOLVED] PPTP Server problem
Replies: 16
Views: 23224

[SOLVED] PPTP Server problem

Hi, I want to set up the pptp server on Router OS 5.22. I have done the following: Enabled the PPTP server Set the PPTP IP Pool Set the PPTP Profile Set the PPTP Secret Enabled the PPTP service port Added the two firewall rules for pptp and gre I can connect to the PPTP server from inside my LAN but...
by kapnos
Thu Dec 13, 2012 2:04 am
Forum: Beginner Basics
Topic: Multiple PPPoE Gateways
Replies: 3
Views: 1092

Multiple PPPoE Gateways

Hi, I have the following scenario using RB2011UAS-RM: ether-1 ether-2 --> 2.0/24 ether-3 --> 3.0/24 ether-4 --> 4.0/24 ether-5 --> 6.0/24 ether-6 --> PPPoE1 to ISP1 ether-7 --> PPPoE2 to ISP2 ether-8 --> PPPoE3 to ISP3 ether-9 ether-10 I want the clients on 3.0/24 and 4.0/24 to gain internet access ...