MikroTik

tkgit

it will be great if 2 option added
-queue type
-parent queue
in ip dhcp-server lease

TiA

tkgit

from here :
https://www.reddit.com/r/Windscribe/com ... ard_setup/

how about SHA512 auth,
I can not use my windscribe account

tkgit

it will be great if I don't have to reboot twice for ROS & firmware upgrading

tkgit

tried in RB751u2Hnd-laptop
the result :

tkgit

had asked in 6.41 thread, but no "BOOOM", tried again, all use cat6 cable and used laptop, so these are the nperf result -laptop-RB951G-ONT http://pic.nperf.com/r/226652570-yN863Qz4.png -laptop-ONT http://pic.nperf.com/r/226653109-aEp2gb4D.png tools-profile when speedtest https://s13.posti...

tkgit

Limited troughput between RB951G & RB751u2HnD, I use cat5e cable and as seen in the pict it's 100Mbps FD link, https://s13.postimg.org/5er2hhi3n/RB951-_TPethertest.jpg https://s13.postimg.org/p9d43n7lv/RB751-_TPethertest.jpg I tried to connect my laptop to RB951(connected to ONT-UFB) then did B...

tkgit

Limited troughput between RB951G & RB751u2HnD, I use cat5e cable and as seen in the pict it's 100Mbps FD link, https://s13.postimg.org/5er2hhi3n/RB951-_TPethertest.jpg https://s13.postimg.org/p9d43n7lv/RB751-_TPethertest.jpg I tried to connect my laptop to RB951(connected to ONT-UFB) then did BW...

tkgit

from here
https://wiki.mikrotik.com/wiki/Supported_Hardware

please enable it again

tkgit

As I am a total newbie with Wi-Fi networks when it comes to setup the channel, width, etc... I was about to create a new thread when I saw yours... So if you don't mind?!... ;-) Anybody who knows some good books, videos, websites to explain the basics and more about Wi-Fi network in general? I am c...

tkgit

fast solution is binding your customer's ipad&iphone and bypassed it,
for other solution you can suggest your user to open http page firstly rather than https

tkgit

i'm sorry if OOT,
any solution for wireless dual band AC router box?
when does mikrotik make 951G-52HPACD ?

tkgit

i use rb751u2hnd, if i enable ppp-out 3g use usb 3g modem, cpu process suddenly rise to 100%
if i disable ppp-out, cpu process back to normal again, why? this problem began after RoS 6.xx

tkgit

can mikrotik engineer change linux kernel in ROS v6 to other longterm version or stable version?

tkgit

sorry if i bump this thread,

i have similiar case, i bind some gadget/notebook to 1 "to adress", then i see log message "...authorized client need your IP", why?
i need a user can use more than 1 device with 1 simple queue

tkgit

BUG: Enable ipv6 on rb751u-2hnd, reboot, then suddenly wlan interface disabled and all wireless configuration reset to default itself. do you use tunnel broker? same case with me, process suddenly rise to 100%, then some interface (usually bridge,mesh,vlan) missing, disable IPv6 package solve this ...

tkgit

http://www.bshkom.com

Yogyakarta, Indonesia

mikrotik RB, WDS network

tkgit

I scheduled a script I /system reboot at dawn to uninstall a package that is not used "wireless" in the morning just gone all pppoe-outs, vpls and bridges and all interfaces again be named as factories ether1 ... ether13 was using version 6.12 on a RB1100AH, then went back to version 5....

tkgit

is it must using public IP hosting ?

tkgit

how about "random missing interface"
2014040766000072

tkgit

Anyone else seeing problems with DHCP Server on 6.7? Regards, Joerg YES YES YES !!! Finally a friend in my misery ! I have CCR gateway, serving around 2k customers and after upgrade this problem hit me right in the face first thing in the morning upon DHCP lease refresh. I notified MT about this pr...

tkgit

All routes with routing mark is down after upgrade from 6.6 to 6.7, remove the routing mark will make route establish

do not use ip-firewall-mangle action mark route,
use route rules in ip-route

tkgit

in my 450g :
-multi parent can't be implemented in queue simple
-flappy interface if running vlan

tkgit

when a user login & authenticate in hospot, then want to view user status or logout, user can not access status.html or logout.html , error message : error 404 not found , why?

tkgit

i think if use publik (external) web server/hosting, it's must have public IP, but if use internal web server (developed server in same local network), it isn't

tkgit

does the router must have a public IP?

tkgit

can any explain about this?

usermanBF.jpg

tkgit

until ROS 6.4 i have problem

userman-bug.jpg

until i delete manually the checkpoint session, user cannot login, why?

tkgit

and i have problem duplicate status in usermanager session, example like this
http://www.forummikrotik.com/beginner-b ... erorr.html

i use ROS v 6.4

tkgit

can i use this method for trial user?

tkgit

do you use WDS?

tkgit

user manager reset after reboot

tkgit

the goal :
i want use RB433 just only for wireless connection
and
RB450 as DHCP server,DNS server,routing and bandwidth management

tkgit

activate WDS-mesh on more than 1 minipci, wireless performance drop poorly, then DHCP-server always busy

tkgit

bridgeVLAN.jpg

can i bridge wlan & vlan port?

tkgit

running OSPF and wds-mesh, after upgrade to 6.1 then cpu always 100%

tkgit

751u2hnd-ROS6-fw.jpg

why?

tkgit

running well on RB751u2HnD and RB433 with WDS mesh,OSPF routing
when stable version will be released?

tkgit

restart your computer usually solve this problem
or use winbox ver2.2.16

tkgit

my RB433 always in 100% CPU process(most wireless process in profile) after upgrade, reboot machine didn't solve the problem I use two RB433 with different configuration (1: 802.11n @ 2,4 GHz + NV2 @ 5 GHz, 2: 802.11n @ 2,4 GHz + hotspot) - working fine. Try to inspect what's a problem your configu...

tkgit

my RB433 always in 100% CPU process(most wireless process in profile) after upgrade, reboot machine didn't solve the problem

tkgit

test on the table everything 5.24 and routerboard firmware 3.02: ap 433ah + r52, r52hn, r52n, clients rb411 + integrated card, rb411+ r52, rb411+tplink TL-WN662AG, rb711-5Hn ap+ connected 4 clients, generating random traffic 5-40Mbps on one pc connected to ap, some PCs connected on clients test1: r...

tkgit

how about wds and ospf?

tkgit

i also use wds mesh (dynamic-mesh mode) in my network, all my routers (rb435g & rb433AH series) use 5.23 ROS. the problem is, how mikrotik choose handover or client handle selection? some client in my network connect to more than 1 antenna or 1 AP at a same time, is that "as usually" i...

tkgit

I created a small network,the topology is: Dedicated_DHCP-Radius-Server.jpg RB450G become server who takes care of hotspot user auth, so the router activate dhcp server, radius and user manager, there are 2 because I tried the VRRP, VRRP IP: 192.168.1.1/24 Ether1 IP (connect to 433): 192.168.2.1/24 ...

tkgit

i think it's easy to use if i can find and replace some value in winbox
and
if ROS have MAC-address list option,it's easy to make ACL

tkgit

The most stable was ROS 5.22, i have to downgrade from 5.23 to 5.22 coz my ether keep over flapping 3-4 times a day. But firmware stay ver 3.02, if this flapping continues, then i must downgrade the firmware to ver 2.41, then we will know the "devil" is the frimware itself. *Downgrade to ...

tkgit

it's a weird, in v5.23 wireless 5GHz band not working very well compare with v5.22, my %GHz WDS network can't connect each other in v5.23,but if i downgrade to 5.22,it's can run seamlessly

solved by firmware upgrade

tkgit

it's a weird, in v5.23 wireless 5GHz band not working very well compare with v5.22, my %GHz WDS network can't connect each other in v5.23,but if i downgrade to 5.22,it's can run seamlessly

tkgit

until now,i have been asking some mikrotik reseller in my country,and they did not have

tkgit

that's supported in mikrotik ROS?
http://unex.com.tw/product/dnma-h5

tkgit

thank you @Dobby, i hope i can find this stuff

tkgit

why is it so hard to find 435G in my country(Indonesia)?

tkgit

can mikrotik team add find & replace feature in winbox?

tkgit

Today i tried connect two OmniTik`s with MESH, and i am not satisfied... 550 meters (with google maps), dual chain A/N 20/40mhz and only !ONE! Mbit works. Signal on both of them is about -72 - this is normal? Devices on this same height, clean terrain / visibility 100% :( if only 2 node,i think it'...

tkgit

load balancing not 4+4=8

tkgit

such example : http://technet.microsoft.com/en-us/library/hh831385.aspx or https://infoproducts.alcatel-lucent.com/html/93-0098-08-03/7750_SR_OS_Triple_Play_Guide/wwhelp/wwhimpl/common/html/wwhelp.htm#context=7750_SR_OS_Triple_Play_Guide&file=concepts_dhcp.08.27.html can mikrotik accomodate those?

tkgit

can i use ip->dhcp-server->alert option mixed with netwatch?

note:this routers for dhcp-server purpose only, not the backbone router running VRRP

tkgit

i have 2 routerboard to be used as failover dhcp servers, is there any option/menu/script for this?
if there isn't any facility for this,can i request for the next version?

tkgit

this is my config

tkgit

for my expanding network,i research WDS dynamic mesh mode, why when i use ROS 5.22 my WDS network can't connect? it's a bug?

when i use ROS 5.14 it's work correctly

Search found 60 matches