MikroTik

frittentheke

I am trying the same; did you ever succeed in setting up your OpenVPN server on RouterOS to provide IPv6 to clients? Unfortunately not. I opened a support ticket, but obviously Mikrotik does not provide this kind of support. But I am still puzzled if this might simply be broken or got broken over t...

frittentheke

I am a little confused about the proper combination of the various config parameters to provide IPv6 for OpenVPN clients. I run two CCR2216-1G-12XS-2XQ with RouterOS 7.12.1 (will update to 7.14 soon). I already have a well working IPv4 setup which I only wanted to extend to IPv6. The routers have IP...

frittentheke

There was a similar question on Reddit a while back: https://www.reddit.com/r/ipv6/comments/ ... _mikrotik/

This approach is e.g. used by the Hoster Hetzner:
* https://docs.hetzner.com/cloud/servers/ ... tion/#ifup

frittentheke

I think you should use ULA (Unique Local Address) for this... https://en.wikipedia.org/wiki/Unique_local_address No, they serve a different purpose. ULAs are routable addresses and thus cannot be the same for multiple segments, like link-locals can. I have plenty global unicast addresses. But I exp...

frittentheke

It's somewhat common to use fe80::1 as link-local address to provide default gateway functionality to a segment. So I wanted to configure this on a routers interface as (an additional) link-local address. Apparently this does not work on Mikrotik / RouterOS (7.13): 1) Neither as native link-local ad...

frittentheke

/ipv6 route
add blackhole dst-address=2001:db8::/32

Thanks, that just worked!

frittentheke

I am have multiple BGP upstreams to which I'd like to announce our IPv6 BGP network(s), the whole /29 or maybe a few /32s. I added the prefix to an IPV6 address-list bgp-networks , just like I did for IPv4 and used that for the BGP connection: 1 name="upstream--v6" remote.address=REDACTED:...

frittentheke

*BUMP*

is there nobody else looking into using other DHCP options instead of MAC addresses to map to static leases?

frittentheke

I am wondering what the most elegant approach is to disable the IPv6 prefix advertising on a LAN interface in case the upstream is gone and the default gateway is unreachable. For routes, e.g. the default route in this case, there is check-gateway which can be used to determine if the next hop can s...

frittentheke

I hope there are plans to expose info on IPv6 peers as well.

frittentheke

I would like, instead of a MAC address, use the DHCP option 97 (https://www.rfc-editor.org/rfc/rfc4578.html#section-2.3) to configure out static leases. This UUID MUST be sent by every PXE DHCP client and promises to make the lease independent from the interface mac address by using a single UUID fo...

frittentheke

For anyone interested: I got the info that this device does NOT have the HW capability to measure the current power draw.

frittentheke

While syslog is indeed traditionally a UDP-only protocol, RFC6587 documents how multiple independent implementations have converged on an interoperable quasi-standard that meets your goals. This includes the de facto standard implementation on POSIX systems, rsyslog. Their setup doc is here . Note ...

frittentheke

Since logs regularly contain sensible information, it seems sensible apply encryption and use TLS when sending logs to a remote / central log server. Just like using SNMPv3 encryption+auth when fetching metrics, which RouterOS does support. So I am wondering if the current RouterOS 7.xx might suppor...

frittentheke

When comparing the system health of an CCR1009-7G-1C-1S+ running RouterOS 6.49.8: > /system health print fan-mode: auto use-fan: main active-fan: main cpu-overtemp-check: yes cpu-overtemp-threshold: 100C cpu-overtemp-startup-delay: 1m voltage: 24.1V current: 921mA temperature: 38C cpu-temperature: 5...

frittentheke

Something like this, running in a container ? https://hub.docker.com/r/linuxserver/netbootxyz Possibly yes or just a simple webserver in a container. But this creates complexity. That's why I wanted to know if, with all the services like NFS and SMB supported natively, serving static files via HTTP...

frittentheke

I know this question / feature-request has come up in the past (https://forum.mikrotik.com/viewtopic.php?t=124086). But even after using the forum search I could not find a definitive answer ... Is RouterOS 7.x capable to serving some files via HTTP(S)? Since newer devices like e.g. the CCR2216-1G-1...

frittentheke

I also still have the exact same issue. Only Android devices of all sorts drop the connection. Our notebooks running Linux work just fine, never dropping the Wifi connection.
Nothing is shown in the log apart from that disassoc message.

frittentheke

I have a RB2011 with CAPSMAN and a hAP-AC connected to it, latest and greates firmware. My various devices, but apparently only those running Android (phones and tablets) have disconnects all the time with "disconnected, received disassoc: sending station leaving (8)" in the logs. The devi...

frittentheke

I just asked for an update on this issue. Is there really so little pain among the user base for this not beeing pursued?

frittentheke

Thanks for the quick response. Likely the mode is the issue here. But I tried various AT commands to swtich the USB device to a modem only mode. Strangely AT^U2DIAG=0 does only give me an error, but AT^SETPORT? - show current mode AT^SETPORT=? - show available modes AT^SETPORT="A1,A2;1,2,3"...

frittentheke

Maybe it's because the stick has a mass storage mode and does not switch to modem mode?

https://bugs.launchpad.net/ubuntu/+sour ... ug/1308895

frittentheke

I have a Swisscom USB stick, which is labeled:

HUAWEI E3531
Model: E3531s - 2

The RB751G-2HnD I tried does only recognize a USB device, but no ports (count = 0).

Is there any debugging I could do?

frittentheke

I am currently evaluating the performance of a CCR1016-12S-1S+ as a PPPoE-Client using a single session and doing some simple IPv4-NAT. No queues or anything fancy. 1) Looking at the numbers regarding routing performance on http://routerboard.com/CCR1016-12S-1Splus I expected some serious throughput...

frittentheke

I just received an update on the ticket. Apparently this and other routing features are somewhat "planned" for RouterOS 7

frittentheke

There are already some desperate attempts like http://forum.mikrotik.com/viewtopic.php?f=7&t=89152 . As others stated, a nice dual-band board in consumer packaging would be awesome. So far I run a RB2011UiAS-2HnD-IN which is almost perfect (why those FastEthernet ports?!), but with more and more...

frittentheke

I'd love to build what you got there in your pictures. Current and fast RB with fancy new 5Ghz-802.11ac + some 2.4 Ghz for legacy devices, exactly what I was looking for. What antennas did you use? Or to ask even lazier: Could you provide a list of all the components you have used? * RB922UAGS-5HPac...

frittentheke

Is this the best option then? How comes Mikrotik does not have a really well fitting case where one can also use the SFPs properly yet?

frittentheke

Apparently there is the new RB953GS-5HnT Routerboard now which pretty much is what I am looking for.
Does any1 know of any case I could put this baby into to make it a tabletop or wall-mounted solution?

Edit:
Oh, nevermind: http://forum.mikrotik.com/viewtopic.php?f=3&t=86343

frittentheke

Yeah, nice suggestion. Anything that comes in a case already?

frittentheke

Enable bridge mode on your wireless. Chromecast needs peer 2 peer communication on the wireless.

frittentheke

I am looking for a device with a few gigabit Ehternet ports and a 5Ghz radio.
RB951G is pretty much it, except it's only available with 2.4Ghz. Any ideas what to get/modify instead?

frittentheke

I am running an RB951G-2HnD as an AP. I would like to add 5GHz to it as well, so assuming I can find a 5GHz Atheros USB stick, can I plug one into it to use as a second WLAN interface? I am running a RB2011 with just 2.4Ghz. I'd also love to add 5Ghz to it. RB951G would be awesome as additional dev...

frittentheke

Hey all, Short summary: I want to setup a Mikrotik AP with WPA2 encryption using EAP-TTLS+PAP against a Radiator RADIUS server. I know the subject "EAP-TTLS" has been subject of a few posts in the recent years. But even though I used the search quite a bit, I cannot get a clear and plain &...

frittentheke

PING !

frittentheke

My suggestion for Mikrotik is to force the depreciation of the older IPv6 address in the client's computer by sending a RA with prefered-lifetime and valid-lifetime of zero seconds for that stale prefix if routerOS detects that the prefix has changed. This would be valueable for those customers who...

frittentheke

The issue has Ticket#2013052766001293, but no news yet from Mikrotik.

frittentheke

frittentheke

As others might have noticed as well: Fixed in 6.1, thanks Mikrotik.

frittentheke

Talking to a few more people and reading RFC 6204 again, I believe this is a bug.
Therefore I take to liberty to open a "bug report".

frittentheke

I just ran into this same problem aka. BUG on 6.0.
Dynamic severs are not advertised, but as soon as I add a static one it's in the RAs.

frittentheke

Hey folks, I have a RB2011UAS-2HnD-IN running RouterOS 6. It's connected to a residential PPPoE internet connection supporting IPv6. Over this connection I get a dynamic /64. In addition to that I use DHCPv6 to get an additional (also dynamic) /48 which is then used to cut /64s out for internal inte...

frittentheke

Sorry I did not mean 10 Gbit/s but all 1 Gbit/s ports. In such a small device 10G is overkill.

As for 5 Ghz Wifi, I don't want USB devices with all external antennas. I like about the device that everything fits in the case and antennas are mounted to it.

frittentheke

I bought the RB2011UAS-2HnD-IN already and am more than happy with it. My first Mikrotik device BTW. As other already said, all 1 Gbit/s ports would be awesome. But what took me two days of thinking before then buying this thin is the single radio. I wanted to play with 5 Ghz so bad (since the ISM b...

frittentheke

4. Currently it doesn't work when configured from terminal. You need to configure it in winbox. We will fix it in future versions Just as you said, it's still broken in 6.0rc6. I now successfully set that up using winbox. The main question is, if this will be dynamic to a chaning delegated prefix. ...

Search found 45 matches