Community discussions

MikroTik App

Search found 313 matches

  • 1
  • 2
by infused
Thu Sep 03, 2020 7:02 am
Forum: General
Topic: BGP spamming updates
Replies: 6
Views: 1939

Re: BGP spamming updates

We resolved this. Routing loop by two subnets on VRRP
by infused
Wed Sep 02, 2020 1:21 pm
Forum: General
Topic: BGP spamming updates
Replies: 6
Views: 1939

Re: BGP spamming updates

Disabling ether2 stops the bgp flood, so something is happening there. Once BGP re-establishes across the link, spamming starts.

https://i.imgur.com/JRIzXq4.png
by infused
Wed Sep 02, 2020 9:13 am
Forum: General
Topic: BGP spamming updates
Replies: 6
Views: 1939

Re: BGP spamming updates

I have this logged as support request SUP-26336 Config is as as follows CCR1 # aug/30/2020 15:00:55 by RouterOS 6.47.2 add fast-forward=no name=loopback1 /interface ethernet set [ find default-name=ether1 ] comment="switch link" speed=100Mbps set [ find default-name=ether2 ] comment="...
by infused
Tue Sep 01, 2020 8:02 am
Forum: General
Topic: BGP spamming updates
Replies: 6
Views: 1939

Re: BGP spamming updates

bump, anyone? I've send a support request to Mikrotik as well
by infused
Sat Aug 29, 2020 2:58 pm
Forum: General
Topic: BGP spamming updates
Replies: 6
Views: 1939

BGP spamming updates

I have two CCR's in an active/passive config. For about a year now, they are spamming BGP updates to my provider. Like 1-3 a second. See here https://i.imgur.com/4YNOpZ0.png My ISP has asked to sort this out, but I cannot see what's causing it. They have put a filter on it, hence the only acknowledg...
by infused
Thu Aug 27, 2020 8:11 am
Forum: General
Topic: Vrrp+Vlan=Flooding?
Replies: 5
Views: 2689

Re: Vrrp+Vlan=Flooding?

bumping as we have the same issue on two CCRs
by infused
Mon Dec 30, 2019 2:27 am
Forum: General
Topic: BGP - a lot of updates
Replies: 5
Views: 1891

Re: BGP - a lot of updates

Get some training in configuring and debugging a network? What else could we suggest given that you provide absolutely zero information? I've configured these for years, but not done a lot with bgp. the logs dont say anything useful. bgp wise I can just see updates being spammed for no reason. Ther...
by infused
Sun Dec 29, 2019 1:15 pm
Forum: General
Topic: BGP - a lot of updates
Replies: 5
Views: 1891

Re: BGP - a lot of updates

any ideas?
by infused
Sat Dec 28, 2019 2:33 am
Forum: General
Topic: BGP - a lot of updates
Replies: 5
Views: 1891

BGP - a lot of updates

Hi Guys.

My BGP sessions are sending a ton of updates (around 10 a second). Our ISP as advised we need to sort it out. I cannot see why this would be occurring.

Is anyone able to advise what I'd need to check to slow this down?
by infused
Wed Feb 20, 2019 11:22 am
Forum: General
Topic: Log statistics
Replies: 1
Views: 868

Log statistics

Hi Guys.

Any recommendations on logging statistics on my core edge routers (CCR) to something where I can analyze IP addresses and such to build a few reports around traffic, where it's from etc? Some sort of open source solution or?
by infused
Tue Jan 08, 2019 8:56 am
Forum: General
Topic: RB4011 wlan1 goes unregistered
Replies: 1
Views: 975

RB4011 wlan1 goes unregistered

I've noticed on latest stable firmware after a number of days that wlan1 goes unregistered. Disabling and enabling it again registers it and clients connect again. This is repeatable.

Any ideas?
by infused
Thu Dec 27, 2018 3:47 am
Forum: Wireless Networking
Topic: Mikrotik RB4011iGS+5HacQ2HnD and WiFi 802.11 AC 160mhz [SOLVED]
Replies: 45
Views: 16177

Re: Mikrotik RB4011iGS+5HacQ2HnD and WiFi 802.11 AC 160mhz [SOLVED]

20/40/80 works for me, 20/40/80/160 doesn't.
by infused
Thu Dec 27, 2018 3:39 am
Forum: Wireless Networking
Topic: RB4011 slow WiFi
Replies: 12
Views: 7152

Re: RB4011 slow WiFi

Finally set mine up today... connecting at 172mbps. Speed is crap (under 100mb).

nevermind, moved the channel widths and it's much better.
by infused
Fri Aug 03, 2018 12:38 am
Forum: General
Topic: Mikrotik in the news..bad news
Replies: 56
Views: 15831

Re: Mikrotik in the news..bad news

There was a bug that allowed to find out passwords configured on the router. After that hacker can use them and log into router as a normal user. Then he can do whatever he wants. Upgrade will close this vulnerability, but if password is not changed, then hacker can still connect. Hacker connects t...
by infused
Tue Jul 24, 2018 7:09 am
Forum: General
Topic: Router compromised [SOLVED]
Replies: 21
Views: 9652

Re: Router compromised [SOLVED]

This is *not* fixed in the latest release. This is a new bug. I am aware you removed this sentence. I just want to make sure - was it completely incorrect claim (ie new attack using old and fixed vulnerability) or is there even slight info suggesting, there might be another NEW vulnerability? @sjor...
by infused
Tue Jul 24, 2018 4:32 am
Forum: General
Topic: Router compromised [SOLVED]
Replies: 21
Views: 9652

Re: Router compromised [SOLVED]

Had the same issue today. Half our customers were compromised.
by infused
Thu Jun 28, 2018 6:48 am
Forum: General
Topic: licence.mikrotik.com
Replies: 0
Views: 810

licence.mikrotik.com

Anyone having issues registering their mikrotik's? I cannot get any CHR's registered, keep getting connection timeout. I can tracert and resolve the dns.
by infused
Thu Jun 28, 2018 6:04 am
Forum: General
Topic: problems resolving IP Cloud addresses
Replies: 13
Views: 3611

Re: problems resolving IP Cloud addresses

Whats the IP meant to be for the licensing server? Can't register a bunch of licenses. Causing me a headache.
by infused
Fri Aug 11, 2017 1:34 am
Forum: General
Topic: Slow routing table performance - please share your experiences
Replies: 4
Views: 3599

Re: Slow routing table performance - please share your experiences

There are so many threads on this. It's been touted for v7. So was Ikev2, but since Microsoft Azure makes Ikev2 mandatory, Mikrotik actually introduced it into v6.

You're going to be waiting for v7 for some time.
by infused
Fri Aug 11, 2017 1:25 am
Forum: Announcements
Topic: Newsletter 77
Replies: 40
Views: 25186

Re: Newsletter 77

Redundant psu no hot swap... its 2017... No, it's actually just $399 Look at the design of the Ubuquiti https://www.ubnt.com/edgemax/edgerouter-infinity/ See those back PSU modules? You had this on a couple of models, now you've gone back to joint modules? I'd be really happy to be wrong. I think t...
by infused
Thu Aug 10, 2017 5:18 am
Forum: Announcements
Topic: Newsletter 77
Replies: 40
Views: 25186

Re: Newsletter 77

Redundant psu no hot swap... its 2017... No, it's actually just $399 Look at the design of the Ubuquiti https://www.ubnt.com/edgemax/edgerouter-infinity/ See those back PSU modules? You had this on a couple of models, now you've gone back to joint modules? I'd be really happy to be wrong. I think t...
by infused
Wed Aug 02, 2017 2:18 pm
Forum: Announcements
Topic: Newsletter 77
Replies: 40
Views: 25186

Re: Newsletter 77

Redundant psu no hot swap... its 2017...
by infused
Wed Jul 05, 2017 2:07 am
Forum: General
Topic: multi ips on same interface/gateway
Replies: 0
Views: 712

multi ips on same interface/gateway

So I'm using multi ips on the same interface and same gateway.

How is it possible to make one the default route? Basically, the preferred source changes on what it feels like currently, which breaks IPsec.

Any recommendation on how you would configure this?
by infused
Fri Jun 30, 2017 2:36 am
Forum: General
Topic: IPSec spoke wan issue
Replies: 2
Views: 955

IPSec spoke wan issue

Hi Guys.

Is there anyway to have each router endpoint in an ipsec wan able to talk to each other?

If we configure DNS on one of the ipsec routers to use DNS of a sever in another network, the traffic routes out the wan. even with nat src rules in place.
by infused
Wed May 10, 2017 1:00 am
Forum: Virtualization
Topic: Azure
Replies: 0
Views: 2548

Azure

Is there any image or planned image for azure?
by infused
Fri Feb 24, 2017 4:56 am
Forum: General
Topic: IPSec DNS issue
Replies: 2
Views: 1098

Re: IPSec DNS issue

Seems to be traffic from the router cannot get to the other site. How can I fix that?
by infused
Fri Feb 24, 2017 3:22 am
Forum: Announcements
Topic: v6.37.4 [bugfix] is released!
Replies: 38
Views: 26141

Re: v6.37.4 [bugfix] is released!

I don't see this issue. make sure your firewall rules are correct. Without the proper rules it can sometimes work because dynamic rules are created on the outbound connection and the "established/related" rule then accepts the traffic in the other direction. However, this is not the prope...
by infused
Fri Feb 24, 2017 3:20 am
Forum: General
Topic: IPSec DNS issue
Replies: 2
Views: 1098

IPSec DNS issue

I got two sites, 192.168.10.x 192.168.11.x

I need to use the DNS server which is inside the 10.x network from the 11.x network. I can access everything from each side, but when I set on the Mikrotik to set the DNS forwarder to the other network, it doesn't work... am I missing something here?
by infused
Sat Feb 18, 2017 7:24 am
Forum: Announcements
Topic: Winbox 3.11 released!
Replies: 94
Views: 359741

Re: Winbox 3.11 released!

Any chance of the shortcuts coming back? I ask every release... every release I have further RSI :D
by infused
Sat Feb 18, 2017 3:29 am
Forum: Announcements
Topic: v6.37.4 [bugfix] is released!
Replies: 38
Views: 26141

Re: v6.37.4 [bugfix] is released!

Anyone having an issue where ipsec tunnels connect, but don't seem to be passing traffic? Have to kill them a couple of times before they connect properly?
by infused
Wed Feb 01, 2017 3:52 am
Forum: General
Topic: Open VPN using Mikrotik certs
Replies: 0
Views: 790

Open VPN using Mikrotik certs

What's the process of using Mikrotik certs instead of the other places for the certs.
by infused
Wed Feb 01, 2017 1:31 am
Forum: General
Topic: Disable capsman basic setup?
Replies: 14
Views: 15586

Re: Disable capsman basic setup?

Nevermind. Found the option :D
by infused
Wed Feb 01, 2017 1:24 am
Forum: General
Topic: Disable capsman basic setup?
Replies: 14
Views: 15586

Disable capsman basic setup?

Jesus christ batman. Upgraded an old router, now has capsman managing the wifi. How the hell can you remove it? So much config for just a basic AP
by infused
Wed Jan 18, 2017 8:56 am
Forum: Virtualization
Topic: HyperV + 2 CPU = No Ethernet
Replies: 7
Views: 6520

Re: HyperV + 2 CPU = No Ethernet

legacy nic is not going to do you any favors.
by infused
Wed Jan 18, 2017 8:45 am
Forum: General
Topic: RB3011 IPSEC Hardware Encryption?
Replies: 17
Views: 10986

Re: RB3011 IPSEC Hardware Encryption?

bugger all.
by infused
Tue Jan 17, 2017 10:33 pm
Forum: Announcements
Topic: Winbox 3.9 released!
Replies: 35
Views: 29800

Re: Winbox 3.9 released!

Guys. Can you add thew shortcut keys back in? Specifically enable, disable, delete. I don't understand why this has been removed.
by infused
Tue Jan 17, 2017 10:32 pm
Forum: General
Topic: Cacti Templates
Replies: 1
Views: 1437

Cacti Templates

Anyone got these, or got the Mikrotik plugin working? The cacti site is dead for me and all the information seems old.

Open to suggestions for something better.
by infused
Mon Jan 16, 2017 5:54 am
Forum: Announcements
Topic: Winbox 3.8 released!
Replies: 45
Views: 32131

Re: Winbox 3.8 released!

Do the function keys work now? disable/enable/comment etc? seriously not upgrading until those are there.
by infused
Mon Jan 16, 2017 2:24 am
Forum: General
Topic: Queue Tree 2xbridges
Replies: 1
Views: 1128

Queue Tree 2xbridges

Hi Guys. Been ages since I've done queue trees. So just to help me remember.. I have two bridges. bri-lan and bri-wifi. I want the lan to always have priority over wifi. So I would do the following: 1. Create a master queue with MAX Bandwidth set. In this case 150M (200M connection, full duplex). 2....
by infused
Fri Jan 06, 2017 1:02 pm
Forum: Announcements
Topic: MikroTik News December 2016 (Issue #74)
Replies: 94
Views: 38432

Re: MikroTik News December 2016 (Issue #74)

It will not be cheaper. An inexpensive gigabit SFP costs 30 bucks. I am confused about that as well... Buying a device with 12-24 SFP ports and then plugging in many copper SFPs to use it with copper ethernet for sure will be more expensive than having a dedicated copper port device with a couple o...
by infused
Fri Jan 06, 2017 1:01 pm
Forum: General
Topic: VRRP issue 6.37.1
Replies: 0
Views: 755

VRRP issue 6.37.1

Hi Guys.

2xCCR's on 6.37.1 (can't change at the moment). I have an odd issue when rebooting virtual servers connected to these via a switch where it will try to route out the passive router. Disabling and re-enabling vrrp on them fixes the issue. Any ideas?
by infused
Thu Jan 05, 2017 2:23 am
Forum: Announcements
Topic: MikroTik News December 2016 (Issue #74)
Replies: 94
Views: 38432

Re: MikroTik News December 2016 (Issue #74)

It will not be cheaper. An inexpensive gigabit SFP costs 30 bucks. I am confused about that as well... Buying a device with 12-24 SFP ports and then plugging in many copper SFPs to use it with copper ethernet for sure will be more expensive than having a dedicated copper port device with a couple o...
by infused
Thu Jan 05, 2017 2:20 am
Forum: Announcements
Topic: MikroTik News December 2016 (Issue #74)
Replies: 94
Views: 38432

Re: MikroTik News December 2016 (Issue #74)

Fantastic news about the CRS SFP+ - any news about power for this device? Any chance of having dual power supplies?
Also great news about the CCR1009

Well done :)
As you can see, there are two power LEDs
Finally :D
by infused
Wed Dec 07, 2016 12:54 pm
Forum: Announcements
Topic: Winbox 3.7 released!
Replies: 62
Views: 139950

Re: Winbox 3.7 released!

how many saved routers do you have in the loader?
about 30-40 on any one machine. Noticed this as well, but just ignored it.
by infused
Tue Dec 06, 2016 1:07 pm
Forum: Announcements
Topic: Winbox 3.7 released!
Replies: 62
Views: 139950

Re: Winbox 3.7 released!

infused - You can click on some window or entry in Winbox with right mouse button and see available shortcuts (Ctrl+F=Find, Ctrl+E=Enable,...). Can you allow for the old style shortcuts? These are god aweful and are going to give me rsi and no time. It's such a slow down now. Biggest are: Comment, ...
by infused
Mon Dec 05, 2016 12:49 pm
Forum: Virtualization
Topic: RouterOS in Vmware ESXi
Replies: 23
Views: 60118

Re: RouterOS in Vmware ESXi

bring back the ova please.
by infused
Mon Dec 05, 2016 8:59 am
Forum: Announcements
Topic: Winbox 3.7 released!
Replies: 62
Views: 139950

Re: Winbox 3.7 released!

infused - Shortcuts are available in v3 of Winbox for a while already.
How do I find out what they are? Everyone knew the old shortcuts... why change then? Makes no sense.
by infused
Mon Dec 05, 2016 8:53 am
Forum: General
Topic: CHR OVA
Replies: 0
Views: 1156

CHR OVA

Hi Guys.

Link is gone. Can you please post this again? OVA is damm handy.

Thanks
by infused
Wed Nov 30, 2016 9:22 am
Forum: General
Topic: Need more powa! RB2011UiAS-IN speed issues
Replies: 3
Views: 1458

Re: Need more powa! RB2011UiAS-IN speed issues

You've been around here long enough to know exactly which model you need. You're just boasting about your new 1Gb connection. Congrats & enjoy! :-) Sent from my Nexus 4 using Tapatalk haha. no quite. I plugged a rb3011 in to test, and hit full capacity @ %40 load. I was just checking if there w...
by infused
Wed Nov 30, 2016 5:23 am
Forum: Announcements
Topic: Winbox 3.7 released!
Replies: 62
Views: 139950

Re: Winbox 3.7 released!

Still preview the old version. Just feels better. Hard to explain.

How do I make the shortcut keys work? Like c for commend, d disable etc.
by infused
Wed Nov 30, 2016 4:44 am
Forum: General
Topic: Need more powa! RB2011UiAS-IN speed issues
Replies: 3
Views: 1458

Need more powa! RB2011UiAS-IN speed issues

So I have a RB2011UiAS-IN. Today I got gig connectivity installed. I have 10 firewall rules and max out at 250/250 @ 100% cpu. Can I squeeze anymore out of this? What you recommend for gig connections?
by infused
Sat Nov 12, 2016 3:28 am
Forum: General
Topic: Decline of Mikrotik?
Replies: 102
Views: 42605

Re: Decline of Mikrotik?

Came across this as im hunting around for fixes. Waiting on v7 so a number of fixes. We use the CCR's in our datacenters. But now hitting issues with ipv6. Is there some sort of date for v7?
by infused
Wed Nov 09, 2016 10:47 pm
Forum: General
Topic: L2TP/IPSec for Road Warrior
Replies: 93
Views: 49898

Re: L2TP/IPSec for Road Warrior

Well crap.

Is this the same for tunneling l2tp back to a domain controller behind the router (nat). I've been having issues and now thinking this is it...
by infused
Fri Oct 07, 2016 1:20 am
Forum: General
Topic: Is metarouter still a thing?
Replies: 5
Views: 2504

Re: Is metarouter still a thing?

Problem for us as a datacenter is Fortinet and Juniper have these sorts of features. So we are forced to run CHR's which use our infrastructures CPU etc. That's expensive compared to running multi routers on physical routers. The CCR's have so much power, it just seems a waste. Metarouter had so muc...
by infused
Wed Oct 05, 2016 4:07 am
Forum: General
Topic: Is metarouter still a thing?
Replies: 5
Views: 2504

Re: Is metarouter still a thing?

bump
by infused
Wed Oct 05, 2016 3:49 am
Forum: General
Topic: Chain: Foward - Drop
Replies: 1
Views: 961

Re: Chain: Foward - Drop

bump
by infused
Wed Oct 05, 2016 3:48 am
Forum: Announcements
Topic: Winbox 3.6 released!
Replies: 25
Views: 18228

Re: Winbox 3.6 released!

codered1983 - What steps do you execute to receive this error? infused - This is not a global issue. Hotkeys, close, etc. works in general. It must be something specific. Please write to support@mikrotik.com and provide information about OS, RouterOS version, steps which you did execute, etc. I hav...
by infused
Wed Oct 05, 2016 3:44 am
Forum: Announcements
Topic: v6.37.1 [current] is released!
Replies: 143
Views: 59315

Re: v6.37.1 [current] is released!

chr - missing thedude6.37.1 cant upgrade
by infused
Tue Oct 04, 2016 7:23 am
Forum: General
Topic: Chain: Foward - Drop
Replies: 1
Views: 961

Chain: Foward - Drop

So, on many routers at the end, I block everything on the forward chain. I've noticed a few issues though recently around printing in Remote Desktop using Easy Print. Apparently easyprint uses the RDP port which is tcp/udp 3389. However, when I have a forward block at the end, printing stops, or act...
by infused
Sat Oct 01, 2016 3:10 pm
Forum: General
Topic: Is metarouter still a thing?
Replies: 5
Views: 2504

Is metarouter still a thing?

Just curious. I have many CHR's now running under vmware. Which is fine. However, encryption and what not begs for a hardware router. Are there any plans to bring metarouter to the CCR, to continue developing metarouter at all?

All my ccr's sit on 1-2% cpu which makes me sad :(
by infused
Fri Sep 30, 2016 3:24 am
Forum: Announcements
Topic: v6.34.6 [bugfix] is released!
Replies: 59
Views: 30786

Re: v6.34.6 [bugfix] is released!

I just went to the next version. I think the fix on the RB2011 took far too long. I was having that issue way back around 3 years ago (or whenever they came out). I kept moaning and sent a few support files but got nothing. Good to see it fixed now, but I literally threw away a ton of these once the...
by infused
Fri Sep 30, 2016 3:18 am
Forum: Announcements
Topic: Winbox 3.6 released!
Replies: 25
Views: 18228

Re: Winbox 3.6 released!

It really sucks, and crashes all the time.

crashes on close, on new window. hot keys for disabling, commenting etc dont work.
by infused
Thu Aug 25, 2016 2:40 pm
Forum: General
Topic: BGP with two routers, same ISP, one switch
Replies: 2
Views: 1255

Re: BGP with two routers, same ISP, one switch

Thanks. I kinda had this in mind. Do you have any example of the OSPF config I would need?
by infused
Thu Aug 25, 2016 2:14 pm
Forum: General
Topic: BGP with two routers, same ISP, one switch
Replies: 2
Views: 1255

BGP with two routers, same ISP, one switch

Can someone give me an example on how to do this without linking me to some presentation? This is what I have: http://i.imgur.com/qlXtDvs.png I'm not sure what I need to be doing to get this to work. Mainly around what I need configured to make the two routers talk to each other, and the rest of the...
by infused
Fri Jul 29, 2016 10:58 am
Forum: General
Topic: BGP with two routers, one ISP
Replies: 1
Views: 1183

BGP with two routers, one ISP

Hi Guys, I have two CCR routers with separate connections to my ISP. BGP has been configured at the end. What sort of configuration do I need to do at my end to ensure that this all works? Only one switch is being used, so both routers are connected to this. It should be configured in an active/pass...
by infused
Wed Jul 13, 2016 5:58 am
Forum: General
Topic: RB3011 dual wan
Replies: 1
Views: 1509

RB3011 dual wan

Hi Guys. Just got a place currently with one wan connection. I have it on port1. I now have another wan which I have had on port6. Now, I suspect to get a dual wan going, as I need to split the same subnet, is to use mangle on routing mask and then do another default route using the routing mask. I'...
by infused
Tue Jul 12, 2016 10:41 pm
Forum: Virtualization
Topic: RouterOS in Vmware ESXi
Replies: 23
Views: 60118

Re: RouterOS in Vmware ESXi

maybe it will be easier, not yet decided if these will be made on regular basis The CHR OVA: http://www.mikrotik.com/download/share/RouterOS_CHR.ova sha256sum 1b336bc01847a14dddf7ce82a4c355dd5a9cad1011fcb6e120cf84dab866905a  RouterOS_CHR.ova Quick bump - Can you *please* *please* *please* put out t...
by infused
Fri Jun 24, 2016 11:51 am
Forum: Announcements
Topic: v6.34.6 [bugfix] is released!
Replies: 59
Views: 30786

Re: v6.34.6 [bugfix] is released!

I have huge issues on RB2011's and don't use them  anymore. I'm sure the second switch group has a firmware bug.
by infused
Tue Jun 07, 2016 4:23 am
Forum: General
Topic: Port flapping (ether6 link down/up) on RB3011UiAS-RM
Replies: 54
Views: 35477

Re: Port flapping (ether6 link down/up) on RB3011UiAS-RM

Can anyone confirm this is fixed? Getting really sick of these port issues.
by infused
Tue May 24, 2016 6:57 am
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM - auto negotiation problem
Replies: 112
Views: 72710

Re: RB2011UAS-RM - auto negotiation problem

Was this ever resolved, or did Mikrotik shove it in the too hard basket?

We have this on 2x RB2011-RM's. Both switch groups flapping.

Actually, read up and see it was a hardware fault. So how do I tell what version of the 2011 it is?
by infused
Sun May 15, 2016 12:45 pm
Forum: General
Topic: not having a established/related rule makes connections slow (CCR)
Replies: 2
Views: 1286

not having a established/related rule makes connections slow (CCR)

Hi Guys. Have my CCR with around 100 rules, quite a few subnets and routing. I had an established rule close to the top as I wanted to avoid processing the rules. However, now I need to constantly ensure the rules are all processed. So I disabled this rule. From here on, all new connections/existing...
by infused
Tue Apr 12, 2016 3:46 am
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 113802

Re: New Ethernet port flap issue enquiery, PLS JOIN!

RB2011UAS ROS 6.32.4

PORT 6 WAN drops on first DHCP connection in the morning and renegotiates to 100mbit.

Image
by infused
Tue Apr 12, 2016 3:37 am
Forum: General
Topic: Port flapping (ether6 link down/up) on RB3011UiAS-RM
Replies: 54
Views: 35477

Re: Port flapping (ether6 link down/up) on RB3011UiAS-RM

Just bumping this as we are seeing this on a couple of RB2011UAS

Port 6 wan (1gbit) drops and reconnects @ 100mbit when new devices connect via DHCP in the morning. Blocking the first device's mac doesn't seem to fix it, indicating there is something else going on here...
by infused
Wed Feb 17, 2016 2:14 am
Forum: General
Topic: CVE-2015-7547 linux bug
Replies: 1
Views: 1744

CVE-2015-7547 linux bug

by infused
Tue Nov 17, 2015 1:15 am
Forum: General
Topic: Marking Packets/Connections
Replies: 2
Views: 1315

Re:

There's a little secret that not much people know... If a connection or packet does not get mark by a rule you created, it gets marked as "no mark". Unless I'm mistaken, you don't need that second mangle rule. Sent from my SM-G920I using Tapatalk Yep - I do know that. But don't think that...
by infused
Mon Nov 16, 2015 10:58 pm
Forum: General
Topic: Marking Packets/Connections
Replies: 2
Views: 1315

Marking Packets/Connections

Hi Guys. Just a little confused on Mangle, and need some clarification on the queues that go along with it. Generally I build a Queue Tree with slightly less available bandwidth than the connection has, in order to make the limiting work. I have been marking packets as in my mind,it doesn't allow an...
by infused
Thu Nov 12, 2015 5:46 am
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 290
Views: 391180

Re: Tool: Realtime per IP traffic monitor for home/office

Just replying to let you know this works really well. Thanks
by infused
Thu Oct 29, 2015 1:44 pm
Forum: General
Topic: DMZ with public IP address
Replies: 4
Views: 2585

Re: DMZ with public IP address

More that routed traffic should not be considered by the firewall. It's coming through as natted, yet there is no nat rules apart from the one lan->wan masquerade rule. I have no dst nat rules to the DMZ port. Routing is working fine. I guess my question is, why am I seeing that traffic, or am I jus...
by infused
Thu Oct 29, 2015 5:21 am
Forum: General
Topic: DMZ with public IP address
Replies: 4
Views: 2585

DMZ with public IP address

Hi Guys. So, using a CCR, I have 3 ports. 1 - WAN 2 - LAN 3 - DMZ Public IP/Subnet addresses are assigned to port 1 and 3. Phone system is attached to port 3 using public address. I have a nat masquerade rule for LAN going out WAN The DMZ port seems to be working well, however, when locking down the...
by infused
Thu Oct 22, 2015 1:39 am
Forum: General
Topic: 6.32.3 version released!
Replies: 47
Views: 20801

Re: 6.32.3 [CURRENT] version released!

So far this new release system is working well.

Good job Mikrotik.
by infused
Thu Aug 27, 2015 7:25 am
Forum: Announcements
Topic: 6.31 released
Replies: 227
Views: 77991

Re: 6.31 released

Normis, Unfortunately version v6.32.RC3 still hangs or completely freezes devices RB751U-2HnD after using for a couple of hours. For several years all standard releases was never a danger to upgrade to, but with version v6.31 you guys just made it. If I were you, I might consider to call back versi...
by infused
Tue Aug 18, 2015 1:46 pm
Forum: Announcements
Topic: 6.31 released
Replies: 227
Views: 77991

Re: 6.31 released

I mean inside of the Mikrotik OS, to spawn up virtual routers within RouterOS, like metarouter, which works on CCR etc. We have a couple of Fortinets to do this where we need it.
CCRs do not support Metarouter.
That's my point.
by infused
Tue Aug 18, 2015 11:46 am
Forum: Announcements
Topic: 6.31 released
Replies: 227
Views: 77991

Re: 6.31 released

I mean inside of the Mikrotik OS, to spawn up virtual routers within RouterOS, like metarouter, which works on CCR etc. We have a couple of Fortinets to do this where we need it.
by infused
Tue Aug 18, 2015 11:26 am
Forum: Announcements
Topic: 6.31 released
Replies: 227
Views: 77991

Re: 6.31 released

So out of interest, is virtual routers going to ever come back to Mikrotik in the form of multi core routers? I totally dig vmware images, but that'd be nice too.
by infused
Tue Aug 18, 2015 7:42 am
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 579
Views: 274411

Re: Cloud Hosted Router

All depends on the pricing. Right now vedges are free to me as part of vmwares bundle. However, they are quite limited. Would be nice to replace them. I think you need to price on the vedge model where you can select to deploy: compact normal max compact is basically 1 core, 512mb memory normal 2 co...
by infused
Tue Aug 18, 2015 6:09 am
Forum: Announcements
Topic: 6.31 released
Replies: 227
Views: 77991

Re: 6.31 released

Virtual Support... oh hell yeah.
by infused
Mon Aug 03, 2015 12:06 pm
Forum: Announcements
Topic: v6.30.2 bugfix release
Replies: 147
Views: 58929

Re: v6.30.2 bugfix release

Any reason why when upgrading it does not update the firmware automatically?
by infused
Mon Jul 20, 2015 4:54 am
Forum: Announcements
Topic: v6.30.x bugfix release
Replies: 136
Views: 52025

Re: v6.30.1 bugfix release

Also, I think you guys should really just have a stable branch, and not stable... would be far easier and nicer for us as end users. The new system still does not address this. It's pretty much Russian roulette when upgrading, even if you lab it first.
by infused
Mon Jul 20, 2015 4:48 am
Forum: Announcements
Topic: v6.30.x bugfix release
Replies: 136
Views: 52025

Re: v6.30.1 bugfix release

So any major issues with CCR?
by infused
Mon Jul 20, 2015 4:42 am
Forum: General
Topic: Mikrotik Mac Addresses
Replies: 6
Views: 5893

Re: Mikrotik Mac Addresses

Excellent. Exactly what I was looking for.

ty.

Any idea where I can look this stuff up?
by infused
Mon Jul 20, 2015 1:24 am
Forum: General
Topic: Capturing 'no-mark' traffic mangle
Replies: 1
Views: 841

Re: Capturing 'no-mark' traffic mangle

Nevermind, just made a firewall rule with the no-mark attached to log. Must be a Monday.
by infused
Mon Jul 20, 2015 12:16 am
Forum: General
Topic: Mikrotik Mac Addresses
Replies: 6
Views: 5893

Re: Mikrotik Mac Addresses

It does. But my monitoring software also detects vendors by mac strings. Was hoping to get Mikrotiks mac string so I can automatically assign them when detected on a network.
by infused
Sun Jul 19, 2015 11:25 pm
Forum: General
Topic: Capturing 'no-mark' traffic mangle
Replies: 1
Views: 841

Capturing 'no-mark' traffic mangle

Is there an easy way to capture 'no-mark' traffic to the log with mangle? I just want to see what's not being captured.

Thanks.
by infused
Wed Jul 15, 2015 3:41 am
Forum: General
Topic: Mikrotik Mac Addresses
Replies: 6
Views: 5893

Mikrotik Mac Addresses

Hi Guys.

is there a regex example of Mikrotik mac address ranges. I'd like to add auto Mikrotik discovery based on mac address in to our monitoring program.
by infused
Tue Jun 30, 2015 1:51 pm
Forum: Beginner Basics
Topic: Understanding Priority/Max Limit etc
Replies: 2
Views: 1045

Re: Understanding Priority/Max Limit etc

Thanks, that's what I thought. I believe I've encountered a bug on an older ros version.
by infused
Tue Jun 30, 2015 12:51 pm
Forum: General
Topic: 6.30 RC final fixes before release
Replies: 96
Views: 34248

Re: 6.30 RC final fixes before release

Is the queue tree bug fixed from 29? The one where if you make constant changes the queues stop working?
by infused
Tue Jun 30, 2015 8:08 am
Forum: Beginner Basics
Topic: Understanding Priority/Max Limit etc
Replies: 2
Views: 1045

Understanding Priority/Max Limit etc

Hi Guys. I have a 100/100 connection. I have a queue tree with the parent with a max limit of 70M I have 6 queues that each have a Limit At 5M (each) The Max Limit of each of the leaf queues differ. What I want to know is, when does the priority actually kick in? Is it after each queue hits and pass...
by infused
Tue Jun 30, 2015 2:12 am
Forum: Announcements
Topic: v6.29 released
Replies: 191
Views: 76235

Re: v6.29 released

Thanks for that.
by infused
Mon Jun 29, 2015 2:51 am
Forum: Announcements
Topic: Manual Improvements
Replies: 94
Views: 31338

Re: Manual Improvements

It's pretty light. CRS, more on queue management and most of all, real world examples.
by infused
Mon Jun 29, 2015 2:25 am
Forum: Announcements
Topic: v6.29 released
Replies: 191
Views: 76235

Re: v6.29 released

I know this is 6.29, but does 6.28 have any significant issues? Mainly around queues, gre tunnels? I need to upgrade a few tiks from 6.15 that I have issues on. 6.29.1 has a few issues i'd like to avoid.
by infused
Tue Jun 23, 2015 4:25 pm
Forum: General
Topic: Reverse proxy
Replies: 0
Views: 1118

Reverse proxy

Is it possible to do this to redirect multipule websites?
by infused
Sun Mar 22, 2015 3:01 pm
Forum: General
Topic: rb2011 disable blue led
Replies: 1
Views: 1945

rb2011 disable blue led

Is this possible?
by infused
Sun Mar 08, 2015 7:39 am
Forum: General
Topic: v7 improvements
Replies: 0
Views: 2339

v7 improvements

Is it possible to get a list of the main improvements coming to v7?

I understand multi core is going to be a priority...
by infused
Sat Feb 14, 2015 1:31 pm
Forum: General
Topic: Webfig skins (tutorial)
Replies: 100
Views: 122961

Re: Webfig skins (tutorial)

Would be nice to be able to add logos etc.
by infused
Sat Feb 14, 2015 1:28 pm
Forum: General
Topic: CRS Trunk between two CRS SFP
Replies: 3
Views: 1501

Re: CRS Trunk between two CRS SFP

Bump. Nothing special that needs to be added using a single connection?
by infused
Wed Feb 11, 2015 2:11 am
Forum: General
Topic: RouterOS v6.26!
Replies: 69
Views: 32987

Re: RouterOS v6.26!

Is there a version of firmware in the 6.x line that seems to be "somewhat stable"? Currently we are using a mess of firmwares, and I just want everything to be the same. Is there one version that is semi-reliable? We do a lot of PPPoE, RADIUS, OSPF, BGP, IPSEC, L2TP, DHCP. No VLAN, no Wir...
by infused
Tue Feb 10, 2015 11:46 pm
Forum: General
Topic: Newsletter 63
Replies: 19
Views: 9436

Re: Newsletter 63

8x 10gbit switch please. Or more ports. Willing to sell my soul to get one.
That cracks me up :D I am also willing to sell my soul for one of these mega-throughput unicorns
Pretty sure Mikrotik can do it. They have the hardware now.
by infused
Tue Feb 10, 2015 11:45 pm
Forum: General
Topic: CRS Trunk between two CRS SFP
Replies: 3
Views: 1501

CRS Trunk between two CRS SFP

Hi Guys.

At the most basic, what needs to be set to trunk between two CRS using SFP?
by infused
Tue Feb 03, 2015 4:51 am
Forum: General
Topic: Newsletter 63
Replies: 19
Views: 9436

Re: Newsletter 63

8x 10gbit switch please. Or more ports. Willing to sell my soul to get one.

Also, add dual power supplies to 32 core ccr.
by infused
Tue Feb 03, 2015 4:18 am
Forum: General
Topic: GRE Tunnel TX Drops
Replies: 0
Views: 887

GRE Tunnel TX Drops

Hi Guys.

Have a ton of drops on GRE tunnel. 1,000,000 of them infact. Nothing on RX. Connecting to a cisco router at the other end. No encryption or anything.

Suggestions on what to look at?
by infused
Sun Jan 25, 2015 6:31 am
Forum: General
Topic: BGP issue?
Replies: 1
Views: 930

BGP issue?

Hi Guys. When running BGP, once my connection fails over, it never fails back. The behavior is quite weird. The main connection under bgp peers status says resent... then nothing. It stays in that state forever. The remote id, uptime etc are all black. A reboot of the router fixes it, and it goes ba...
by infused
Thu Nov 27, 2014 6:00 am
Forum: Announcements
Topic: Newsletter 62
Replies: 30
Views: 31607

Re: Newsletter 62

Is there a full sfp+ switch/router coming out soon?
by infused
Sun Nov 23, 2014 11:05 pm
Forum: General
Topic: 6.22 released!
Replies: 151
Views: 71146

Re: 6.22 released!

Very clever, but you really think that I didn't test new version before I upgrade a critical router? I have tested it on 3 other Routerboards... there is all ok, but on this very important router it ***** everything. So next time please try to think before post some stupidity ;) Why do you the upda...
by infused
Wed Nov 19, 2014 5:32 am
Forum: General
Topic: Configuring two CRS125-24G-1S-RM switches for redundancy
Replies: 3
Views: 2680

Re: Configuring two CRS125-24G-1S-RM switches for redundancy

No sorry, but very curious to the answer.
by infused
Sun Nov 16, 2014 8:21 am
Forum: General
Topic: 6.22 released!
Replies: 151
Views: 71146

Re: 6.22 released!

read the changelog - if you don't need a feature/fix, don't upgrade if your setup is working fine. If you do, well, report problems back in a non-whiny way with the data necessary for MT to actually fix your problem. make sure you have a backup of your Know-Good config BEFORE you attempt an upgrade...
by infused
Sun Nov 16, 2014 5:49 am
Forum: General
Topic: 6.22 released!
Replies: 151
Views: 71146

Re: 6.22 released!

read the changelog - if you don't need a feature/fix, don't upgrade if your setup is working fine. If you do, well, report problems back in a non-whiny way with the data necessary for MT to actually fix your problem. make sure you have a backup of your Know-Good config BEFORE you attempt an upgrade...
by infused
Sun Nov 16, 2014 4:18 am
Forum: General
Topic: 6.22 released!
Replies: 151
Views: 71146

Re: 6.22 released!

We normally wait 3-5 releases before upgrading. We have another unit on standby with the same config incase anything goes wrong. We also test it on another piece of identical hardware before upgrading. So, your advantage is to wait for others to find the failures of that specific versions. If every...
by infused
Sat Nov 15, 2014 4:26 am
Forum: General
Topic: 6.22 released!
Replies: 151
Views: 71146

Re: 6.22 released!

Guys you need to check this stuff before throwing it in production. i don't like buggy releases either, but you are mad if you are putting this straight out to production/clients. We normally wait 3-5 releases before upgrading. We have another unit on standby with the same config incase anything goe...
by infused
Tue Nov 11, 2014 10:21 am
Forum: General
Topic: Conn Tracking tcp timeout setting question.
Replies: 6
Views: 16619

Re: Conn Tracking tcp timeout setting question.

Just bumping this as I assume an active connection wouldn't have an issue once it's established? So setting to 1hr would be fine.
by infused
Tue Nov 11, 2014 12:43 am
Forum: General
Topic: BGP Script for notification
Replies: 0
Views: 829

BGP Script for notification

Hi Guys.

Does anyone have a script for 6.x that can send an email when BGP links change?

Cheers.
by infused
Fri Oct 31, 2014 1:08 am
Forum: Beginner Basics
Topic: Mikrotik DNS consumes 100% of CPU
Replies: 21
Views: 24474

Re: Mikrotik DNS consumes 100% of CPU

Just bumping this old request as the most likely cause is that you are having DNS attacks from outside your network since you have allow remote connections open. You need to firewall that up.
by infused
Wed Oct 29, 2014 8:06 am
Forum: Announcements
Topic: Newsletter 62
Replies: 30
Views: 31607

Re: Newsletter 62

Why did you make them look like smoke alarms? That's not a selling point. Look is half the reason we use the Unifi gear.
by infused
Thu Oct 16, 2014 4:19 am
Forum: General
Topic: Feature Request - nDPI package for Cloud Core Router
Replies: 12
Views: 6161

Re: Feature Request - nDPI package for Cloud Core Router

Bump for goodness. Would like to see this also.
by infused
Thu Oct 16, 2014 1:00 am
Forum: Scripting
Topic: Example of enable/disable a rule based on time
Replies: 4
Views: 4857

Re: Example of enable/disable a rule based on time

I would, but you actually need 3...

then if I want to block youtube, it becomes 6...

Script seems better to go to future proof it.
by infused
Wed Oct 15, 2014 10:34 pm
Forum: Scripting
Topic: Example of enable/disable a rule based on time
Replies: 4
Views: 4857

Example of enable/disable a rule based on time

Hi Guys. Could someone give me an idea on where to start with a shell of a script? I need one that disables a rule at 10:30am, enables it again 11am, disables again at 12:30pm, enables again and 1pm never done a script and kind of been forced in to this. I've done a lot of coding/powershell, so lay ...
by infused
Wed Oct 15, 2014 5:07 am
Forum: General
Topic: Blocking Facebook
Replies: 1
Views: 1002

Blocking Facebook

Hi Guys.

Looking at the best way to block Facebook. I have a customer who wants to block access between certain times. It's pretty easy to do with a web proxy, however, what about ssl?

Looking for suggestions on the best way to manage this.

Thanks
by infused
Thu Oct 02, 2014 1:18 pm
Forum: General
Topic: v6.20 released!
Replies: 146
Views: 74987

Re: v6.20 released!

/me waits for people to upgrade their access point 100km away and have it fail then complain on the forums :D
by infused
Wed Aug 27, 2014 1:21 pm
Forum: General
Topic: v6.19 released
Replies: 256
Views: 117271

Re: v6.19 released

My CCR is on 6.3.... Could this finally be the release??? :D
by infused
Wed Aug 20, 2014 5:03 pm
Forum: General
Topic: CCR cannot perform routing
Replies: 9
Views: 2437

Re: CCR cannot perform routing

do a export file=backup and paste it...
by infused
Tue Aug 19, 2014 3:11 am
Forum: General
Topic: v6.18
Replies: 109
Views: 41025

Re: v6.18

Anyone running the latest RC on the CCR? How is the performance?
by infused
Wed Aug 13, 2014 7:42 am
Forum: General
Topic: v6.18
Replies: 109
Views: 41025

Re: v6.18

Is there a good site for scripting in v6?
by infused
Mon Aug 04, 2014 7:08 am
Forum: General
Topic: v6.18
Replies: 109
Views: 41025

Re: v6.18

Keen to hear some CCR feedback.

I'm still on 6.3
by infused
Wed Jun 25, 2014 4:13 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186432

Re: CLOUD CORE ROUTER

I'm pretty critical of Mikrtotiks firmware and the CCR.

However.

I've been running my CCR in production since December 24th, 2012 on what was then v6RC6.

I'm still sitting on 6.3. It's pretty stable for us.

Not excusing Mikrotik, but you need to test your configurations.
by infused
Wed Jun 25, 2014 1:37 am
Forum: General
Topic: Input chain help
Replies: 1
Views: 1016

Re: Input chain help

No one knows why this works?
by infused
Tue Jun 24, 2014 3:10 pm
Forum: General
Topic: Input chain help
Replies: 1
Views: 1016

Input chain help

Hi Guys. I know the understanding of input chains and forward chains. What I am trying to work out, is if I am supplying DNS to my LAN, blocking everything on the input chain, except winbox (for example) stops DNS from resolving. This is expecting. Why does adding the rule on the input chain of esta...
by infused
Wed Jun 11, 2014 12:44 pm
Forum: General
Topic: Feature request for v7.x
Replies: 296
Views: 106928

Re: Feature request for v7.x

Not at all...

It would just be nice to know it's on the cards somewhere down the line. Mikrotik are getting in to Juniper and Cisco territory now with the CCR's. It seems only fitting.
by infused
Wed Jun 11, 2014 12:27 pm
Forum: General
Topic: Feature request for v7.x
Replies: 296
Views: 106928

Re: Feature request for v7.x

I disagree that enterprise support sucks. Support can make or break your business. I'm willing to bet that if you are this way inclined, your business is rather small. IMO Mikrotik need to offer some type of enterprise support. Otherwise it makes products like their 'carrier grade' products worthles...
by infused
Mon May 12, 2014 2:46 am
Forum: General
Topic: ppoe question firewall and input chain
Replies: 3
Views: 1203

Re: ppoe question firewall and input chain

Should be nat.

For example, I have a src nat for masquerade. If I block input chan port 80 dst, the lan cannot access port 80. And viceversa when incoming traffic hits the router. I thought since there is masquerade, traffic flows through the router, so it would be a forward rule.
by infused
Sun May 11, 2014 8:04 am
Forum: General
Topic: ppoe question firewall and input chain
Replies: 3
Views: 1203

ppoe question firewall and input chain

Hi Guys. I've never really dealt with ppoe and single ip addresses in mikrotiks. I'm normally setting them up with subnets and such. So yesterday I configured a Mikrotik connected to a zyxel vdsl router in bridge mode using ppoe. It all works fine. However, the IP address obtained from the provider ...
by infused
Sun May 04, 2014 10:54 pm
Forum: General
Topic: Performance impact of address lists?
Replies: 0
Views: 811

Performance impact of address lists?

Just wondering if there is a performance hit by using address lists. If so, how much?
by infused
Tue Apr 29, 2014 8:00 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186432

Re: CLOUD CORE ROUTER

Just read the new newsletter. Are dual power supplies planned for the 36 core router? If so, when is it due? I don't really want to down grade. But it's always bugged me the 'carrier' router never had dual PSU's. Very useful information about CCR is available here: http://mum.mikrotik.com/presentati...
by infused
Fri Apr 25, 2014 4:09 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186432

Re: CLOUD CORE ROUTER

Very useful information about CCR is available here: http://mum.mikrotik.com/presentations/RU14/megis.pdf Thank you. This is fantastic stuff. Where can we find more of this sort of thing? I highly suggest this is more visible to people like us browsing the forums. It actually answered a lot of my q...
by infused
Fri Apr 25, 2014 6:46 am
Forum: General
Topic: v6.12 released
Replies: 236
Views: 81565

Re: v6.12 released

RB2011UAS issues after upgrade to v6.12: - Dynamic routing protocols registered routes wrongly after first start. A simple reboot resolves this issue. - Ports are flapping. There is a very short outage every few minutes. SNMP monitoring agents on servers sends tons of alerts. There is no RX/TX erro...
by infused
Sun Apr 20, 2014 11:32 am
Forum: General
Topic: v6.12 released
Replies: 236
Views: 81565

Re: v6.12 released

Any issues with CCR reported on 6.12?
by infused
Wed Apr 16, 2014 1:23 pm
Forum: General
Topic: v6.12 released
Replies: 236
Views: 81565

Re: v6.12 released

CRS test unit on 6.12 runs sweet as.
You did not have to reset the configuration ?
I hardly had any config. The config I had worked fine though.
by infused
Wed Apr 16, 2014 11:01 am
Forum: General
Topic: v6.12 released
Replies: 236
Views: 81565

Re: v6.12 released

CRS test unit on 6.12 runs sweet as.
by infused
Mon Apr 14, 2014 8:49 am
Forum: General
Topic: CCR stops routing
Replies: 3
Views: 1296

Re: CCR stops routing

Try 6.10, if that fails, use 6.7
by infused
Wed Apr 02, 2014 9:58 am
Forum: Beginner Basics
Topic: CRS VLAN Management IP
Replies: 11
Views: 10784

Re: CRS VLAN Management IP

We gave up on ours... We use them, but without management vlan. Keen to hear if someone gets that going.
by infused
Wed Apr 02, 2014 8:44 am
Forum: General
Topic: Newsletter 55 - new products!
Replies: 33
Views: 13287

Re: Newsletter 55 - new products!

Dual power supplies... thank god. I'd buy it just for that. Now we are getting to enterprise level (please no adapters).

Any idea on pricing for that beast? (CCR)
by infused
Tue Apr 01, 2014 9:29 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186432

Re: CLOUD CORE ROUTER

Posted in the other thread, I am on 6.3, which is mostly stable. Am I right in saying 6.7 is the most stable now at the moment?
by infused
Tue Apr 01, 2014 9:26 am
Forum: General
Topic: v6.11 released
Replies: 260
Views: 112358

Re: v6.11 released

What's the latest stable version for CCR? I need to move from 6.3 (pretty stable). It looks like 6.7 is the next stop?
by infused
Fri Mar 07, 2014 1:21 pm
Forum: General
Topic: v6.10 released
Replies: 248
Views: 108962

Re: v6.10 released

Good to see you delete my posts.

Pretty much confirms it all.
by infused
Thu Feb 06, 2014 5:17 am
Forum: General
Topic: CRS documentation
Replies: 79
Views: 37899

Re: CRS documentation

What do you need to be able to direct console in to the crs?
by infused
Thu Jan 30, 2014 12:41 pm
Forum: General
Topic: v6.7 released
Replies: 225
Views: 133177

Re: v6.7 released

Nothing for CRS?
by infused
Wed Jan 22, 2014 3:28 am
Forum: General
Topic: Currently best and stable V.6 ROS?
Replies: 21
Views: 8353

Re: Currently best and stable V.6 ROS?

CCR 6.3 Anything else, 6.6 (based on personal testing and deployment) Our main CCR which is the gateway for our entire network has now been in production for around 1.2 years. We used 6.0 RC6, RC11 and 6.3 only. All were stable. We have 6.7 on our backup CCR and haven't seen any issues with it... ho...
by infused
Wed Jan 08, 2014 6:06 am
Forum: General
Topic: RouterOS on Server HP DL380 G8
Replies: 3
Views: 2497

Re: RouterOS on Server HP DL380 G8

Why not get a CCR?
by infused
Mon Jan 06, 2014 12:20 am
Forum: General
Topic: v6.7 released
Replies: 225
Views: 133177

Re: v6.7 released

6.3 works fine on CCR. Haven't had any issues and I've been running it for quite a few months now.
by infused
Sat Jan 04, 2014 12:33 am
Forum: General
Topic: 6.6 to 6.7 CRS very slow LAN speed
Replies: 41
Views: 14183

Re: 6.6 to 6.7 CRS very slow LAN speed

For the CRS, stay on 6.6
by infused
Tue Dec 17, 2013 1:19 pm
Forum: General
Topic: CRS config for big network
Replies: 3
Views: 1502

Re: CRS config for big network

Yes, I would do a circle... this is not possible?
by infused
Tue Dec 17, 2013 5:40 am
Forum: General
Topic: CRS config for big network
Replies: 3
Views: 1502

CRS config for big network

Hi Guys,

I need to install 5 CRS switches in to a rack. I will have to install these in series. What's the best config to run on these in that configuration? I'm looking at linking them via one port only.
by infused
Sat Nov 30, 2013 6:48 am
Forum: General
Topic: Any plans for a better CRS?
Replies: 3
Views: 1621

Re: Any plans for a better CRS?

Not sure what that's meant to mean. CCR is meant to be enterprise, so naturally needs an enterprise switch to go with it. I wouldn't call the CRS in its current state, enterprise.
by infused
Fri Nov 29, 2013 11:54 am
Forum: General
Topic: Any plans for a better CRS?
Replies: 3
Views: 1621

Any plans for a better CRS?

Just wondering... 16 port SFP+, or 24 ports with 2 or 4 sfp+ ports, or 48 port switch?
by infused
Wed Nov 06, 2013 11:19 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186432

Re: CLOUD CORE ROUTER

Anyone having drop outs on the CCR after a month or so of up time? We are... reboot fixes it instantly.
by infused
Mon Oct 14, 2013 1:26 am
Forum: Beginner Basics
Topic: tracert loop
Replies: 9
Views: 3286

Re: tracert loop

I don't know, that's my ISPs router.
by infused
Mon Oct 14, 2013 12:54 am
Forum: Beginner Basics
Topic: tracert loop
Replies: 9
Views: 3286

Re: tracert loop

All the routes I've shown are all the routes that are there. If you do a tracert, you will see the loop yourself. Since the default route is going to 101, I don't get how there would be a loop in the network. Tracing route to account.filecloud.co.nz [202.20.2.68] over a maximum of 30 hops: 1 * * * R...
by infused
Sat Oct 12, 2013 1:19 am
Forum: Beginner Basics
Topic: tracert loop
Replies: 9
Views: 3286

Re: tracert loop

So, the main routing is what I posted above. Attached devices will then use a public address like 202.68.89.188 gw 202.68.89.177 (router)
by infused
Sat Oct 12, 2013 1:10 am
Forum: Beginner Basics
Topic: tracert loop
Replies: 9
Views: 3286

Re: tracert loop

I have to add the addresses of those subnets in order for machines attached to use the public ip addresses directly. They are assigned to vlans which create the routes. If I disable them, the machines cannot use those addresses.
by infused
Fri Oct 11, 2013 1:56 pm
Forum: Beginner Basics
Topic: tracert loop
Replies: 9
Views: 3286

tracert loop

Hi guys I have a tracert loop for 3 subnets... # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S ;;; core route 0.0.0.0/0 202.20.4.101 1 20 ADC 202.68.89.152/29 202.68.89.153 bri-vlan51 0 21 ADC 202.68.89.176/28 202.68.89.177 bri-vlan50 0 If you tracert to any of those subnet's ips you will get stuck in...
by infused
Mon Sep 30, 2013 1:40 am
Forum: General
Topic: Routing
Replies: 3
Views: 1268

Re: Routing

bump... just need to confirm how to do this.
by infused
Sun Sep 29, 2013 7:05 am
Forum: General
Topic: Routing
Replies: 3
Views: 1268

Re: Routing

Right, so in this case I don't need to statically route?
by infused
Sun Sep 29, 2013 4:55 am
Forum: General
Topic: Routing
Replies: 3
Views: 1268

Routing

So, my network skills are not that great... We have one router with a bunch of subnets hanging off it that we use to do routing for hosted customers. The issue we have come across is with VPN tunnels. We configure a tunnel up and say we need to route traffic to 192.168.120.0/24, from the customers h...
by infused
Sun Sep 29, 2013 4:49 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186432

Re: CLOUD CORE ROUTER

6.3 is pretty solid on the CCR for us anyway. We have been using it in production since RC7, then RC13, then 6.3 (since December 30th 2012)

We only have one 100mbit uplink, about 20 queues, lots of firewall rules for about 10 different subnets.
by infused
Sat Sep 28, 2013 3:54 pm
Forum: General
Topic: MUM Live video from St. Louis starting now!
Replies: 52
Views: 22406

Re: MUM Live video from St. Louis starting now!

So when is the CRS (originally scheduled for May) going to be hitting the shelves :)
by infused
Sat Sep 28, 2013 3:09 pm
Forum: General
Topic: New to ROuterOS - suggestions for *good* learning material?
Replies: 7
Views: 3496

Re: New to ROuterOS - suggestions for *good* learning materi

I read half way through routeros by example then started playing. Best way imo.
by infused
Sat Sep 28, 2013 2:38 pm
Forum: General
Topic: Site to Site tunnel... how ?
Replies: 7
Views: 2676

Re: Site to Site tunnel... how ?

Just create two GRE tunnels. No idea why everyone is trying to make it so complicated. First Router: /interface gre add disabled=no dscp=0 l2mtu=65535 local-address=1.1.1.1 mtu=1476 name=\ tunnel1 remote-address=2.2.2.2 /ip address add address=172.22.1.1/32 disabled=no interface=tunnel1 network=172....
by infused
Sat Sep 28, 2013 7:55 am
Forum: Forwarding Protocols
Topic: Cisco 1800 series / DMVPN / connect MikroTik RB750 as client
Replies: 9
Views: 10999

Re: Cisco 1800 series / DMVPN / connect MikroTik RB750 as cl

Just bumping this because you can make this work, we just did.

You have your main cisco DMVPN router connect to the mikrotik using a simple GRE tunnel. Add the routes to the DMVPN and away you go. It's really not hard.

You just need to manually add the routes to the Mikrotik.
by infused
Wed Sep 18, 2013 12:57 am
Forum: Beginner Basics
Topic: Improve my queues :)
Replies: 1
Views: 1064

Improve my queues :)

Hi Guys, I have two queues on a rb2011. I am tagging sip traffic and rdp traffic to a remote provider (using address lists instead of ports), then using a queue tree to raise the priority. What I want to do is limit any non-tagged traffic to 2mb/s in both directions. Here's my code: /ip firewall man...
by infused
Sun Sep 15, 2013 12:56 pm
Forum: General
Topic: v6.4 released
Replies: 170
Views: 77591

Re: v6.4 released

For production gear, just don't upgrade.

I had a CCR and stayed on 6.0 RC13 until 6.3 had been released for awhile. It's stable for me, so I will now stay here until there are significant performance improvements that will make it worthwhile upgrading.
by infused
Wed Sep 11, 2013 1:25 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186432

Re: CLOUD CORE ROUTER

Nearly everything utilizes the cores now. Just upgrade to v6.3 and check the "/tool profile" menu to see how load is distributed.
Thanks for that. Does that mean that say firewall will use the resources of all cores, or just a bunch of cores?
by infused
Tue Sep 10, 2013 2:32 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186432

Re: CLOUD CORE ROUTER

As CCR SW is not paralellized I guess the 1100AHx2 is faster for the moment. actually some important parts are parallelized. You can get a lot more throughput that with RB1100AHx2 Can you expand on what is? Also curious to how the router, on 6.3, is now carrying load over the cores. Reason I ask is...
by infused
Mon Sep 09, 2013 11:46 am
Forum: Wireless Networking
Topic: Wireless Mesh
Replies: 5
Views: 7275

Re: Wireless Mesh

So what gear and setup are people using where they need to give a signal to a whole office (maybe two stories) and use SIP wireless phones where the connection cannot break?
by infused
Mon Sep 09, 2013 1:44 am
Forum: General
Topic: 6.3 Released
Replies: 95
Views: 28963

Re: 6.3 Released

Mikrotik: Is there a layout of what services/features use what cpus?
Tools / Profile
Doesn't show you what cpus each service is working across though.
by infused
Mon Sep 09, 2013 1:05 am
Forum: General
Topic: 6.3 Released
Replies: 95
Views: 28963

Re: 6.3 Released

Actually winbox bug in 6.3 on ccr.

Use safe mode and turn it off. I go to exit winbox and it says im in safe mode, if I quit, changes will be undone.
by infused
Mon Sep 09, 2013 12:58 am
Forum: General
Topic: 6.3 Released
Replies: 95
Views: 28963

Re: 6.3 Released

Finally upgraded my core CCR from RC13 to 6.3. Runs much smoother. Cpu seems to be better too.

I don't run BGP or IPSec, but use most other features.

Mikrotik: Is there a layout of what services/features use what cpus?
by infused
Sat Sep 07, 2013 3:15 pm
Forum: General
Topic: Instability under ddos attack
Replies: 24
Views: 12648857

Re: Instability under ddos attack

bumping. Keen to know the outcome of this.
by infused
Fri Sep 06, 2013 3:46 pm
Forum: Wireless Networking
Topic: Wireless Mesh
Replies: 5
Views: 7275

Re: Wireless Mesh

Interesting. What hardware were you using? I'd be keen to replicate.
by infused
Fri Sep 06, 2013 3:37 pm
Forum: General
Topic: RB2011UAS-2HnD defective? return to reseller?
Replies: 10
Views: 2734

Re: RB2011UAS-2HnD defective? return to reseller?

Nothing wrong with them...
by infused
Thu Sep 05, 2013 3:08 am
Forum: General
Topic: v6.1 RB2011UAS-RM Unclassified CPU Usage?
Replies: 7
Views: 2911

Re: v6.1 RB2011UAS-RM Unclassified CPU Usage?

Yeah, still have the same issue...
by infused
Thu Sep 05, 2013 2:29 am
Forum: Wireless Networking
Topic: Wireless Mesh
Replies: 5
Views: 7275

Wireless Mesh

Hi Guys,

I've used Mikrotik a lot now, but not really for wireless.

What would you recommend for putting in the ceiling for an office that's about 400-500sqm. We want to create a mesh so they can walk around the building without being disconnected.

Any help appreciated.
by infused
Wed Sep 04, 2013 2:32 pm
Forum: General
Topic: Router drops when Wireless AP plugged in
Replies: 3
Views: 1485

Re: Router drops when Wireless AP plugged in

Solved. Bad managed switch. Now in the bin and everything is working good.
by infused
Wed Sep 04, 2013 2:31 pm
Forum: General
Topic: 6.3 Released
Replies: 95
Views: 28963

Re: 6.3 Released

Mikrotik, are these new builds adding to the performance of the CCR, specifically around sharing load over cores?
by infused
Wed Sep 04, 2013 10:27 am
Forum: General
Topic: 6.3 Released
Replies: 95
Views: 28963

Re: 6.3 Released

any issues on ccr yet?
by infused
Tue Sep 03, 2013 1:36 am
Forum: General
Topic: Router drops when Wireless AP plugged in
Replies: 3
Views: 1485

Router drops when Wireless AP plugged in

Hi Guys,

Two different mikrotiks, two different wireless APs. Everytime we plug the AP in to the mikrotik, everyone loses connection to the router.

Any ideas?
by infused
Mon Sep 02, 2013 2:50 am
Forum: General
Topic: SIP QoS
Replies: 6
Views: 2944

Re: SIP QoS

Yep. Sounds like what I'm doing.

I'm just trying to sus out these queues.
by infused
Mon Sep 02, 2013 2:34 am
Forum: General
Topic: New Packet flow diagram
Replies: 99
Views: 87991

Re: New Packet flow diagram

Can anyone chuck this in a nice, printable pdf?
by infused
Mon Sep 02, 2013 12:44 am
Forum: General
Topic: SIP QoS
Replies: 6
Views: 2944

Re: SIP QoS

Your guide looks good, but it's a bit much for what I'm wanting to achieve. When would you mark connections over packet?

Also, If I create a default queue of 10m/10m at priority 8, then a sub queue with 2m/2m with priority 1 which has the marked sip traffic, would that work?
by infused
Sun Sep 01, 2013 2:56 pm
Forum: General
Topic: SIP QoS
Replies: 6
Views: 2944

Re: SIP QoS

Slow, congested connection for this customer. So I need it.
by infused
Sun Sep 01, 2013 1:13 pm
Forum: General
Topic: v6.2 released
Replies: 247
Views: 111649

Re: v6.3

RouterOS 6.3 Build Time Aug/30/2013 13:25:42 RB433UAH hours CPU 100% http://demo2.mt.lv/graphs/cpu/

Image

in my RB433UAH build Aug/30/2013 08:26:33 processor without load (netwatch,scheduler works)
your router is open. I suggest setting a password.
by infused
Sun Sep 01, 2013 1:08 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186432

Re: CLOUD CORE ROUTER

Press … and select the MAC Address directly, then connect. ROS 6.2 and CCR1036 same for me. I can't connect with winbox and mac, even mac server configuration correctly configured +1 I have 8x CCR 1036 I am unable to connect to with MAC-Winbox. Have tried 6.0rc5 (default) and 6.2 I know that Window...
by infused
Sun Sep 01, 2013 12:44 pm
Forum: General
Topic: SIP QoS
Replies: 6
Views: 2944

SIP QoS

Yes, this question has been asked a lot. However, mine is slightly different. I know my sip providers ip ranges for RTP and Voip. So I was thinking: 1) Add all addresses to Address List 2) Mangle on Address List to Mark Connection 3) Queue with priority 1 based on marked connection How well would th...
by infused
Sun Sep 01, 2013 10:18 am
Forum: General
Topic: RB2011UAS-RM
Replies: 5
Views: 1752

Re: RB2011UAS-RM

All working... must have been a bug in 6.1. I remember seeing the same issue in the RC's.

Found it was a faulty Zyxel AP (hate those things) on the network. Upgrade it's firmware and we're in business.
by infused
Sun Sep 01, 2013 2:42 am
Forum: General
Topic: RB2011UAS-RM
Replies: 5
Views: 1752

Re: RB2011UAS-RM

Have upgraded and will test again.

Is there any difference between the two port sections (1gbit and 100mbit)? I was going to set wan on the 100mbit side and use the gbit side as a switch?
by infused
Sat Aug 31, 2013 3:10 pm
Forum: General
Topic: v6.1 RB2011UAS-RM Unclassified CPU Usage?
Replies: 7
Views: 2911

Re: v6.1 RB2011UAS-RM Unclassified CPU Usage?

noticed the same thing. Going to upgrade to 6.2 tomorrow.
by infused
Sat Aug 31, 2013 3:05 pm
Forum: General
Topic: RB2011UAS-RM
Replies: 5
Views: 1752

RB2011UAS-RM

Has anyone used these?

Mine came with 6.1 install. I deleted some bridge ports and it rebooted in to and endless loop. These were ready to be put on-site. Really annoyed. Are these things stable? From reading it doesn't seem to be.
by infused
Tue Aug 27, 2013 1:57 pm
Forum: General
Topic: MikroTik News August 2013 (Issue #50)
Replies: 17
Views: 14856

Re: MikroTik News August 2013 (Issue #50)

any wireless 802.11ac units coming?
by infused
Sat Aug 24, 2013 3:43 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186432

Re: CLOUD CORE ROUTER

Hi. I'm planning the change HP ML 150 Quad Xeon 1.6 Ghz which runs many pppoe servers + htb. I'm thinking about buying MikroTik Cloud Core Router CCR1016-12G. The question is: - does the MikroTik Cloud Core Router CCR1016-12G share CPU load to all available cores, when using many pppoe servers at m...
by infused
Sat Aug 24, 2013 3:38 pm
Forum: General
Topic: MikroTik News August 2013 (Issue #50)
Replies: 17
Views: 14856

Re: MikroTik News August 2013 (Issue #50)

CRS switch will be released very soon
Sweet, cause I'm hanging out. This juniper needs to go.
by infused
Fri Aug 23, 2013 1:28 pm
Forum: General
Topic: MikroTik News August 2013 (Issue #50)
Replies: 17
Views: 14856

Re: MikroTik News August 2013 (Issue #50)

What happened to the CCR switch?
by infused
Thu Aug 08, 2013 7:41 am
Forum: General
Topic: v6.2 released
Replies: 247
Views: 111649

Re: v6.2 released

So, we have a CCR with RC13 still, as it's generally stable for us. However, lost the queues in winbox recently. Needs a reboot.

Would you lot recommend updating it to 6.2?

We have:
40 odd filters and 40 odd nats
15 queues

That's all we use it for, but it is a production router.
by infused
Wed Aug 07, 2013 9:30 am
Forum: General
Topic: v6.2 released
Replies: 247
Views: 111649

Re: v6.2 released

Is there a beta for 6.3 for testing with some of these issues fixed? (queue graphs etc)
by infused
Mon Aug 05, 2013 7:11 am
Forum: Beginner Basics
Topic: Sip and Service Ports
Replies: 0
Views: 1041

Sip and Service Ports

Hi Guys,

We've been trying to get sip going through our mikrotik device for sometime. Today we disabled the sip service port (which I didn't know existed) and it finally worked. We have manually put the nat rules in.

So why did this work? What does the sip service port do?
by infused
Sat Aug 03, 2013 8:18 am
Forum: General
Topic: v6.2 released
Replies: 247
Views: 111649

Re: v6.2 released

hmm, to try or not to try... :D Any specific steps to upgrade ccr from rc13?
by infused
Thu Jul 11, 2013 4:27 am
Forum: Beginner Basics
Topic: Input/Output rules
Replies: 3
Views: 3441

Re: Input/Output rules

I guess with udp, since it's connectionless, established connections doesn't apply, so I specifically need input rules for ntp and dns, which I've done and work. Correct?
by infused
Thu Jul 11, 2013 4:08 am
Forum: Beginner Basics
Topic: Input/Output rules
Replies: 3
Views: 3441

Input/Output rules

Hi Guys, Having a little bit of a hard time getting my head around this. I have an input filter that allows a couple of ports. I then allow all output. The final rule disables any other form on input request. What I don't understand is, dns queries and ntp updates from the router do not work with th...
by infused
Tue Jul 02, 2013 9:01 am
Forum: Beginner Basics
Topic: Netinstall / Restore questions
Replies: 4
Views: 1556

Re: Netinstall / Restore questions

Importing from the file cut me out of winbox and only imported half the config.

I formatted the flash which gave my mac back and imported the config through serial (copy/paste) which worked fine.
by infused
Tue Jul 02, 2013 12:13 am
Forum: Beginner Basics
Topic: Netinstall / Restore questions
Replies: 4
Views: 1556

Re: Netinstall / Restore questions

Good to know.

When I do an import, the router disconnects me and I only get about half way through the import. I am connected via mac.
by infused
Mon Jul 01, 2013 4:46 am
Forum: Beginner Basics
Topic: Netinstall / Restore questions
Replies: 4
Views: 1556

Netinstall / Restore questions

Hi Guys,

When I did a full restore from one CCR to another, it took the original CCRs mac address. Is this to be expected? I see this can be fixed by using console cable going to the routerboot menu and resetting the memory.

Is it possible to access this without a console/null modem cable?

Thanks.
by infused
Fri Jun 21, 2013 2:07 pm
Forum: General
Topic: RouterOS 6.1 released
Replies: 198
Views: 74837

Re: RouterOS 6.1 released

Out of all the releases for CCR, RC13 looks like the most stable.
by infused
Fri Jun 21, 2013 2:05 pm
Forum: General
Topic: RouterOS 6.1 released
Replies: 198
Views: 74837

Re: RouterOS 6.1 released

On RC13, 60 days uptime in production. Do you recommend upgrading to 6.1?
Don't fix what ain't broken. If you are happy and nothing is missing, stay with what you have.
Thank you :)
by infused
Fri Jun 21, 2013 10:15 am
Forum: General
Topic: RouterOS 6.1 released
Replies: 198
Views: 74837

Re: RouterOS 6.1 released

On RC13, 60 days uptime in production. Do you recommend upgrading to 6.1?
by infused
Tue Jun 11, 2013 6:43 am
Forum: Beginner Basics
Topic: gre config
Replies: 2
Views: 1179

Re: gre config

It's going to be via gre. Site a and b are the gateway addresses,
by infused
Tue Jun 11, 2013 5:21 am
Forum: Beginner Basics
Topic: gre config
Replies: 2
Views: 1179

gre config

Hi guys,

what's the best way to configure the following:

site a:
IP 192.168.100.1/24

site b:
10.200.16.1/24

Site b also has a perimeter network of 172.18.16.2/24

Would you setup the gre using a local ip in the perimeter network of site b, or create a new range? Likewise with site a?
by infused
Sat Jun 08, 2013 5:12 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186432

Re: CLOUD CORE ROUTER

I really hope the switch performs better guys. Already have them on order.
by infused
Sat May 25, 2013 11:24 am
Forum: General
Topic: v6.0 released
Replies: 320
Views: 97004

Re: v6.0 released

Could someone provide me rc14 for CCR1016-12g?
rc13 is more more stable.
by infused
Thu May 16, 2013 2:13 pm
Forum: General
Topic: DHCP Server 100% CPU and reboot 6rc14
Replies: 3
Views: 2873

Re: DHCP Server 100% CPU and reboot 6rc14

by infused
Wed May 15, 2013 1:13 pm
Forum: General
Topic: v6rc14 released
Replies: 125
Views: 42015

Re: v6rc14 released

I had that bonding issue on Rc5 or 6 if I remember correctly.

RC13 seems to be the most stable at the moment.
by infused
Wed May 08, 2013 3:22 am
Forum: Beginner Basics
Topic: Hosting Provider and Queues
Replies: 0
Views: 781

Hosting Provider and Queues

Hi Guys, We host a number of things here, and I was wondering about my queue setup. I am configuring queues on perimeter addresses. I originally used the defautl queue, queue-small. I've noticed many (thousands) of dropped packets. I've changed both upload and download queue types to SFQ, and it see...
by infused
Fri May 03, 2013 2:40 pm
Forum: General
Topic: v6rc14 released
Replies: 125
Views: 42015

Re: v6rc14 released

Not unstable... depends what your doing... high throughput yes, it seems.
by infused
Mon Apr 29, 2013 10:30 pm
Forum: General
Topic: RouterOS v6.0rc13 released
Replies: 81
Views: 36387

Re: RouterOS v6.0rc13 released

Can RC13 users on CCR please confirm this bug.

When using multiple ports in a firewall filter, the counters do not track correctly

Image

If I separate these out in to separate rules, it counts correctly.
by infused
Sun Apr 28, 2013 10:17 pm
Forum: Beginner Basics
Topic: Confused about the firewall
Replies: 4
Views: 1607

Re: Confused about the firewall

Yep, saw that. Wouldn't that do extra routing that's possibly not needed though?
by infused
Sun Apr 28, 2013 12:40 pm
Forum: Beginner Basics
Topic: Confused about the firewall
Replies: 4
Views: 1607

Confused about the firewall

Hi Guys, So I am filtering on the firewall. I have an internal ip, say 172.18.1.1 that I am dst-natting web traffic to from 202.20.1.1 If I create a firewall rule blocking traffic to destination 202.20.1.1, nothing happens. When I change this to the nat address of 172.18.1.1 it works. Does that mean...
by infused
Sat Apr 27, 2013 12:21 pm
Forum: General
Topic: Rate limiting with simple queues not as stable as Queue Tree
Replies: 6
Views: 5205

Re: Rate limiting with simple queues not as stable as Queue

Interested to see your results.
by infused
Mon Apr 22, 2013 1:46 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186432

Re: CLOUD CORE ROUTER

Does anyone get long pauses on the CCR? Almost like it's timing out? We've noticed we get this outage for about 5 seconds. If you are trying to login to the router at that time, the login hangs as well. Had this on all versions so far. I've got no CCR to compare this and I think I haven't got this ...
by infused
Sun Apr 21, 2013 10:57 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186432

Re: CLOUD CORE ROUTER

Does anyone get long pauses on the CCR? Almost like it's timing out?

We've noticed we get this outage for about 5 seconds. If you are trying to login to the router at that time, the login hangs as well. Had this on all versions so far.
by infused
Fri Apr 19, 2013 5:24 pm
Forum: General
Topic: RouterOS v6.0rc13 released
Replies: 81
Views: 36387

Re: RouterOS v6.0rc13 released

Can't see dropped packets on Ethernet ports or vlans anymore?
by infused
Fri Apr 19, 2013 9:43 am
Forum: General
Topic: Most Stable Version of 5.x for core router
Replies: 1
Views: 1091

Most Stable Version of 5.x for core router

Hi Guys, What's the most stable version of 5.x for a core router? We are going to downgrade from a CCR to our RB1100AH. We need high up time and 0% packet loss. The CCR is fine, but has packet loss over time. That's our main concern as it's very noticeable for the hosting we are doing. I Should prob...
by infused
Thu Apr 18, 2013 11:55 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186432

Re: CLOUD CORE ROUTER

Is to get my money back? My CCR-1036 sucks! Because neither the gbic own mikrotik does not work, the link is ok, most do not have any traffic, longer connect a rb in other works! Now in rb2011 works perfect. What the f**k is that CCR does not work? So what you are saying is you should have read tha...
by infused
Thu Apr 18, 2013 11:48 am
Forum: General
Topic: Feature Request: MTR
Replies: 71
Views: 35070

Re: Feature Request: MTR

If it's already an external tool, why bloat routeros?
by infused
Thu Apr 18, 2013 10:05 am
Forum: Beginner Basics
Topic: Multi GRE Tunnels on one public IP
Replies: 5
Views: 2033

Re: Multi GRE Tunnels on one public IP

We got this working. Basically I had subnets defined in the address list. You need single /32's. I was not aware of this.
by infused
Wed Apr 17, 2013 10:47 pm
Forum: Beginner Basics
Topic: Simple queue goes invalid
Replies: 2
Views: 1402

Re: Simple queue goes invalid

Cheers
by infused
Wed Apr 17, 2013 12:54 pm
Forum: Beginner Basics
Topic: Simple queue goes invalid
Replies: 2
Views: 1402

Simple queue goes invalid

Hi Guys,

When a queue falls outside the time set, is it meant to go invalid? It works as intended, but I'm not sure if it's meant to show that or not.

Thanks.
by infused
Wed Apr 03, 2013 2:51 pm
Forum: Beginner Basics
Topic: Multi GRE Tunnels on one public IP
Replies: 5
Views: 2033

Re: Multi GRE Tunnels on one public IP

none at the moment. Could you give an example of what I would need?
by infused
Tue Apr 02, 2013 12:46 pm
Forum: Beginner Basics
Topic: Multi GRE Tunnels on one public IP
Replies: 5
Views: 2033

Re: Multi GRE Tunnels on one public IP

ok, it seems to work fine... however, two separate tunnels can talk to each other. Suggestions?
by infused
Tue Apr 02, 2013 12:12 pm
Forum: Beginner Basics
Topic: Multi GRE Tunnels on one public IP
Replies: 5
Views: 2033

Multi GRE Tunnels on one public IP

Is it possible to do this, and is it recommended? How do you recommend terminating these and routing the traffic to customers?

Cheers.
by infused
Sun Mar 31, 2013 9:07 am
Forum: General
Topic: RouterOS v6rc12
Replies: 78
Views: 30413

Re: RouterOS v6rc12

So simple queues are/are not working in rc13? I have 34 day uptime on rc11, not going to change for awhile. Everythings humming along.
by infused
Mon Mar 25, 2013 11:44 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186432

Re: CLOUD CORE ROUTER

Can anyone help me with a GRE Tunnel issue. Not sure if this is a bug: I have 4 subnets attached to my main header IP I have a gre tunnel listening on one of these ip addresses it does not work. If I use the same config on a single ip address with no additional ip addresses attached, it works. I can...
by infused
Tue Mar 19, 2013 10:52 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186432

Re: CLOUD CORE ROUTER

We have a CCR in production since 25th December (Yeah, I'm keen). Ran on RC7 for ages, now RC11. Had very few issues. http://iforce.co.nz/i/32ynv2d1.t1g.jpg However, just submitted a ticket about GRE Tunnel issue... might be config though, but I've had a few people look at it. Mikrotik, support case...
by infused
Fri Mar 15, 2013 9:58 am
Forum: General
Topic: MUM Croatia NEW PRODUCT ANNOUNCEMENT
Replies: 42
Views: 21686

Re: MUM Croatia NEW PRODUCT ANNOUNCEMENT

Would be good to see RouterOS actually use the power available on the CCR now. But, having a proper switch is epic. Good work. 10g sfp?
by infused
Fri Mar 15, 2013 9:45 am
Forum: Beginner Basics
Topic: GRE Tunnel with multi ips
Replies: 1
Views: 764

Re: GRE Tunnel with multi ips

bump, anyone?
  • 1
  • 2