Community discussions

MikroTik App

Search found 756 matches

by SiB
Wed Jun 03, 2020 12:32 pm
Forum: Wireless Networking
Topic: Port forwarding for DVR on RBLHGR&R11e-LTE
Replies: 1
Views: 79

Re: Port forwarding for DVR on RBLHGR&R11e-LTE

write more bcs we dont know what difficulties you have.
Maybe you not have public ip, maybe you not do DNAT rule, maybe you not allow at Filters, maybe destination device not respond...

and you should use VPN, not port forward to any CCTV system.
by SiB
Wed Jun 03, 2020 12:30 pm
Forum: Wireless Networking
Topic: LHG LTE Kit | LTE Scan shows nothing
Replies: 2
Views: 322

Re: LHG LTE Kit | LTE Scan shows nothing

scan feature works but I not have your r11e-lte module and cannot give you proper answer.
Try do supout.rif and sent it to support@mikrotik.com
by SiB
Wed Jun 03, 2020 12:28 pm
Forum: RouterBOARD hardware
Topic: RB4011IGS lte interface [SOLVED]
Replies: 5
Views: 480

Re: RB4011IGS lte interface [SOLVED]

RB4011IGS model Mikrotik i want to use LTE interface No way, that RB have not USB port or mPCIe with SIM slot... means you not have possibility to install usb or mPCIe lte module.... You can buy separate lte device who give you a internet via Ethernet... and MikroTik to other MikroTik can send ssh ...
by SiB
Wed Jun 03, 2020 12:22 pm
Forum: RouterBOARD hardware
Topic: Problem. R11e-LTE6 upgrade to R11e-LTE6_V025
Replies: 3
Views: 157

Re: Problem. R11e-LTE6 upgrade to R11e-LTE6_V025

winbox > Make supout.rif button at left site of winbox
Winbox > files - copy that file to your PC and send to support.

They can give you assistance only in your example.
by SiB
Mon Jun 01, 2020 7:28 pm
Forum: Wireless Networking
Topic: WAP AC LTE6 - abysmal LTE speeds [SOLVED]
Replies: 12
Views: 1726

Re: WAP AC LTE6 - abysmal LTE speeds [SOLVED]

Any antenna with better signal gain will be better then a antenna with lower signal gain. Remember that every antenna have got differ gain per differ frequency (band). Read more here http://www.bez-kabli.pl/viewtopic.php?p=572353#p572353 I go near to bts, like ~600m and do test every band every ISP ...
by SiB
Mon Jun 01, 2020 5:27 pm
Forum: Announcements
Topic: Future of LTE products, user feedback requested
Replies: 138
Views: 40848

Re: Future of LTE products, user feedback requested

New product, LDF R + LTE6 Brochure Quick Guide User Manual Like LHGR, 100Mbps FE port but this give us possibility to reach good signal = speed ! and maybe now this 2CA B3+B7 can work ! SrVhIa51yW.png and Internal antenna gain 8 dBi ... obtain antenna amplification of 30 dBi or more https://i.imgur....
by SiB
Mon Jun 01, 2020 4:21 pm
Forum: Wireless Networking
Topic: WAP AC LTE6 - abysmal LTE speeds [SOLVED]
Replies: 12
Views: 1726

Re: WAP AC LTE6 - abysmal LTE speeds [SOLVED]

Yes, I miss the one digit... sorry.
I modify picture to this:
Huawei CA.png
base at: https://www.elektroda.pl/rtvforum/topic3659742.html

---

UKE ściągawka:
UKE B3_1_7.png
by SiB
Mon Jun 01, 2020 3:54 pm
Forum: RouterBOARD hardware
Topic: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16
Replies: 9
Views: 1270

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Maybe better is wait... I don;t know how long but I sure that new LTE device from MikroTik will be * at M.2, Chateau is ready and probably his EG12 is a module at m.2 ? We not have sure until someone not check it. * all ppl wait for better LHGR XL + 1Gb port + LTE as m.2 slot for cat.>=12 and I hav...
by SiB
Mon Jun 01, 2020 1:47 pm
Forum: Wireless Networking
Topic: WAP AC LTE6 - abysmal LTE speeds [SOLVED]
Replies: 12
Views: 1726

Re: WAP AC LTE6 - abysmal LTE speeds [SOLVED]

Depending on the cost, I thinking returning this and getting a Huawei B535 might be a better option for me, so I can aggregate B1 and B3 bands for potentially much higher speeds... You not read a post what I write... the B535 and wAP R ac + LTE6 have the same band agreggation possibility. B618 have...
by SiB
Mon Jun 01, 2020 1:39 pm
Forum: Beginner Basics
Topic: Problem with wAP ac LTE6
Replies: 1
Views: 310

Re: Problem with wAP ac LTE6

Hello!! The first problem that i am facing is that after trying to configure my mikrotik and failing a couple of times i decided to reset the device to factory defaults, but it seems that i can't connect to it via winbox anymore. Things i tried: *Reset it, holding the reset button down until i can ...
by SiB
Sat May 30, 2020 3:40 pm
Forum: Announcements
Topic: v6.47rc [testing] is released!
Replies: 63
Views: 13308

Re: v6.47rc [testing] is released!

eworm Currently DoH will be prioritized over all other DNS configuration. Not sure if this will change any time soon.
In general this makes sense. But I vote for an excepting with conditional forwarding of DNS queries.
+1
for conditional forwarding of DNS queries AND DoH TOGETHER.
by SiB
Fri May 29, 2020 3:20 pm
Forum: RouterBOARD hardware
Topic: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16
Replies: 9
Views: 1270

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Maybe better is wait... I don;t know how long but I sure that new LTE device from MikroTik will be * at M.2, Chateau is ready and probably his EG12 is a module at m.2 ? We not have sure until someone not check it. * all ppl wait for better LHGR XL + 1Gb port + LTE as m.2 slot for cat.>=12 and I have...
by SiB
Fri May 29, 2020 12:12 am
Forum: Wireless Networking
Topic: WAP AC LTE6 - abysmal LTE speeds [SOLVED]
Replies: 12
Views: 1726

Re: WAP AC LTE6 - abysmal LTE speeds [SOLVED]

easy, HManager show you a CellID, at BTSearch.pl you can found that cellID and what Frequency it was. Set at LTE6 the same Band and check speed. You should check all tree band's and compare speeds. r11e-LTE6 can do in speed freq only 2CA: B3+B7 (1800+2600) Slow + fast like B20 + (B3 or B1 or B7) B52...
by SiB
Thu May 28, 2020 11:06 pm
Forum: Wireless Networking
Topic: WAP AC LTE6 - abysmal LTE speeds [SOLVED]
Replies: 12
Views: 1726

Re: WAP AC LTE6 - abysmal LTE speeds [SOLVED]

You mark to match.
LTE6 at B20 is always slow and you should compere them at the same cell&band but you mark all details.

Play have all B3, B1, B7 and worst B20.
Show what you have in:
/interface lte export verbose
by SiB
Thu May 28, 2020 2:56 pm
Forum: RouterBOARD hardware
Topic: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16
Replies: 9
Views: 1270

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

It turned out to launch Quectel EM12-G? yes, one person use m2<>mPCIe adapter with that module and it works similar to EP06 MikroTik Chateau use that SoC too, EG12 but not in Global version. Will the Intel XMM 7560 Cat 16 work? I don't know bcs this is a not module but SoC who is used in many modul...
by SiB
Thu May 28, 2020 10:42 am
Forum: RouterOS v7 BETA
Topic: LTE APN with fix IP
Replies: 5
Views: 792

Re: LTE APN with fix IP

seems like You right, and LTE apn is ignored, so then default is taken from BS? probably. you can try few actions to check they behhavior * usb power-reset * at+reset or proper for that modem * re-enable lte1 * reboot maybe apn is used after one of that action and you can found some schema to fix it.
by SiB
Thu May 28, 2020 10:36 am
Forum: RouterBOARD hardware
Topic: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16
Replies: 9
Views: 1270

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

List is updated and we at community not know any more what we write at forum.
I help person with LM12-g, Tetil lm940..
by SiB
Wed May 27, 2020 8:52 pm
Forum: RouterBOARD hardware
Topic: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16
Replies: 9
Views: 1270

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

About what code you say/write and why the Quectel EM12-G will not work in ecm mode ?
by SiB
Wed May 27, 2020 8:50 pm
Forum: Wireless Networking
Topic: Unable to set allow-roaming on R11e-LTE-US
Replies: 4
Views: 593

Re: Unable to set allow-roaming on R11e-LTE-US

This is a device in the field without physical access, what are the chances that after upgrade it will still work? Should I update the FW first? how do you upgrade the FW for this modem? What has more chances of fixing it? 99% of updating ROS are proper. In 1% we must re-power device and this is cl...
by SiB
Wed May 27, 2020 6:43 pm
Forum: RouterOS v7 BETA
Topic: LTE APN with fix IP
Replies: 5
Views: 792

Re: LTE APN with fix IP

Sounds a bit strange that it was shipped with beta software. Sure it hasn't been used before?
Chateau is with ROS7 only, the official release is ROS7beta5 but at Chateau is ROS7beta6.
MikroTik never publish release candidate or stable ros7 and all person who buy Chateau receive ros7b6.
by SiB
Wed May 27, 2020 2:47 pm
Forum: RouterOS v7 BETA
Topic: LTE APN with fix IP
Replies: 5
Views: 792

Re: LTE APN with fix IP

Please read a documentation, general about lte: https://wiki.mikrotik.com/wiki/Manual:Interface/LTE Please activate log-s: /system logging add topics=lte In logs try search what APN is used in reality... I know that APN can be not used, or used after usb power-reset, or just works only 1x after rebo...
by SiB
Wed May 27, 2020 2:41 pm
Forum: RouterOS v7 BETA
Topic: Chateau LTE12 RouterOSv7 beta6 LTE won't connect
Replies: 11
Views: 1691

Re: Chateau LTE12 RouterOSv7 beta6 LTE won't connect

auto | serial | Internal | External must be finish with a RB reboot. beta6 have got roblems with APN... when you use default one and change his value to other one then ROS can remember old one and still use it ?!. At telit lm940 the at-chat not work. Sometimes change who not should do anythink with ...
by SiB
Tue May 26, 2020 3:35 pm
Forum: Beginner Basics
Topic: please Help with Setting up SXT LTE Kit with Vodafone UK
Replies: 3
Views: 739

Re: please Help with Setting up SXT LTE Kit with Vodafone UK

Remember that slow to fast bands are 8,20....3,1,7 and lte module like EP06-E or R11e-lte6 have agreggation like 3+7 at that 3 fast bands, yes, only that one combination :(. Additional every B3/1/7 can do 2ca with B8/20 like fast+slow. This means if bts have got B3 and B7 then perfect if you in sign...
by SiB
Tue May 26, 2020 10:37 am
Forum: RouterOS v7 BETA
Topic: Chateau LTE12 RouterOSv7 beta6 LTE won't connect
Replies: 11
Views: 1691

Re: Chateau LTE12 RouterOSv7 beta6 LTE won't connect

You can contact with support@mikrotik.com and get npk from them, we as community not have anythinkg what is not publish official way.
by SiB
Tue May 26, 2020 1:00 am
Forum: General
Topic: info mikrotik sxt lte cat 6
Replies: 1
Views: 344

Re: info mikrotik sxt lte cat 6

Currently you can buy R11e-LTE6 or Quectel EP06-E .
SXTR have limitation to 200Mbps, you can aggregate 2x100Mb .

For newer lte category the better will be change your routerboard with 1Gb Ethernet port like RBM11G, wAPR ac etc.
by SiB
Tue May 26, 2020 12:52 am
Forum: RouterBOARD hardware
Topic: Suggestion SXT LTE vs LGH LTE
Replies: 2
Views: 382

Re: Suggestion SXT LTE vs LGH LTE

Please first go near to tower, check what Bands he running and what speed you can get from it when you have perfect situation like ~500m distance of it. Test should be band by band, next with ca. When you know what Bands are in your country, at your ISP and others. SXTR have got worse gain then LHGR...
by SiB
Mon May 25, 2020 11:39 am
Forum: Wireless Networking
Topic: Management of SXT LTE passthrough mode
Replies: 2
Views: 359

Re: Management of SXT LTE passthrough mode

if passthrough goint to next RouterBoard then you can check MNDP and discover and connect via dis way to sxt.
If you reach ~80-95Mb then you can consider use bonding from SXTR to RB via 2 cable to increase speed.

One of the best ways is use VLAN as MGMT. Many times at forum, just search.
by SiB
Mon May 25, 2020 11:28 am
Forum: RouterOS v7 BETA
Topic: Chateau LTE12 RouterOSv7 beta6 LTE won't connect
Replies: 11
Views: 1691

Re: Chateau LTE12 RouterOSv7 beta6 LTE won't connect

Hmm, you can do:
* power-reset at usb
* try send at-chat command at+reset
* try send at-chat command from my post to Quactel modules here:viewtopic.php?f=3&t=150368#p787894 like
AT&F
AT&F1
AT+CFUN=1,1
by SiB
Mon May 25, 2020 10:22 am
Forum: RouterOS v7 BETA
Topic: Chateau LTE12 RouterOSv7 beta6 LTE won't connect
Replies: 11
Views: 1691

Re: Chateau LTE12 RouterOSv7 beta6 LTE won't connect

YOU DO NOT DO DOWNGRADE because MikroTik not publish ROS7b6 jet, you should very stuff ask at support@mikrotik.com insted of forum because we not have documentation jet, this is beta device with beta software.

SoC EG12 : https://www.quectel.com/product/eg12.htm
by SiB
Mon May 25, 2020 10:17 am
Forum: RouterOS v7 BETA
Topic: Modem doesn't work in LtAP LTE6 kit
Replies: 7
Views: 980

Re: Modem doesn't work in LtAP LTE6 kit

You can only write to support@mikrotik.com because at forum we not have how give you any support more.
by SiB
Sun May 24, 2020 8:18 pm
Forum: RouterBOARD hardware
Topic: R11e-LTE6 CA Help!
Replies: 3
Views: 2764

Re: R11e-LTE6 CA Help!

There hardware limitation or software ? Maybe can expect firmware upgrade for B1+B3?
This is hardware limitation, in my situation B3+B1 would be grate too.
by SiB
Sun May 24, 2020 8:16 pm
Forum: RouterOS v7 BETA
Topic: Modem doesn't work in LtAP LTE6 kit
Replies: 7
Views: 980

Re: Modem doesn't work in LtAP LTE6 kit

Sorry, no more idea what to do.
I know about problems with stable release like this: viewtopic.php?f=3&t=160942 but you not show the mtu of module, I cannot compare that is similar or not problems.
ROS7beta have got still many mistery inside.
by SiB
Sun May 24, 2020 2:48 am
Forum: RouterBOARD hardware
Topic: Chateau LTE12: 3G and 11.2 Mbps Uplink?
Replies: 1
Views: 291

Re: Chateau LTE12: 3G and 11.2 Mbps Uplink?

You ask answered question, read this:
viewtopic.php?f=3&t=161154#p794734

And use Search next time
by SiB
Sun May 24, 2020 2:45 am
Forum: Beginner Basics
Topic: SXT LTE internet connection
Replies: 1
Views: 181

Re: SXT LTE internet connection

First, read documentation: https://wiki.mikrotik.com/wiki/Manual:Interface/LTE
Check if lte1 is running ? You receive IP from ISP (WinBox IP Address)?
You enter APN ?

Give us more details.
by SiB
Sun May 24, 2020 2:42 am
Forum: General
Topic: RBM33G + 2x R11e-LTE6, simultaneous LTE connections? [SOLVED]
Replies: 3
Views: 453

Re: RBM33G + 2x R11e-LTE6, simultaneous LTE connections? [SOLVED]

I really recommended to learn and do this one HowTo who have got the best way to use many WAN's at ones. Next you can use any method netwatch/script/pcc etc to just flow the outgoing - then this is small stuff. Bandwidth-based load-balancing with failover. This presentation also covers Mangle. This ...
by SiB
Sun May 24, 2020 1:43 am
Forum: RouterBOARD hardware
Topic: Dead Port SIM for LTE1 on LtAP [SOLVED]
Replies: 11
Views: 1663

Re: Dead Port SIM for LTE1 on LtAP [SOLVED]

WorkARound: Set mtu=1480 for lte1 and lte2. Create a scheduler who runs every 2m with that code: if ([interface get lte2 actual-mtu ] != 1480 ) do={ log warning "lte2 re-enable" system routerboard usb power-reset delay 5s; log warning "lte1 re-enable" interface lte disable lte1; interface lte enable...
by SiB
Sun May 24, 2020 1:41 am
Forum: General
Topic: RBM33G + 2x R11e-LTE6, simultaneous LTE connections? [SOLVED]
Replies: 3
Views: 453

Re: RBM33G + 2x R11e-LTE6, simultaneous LTE connections? [SOLVED]

ROS have got bug... sometimes you must add scheduler to run every 2m this code: if ([interface get lte2 actual-mtu ] != 1480 ) do={ log warning "lte2 re-enable" system routerboard usb power-reset delay 5s; log warning "lte1 re-enable" interface lte disable lte1; interface lte enable lte1; } M33G or ...
by SiB
Sat May 23, 2020 10:41 pm
Forum: General
Topic: RBM33G + 2x R11e-LTE6, simultaneous LTE connections? [SOLVED]
Replies: 3
Views: 453

Re: RBM33G + 2x R11e-LTE6, simultaneous LTE connections? [SOLVED]

Hello, i'm pretty new to Mikrotik and I can't find any "clear" information
As a topic, with a RBM33G + 2x R11e-LTE6 can I archive 2 separate
YES
and simultaneous connections
YES
bridging two eth to each LTE module)
YES
or it's possible only failover?
You can setup only that.
by SiB
Sat May 23, 2020 10:28 pm
Forum: RouterOS v7 BETA
Topic: Modem doesn't work in LtAP LTE6 kit
Replies: 7
Views: 980

Re: Modem doesn't work in LtAP LTE6 kit

you should be sure that System / Routerboard / Modem -> port is auto, not serial.
by SiB
Sat May 23, 2020 10:24 pm
Forum: Wireless Networking
Topic: LtAP LTE US Kit attempting management with cAPsMan but no LTE?
Replies: 10
Views: 1455

Re: LtAP LTE US Kit attempting management with cAPsMan but no LTE?

when ISP is removed the LTE will not automatically engage until the original ISP address drops out or release. Is there a quicker way to accomplish this? MikroTik ROS try do re-connect all time. If your lte module support commands like "at+reset" then you can trigger reconnection. Power off the USB...
by SiB
Sat May 23, 2020 1:50 am
Forum: Wireless Networking
Topic: LtAP LTE US Kit attempting management with cAPsMan but no LTE?
Replies: 10
Views: 1455

Re: LtAP LTE US Kit attempting management with cAPsMan but no LTE?

Next screenshot after export not do any think. I thinks I repeat that part with comments: LtAP WAN: /ip address add address=10.10.11.0/24 interface=lte1 network=10.10.11.0 This is ERROR, why you add that IP address at lte1 interface ? This should be receive from ISP automatical. Even if you have Pub...
by SiB
Fri May 22, 2020 6:06 pm
Forum: Wireless Networking
Topic: LtAP LTE US Kit attempting management with cAPsMan but no LTE?
Replies: 10
Views: 1455

Re: LtAP LTE US Kit attempting management with cAPsMan but no LTE?

/ip pool add name=dhcp_pool1 ranges=10.10.11.0/30 /interface bridge port add bridge=bridge1 interface=ether-LAN2 add bridge=bridge1 interface=wlan1 /ip address add address=10.10.11.0/24 interface=lte1 network=10.10.11.0 /ip dhcp-client add add-default-route=no disabled=no interface=bridge1 /ip dhcp...
by SiB
Fri May 22, 2020 2:59 pm
Forum: RouterOS v7 BETA
Topic: Chateau LTE12 RouterOSv7 beta6 LTE won't connect
Replies: 11
Views: 1691

Re: Chateau LTE12 RouterOSv7 beta6 LTE won't connect

Please activate lte logs at start.
/system logging add topics=lte

Next you can show us export from lte by:
/interface lte export

Documentation: https://wiki.mikrotik.com/wiki/Manual:Interface/LTE
by SiB
Fri May 22, 2020 2:01 pm
Forum: Beginner Basics
Topic: Random connection dropping vol2
Replies: 38
Views: 5368

Re: Random connection dropping vol2

As you notice, SXT who is your router see only DHCP actions, traffic by him etc. but he receive that traffic from any of AP. Only AP can detect and show in logs why the roaming not work, maybe that because MIKROTIK NOT SUPPORT ANY ROAMING at WIFI and you will always be disconnected. Sorry, I not exp...
by SiB
Thu May 21, 2020 2:34 pm
Forum: Beginner Basics
Topic: Random connection dropping vol2
Replies: 38
Views: 5368

Re: Random connection dropping vol2

You have 3x wifi devices, in default configuration all connection to wireless are log into logs and when a wifi-user roam between them he can re-connect.
Maybe you not check the logs at wifi AP but in main SXT, he in logs have got empty logs because he not have wifi radio.
by SiB
Thu May 21, 2020 2:29 pm
Forum: Wireless Networking
Topic: LtAP LTE US Kit attempting management with cAPsMan but no LTE?
Replies: 10
Views: 1455

Re: LtAP LTE US Kit attempting management with cAPsMan but no LTE?

I understand you have that setup, like this: LtAP WAN: lte1 who should be connected as Running and APN settigns should have "Add Defauld Route". At NAT of course SNAT/Masquarade. LtAP LAN: can be setup the dhcp-client but "Add Defauld Route"=no bcs the internet should be grab from lte1 interface ......
by SiB
Thu May 21, 2020 2:10 pm
Forum: Beginner Basics
Topic: Changing Manufacturer and Model Name [SOLVED]
Replies: 8
Views: 1102

Re: Changing Manufacturer and Model Name [SOLVED]

PicNic
cannot edit them.. is there another way?
On some MikroTik lte module works, on some modules not work.

AT*MRD_IMEI=R <- read
AT*MRD_IMEI=D <- delete
AT*MRD_IMEI=W,0,DATE,IMEI <- Write new one, base at first commands
AT*MRD_IMEI=R <- read after change
by SiB
Wed May 20, 2020 12:18 pm
Forum: Beginner Basics
Topic: Random connection dropping vol2
Replies: 38
Views: 5368

Re: Random connection dropping vol2

Now i did notice this morning when i moved from one room to another the connection dropped on the ipad and i was not able to ping 192.168.88.1 (SXT - main router) from the ipad. The isssue lasted for about 1.5minutes and then ping started to work again. Maybe a problem switching from one AP to anot...
by SiB
Wed May 20, 2020 12:02 pm
Forum: General
Topic: RouterOS v7 and Chateau LTE12
Replies: 6
Views: 1416

Re: RouterOS v7 and Chateau LTE12

SiB, that's because there is no miniPCI in there. Two possibility options: You enter into M.2 socket to start new era or Perfect MikroTik New Hiper Super LTE Category devices base at Quactel EG12/18 and EG20 and all in Global version.... and we start became innovative again... You integrated SoC wi...
by SiB
Wed May 20, 2020 12:16 am
Forum: Beginner Basics
Topic: LHG lte6 dns/link issues
Replies: 6
Views: 803

Re: LHG lte6 dns/link issues

I have noticed that under Traffic tx/rx drops appear. Is this something to worry about? I have got 0 here. One suggestion. I have one user case where he have stable internet but all speedtest in DL are flapping from 20-60Mb and we do automatic test to see the progress in time. his result: https://i...
by SiB
Wed May 20, 2020 12:08 am
Forum: Wireless Networking
Topic: SXT LTE6 disconnects every 30 seconds from LTE
Replies: 5
Views: 656

Re: SXT LTE6 disconnects every 30 seconds from LTE

Good!. If you publish new case then add in topic the LTE like now, I monitor all that new case.
by SiB
Wed May 20, 2020 12:06 am
Forum: General
Topic: RouterOS v7 and Chateau LTE12
Replies: 6
Views: 1416

Re: RouterOS v7 and Chateau LTE12

uldis 1. There are total 4 antenna connections for the CAT12 modem and for 2 antenna connections you can change from internal to external antenna - you can configure both antennas connectors separately (which will be external and which internal). For the TX only the main (first) antenna is used - wh...
by SiB
Tue May 19, 2020 8:07 pm
Forum: Wireless Networking
Topic: SXT LTE6 disconnects every 30 seconds from LTE
Replies: 5
Views: 656

Re: SXT LTE6 disconnects every 30 seconds from LTE

you said this is a known bug in v20? How can i check my current modem firmware version? I think I see few that similar cases here at forum and fw v22 fix them. WinBox > Interfaces > LTE tab > lte1 2x LMB > General tab and you can see the r11e-lte6_v??? or check if you have new firmware to upgrade: ...
by SiB
Tue May 19, 2020 4:26 pm
Forum: Scripting
Topic: saving LTE usage data from stats periodically
Replies: 4
Views: 609

Re: saving LTE usage data from stats periodically

Yes, but I dont know the script body/language...

I hope that could be some ready to use written before.
Then learn it.
.
I would like to have possibility to save connections stats after the powering off the router.
What you want exacly, you write general question, I answer you general answer.
by SiB
Tue May 19, 2020 3:30 pm
Forum: General
Topic: Multiple SXT LTE failures (R11e-LTE card)
Replies: 1
Views: 238

Re: Multiple SXT LTE failures (R11e-LTE card)

you can and should write about every that case to support@mikrotik.com - they can do change and discovery why that card is damaged. All LTE devices are warranty fix via MikroTik directly and give that wrong cart to warranty. They should be stable. I remember old post about the waterproof of sxtr.. h...
by SiB
Tue May 19, 2020 3:09 pm
Forum: Wireless Networking
Topic: SXT LTE6 disconnects every 30 seconds from LTE
Replies: 5
Views: 656

Re: SXT LTE6 disconnects every 30 seconds from LTE

lte1: registered home lte1 link up lte1: not registered, state: 0 failed to register on network lte1 link down ...and it repeats... if like bug in modem firmware v20. What modem firmware you have, v20 or v25 ?? . - A user with a similar problem: https://forum.mikrotik.com/viewtopic.php?t=154865 I a...
by SiB
Tue May 19, 2020 2:15 pm
Forum: RouterOS v7 BETA
Topic: RouterOS 7b - LTE modem support?
Replies: 2
Views: 2117

Re: RouterOS 7b - LTE modem support?

I added that question and your port to my Q&A and if some one with that modems ask my help I will try reach you answer. About ROS7b5... with Telit LM940 in MBIM - the at-chat feature not work and you cannot speak with device :( with Telit LM940 in ECM mode works good. support give me info that ros7b...
by SiB
Tue May 19, 2020 2:11 pm
Forum: RouterBOARD hardware
Topic: Dead Port SIM for LTE1 on LtAP [SOLVED]
Replies: 11
Views: 1663

Re: Dead Port SIM for LTE1 on LtAP [SOLVED]

Maybe you should first access the icmp in filter\input chain ?
PS. You can write me to Telegram
by SiB
Tue May 19, 2020 1:52 pm
Forum: Beginner Basics
Topic: R11e-LTE6_V025 firmware very hard to get CA up
Replies: 5
Views: 1955

Re: R11e-LTE6_V025 firmware very hard to get CA up

I add some info. /interface lte at-cat lte1 nput="at*cell=0" sometimes even when you not use Freq/CellLock can fix ca-band faster then other commands. With Freq or Cell Lock it's hard to get CA, not every can do it, it's like case with ISP. Some clue you can get via command: interface lte at-chat 0 ...
by SiB
Mon May 18, 2020 11:51 pm
Forum: Beginner Basics
Topic: LHG lte6 dns/link issues
Replies: 6
Views: 803

Re: LHG lte6 dns/link issues

First please read the https://wiki.mikrotik.com/wiki/Manual:Interface/LTE, part of r11e-lte6 cell lock. Upgrade to v25 can work. Probably to "fix" ca you can type: /interface lte at-chat lte1 input="at*call=0" and below 10s the ca assign, check this. You should could force B3 or B7 by Frequency lock...
by SiB
Mon May 18, 2020 11:46 pm
Forum: Scripting
Topic: saving LTE usage data from stats periodically
Replies: 4
Views: 609

Re: saving LTE usage data from stats periodically

If you can still use the USB port then you can insert usb adapter with SDcard and just use /disk1/directory/file.txt
by SiB
Mon May 18, 2020 11:44 pm
Forum: Wireless Networking
Topic: LtAP LTE US Kit attempting management with cAPsMan but no LTE?
Replies: 10
Views: 1455

Re: LtAP LTE US Kit attempting management with cAPsMan but no LTE?

i have Hex working well, and am trying to add LTE Failover. Connecting LtAP mini i can see the LTE but can not manage in capsman, or missing routing over to working hex?? LTE is running.
LTE Failover... ? What other you have WAN?
Failover is setup in IP>Routes, not in capsman
by SiB
Mon May 18, 2020 11:36 pm
Forum: Beginner Basics
Topic: please Help with Setting up SXT LTE Kit with Vodafone UK
Replies: 3
Views: 739

Re: please Help with Setting up SXT LTE Kit with Vodafone UK

In normal scenario you just receive internet from SXTR now, this means when you mount at final position you grab internet the same way like your PC now, using a DHCP-Client. You main home router should grab/receive internet from SXTR like your PC. Nothing to change. If your both devices are MikroTik...
by SiB
Mon May 18, 2020 11:32 pm
Forum: General
Topic: help script mikrotik sxt lte
Replies: 1
Views: 339

Re: help script mikrotik sxt lte

To many question in this story. First please read the https://wiki.mikrotik.com/wiki/Manual:Interface/LTE, part of r11e-lte6 cell lock. Probably to "fix" ca you can type: /interface lte at-chat lte1 input="at*call=0" and below 10s the ca assign, check this. You should could force B3 or B7 by Frequen...
by SiB
Mon May 18, 2020 11:22 pm
Forum: Beginner Basics
Topic: Performance of MIKROTIK LHG LTE6 kit, RBLHGR&R11e-LTE6
Replies: 1
Views: 261

Re: Performance of MIKROTIK LHG LTE6 kit, RBLHGR&R11e-LTE6

Check distance to bts, max 3-5km ? What signal parameters you have? You should check band by band and record witch one works, it's signal and speedtest. Slow Bands below 1000Mhz are B8/20 Fast are >1000Mhz like B3/1/7 where additional @20Mhz max bandWIDTH is important. Give us parameters. Read first...
by SiB
Mon May 18, 2020 7:04 pm
Forum: RouterBOARD hardware
Topic: Dead Port SIM for LTE1 on LtAP [SOLVED]
Replies: 11
Views: 1663

Re: Dead Port SIM for LTE1 on LtAP [SOLVED]

1. The ping with non-fragment option I do it on the Mikrotik's console to any public IP? Long article I must create.... all that stuff are many times at forum of course. https://forum.mikrotik.com/viewtopic.php?t=130501#p640872 . 2. The packet sniffer that you say is the Torch of LTE interface? The...
by SiB
Mon May 18, 2020 3:23 pm
Forum: RouterBOARD hardware
Topic: Quectel EP06-E and wAP R ac (RBwAPGR-5HacD2HnD)
Replies: 14
Views: 5719

Re: Quectel EP06-E and wAP R ac (RBwAPGR-5HacD2HnD)

How save is OTA (what is your experience with EP06). In my opinion you should power lhgr with UPS before any [ DF | F ]OTA operation and you can risk your own device, I do it ONLY with laptop who have good battery and wwan adapter. If OTA not work you can always use WinLaptop with wwan adapter and ...
by SiB
Mon May 18, 2020 3:12 pm
Forum: Beginner Basics
Topic: R11e-LTE6_V025 firmware very hard to get CA up
Replies: 5
Views: 1955

Re: R11e-LTE6_V025 firmware very hard to get CA up

I actually don't have this issue. I can use cell-lock and get CA without particular issues. Good for you, many person have that problem with v20 and v25 and with some ISP. In my exable with Poland\CyfrowyPolsat the FreqCellLock & CA can works together in v20 after some at+reset, in v25 it's not wor...
by SiB
Sun May 17, 2020 4:13 pm
Forum: Beginner Basics
Topic: Random connection dropping vol2
Replies: 38
Views: 5368

Re: Random connection dropping vol2

no difference
by SiB
Sun May 17, 2020 2:13 am
Forum: Beginner Basics
Topic: LTE Disconnect on SMS Send
Replies: 3
Views: 582

Re: LTE Disconnect on SMS Send

perfect that you enable logs but you must send request to MikroTik Support, not forum.
Create a supout.rif file and send it to support@mikrotik.com
by SiB
Sun May 17, 2020 2:08 am
Forum: RouterBOARD hardware
Topic: R11e-LTE6 modem support DC-HSPA+ ?
Replies: 5
Views: 881

Re: R11e-LTE6 modem support DC-HSPA+ ?

BogaBY
The question remains open, supported or not.
Then write to support@mikrotik.com and after reaching answer please public it here.
by SiB
Sun May 17, 2020 2:06 am
Forum: RouterBOARD hardware
Topic: Dead Port SIM for LTE1 on LtAP [SOLVED]
Replies: 11
Views: 1663

Re: Dead Port SIM for LTE1 on LtAP [SOLVED]

If I see the same problem with the new unit (That I believe that yes) I'm going to write you. Enable lte logs: system logging add topics=lte Enable lte Logger logs: Watch LTE parameters: https://forum.mikrotik.com/viewtopic.php?f=7&t=153622&hilit=watchdog#p768105 As observation: I can see that anyt...
by SiB
Fri May 15, 2020 11:57 pm
Forum: Beginner Basics
Topic: LTE Disconnect on SMS Send
Replies: 3
Views: 582

Re: LTE Disconnect on SMS Send

Sorry but you can only update ros to latest stable/beta (not ROS7..) and activate logs
system logging add topics=lte
and then report problem to support@mikrotik.com with supout.rif because This should be stable just because.
by SiB
Fri May 15, 2020 11:54 pm
Forum: RouterOS v7 BETA
Topic: No LTE interface on SXT LTE 3-7
Replies: 1
Views: 462

Re: No LTE interface on SXT LTE 3-7

You can enable logs... system logging add topics=lte and report to support@mikrotik.com but still ROS7b5 is not proper for LTE stuff. Problems with routings, some modems not support at-chat and you stuck in MBIM mode... not detect correctly devices like yours. Best way, back to v6 and wait for next ...
by SiB
Fri May 15, 2020 11:27 pm
Forum: Beginner Basics
Topic: Help setting up EE 4g. on LHG LTE 4G
Replies: 10
Views: 1876

Re: Help setting up EE 4g. on LHG LTE 4G

remember to activate logs !
/system logging add topics=lte
by SiB
Fri May 15, 2020 11:26 pm
Forum: RouterBOARD hardware
Topic: Quectel EP06-E and wAP R ac (RBwAPGR-5HacD2HnD)
Replies: 14
Views: 5719

Re: Quectel EP06-E and wAP R ac (RBwAPGR-5HacD2HnD)

WeWiNet Questions: What else (via AT command) do I need to config? I have added band configuration already. I give URL to AT commands documentation, you can read it. All important commands are in post, other in documentation, just read it :) SiB Always read AT documentation: https://www.quectel.com/...
by SiB
Fri May 15, 2020 5:14 pm
Forum: Beginner Basics
Topic: Random connection dropping vol2
Replies: 38
Views: 5368

Re: Random connection dropping vol2

This is normal because this discavery is at Layer2 and show real interface, even if he is assign to bridge... look
Image
by SiB
Fri May 15, 2020 1:32 am
Forum: Beginner Basics
Topic: CHATEAU LTE12 and R11e-LTE6 ..passthrough?
Replies: 5
Views: 1894

Re: CHATEAU LTE12 and R11e-LTE6 ..passthrough?

I see that the EM12 has a cell lock AT command, but the EG12 does not report it on the datasheet. It could also be a datasheet from an old version of the firmware, so who knows. I hope Mikrotik thought about it. EP06, EM12, EG12, EG18 ... have got the same at commands and Quactel speak about that "...
by SiB
Fri May 15, 2020 1:22 am
Forum: RouterBOARD hardware
Topic: Latency Spikes/Jitter on R11eLTE6 but not on the R11e4G
Replies: 3
Views: 674

Re: Latency Spikes/Jitter on R11eLTE6 but not on the R11e4G

when you have got the R11e-lte6 with fw v025 then please "reset lte module to default" one only time by: /interface lte at-chat lte1 input="AT+RSTSET" what do internal re-format and this will be like from factory. Do that only one time. Then try do latency tests again. Any know errors in v025? Yes, ...
by SiB
Fri May 15, 2020 12:41 am
Forum: Wireless Networking
Topic: LHG LTE6 kit, in LTE network mode reboots
Replies: 2
Views: 593

Re: LHG LTE6 kit, in LTE network mode reboots

Everything is resolved thanks to a very quick support response, thanks =) The problem was in the faulty power supply VERY GOOD. I add some information. Some ppl insert to LHGR the LM940 etc. and reboot's starts because the Power Adapter is low power and we should use better PoE Adapter to recover s...
by SiB
Fri May 15, 2020 12:36 am
Forum: RouterBOARD hardware
Topic: Dead Port SIM for LTE1 on LtAP [SOLVED]
Replies: 11
Views: 1663

Re: Dead Port SIM for LTE1 on LtAP [SOLVED]

https://i.imgur.com/7BBTrr3.png That INVALID IP should be REMOVE by you and by ROS himself of course too. Edit: After a reboot. LTE2 keeps running but LTE1 no, with same effect on IP addresses. Then, I disabled LTE2, reboot, LTE1 again runs, then enable LTE2 and finally keeps running also. It's too...
by SiB
Fri May 15, 2020 12:21 am
Forum: RouterBOARD hardware
Topic: RBwAPR-2nd w/ R11e-LTE-US [SOLVED]
Replies: 6
Views: 4518

Re: RBwAPR-2nd w/ R11e-LTE-US [SOLVED]

and remember that AT&T can give you a connection but without any internet access. Even can block you sim card if they detect the device who is not phone.
Remember to check your AT&T PLAN !
by SiB
Fri May 15, 2020 12:16 am
Forum: Wireless Networking
Topic: Audience LTE6 kit LTE problem
Replies: 1
Views: 407

Re: Audience LTE6 kit LTE problem

You should disable dhcp-server
Create a dhcp-client go grab your local internet and provide YOUR INTERNET to Audience !

Then the:
interface lte firmware-upgrade lte1 upgrade=yes
should fix your problem.

Check if you have r11e-lte6_v20 or _v25 (latest)
by SiB
Fri May 15, 2020 12:14 am
Forum: RouterBOARD hardware
Topic: No LTE interface when router tethered to Android phone
Replies: 3
Views: 855

Re: No LTE interface when router tethered to Android phone

Latest ROS
port firmware set ignore-directip-modem=no
system reboot

and the lte1 should be show. Of course the dhcp-client should grab addressation.
SomeTimes I do scripts who do every 10s the release until IP will be get from "Android phone"

I hope that help you.
Good Luck!
by SiB
Fri May 15, 2020 12:10 am
Forum: RouterBOARD hardware
Topic: R11e-LTE6 firmware and AT commands doc
Replies: 1
Views: 565

Re: R11e-LTE6 firmware and AT commands doc

Hi Where can I find documentation for the R11e-LTE6 modem? Only at: https://wiki.mikrotik.com/wiki/Manual:Interface/LTE . I can’t find for example changes in the firmware, which has changed for example between the v20 and v25 versions. I found on the forum that version 25 works worse for some https...
by SiB
Fri May 15, 2020 12:02 am
Forum: Beginner Basics
Topic: R11e-LTE6_V025 firmware very hard to get CA up
Replies: 5
Views: 1955

Re: R11e-LTE6_V025 firmware very hard to get CA up

I can confirm that as COMMON BUG in this version. In my personal opinion the best fw what I testing was v24 but this was as release candidate :(.
PLEASE create a support case at support@mikrotik.com and report that ! Only that way you report this problem officially, forum is not important.
by SiB
Thu May 14, 2020 11:58 pm
Forum: Beginner Basics
Topic: CHATEAU LTE12 and R11e-LTE6 ..passthrough?
Replies: 5
Views: 1894

Re: CHATEAU LTE12 and R11e-LTE6 ..passthrough?

Just a quick question here: does the Chateau support cell-lock? https://wiki.mikrotik.com/wiki/Manual:Interface/LTE#Using_Cell_lock R11e-LTE6 supports it but there is no mention for the Chateau. We don't know jet. This device will be in Poland just in this week. Try check about information at: http...
by SiB
Thu May 14, 2020 11:47 pm
Forum: RouterBOARD hardware
Topic: R11e-LTE6 modem support DC-HSPA+ ?
Replies: 5
Views: 881

Re: R11e-LTE6 modem support DC-HSPA+ ?

This modem - R11e-LTE6 support DC-HSPA+ ?
Or any Mikrotik modem - support this technology?
Read documentation, this information exist.
Image
by SiB
Thu May 14, 2020 2:17 am
Forum: Wireless Networking
Topic: mikroTik hAP ac² , 5Ghz Lag Spikes
Replies: 18
Views: 3671

Re: mikroTik hAP ac² , 5Ghz Lag Spikes

btbacon
How did you create these very usefull graphs? I would like to do the same for investigating my WIFI problems. Thanks in advance.
PingPlotter
by SiB
Thu May 14, 2020 2:11 am
Forum: RouterBOARD hardware
Topic: wAP ac LTE6 kit External Antenna
Replies: 7
Views: 1295

Re: wAP ac LTE6 kit External Antenna

HarvSki my external MT LTE antenna to an SXT LTE6 Kit (it's not easy) to see what the performance is like and it's terrible (2-3mbps download), Means, mANT LTE 5o 360° antenna + R11e-LTE6 = 2-3Mbps if I put the R11e-LTE card into the SXT from my old wAP R then I get around 20mbps with the same anten...
by SiB
Thu May 14, 2020 1:35 am
Forum: Scripting
Topic: Mikrotik Bandwidth test scriptting
Replies: 7
Views: 3122

Re: Mikrotik Bandwidth test scriptting

cumhureren thanx for your message but my first code is doing same thing too. i wanna do if bandwidth test result lower then 7 send message to me if not dont send any message But this is so easy, at the end of my script I receive in $Rx the "18M 200K ...." then i select first numbers and compare them...
by SiB
Wed May 13, 2020 11:59 pm
Forum: General
Topic: Feature requests
Replies: 1216
Views: 262587

Re: Feature requests

Add column TYPE who give us a result from :typeof $variable
Image
by SiB
Fri May 08, 2020 5:24 pm
Forum: Beginner Basics
Topic: Random connection dropping vol2
Replies: 38
Views: 5368

Re: Random connection dropping vol2

john231 Or better yet the bridge should have it's own mac address that is unique to the network. True my all bridge interface have got uniq admin mac-address. I generate MAC address by adding new EoIP interface who generate mac-address itself - I not add EoIP, just open form of new tunnel to copy fr...
by SiB
Fri May 08, 2020 3:03 am
Forum: RouterBOARD hardware
Topic: R11e-LTE-US issue in RBM33G
Replies: 7
Views: 2466

Re: R11e-LTE-US issue in RBM33G

if you must buy the r11e-lte or r11e-lte6 then cheaper and works better is EP06-e, my last howto is here: viewtopic.php?f=3&t=150368&p=787894&hil ... +e#p787894
Or just wait to next generation of modules base at eg12/eg16 ... and we don't have idea when it's be
by SiB
Thu May 07, 2020 10:31 am
Forum: Beginner Basics
Topic: Random connection dropping vol2
Replies: 38
Views: 5368

Re: Random connection dropping vol2

and I say one, you do other one.
by SiB
Wed May 06, 2020 7:05 pm
Forum: RouterBOARD hardware
Topic: wAP ac LTE6 kit External Antenna
Replies: 7
Views: 1295

Re: wAP ac LTE6 kit External Antenna

the U.FL to SMA pigtails (ACSMAUFL) 2x u.fl -> SMA female mANT LTE 5o 2x SMA female Conclusion, you have two SMA female and you need the ... 2x https://mikrotik.com/product/smasma "1m SMA male to SMA male cable" Just read documentation. mANT LTE 5o in pdf not have information about male/female but ...
by SiB
Wed May 06, 2020 6:51 pm
Forum: RouterBOARD hardware
Topic: wAP ac LTE kit Ethernet socket problem
Replies: 6
Views: 1040

Re: wAP ac LTE kit Ethernet socket problem

wAP R or wAP R ac <- like in title of post !.
Those are two different devices !.
with a 1m cable and it fails
warranty
by SiB
Wed May 06, 2020 5:46 pm
Forum: RouterBOARD hardware
Topic: wAP ac LTE kit Ethernet socket problem
Replies: 6
Views: 1040

Re: wAP ac LTE kit Ethernet socket problem

-Running PoE from 240v > 24v adaptor All these fail, it's a mechanical fault in the board mounted socket I think and I cannot repair that here. if you grab it from roof to you and power it at 1m PoE 24V and works stable then you know it's not device problem but power. By power at short cable you ca...
by SiB
Wed May 06, 2020 11:09 am
Forum: Beginner Basics
Topic: Random connection dropping vol2
Replies: 38
Views: 5368

Re: Random connection dropping vol2

Watch LTE parameters - LteLogger should show you a change between BTS Band/Cell and many that behavior like * after reboot pings are ok * when I wait ... then can fix itself * I move device position and it's fix can be logged to what cell id you are connect and when all works properly you can do: * ...
by SiB
Wed May 06, 2020 12:03 am
Forum: Beginner Basics
Topic: Help setting up EE 4g. on LHG LTE 4G
Replies: 10
Views: 1876

Re: Help setting up EE 4g. on LHG LTE 4G

You still not connect to ISP !
Image

APN, PIN, credentials ... you sure about them ?
Enable logs topic=lte,
reboot device to grab new logs
in 3minutes uptime do a save logs to file and share them.
/log print file=logs.txt
by SiB
Tue May 05, 2020 8:49 pm
Forum: RouterBOARD hardware
Topic: wAP ac LTE kit Ethernet socket problem
Replies: 6
Views: 1040

Re: wAP ac LTE kit Ethernet socket problem

Maybe just ping the PD and do power reset like https://wiki.mikrotik.com/wiki/Manual:PoE-Out#Power-cycle_settings ? wAPR ac support 802.3af/at and maybe try 48V adapter, and he support the two power source. You not write that situation is resolve after some time and you can grab logs from incident o...
by SiB
Tue May 05, 2020 2:15 pm
Forum: General
Topic: wAP packet drop
Replies: 3
Views: 1668

Re: wAP packet drop

In my example SXTR+R11e-LTE6_fw_v25
Stable connection without packet drop.

I hope next generation of lte modules like eg12/16 etc. be stable with working all feature. But we need new sxtr/lhgr with 1Gb ports, better cpu and m.2 socket and... mimo4.4
by SiB
Tue May 05, 2020 12:09 am
Forum: General
Topic: wAP LTE kit modem missing after reboot
Replies: 2
Views: 667

Re: wAP LTE kit modem missing after reboot

Please enable logs, topic=lte. we should grab logs from good boot, and bad boot. In both scenatrio you should create a supout.rif and send both to support@mikrotik.com becasue your device not work as out-of-box as plug-and-play and that is strange behavior !. /system logging add action=memory prefix...
by SiB
Mon May 04, 2020 11:15 pm
Forum: RouterBOARD hardware
Topic: Huawei Mobile WiFi E5573 LTE modem
Replies: 2
Views: 3043

Re: Huawei Mobile WiFi E5573 LTE modem

that device should be detected as lte1 interface. You can just create dhcp-client at lte1 interface and have hope that you receive addressation - if not then you can enable dhcp logs and grab new supout.rif and send it to support@mikrotik.com . Sorry but at this forum is very small answers about thi...
by SiB
Mon May 04, 2020 12:45 pm
Forum: Beginner Basics
Topic: Help setting up EE 4g. on LHG LTE 4G
Replies: 10
Views: 1876

Re: Help setting up EE 4g. on LHG LTE 4G

FredG
i couldn't see where to add username or password.
Image
by SiB
Mon May 04, 2020 2:20 am
Forum: General
Topic: WAN IP Invalid after reboot
Replies: 3
Views: 860

Re: WAN IP Invalid after reboot

Then next step is just do logging topic=lte and watch results.
Maybe you can disable one lte interface to have more clear logs or just filter logs (new feature in new WinBox).
by SiB
Sun May 03, 2020 11:23 pm
Forum: General
Topic: WAN IP Invalid after reboot
Replies: 3
Views: 860

Re: WAN IP Invalid after reboot

LtAP LTE6 at usb3.0 R11e-4G at usb2.0 If I factory reset the device, enable the 4G chip it will connect to my B43 network once the second LTE interface is added to the WAN. The problem happens if I reboot the board. When it comes back up the configuration remains unchanged but the IP on the B43 int...
by SiB
Sun May 03, 2020 11:02 pm
Forum: RouterBOARD hardware
Topic: Disconnects on LHG LTE6 kit
Replies: 3
Views: 845

Re: Disconnects on LHG LTE6 kit

enable loggins with topic=lte first.
You can additional use netwatch to create new log with information about up/down of access remotly host like 1.1.1.1.
With this two stuff you can start track problems with lte.
by SiB
Sun May 03, 2020 10:58 pm
Forum: RouterBOARD hardware
Topic: LTE Signal indicators
Replies: 1
Views: 638

Re: LTE Signal indicators

I have read on another post that RSSI is not a good indicator was was trying to get the best RSRP. True . The attached screenshot gives me a speedtest result of around 21Mb down which i thought was a bit poor in all fairness. Read documentation at wiki: https://wiki.mikrotik.com/wiki/Manual:Interfa...
by SiB
Sun May 03, 2020 12:14 pm
Forum: Beginner Basics
Topic: R11e-LTE - configuration help
Replies: 5
Views: 2199

Re: R11e-LTE - configuration help

So for CCR and R11e-LTE: 1. setutp through the USB of the CCR1009 works. lte1 come up in the interfeces menu 2. SIM (italian WIND3) connects to its cell and I can see it in th lte1 parameters says also password ok, correct as there should no password for connetion to ISP) Then SIM works and have si...
by SiB
Thu Apr 30, 2020 11:12 am
Forum: General
Topic: LHG LTE router public IP address mismatch
Replies: 4
Views: 1446

Re: LHG LTE router public IP address mismatch

RB receive IP from provider. You can enable lte logs topic=lte and found the IP in logs and track all changes from command "ZGIPDNS". Your ISP as many can show you some Public IP but do NAT and your real external Public IP can be other - those stuff are from IP like other IP for outbound traffic and...
by SiB
Thu Apr 30, 2020 2:31 am
Forum: General
Topic: LTE routerboards
Replies: 1
Views: 1145

Re: LTE routerboards

This is with AT&T in many devices. I have oposite situation, in R11e-LTE6 the broadband and NXTGENPHONE give me internet and works from fist use. LTE module Telit LM940 give me the same problem what you have now. I not found solution, please give feedback if you found it. Calling to AT&T not give me...
by SiB
Thu Apr 30, 2020 2:26 am
Forum: General
Topic: LHG LTE router public IP address mismatch
Replies: 4
Views: 1446

Re: LHG LTE router public IP address mismatch

perhaps because router acquires new public IP address from the network operator. Check the DDNS name is resolved to what IP from mobile phone. Check what "Public IP" you receive from ISP at lte1 interface. Maybe problem is with DDNS, not IP receive from ISP? Show some example. LHG is a wifi device,...
by SiB
Thu Apr 30, 2020 2:20 am
Forum: Wireless Networking
Topic: LtAP LTE kit + CCR1036 via CRS354-48P switch?
Replies: 2
Views: 1178

Re: LtAP LTE kit + CCR1036 via CRS354-48P switch?

Yes, you can, not in one way. LTE devices can give you internet to specific vlan to your CCR and that way you PowerOn and reveive separated stream of internet. LtAP can give internet just because, or you can setup LTE passthough mode, or you can use separate vlan for (mgmt, grab internet from LtAP, ...
by SiB
Thu Apr 30, 2020 2:16 am
Forum: Beginner Basics
Topic: Help setting up EE 4g. on LHG LTE 4G
Replies: 10
Views: 1876

Re: Help setting up EE 4g. on LHG LTE 4G

First, ask ISP what APN must be used. ROS use as defaul APN=internet .
Please discover WinBox, not WebFig.

In default configuration just insert SIM and connected PC should receive internet.
by SiB
Thu Apr 30, 2020 2:13 am
Forum: Beginner Basics
Topic: Cant see LHG LTE6 behind RB951Ui-2nD
Replies: 1
Views: 555

Re: Cant see LHG LTE6 behind RB951Ui-2nD

Just connect PC directly instead RB951 and try WinBox then.
From RB951 not works the Mac-Telnet ?
Image

Next time run RoMON.
by SiB
Thu Apr 30, 2020 12:50 am
Forum: Wireless Networking
Topic: Audience LTE6 Config Problem
Replies: 3
Views: 1756

Re: Audience LTE6 Config Problem

I am trying to setup an Audience LTE6 Kit and it is connected to AT&T here in the US, but the throughput is almost non-existant. I have a Netgear Nighthawk next to it that pulls down 30 + Mbps but the MT is barely getting 1 Mbps at most. I know I must be doing something wrong, but I have no idea wh...
by SiB
Thu Apr 30, 2020 12:47 am
Forum: Wireless Networking
Topic: R11e-LTE6 support for B1+B3 CA? [SOLVED]
Replies: 1
Views: 843

Re: R11e-LTE6 support for B1+B3 CA? [SOLVED]

NO, that LTE mPCIe module cannot do B3+B1 or B1+B7 :(. Only B3+B7.

Of course B3/1/7 + B8/20 works but this is fast&slow game.
by SiB
Thu Apr 30, 2020 12:33 am
Forum: RouterBOARD hardware
Topic: hAP ac3 spotted at FCC
Replies: 23
Views: 6449

Re: hAP ac3 spotted at FCC

This device looks quite redundant when it coexists with Chateau LTE12. What's the difference between those two apart from pci-e slot and lte 6 vs lte 12?... It doesn't seem like difference significant enough to launch new device. Even price difference insignificant 220 vs 230 usd... Chateau is just...
by SiB
Thu Apr 30, 2020 12:22 am
Forum: Wireless Networking
Topic: LTE CAT6 US Version?
Replies: 3
Views: 1701

Re: LTE CAT6 US Version?

EP06-A and EP06-E works greate. Check my post viewtopic.php?f=3&t=150368#p787894 for Freq/Cell Lock and 2CA on it !.

Today news letter give information about "UNII-2 support for the United States and Canada" for mistic new device like "RBwAPGR-5HacD2HnD-US&R11e-LTE6-US"
by SiB
Thu Apr 30, 2020 12:17 am
Forum: Beginner Basics
Topic: LtAP mini LTE factory reset
Replies: 4
Views: 1382

Re: LtAP mini LTE factory reset

Welcome to the club! :-) I too somehow just managed to lock myself out while configuring the firewall! :-) You should create own post :). You should now use Layer2 access via WinBox > Neighbors tab .... or use RoMON... or use Mac-Telnet .... all that because Firewall filters Layer3, not L2 :). Even...
by SiB
Thu Apr 30, 2020 12:14 am
Forum: Beginner Basics
Topic: LtAP mini LTE factory reset
Replies: 4
Views: 1382

Re: LtAP mini LTE factory reset

So, ... Thanks in advance for any advice and have a nice day! https://mikrotik.com/product/ltap_mini#fndtn-downloads > Quick Guide Buttons and jumpers Reset button • Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 second...
by SiB
Thu Apr 30, 2020 12:03 am
Forum: General
Topic: How to adapt dual LTE / DSL balance over day due to COVID home workers (over) loading LTE network
Replies: 5
Views: 1186

Re: How to adapt dual LTE / DSL balance over day due to COVID home workers (over) loading LTE network

In crazy days do a crazy workaround with PoE to get better LTE signal :) like https://i.imgur.com/CvXkT5B.png (photo from shared, shared... FB group and I no possibility to found a source). About QoS... you know that is a problematic in Dynamic WAN interface like lte1. I have the same situation but ...
by SiB
Wed Apr 29, 2020 11:45 pm
Forum: Beginner Basics
Topic: Mikrotik SXT LTE6 LAN Speed Connect up to 300 Mbps in downlink The LAN interface card is only 100Mbs!
Replies: 2
Views: 818

Re: Mikrotik SXT LTE6 LAN Speed Connect up to 300 Mbps in downlink The LAN interface card is only 100Mbs!

Few ppl here do a bonding of ether1 and ether2 and can reach ~190Mb/s DL but this step demands second device.
PS. Good practice will be disable PoE-out at ether2.
by SiB
Wed Apr 29, 2020 11:40 pm
Forum: RouterBOARD hardware
Topic: R11e-LTE6 CA issue
Replies: 5
Views: 1413

Re: R11e-LTE6 CA issue

First, upgrade the modem firmware to v25, checking is via /interface lte firmware-upgrade lte1 upgrade=no ; About 2CA: primary-band: B7@20Mhz earfcn: 3350 phy-cellid: 143 ca-band: B3@20Mhz earfcn: 1650 phy-cellid: 359 You can do a Freq/Band Lock via /interface lte at-chat lte1 input="at*cell=1,3,,33...
by SiB
Wed Apr 29, 2020 5:25 pm
Forum: Beginner Basics
Topic: R11e-LTE - configuration help
Replies: 5
Views: 2199

Re: R11e-LTE - configuration help

Hmm, R11e-LTE with "USB WWAN mPCIe SIM adapter" in CCR maybe not works because you cannot setup in CCR the USB type=mPCIe :( You can connect it to USB OTG cable and check if lte1 interface will show, the Resource>USB will be new usb device. Write your feedback here ! Please read this: https://wiki.m...
by SiB
Wed Apr 29, 2020 12:18 pm
Forum: General
Topic: LTE6 Manual Cell Selection
Replies: 9
Views: 2214

Re: LTE6 Manual Cell Selection

You should do a table comparison... means do a testing in single bands and write results in table. Next I do the same with a 2CA. In 2CA sometimes when I use Freq/Cell Lock to force opposite primary-band vs ca-band the transfers are better. Sometimes I do a car trip with my lte+hAPac²+dc/ac and test...
by SiB
Wed Apr 29, 2020 1:24 am
Forum: General
Topic: Outdoor LTE12
Replies: 6
Views: 1597

Re: Outdoor LTE12

One user with my help have success with Telit LM940 Cat11
Other currently buy Quectel EM12 Cat12 with M.2->mPCIe adapter - I wait until he have got it. This is the same SoC as in Chateau.
by SiB
Wed Apr 29, 2020 1:19 am
Forum: Beginner Basics
Topic: Did I buy the wrong LTE Router?
Replies: 7
Views: 1601

Re: Did I buy the wrong LTE Router?

R11e-LTE
First, upgrade the MODEM FIRMWARE

My list is like this:
  • R11e-lte6 v025 (31.03.2020)
  • R11e-lte MikroTik_CP_2.160.000_v015
  • R11e-lte-4g v9
  • R11e-lte-us v16.02.183961
  • SXT LTE 3-7 |-> chip:2.0 fw:0.1.2.4
by SiB
Wed Apr 29, 2020 1:05 am
Forum: Forwarding Protocols
Topic: Bonding multiple LTE
Replies: 3
Views: 1004

Re: Bonding multiple LTE

yes, you can do.
For example RB with few ISP can do a few separate connection to central point and merge them via ipip+bonding or use ospf etc.

But this is advance topic and you should know ROS well.
by SiB
Wed Apr 29, 2020 12:56 am
Forum: RouterBOARD hardware
Topic: R11e-LTE6 CA issue
Replies: 5
Views: 1413

Re: R11e-LTE6 CA issue

Hi, you should post the "info" feature here when you works at B3 and B7 to see all parameters. I know that B3+B7 can not works when B7 have ~105 and worse RSRP.... You can enable only band=3,7 to try force that. You can do Freq or Cell Lock to force B3 be primary or to B7 be primary. You can do /int...
by SiB
Sat Apr 25, 2020 11:35 pm
Forum: General
Topic: LTE Interface going Stale and Disconnecting
Replies: 7
Views: 2391

Re: LTE Interface going Stale and Disconnecting

What MAC Changes ? At that logs you have only one MAC=22:32:DB:29:93:DD. You see the lte1 interface. You not receive any details from that dhcp ? What status he have? How I can help if I not see what problem is ? If you see many re-connection then try static IP address and routing. Does lte1 is re-c...
by SiB
Sat Apr 25, 2020 11:24 pm
Forum: RouterBOARD hardware
Topic: R11e-LTE only connects to LTE
Replies: 3
Views: 1398

Re: R11e-LTE only connects to LTE

Anybody don't know the details because the vendor not provide us any AT Commands. MikroTik create device and just implement then in they ROS, not additional documentation because that device are only compatible with ROS !. You can first upgrade the modem firmware to v015 from your v010. Do many sing...
by SiB
Fri Apr 24, 2020 2:59 pm
Forum: RouterBOARD hardware
Topic: hEX <-> SXT LTE6 kit
Replies: 3
Views: 1241

Re: hEX <-> SXT LTE6 kit

if I use "Use Peer DNS=no" in hEXs DHCP client, then all my end clients that are connected to hEX will get DNS from hEX, which ignores DNS defined in SXT, right?
Yes.
End-Users receive DNS from DHCP who can provide a PublicIP, RouterIP (who can Pass your ISP DNS...).
by SiB
Thu Apr 23, 2020 12:47 pm
Forum: General
Topic: LTE Interface going Stale and Disconnecting
Replies: 7
Views: 2391

Re: LTE Interface going Stale and Disconnecting

If you detect lte1 interface and this is not stable, then you can only change USB cable, use USB HUB with own Power, test other android phone. We not have a list of compatibility with Android phones, version or hardware list... Remember to got latest ROS v6 like stable channel. Be sure that System >...
by SiB
Thu Apr 23, 2020 12:42 pm
Forum: General
Topic: wAP packet drop
Replies: 3
Views: 1668

Re: wAP packet drop

better signal, more stable connection.
Thinks about connect external LTE mimo antenna.
by SiB
Thu Apr 23, 2020 12:39 pm
Forum: Beginner Basics
Topic: Interface Data Quota
Replies: 21
Views: 11429

Re: Interface Data Quota

2- when the volume is exceeded, the interface is not shut down, instead it's the NAT which gets disabled. This enables the router to still have service 3- the script runs every minute (via scheduler) and reset the firewall counter at midnight, on the 1st of each month. The script logs the NAT disab...
by SiB
Thu Apr 23, 2020 12:24 pm
Forum: Wireless Networking
Topic: Trying to force carrier aggregation between two band 3 masts
Replies: 8
Views: 1831

Re: Trying to force carrier aggregation between two band 3 masts

I add graphical representation: https://i.imgur.com/btKrtj4.png When one band have e.g. 80Mhz BandWidth then this can be div via few ISP... In Poland B3 1800Mhz is div for many ISP and only T-Mobile have 3xBandWidth (10+2+7Mhz) but in reality this is never detected via any LTE modems and only earfcn...
by SiB
Thu Apr 23, 2020 12:08 pm
Forum: RouterBOARD hardware
Topic: LTE - Home Network Setup and Gear
Replies: 5
Views: 1967

Re: LTE - Home Network Setup and Gear

This can be done, what problem you reach becase at 1st post you write few generic question and not write one problem to solve.
I not have CSR but can help with all other stuff.
by SiB
Thu Apr 23, 2020 12:02 pm
Forum: Wireless Networking
Topic: wAP LTE Kit: lte1 interface does not register to austrian A1 network (static ip-APN) [SOLVED]
Replies: 13
Views: 6049

Re: wAP LTE Kit: lte1 interface does not register to austrian A1 network (static ip-APN) [SOLVED]

sometimes help clean a contacts at sim card,
sometime SIM must be replace in ISP to new one (old SIM can be not compatibile)
sometime disable PIN helps.

Enable log-s topic=lte and publish results. Mainly AT+CPIN give OK ?
by SiB
Thu Apr 23, 2020 11:42 am
Forum: Wireless Networking
Topic: RBLHGR&R11e-LTE6 and SMS [SOLVED]
Replies: 5
Views: 1312

Re: RBLHGR&R11e-LTE6 and SMS [SOLVED]

https://wiki.mikrotik.com/wiki/Manual:Tools/Sms I activate Reveive SMS and in inbox see new SMS. I can send SMS via: /tool sms send lte1 phone-number=+48123123123 message="body of sms what I sending" Upgrade modem firmware to v025. If still not works, send request with supout.fir to support@mikrotik...
by SiB
Thu Apr 23, 2020 11:11 am
Forum: Wireless Networking
Topic: R11e-LTE6 connect only 1 antenna
Replies: 1
Views: 1167

Re: R11e-LTE6 connect only 1 antenna

if you connect antenna to Main u.FL then you just have 1/2 speed, no mimo connection.
by SiB
Thu Apr 23, 2020 11:07 am
Forum: Beginner Basics
Topic: Microtik R11e-LTE-US set up
Replies: 8
Views: 8633

Re: Microtik R11e-LTE-US set up

Remember to use office transparent tape with tail to easier plugout sim card
X7v186nynY.png
by SiB
Thu Apr 23, 2020 11:03 am
Forum: RouterBOARD hardware
Topic: R11e-LTE only connects to LTE
Replies: 3
Views: 1398

Re: R11e-LTE only connects to LTE

You should read Luat at commands, install ROS and grab/log the at-commnands who change that stuff.
by SiB
Thu Apr 23, 2020 11:01 am
Forum: Beginner Basics
Topic: MikroTik LtAP LTE6 kit tx and rx rf circuit disabled
Replies: 2
Views: 966

Re: MikroTik LtAP LTE6 kit tx and rx rf circuit disabled

Depends of witch mPCIe you have a LTE module then you should put a SIM cards. Read documentation, Block Diagram!
Disable PIN first for testing.
Enable logs topic=lte and put them hire.
Read LuAT AT Command for testing commands.
by SiB
Thu Apr 23, 2020 10:48 am
Forum: Beginner Basics
Topic: VPNs over LTE
Replies: 1
Views: 823

Re: VPNs over LTE

You can do that VPN connection with one central point who can act as VPN server.
You can do a VLAN-s at some of VPNs to separate one traffic from other.
You can do a firewall rules dedicated to that VPN traffic by separate chain-s with jump action.
by SiB
Thu Apr 23, 2020 10:42 am
Forum: Wireless Networking
Topic: RBLHGR&R11e-LTE6 and SMS [SOLVED]
Replies: 5
Views: 1312

Re: RBLHGR&R11e-LTE6 and SMS [SOLVED]

Works, read a documentation.
I receive SMS and can sent.
by SiB
Thu Apr 23, 2020 10:40 am
Forum: RouterBOARD hardware
Topic: hEX <-> SXT LTE6 kit
Replies: 3
Views: 1241

Re: hEX <-> SXT LTE6 kit

This is possible of course. SXTR can give his ISP IP give to hex OR give internet via NATed network. You try use SXTR with his poe adapter and your laptop, when this works ang give you internet then just re-connect cable to hex post (without poe-out). If you plan poe from hex then give exacly hex mo...
by SiB
Thu Apr 23, 2020 10:33 am
Forum: RouterBOARD hardware
Topic: LTE Speed on weak signal on WAP AC LTE 6
Replies: 9
Views: 2755

Re: LTE Speed on weak signal on WAP AC LTE 6

I am offline by some time... sorry late response.

You can do a speedtest in that 2CA order of force B3 to be the primary-band and do again speedtest.
Sometimes when you revert two bands in 2CA you reach better speed!.
For screenshot it will be:
/interface lte at-chat lte1 input="2,3,,1379,261"
by SiB
Thu Apr 23, 2020 10:27 am
Forum: General
Topic: LTE wAP
Replies: 5
Views: 1949

Re: LTE wAP

What modem exacly you try use?
USB detect 1-1 Android device, not a R11e-LTE or similar MikroTik device.
Give more details about LTE source device.
by SiB
Thu Apr 23, 2020 10:24 am
Forum: Beginner Basics
Topic: LHG 6 LTE - locking cell (edit) [SOLVED]
Replies: 18
Views: 4149

Re: LHG 6 LTE - locking cell (edit) [SOLVED]

THe CCR has only one PCI slot? CCR have NOT a mPCIe with SIM slot bus. Check RBM11G and compare them and you see difference. Read documentation. R11E This is wifi or lte module, witch one exacly SIM goes in it attach to USB correct? Hope RuuterOS sees it ..... https://wiki.mikrotik.com/wiki/Manual:...
by SiB
Thu Apr 23, 2020 3:32 am
Forum: RouterBOARD hardware
Topic: Quectel EP06-E and wAP R ac (RBwAPGR-5HacD2HnD)
Replies: 14
Views: 5719

Re: Quectel EP06-E and wAP R ac (RBwAPGR-5HacD2HnD)

Hello, I add some information about EP06-E module. If you buy it and see the 05c6:9008 QDloader 9008 this means your module is ready to flashing and you must do a flashing to start normal work. You need latest fw: EP06ELAR02A08M4G and QFlash software, your distributor should provide you it. USB WWAN...
by SiB
Mon Apr 06, 2020 3:23 pm
Forum: General
Topic: [R11e-LTE6] - CANNOT upgrade LTE firmware [SOLVED]
Replies: 6
Views: 2480

Re: [R11e-LTE6] - CANNOT upgrade LTE firmware [SOLVED]

I observe that threat and must say that upgrade must be done only via MikroTik Support. Please write to suppport@mikrotik.com or create account at https://help.mikrotik.com/servicedesk . You should have a case already, try find it and send answer at exist ticket. This modem can be upgraded from FILE...
by SiB
Sat Apr 04, 2020 1:52 am
Forum: Beginner Basics
Topic: LHG 6 LTE - locking cell (edit) [SOLVED]
Replies: 18
Views: 4149

Re: LHG 6 LTE - locking cell (edit) [SOLVED]

CCR even if they have mPCIe slot then this not work, because mainboard is not for lte... no sim slot. Or m.2 socket and you use a adapter (he must have got SIM slot) and maybe that way this can work. Or you should use a 12$ WWAN adapter with a USB port and connect it to CCR like any other USB device...
by SiB
Fri Apr 03, 2020 12:35 pm
Forum: General
Topic: LTE wAP
Replies: 5
Views: 1949

Re: LTE wAP

do that and share results /system resource usb print detail /port print detail /port firmware print /interface lte export /system logging add prefix=wAPR__LTE topics=lte do reboot and check if logs have got any lte logs at boot. Run: /log print where topics~"lte" if any entry exist then save to file...
by SiB
Thu Apr 02, 2020 4:08 pm
Forum: RouterBOARD hardware
Topic: SXT enclosure opening tool
Replies: 5
Views: 1957

Re: SXT enclosure opening tool

User Manual say it in proper way.
Movie: https://www.youtube.com/watch?v=WipKUCXQRaw
You can buy the "kit to open smartphone" who is a few size of that plastics elements. Ali and Amaz.. and eBa.. and others have this very cheap.
by SiB
Thu Apr 02, 2020 3:59 pm
Forum: RouterBOARD hardware
Topic: SXTR/LHGR Antenna info
Replies: 1
Views: 1741

Re: SXTR/LHGR Antenna info

I have some casess in ppl when lhgr go to revert direction... B3/1/7 works with tower on forward but Bands 700/900Mhz goes opossite dirrections. This is where realy are a bts on oposite site. All antennas have got "area around" them what can create that situation easier when you are between both tow...
by SiB
Thu Apr 02, 2020 3:19 pm
Forum: Wireless Networking
Topic: Sxt LTE 4g+ Cat6>
Replies: 43
Views: 8606

Re: Sxt LTE 4g+ Cat6>

fixmyline I have an R11e-LTE6, using Vodafone which I have tested broadcasts on band 1, 7 and 20 however R11e-LTE6 use fast bands like B1/3/7 and beetween them only B3+B7 can do 2CA. Archer MR600 use LTE SoC Qualcomm MDM9240 (the same is in Telit LM940) who have got B1+B3 and wining by this with Mik...
by SiB
Thu Apr 02, 2020 1:01 pm
Forum: General
Topic: LTE wAP
Replies: 5
Views: 1949

Re: LTE wAP

You should check the
USB bus detect the LTE module?
lte1 device is detected ?
What status LTE1 interface have got?
You have got a public IP and possibility that someone access your ROS ?

The window with Scan feature is not a proper diagnostic.
by SiB
Thu Apr 02, 2020 11:49 am
Forum: Scripting
Topic: Dual sim. Determine which connection is better?
Replies: 1
Views: 1113

Re: Dual sim. Determine which connection is better?

LtAP mini have one sim slot then lte1 interface, not lte2 but in script you can use always [find]. To properly select a sim you can think about few parameters like ping speedtest bands/width/2CA ISP limit in GB or Mbps via receive SMS from ISP .... etc. Means you can think about many options to dete...
by SiB
Thu Apr 02, 2020 12:16 am
Forum: RouterBOARD hardware
Topic: LTE Speed on weak signal on WAP AC LTE 6
Replies: 9
Views: 2755

Re: LTE Speed on weak signal on WAP AC LTE 6

In your place first what I do.... it's a good scan of my region. When I try found your region from data you provide, at CellMapper.net then I not have any info. You can install CellMapper app, update thanks that app the info about your BTS... some car travel in cov time are not best plan :( but then...
by SiB
Wed Apr 01, 2020 11:43 pm
Forum: Wireless Networking
Topic: Rural outdoor 4G / LTE Setup
Replies: 18
Views: 4687

Re: Rural outdoor 4G / LTE Setup

I have limited knowledge so please be patient.
Please help!
Please not dig very old post.
Create a new one !
by SiB
Wed Apr 01, 2020 12:12 pm
Forum: Wireless Networking
Topic: 4G Link problems, impossible connect if cell lock is used
Replies: 11
Views: 2385

Re: 4G Link problems, impossible connect if cell lock is used

@mkx, Thanks for answer @menego, Please upgrade to v025 and check this B3@20Mhz + B7@20Mhz. I think you can have differ speeds depends from CellLock at B3 vs B7. I have. Check whitch one will be faster and share results in this post. primary-band: B7@20Mhz earfcn: 3350 phy-cellid: 344 ca-band: B3@20...
by SiB
Tue Mar 31, 2020 10:30 pm
Forum: General
Topic: SXT - Private APN Issue
Replies: 1
Views: 958

Re: SXT - Private APN Issue

SXT in general are WiFi devices
SXT LTE 3-7 was a 1st generation LTE devices
SXTR with modem at mPCIe slot like R11e-LTE6 is a current device.

What exactly device you have. I ask because those series have got some difference in setup.

Please activate the lte logs topic=lte. They give you answer.
by SiB
Tue Mar 31, 2020 9:58 pm
Forum: General
Topic: SXT LTE KIT Dual SIM - MT Please clarify.
Replies: 11
Views: 5195

Re: SXT LTE KIT Dual SIM - MT Please clarify.

mikrotiknoobfromeu
How to simply switch between sim A and B manually and permanently? This is a shame documentation does not contain such basic things.
Why you write in 2y old post?
Documentation what you not read: https://wiki.mikrotik.com/wiki/Dual_SIM ... l_settings
by SiB
Tue Mar 31, 2020 2:29 pm
Forum: Wireless Networking
Topic: 4G Link problems, impossible connect if cell lock is used
Replies: 11
Views: 2385

Re: 4G Link problems, impossible connect if cell lock is used

.
firmware v25 is published !
by SiB
Tue Mar 31, 2020 11:55 am
Forum: Wireless Networking
Topic: 4G Link problems, impossible connect if cell lock is used
Replies: 11
Views: 2385

Re: 4G Link problems, impossible connect if cell lock is used

CQI and signals coexist together. I hope speak about this with mkx :) but at forum we not have PM. mkx is a superior person in LTE stuff. CQI give you a proper modulation what with @Mhz width give you maximal theoretical speed at one Band. Cat.6 should do DL+DL means max. theoretical ~120Mbps @16QAM...
by SiB
Mon Mar 30, 2020 10:28 pm
Forum: Wireless Networking
Topic: 4G Link problems, impossible connect if cell lock is used
Replies: 11
Views: 2385

Re: 4G Link problems, impossible connect if cell lock is used

So I got B7@20MHz, B3@20MHz, When I go to test the single band the best is always B7@20MHz. Also I noticed that single B7 is better than B7+anything in CA. Is that possible? Currently yes, I hope that will be much better. In final firmware you should test single Band's and the CA should do DL+DL ag...
by SiB
Mon Mar 30, 2020 1:43 am
Forum: Beginner Basics
Topic: Random connection dropping vol2
Replies: 38
Views: 5368

Re: Random connection dropping vol2

The best way to diagnose this problems is checking log's at device. You you have a downtime problem then you should check if some device not do reboot. Check in AP log-s that mac client have some reconnection or not. check at sxt if insternet that time is active. In my opinion by checking logs you s...
by SiB
Mon Mar 30, 2020 1:30 am
Forum: Beginner Basics
Topic: Mobile devices unusable [SOLVED]
Replies: 3
Views: 2034

Re: Mobile devices unusable [SOLVED]

Probably because they are connected to second switch, they link are still up and that they dhcp expiration leases still not work and they not try refresh dhcp information.
by SiB
Mon Mar 30, 2020 12:09 am
Forum: RouterBOARD hardware
Topic: LTE Speed on weak signal on WAP AC LTE 6
Replies: 9
Views: 2755

Re: LTE Speed on weak signal on WAP AC LTE 6

If you compare i$Phone then be sure you compare with 6 or 6s model, all newer have bigger category then r11e-LTE6. The case similar to you should be: https://forum.mikrotik.com/viewtopic.php?f=2&t=158719 . Please check post with images . You should check at what bands works your phone, what CA, what...
by SiB
Sun Mar 29, 2020 11:44 pm
Forum: RouterBOARD hardware
Topic: wAP LTE kit connecting problem
Replies: 26
Views: 13580

Re: wAP LTE kit connecting problem

derwulz
Did you do an firmware update on built in modem?
My List of official latest version
  • R11e-lte6 v025 (31.03.2020)
  • R11e-lte MikroTik_CP_2.160.000_v015
  • R11e-lte-4g v9
  • R11e-lte-us v16.02.183961
  • SXT LTE 3-7 |-> chip:2.0 fw:0.1.2.4
by SiB
Sun Mar 29, 2020 11:21 pm
Forum: Scripting
Topic: Script enable/disable band 20 Lte
Replies: 2
Views: 1218

Re: Script enable/disable band 20 Lte

You not must do a script's, you can just single command and a System > Scheduler.

Crate a scheduler who at 22:00 will be enable band20 every day and other one at 7:00 who enable Band7. Put this inside scheduler and change band to proper.
/interface lte set lte1 band=7 ;
by SiB
Sun Mar 29, 2020 11:15 pm
Forum: Wireless Networking
Topic: 4G Link problems, impossible connect if cell lock is used
Replies: 11
Views: 2385

Re: 4G Link problems, impossible connect if cell lock is used

menego The cell offer B3, B20 and B7. B1 is shutted off by provider (WINDTRE Italy). I always use only B7 because if I go to CA the performance is a 10% , or more, lower than only B7 alone. You can do only one fast 2CA with B3+B7 OR B20+B1/3/7 who is poor CA. In future that merge/aggregate/sum speed...
by SiB
Sun Mar 29, 2020 10:16 pm
Forum: General
Topic: ** WE WANT A LTE BRIDGE-MODE **
Replies: 82
Views: 26813

Re: ** WE WANT A LTE BRIDGE-MODE **

What is the status?
This is done.
Feature: https://wiki.mikrotik.com/wiki/Manual:I ... gh_Example
List of device who works with this feature: https://wiki.mikrotik.com/wiki/Manual:P ... lar_modems -> "Passthrough support" column
by SiB
Fri Mar 27, 2020 10:45 pm
Forum: Beginner Basics
Topic: LHG 6 LTE - locking cell (edit) [SOLVED]
Replies: 18
Views: 4149

Re: LHG 6 LTE - locking cell (edit) [SOLVED]

Use WinBox 3.22
enable logs with topic=lte
Log - use filters for messages with CREG or $CREG
The last one is phy-cellid in hex. Use Windows Calc (calc.exe) in Programmer mode to enter hex from log and see the proper decimal value.
Image
by SiB
Fri Mar 27, 2020 6:32 pm
Forum: Beginner Basics
Topic: LHG 6 LTE - locking cell (edit) [SOLVED]
Replies: 18
Views: 4149

Re: LHG 6 LTE - locking cell (edit) [SOLVED]

orvis
For which version? The lastest? Isn't any bug which will affect my already poor performance? XD
You are a administrator of your device. You should know all ± of ROS. You can select beta channel or stable. Or even ROS7.
But do a upgrade !
by SiB
Thu Mar 26, 2020 6:15 pm
Forum: Announcements
Topic: Winbox v3.22 released!
Replies: 117
Views: 45066

Re: Winbox v3.22 released!

pe1chl To answer your original remark: you can go to the end of the list by pressing the End key (and to the top by pressing the Home key). But in remains a difficult UI. True. In my Win10 the Home/End not work. Only pressing letter few times do a skip by all that entry with that letter at start. Ma...
by SiB
Thu Mar 26, 2020 3:12 pm
Forum: Announcements
Topic: Winbox v3.22 released!
Replies: 117
Views: 45066

Re: Winbox v3.22 released!

If not checkbox, then the CTRL + Click should on/off options.
Additional should be possible to use Mouse Scrool !.
I do that setup ones what is save in WinBox Session !. I have few sessions dedicate on differ platform/models.
Image
by SiB
Thu Mar 26, 2020 11:28 am
Forum: Beginner Basics
Topic: LHG 6 LTE - locking cell (edit) [SOLVED]
Replies: 18
Views: 4149

Re: LHG 6 LTE - locking cell (edit) [SOLVED]

orvis
Thanks mate but which tab do you have that info?
Update ROS to newer and you see that cell-monitor will be works better and The Cellular tab will be with more details.
by SiB
Wed Mar 25, 2020 11:47 pm
Forum: Wireless Networking
Topic: LTE with A1 Dataguard [SOLVED]
Replies: 9
Views: 2806

Re: [SOLVED ] LTE with A1 Dataguard [SOLVED]

derwulz
Others with same problem - do an OTA update of firmware and you're lucky.
Other have a still v15 as latest. What you mean about OTA ?
by SiB
Wed Mar 25, 2020 11:20 pm
Forum: Announcements
Topic: v6.47beta [testing] is released!
Replies: 269
Views: 116530

Re: v6.47beta [testing] is released!

At ROS 6.47beta49 I press Download in "Check For Updates" and in loop see that:
qcRwlwoD1m.gif
To stop this loop I do:
/system package update cancel

DNS works normal, without DoH, just simple 1.1.1.1,9.9.9.9
by SiB
Wed Mar 25, 2020 1:23 pm
Forum: Beginner Basics
Topic: LHG 6 LTE - locking cell (edit) [SOLVED]
Replies: 18
Views: 4149

Re: LHG 6 LTE - locking cell (edit) [SOLVED]

and if you are connected to proper Tower, then you can read this info just from current connection details in Cellular tab
Image
by SiB
Tue Mar 24, 2020 11:40 pm
Forum: RouterBOARD hardware
Topic: wAP LTE kit connecting problem
Replies: 26
Views: 13580

Re: wAP LTE kit connecting problem

I have a RBWAPR-2ND&R11E-LTE and the LTE connection goes away after a few days for some reasons. It's sound as other case who should own post/thread at forum. Is there any other script to use in netwatch besides complete reboot ? I also tried the LTE DISABLE and LTE ENABLE script, but this let me r...
by SiB
Mon Mar 23, 2020 1:11 pm
Forum: General
Topic: USA AT&T & (lm940 or lte6) and differ IP addressation from ISP
Replies: 1
Views: 831

Re: USA AT&T & (lm940 or lte6) and differ IP addressation from ISP

We receive this message: AT&T Free Msg: It looks like you want to use data but have none available. You may need to add a data package or change to a plan that supports data for your device. To check your plan and manage your account Maybe some one know what this means ? AT&T Support give us info, y...
by SiB
Sun Mar 22, 2020 12:18 pm
Forum: General
Topic: LHG LTE - Bridge mode???
Replies: 25
Views: 4159

Re: LHG LTE - Bridge mode???

labc33 Could you show the step by step configuration in each RB and LHG LTE please ? But this was posted few times . It's just one feature and I'm sure you have problems with other stuff and you think that one feature not wrong you correctly. I think really that I must do one post as living document...
by SiB
Sat Mar 21, 2020 10:18 pm
Forum: General
Topic: USA AT&T & (lm940 or lte6) and differ IP addressation from ISP
Replies: 1
Views: 831

USA AT&T & (lm940 or lte6) and differ IP addressation from ISP

Hello, I help one of the forum user and we reach point what I cannot check easy. Maybe someone have some knowledge with AT&T as ISP and his routing. RBLHGR with ROS 6.47beta35 r11e-LTE6 with default firmware v20 Telit LM940 with AT&T firmware 24.01.5 4 4 (Bold 4 means AT&T internal Firmware). APN: b...
by SiB
Fri Mar 20, 2020 11:53 pm
Forum: General
Topic: RBM33G Slow bandwidth HELP [SOLVED]
Replies: 15
Views: 2869

Re: RBM33G Slow bandwidth HELP [SOLVED]

Italy LTE Band-s and Your ISP
photo6028564973573223021.jpg
by SiB
Fri Mar 20, 2020 1:21 pm
Forum: Announcements
Topic: v6.47beta [testing] is released!
Replies: 269
Views: 116530

Re: v6.47beta [testing] is released!

SXTR brick after upgrade, first reboot. No RoMON. No L2 Neighbors discovery. No MAC ping. I wait to 5 minutes. Cold boot - power off and power on. PS. Please set the notification like before, at all bottom site of window: https://i.imgur.com/jP0okzt.png System > Reboot and... SXTR brick after upgrad...
by SiB
Thu Mar 19, 2020 7:34 pm
Forum: RouterBOARD hardware
Topic: CAT6 LTE T-Mobile bands 2,4,5,12,66,71
Replies: 4
Views: 2038

Re: CAT6 LTE T-Mobile bands 2,4,5,12,66,71

TechShip have got only one who pass your band's and LTE >=6, this is
https://techship.com/products/sierra-wi ... c7411-nam/
by SiB
Thu Mar 19, 2020 3:43 pm
Forum: Beginner Basics
Topic: Mikrotik LTE SXT webserver
Replies: 1
Views: 1115

Re: Mikrotik LTE SXT webserver

The best way is ask ISP about Public IPv4. Maybe it's be a dynamic or static but this way is the best. Other option is to have got other place at internet, with Public IP and connect it with your MikroTik as your vpn client. You must have some place who will be a "connecting hub" for that communicat...
by SiB
Thu Mar 19, 2020 3:29 pm
Forum: RouterBOARD hardware
Topic: CAT6 LTE T-Mobile bands 2,4,5,12,66,71
Replies: 4
Views: 2038

Re: CAT6 LTE T-Mobile bands 2,4,5,12,66,71

EP06-A - without 71
by SiB
Thu Mar 19, 2020 3:26 pm
Forum: RouterBOARD hardware
Topic: wAP LTE kit connecting problem
Replies: 26
Views: 13580

Re: wAP LTE kit connecting problem

My SXTR & r11e-LTE6 in 56s uptime do a at+reset by himself, and other person give confirmation that is done by ROS itself.
This is like a "build-in feature".
by SiB
Thu Mar 19, 2020 10:04 am
Forum: General
Topic: RBM33G Slow bandwidth HELP [SOLVED]
Replies: 15
Views: 2869

Re: RBM33G Slow bandwidth HELP [SOLVED]

How to read results via column
opera_klxpHcj4lP.png
At your screen is only
INTRA - 429 , 1850
by SiB
Wed Mar 18, 2020 11:48 pm
Forum: General
Topic: LTE6 Manual Cell Selection
Replies: 9
Views: 2214

Re: LTE6 Manual Cell Selection

You read a documentation ?
https://wiki.mikrotik.com/wiki/Manual:Interface/LTE

CellLock or CellFreq or just selecting one Band are your solution.
by SiB
Wed Mar 18, 2020 2:41 pm
Forum: Beginner Basics
Topic: LTE "not running" with no internet
Replies: 3
Views: 1368

Re: LTE "not running" with no internet

At start disable the GSM network, the LM940 not support that ! 3G and 4G only are support. ROS command: /interface lte set lte1 network-mode=3g,lte Maybe that ROS try enable GSM=2G who is not supported create you a problem. At LM940 AT command manual I see that commands and Telit post (https://www.t...
by SiB
Wed Mar 18, 2020 1:38 pm
Forum: Useful user articles
Topic: Advanced Routing Failover without Scripting
Replies: 21
Views: 6234

Re: Advanced Routing Failover without Scripting

WiruSSS In case of using another Mikrotik as your router (SXTR only as a modem with passthrough) it's working fine. But I write about other config, without passthrough, directly at RB who have lte1 interface who get IP from ISP you cannot use RecursiveRouting at dynamic interface. This is a case. Yo...
by SiB
Wed Mar 18, 2020 11:53 am
Forum: RouterBOARD hardware
Topic: R11e-LTE-US issue in RBM33G
Replies: 7
Views: 2466

Re: R11e-LTE-US issue in RBM33G

My Mikrotik latest modem firmware list: R11e-lte6 v025 (31.03.2020) R11e-lte MikroTik_CP_2.160.000_v015 R11e-lte-4g v9 R11e-lte-us v16.02.183961 SXT LTE 3-7 |-> chip:2.0 fw:0.1.2.4 https://wiki.mikrotik.com/wiki/Manual:Interface/LTE#Modem_firmware_upgrade but the R11e-LTE and R11e-LTE-US must be upg...
by SiB
Wed Mar 18, 2020 11:42 am
Forum: Beginner Basics
Topic: LTE "not running" with no internet
Replies: 3
Views: 1368

Re: LTE "not running" with no internet

ROS 6.47beta35. LM940 modem. Routerboard RBLHGR. -Registration Status: searching I have found these errors in the log: SMS storage set failed rcvd +CME ERROR: operation not supported I don't know what else to check. Please do reboot wait 2minutes to grab logs Run writing logs to file by: /log print...
by SiB
Wed Mar 18, 2020 12:32 am
Forum: General
Topic: PPP-out1 to LTE.. how to change it?
Replies: 1
Views: 830

Re: PPP-out1 to LTE.. how to change it?

Then you should use a "Forum Search" feature.
Your answers: TELIT LM940 - how to get working?

Other very good know how article is: Quectel EP06-E and wAP R ac (RBwAPGR-5HacD2HnD)
by SiB
Wed Mar 18, 2020 12:27 am
Forum: Beginner Basics
Topic: I need to enter AT commands via serial port and ROS
Replies: 4
Views: 1436

Re: I need to enter AT commands via serial port and ROS

If you have some MikroTik modem's or other who discover as lte1 device then: https://wiki.mikrotik.com/wiki/Manual:Interface/LTE If you see them as port, usb1 device then: https://wiki.mikrotik.com/wiki/Manual:Port and "See More" articles. You read a documentation at all ? You not give any details a...
by SiB
Tue Mar 17, 2020 9:21 pm
Forum: Announcements
Topic: Winbox v3.22 released!
Replies: 117
Views: 45066

Re: Winbox v3.22 released!

emils What's new in v3.22: *) added Legacy Mode (disabled by default) to allow using older, less secure connections to RouterOS older than v6.43; https://i.imgur.com/FLzlSvh.png I still must run WinBox 6.4 for manage old ROS v5.26 who cannot be upgraded to v6.x family. https://i.imgur.com/vZaVNiy.pn...
by SiB
Tue Mar 17, 2020 7:15 pm
Forum: Announcements
Topic: Future of LTE products, user feedback requested
Replies: 138
Views: 40848

Re: Future of LTE products, user feedback requested

Hello, I just turned on LHGR and Qecetel EP06-E and unfortunately I fell, this card didn't work in this Mikrotik, do you have any ideas? Please not spam at every post. I answer you at other answer . Remember that all information about this modem are on Quectel EP06-E and wAP R ac (RBwAPGR-5HacD2HnD)
by SiB
Tue Mar 17, 2020 6:48 pm
Forum: General
Topic: RB953GS-5HnT-RP+R11e-LTE reliability issues
Replies: 5
Views: 1594

Re: RB953GS-5HnT-RP+R11e-LTE reliability issues

arni I fell, this card didn't work in this Mikrotik, do you have any ideas? Try think more and give us more details. First you should creare a new post but you post at two other with "I feel" Not "feel" but give detailed problems, what not work, what work. I will not think for you. At what point you...
by SiB
Tue Mar 17, 2020 10:59 am
Forum: RouterOS v7 BETA
Topic: Feature Request: Fail2Ban
Replies: 3
Views: 2733

Re: Feature Request: Fail2Ban

My post is about general Fail2Ban who can work at any VPN , internal services by Layer3 like SSH, Telnet, Http(s) etc.
ScreenShot is from PPTP as example.

In post I write, scripting is perfect but in ROS 7 we should have build-in Fail2Ban feature.
by SiB
Tue Mar 17, 2020 12:21 am
Forum: General
Topic: RBM33G Slow bandwidth HELP [SOLVED]
Replies: 15
Views: 2869

Re: RBM33G Slow bandwidth HELP [SOLVED]

How read result of your screenshot: https://www.philmug.ph/community/threads/how-to-check-the-active-lte-band-and-carrier-aggregation-status.98720/ My opinion is: iphone connect 2xB3, means 2CA B3+B3. rsrp0 primary-band = -89 rsrp1 ca-band = -95 sinr=18,5 All this means very good cqi but dl_bw=B3@10...
by SiB
Mon Mar 16, 2020 6:53 pm
Forum: RouterOS v7 BETA
Topic: Add support for SSMP
Replies: 2
Views: 1564

Re: Add support for SSMP

protocol like SSMP.
you can write the RFC number or wikipedia URL or stg what can describe that protocol ?
by SiB
Mon Mar 16, 2020 2:28 pm
Forum: General
Topic: Feature requests
Replies: 1216
Views: 262587

Re: Feature requests

To the last 2 answers. In my opinion that changes are good but not must. Proper comments with chain-name with jump action can create a proper tree of action at firewall and this "lock/unlock" is not that necessery. About change in firewall, better will be better note/log a change what we do inside R...
by SiB
Mon Mar 16, 2020 10:16 am
Forum: Wireless Networking
Topic: R11e-LTE firmware bug.
Replies: 21
Views: 6788

Re: R11e-LTE firmware bug.

Cycle on Searching --> Registering --> Denied....
Disable ROAMING and be sure that operator is blank and APN have a proper name.
by SiB
Mon Mar 16, 2020 2:56 am
Forum: Wireless Networking
Topic: R11e-LTE firmware bug.
Replies: 21
Views: 6788

Re: R11e-LTE firmware bug.

Have same issue on WAP LTE kit with EU R11e-LTE "MikroTik_CP_2.160.000_v013" Cycle on Searching --> Registering --> Denied.... wap_lte.jpg Sorry, this model can be upgrade only by itself lte1 with internet on it. Please change the SIM or ISP to get internet connection. You can do the upgrade ROS be...
by SiB
Mon Mar 16, 2020 2:46 am
Forum: General
Topic: RBM33G Slow bandwidth HELP [SOLVED]
Replies: 15
Views: 2869

Re: RBM33G Slow bandwidth HELP [SOLVED]

Also, It would be useful to buy an external LTE antenna with Mimo functionality like this https://www.amazon.it/dp/B01E7CWNSI/ref=cm_sw_r_cp_api_i_NkRBEb35N0XXC ? With all external antenna is one big problem. Any vendor not give a antenna Gain per Band/Freq - this means you not know what Gain you c...
by SiB
Sun Mar 15, 2020 5:24 pm
Forum: General
Topic: RBM33G Slow bandwidth HELP [SOLVED]
Replies: 15
Views: 2869

Re: RBM33G Slow bandwidth HELP [SOLVED]

And one more. In your location you not have Band 7, means you not create a B3+B7 agregation :(. You can do only B3+B20 or B1+B20 - depend that you can reach B1 on other tower. Your Phone maybe can reach agregation like: B3+B3+B20 or B1+B3 or have >Rel.12 means have better modulation and that way bet...
by SiB
Sun Mar 15, 2020 5:11 pm
Forum: General
Topic: RBM33G Slow bandwidth HELP [SOLVED]
Replies: 15
Views: 2869

Re: RBM33G Slow bandwidth HELP [SOLVED]

Ether1,2,3 have the same address because I want the same subnet with DHCP on port 1,2,3 so I bridged the ports Address the BridgeLan, not his child. vlan1 is created at BridgeLan, you should not add the vlan1 as a child=port of bridge. When I say on average my RSRP goes from -80 to -95, i mean that...
by SiB
Sun Mar 15, 2020 4:55 pm
Forum: General
Topic: RBM33G Slow bandwidth HELP [SOLVED]
Replies: 15
Views: 2869

Re: RBM33G Slow bandwidth HELP [SOLVED]

luccio96 Hi everyone, You should add to LAN the vlan1 too. /interface list member add interface=vlan1 list=LAN If you add some bridge port's then you use the bridge itself, you not use the original port's who are not independent anymore. /ip address add address=192.168.1.254/24 interface=bridgeLan O...
by SiB
Sun Mar 15, 2020 4:03 pm
Forum: Wireless Networking
Topic: mANT LTE 5o with Russian cellular networks
Replies: 1
Views: 1301

Re: mANT LTE 5o with Russian cellular networks

Brochure means "699 - 2690 MHz" and "360°" with 5dBi ... without graph of Gain like in sxtr/lhgr. That means this can give or not give some additional dB. No one do any testing per Band 3/1/7 and 8/20 for EMEA of this antena with comparison with sxtr/lhgr - this means we don't know how good/bad it is.
by SiB
Sun Mar 15, 2020 3:59 pm
Forum: Wireless Networking
Topic: WAP LTE kit remote update modem firmware issue
Replies: 1
Views: 1358

Re: WAP LTE kit remote update modem firmware issue

This modem can be upgraded only by itself lte1 connection. You must provide any other sim card who start working with this device. Please be sure you not setup some roaming, select wrong operator name, wrong apn... who can give you this danied status. Remember that proper documentation is here: http...
by SiB
Sun Mar 15, 2020 3:53 pm
Forum: Wireless Networking
Topic: Really disappointed in the lack of support. Evolved 3G Really?
Replies: 14
Views: 4251

Re: Really disappointed in the lack of support. Evolved 3G Really?

8y ago, Poland ISP "Play" start marketing with 3G HSPA+ as "LTE Ready" now "Play" start marketing with 4G LTE-A who use LTE Rel.12 and newer (mimo 4x4, 256qam) as "5G Ready" Other ISP in Poland, the "Orange" some time ago create marketing like where ADSL+ was a "Neostrada Fiber", where typical marke...
by SiB
Sun Mar 15, 2020 11:42 am
Forum: General
Topic: 4G router
Replies: 10
Views: 2540

Re: 4G router

That's absolutely incredible information thank you SiB. Unfortunately I have no experience with mobile networks so this is a steep learning curve (I come from an ethernet background ). That said I have read your post several times and will slowly absorb the information and get to researching more! ...
by SiB
Sat Mar 14, 2020 6:20 pm
Forum: Wireless Networking
Topic: Cat6 LGH LTE Super bad performance
Replies: 34
Views: 6993

Re: Cat6 LGH LTE Super bad performance

If you have a remote MikroTik with better internet speed then you can use a scheduler to do a periodic speedtest and report it into logs.
I use it to see change per hour via any day.
HowTo: viewtopic.php?f=9&t=156579#p777760
results like:
Image
by SiB
Thu Mar 12, 2020 8:57 pm
Forum: Wireless Networking
Topic: Really disappointed in the lack of support. Evolved 3G Really?
Replies: 14
Views: 4251

Re: Really disappointed in the lack of support. Evolved 3G Really?

mkx inteq mkx Actually its the other way around: What is the other way around? The discussion is about 4G LTE not "true" LTE. You wrote: inteq To reiterate what SiB stated: 4G LTE is technically 3G with some magic sprinkled on top. More precisely you can call it 3.95G. And I'm saying your quoted sta...
by SiB
Wed Mar 11, 2020 6:40 pm
Forum: Useful user articles
Topic: Advanced Routing Failover without Scripting
Replies: 21
Views: 6234

Re: Advanced Routing Failover without Scripting

anav Q1. What is the plan when the dst-address does NOT equal a static fixed WANIP, but instead is a dynamic WANIP? You can use the dhcp-client parameters and inside is the script's who can do some additional works. Key work can do the routing filter who can change the Dynamic interface parameter's ...
by SiB
Wed Mar 11, 2020 12:13 pm
Forum: RouterBOARD hardware
Topic: wAP LTE kit connecting problem
Replies: 26
Views: 13580

Re: wAP LTE kit connecting problem

derwulz Same Problem with inital connect, any ideas why this is ? (my workraround, script runs 60sec after boot with LTE disconnect and 30 sec later connect) works fine, but nut a final solution... First, be sure you have latest MODEM firmware v015 at r11e-LTE modem. If it's still exist then write t...
by SiB
Wed Mar 11, 2020 11:13 am
Forum: RouterBOARD hardware
Topic: Mikrotik LTE Hardware .. it's a pain
Replies: 6
Views: 2994

Re: Mikrotik LTE Hardware .. it's a pain

Please be technical. E3272 and E3372 can have original firmware with hi.link or standard modem mode. And the modded firmware who show you more information from current connection and give possibility to work with specific technology 3g/4g or with specific band. mspaint_qARD9Q1oaN.png You should choo...
by SiB
Wed Mar 11, 2020 10:38 am
Forum: Wireless Networking
Topic: LTE with A1 Dataguard [SOLVED]
Replies: 9
Views: 2806

Re: LTE with A1 Dataguard [SOLVED]

You not read documentation: https://wiki.mikrotik.com/wiki/Manual:Interface/LTE#Modem_firmware_upgrade Modem firmware upgrade Starting from RouterOS version 6.44beta20 it is possible to upgrade modems firmware. Firmware update is available only as FOTA Firmware Over The Air - firmware upgrade can on...
by SiB
Wed Mar 11, 2020 2:03 am
Forum: Wireless Networking
Topic: Cat6 LGH LTE Super bad performance
Replies: 34
Views: 6993

Re: Cat6 LGH LTE Super bad performance

floaty !!! B O O Y A C A S H A !!! Please read this one post: https://forum.mikrotik.com/viewtopic.php?f=13&t=158498 With CellLock at this B1 as primary-band you reach better speed. Read part about cell-monitor feature!. Of course proper documentation what you should read first is here: https://wiki...
by SiB
Wed Mar 11, 2020 1:55 am
Forum: Wireless Networking
Topic: LTE with A1 Dataguard [SOLVED]
Replies: 9
Views: 2806

Re: LTE with A1 Dataguard [SOLVED]

I bet you not check this logs in any text compare software. They are the same, only difference are at front. https://i.imgur.com/Mg49AD4.png PLEASE UPGRADE MODEM FIRMWARE to v15 who is LATEST for your modem. I not say/write about ROS version or boot-firmware. This one: /interface lte firmware-upgrad...
by SiB
Tue Mar 10, 2020 11:10 pm
Forum: RouterBOARD hardware
Topic: RBM33G - mPCIe ports
Replies: 8
Views: 3254

Re: RBM33G - mPCIe ports

andryan
Hi, does this mean the sim card slots are not switchable with 1 LTE mini-PCIe?
"switchable " SIM Slot are in SXTR/LtAP/LtAP mini . Not here .
by SiB
Tue Mar 10, 2020 10:47 pm
Forum: Beginner Basics
Topic: SXT-LTE6 - Carrier Aggregation - 3UK
Replies: 5
Views: 2224

Re: SXT-LTE6 - Carrier Aggregation - 3UK

Then please do testing like this. I understand this are steps to resume your situation. Default situation. Disable CellLock & All Bands active (no one selected). /interface lte at-chat lte1 input="at*cell=0" /interface lte set lte1 !band Setup the CellLock into your Band3 (I assume you are in this s...
by SiB
Tue Mar 10, 2020 4:50 pm
Forum: Announcements
Topic: MikroTik newsletter March 2020 (#94)
Replies: 40
Views: 30940

Re: MikroTik newsletter March 2020 (#94)

CRS354-48P-4S+2Q+RM very good. I wait for 48x10GbE Base-T for iSCSI traffic. We need LHGR + R11e-LTE6 with 1GbE port - currently SXTR with bonding have 2xFE but LHGR still have a bottleneck to FE 2CA for 1+3 and 1+7 and 3+7 - currently only 3+7 :( LGHR with corrected 700 and 900Mhz Gain - currently...
by SiB
Tue Mar 10, 2020 10:55 am
Forum: Wireless Networking
Topic: LTE with A1 Dataguard [SOLVED]
Replies: 9
Views: 2806

Re: LTE with A1 Dataguard [SOLVED]

First, give details about modem what you use.
by SiB
Tue Mar 10, 2020 10:52 am
Forum: General
Topic: LtAP problem
Replies: 1
Views: 863

Re: LtAP problem

LtAP or LtAP mini ?
LtAP (not mini) have got two mPCIe slots. One works always in "lte mode" but second must have got change jumper & change usb type feature & isolated usb3.0 connector if he is usb3.0.

Give more details.
by SiB
Tue Mar 10, 2020 10:49 am
Forum: RouterBOARD hardware
Topic: LTE modem not showing if wlan interface enabled
Replies: 3
Views: 2100

Re: LTE modem not showing if wlan interface enabled

Strange. Please upgrade ROS firmware with boot-firmware to latest from stable or testing channel and test again. You use one or more modems via USB HUB? This is directly connected modem or it's like USB WWAN adapter for m.2/mPCIe modem ? In this scenario you must change USB type feature. Give more d...
by SiB
Tue Mar 10, 2020 12:49 am
Forum: RouterBOARD hardware
Topic: compatible LTE mini pci-e cards?
Replies: 12
Views: 3840

Re: compatible LTE mini pci-e cards?

syadnom
now it shows up.
Perfect!.
If you can give screenshot from Cellular tab then I will be happy to check what MikroTik assign from that modem. Sometimes SNR/CQI not show or feature is minimal and Cellular tab is empty.
by SiB
Tue Mar 10, 2020 12:09 am
Forum: RouterBOARD hardware
Topic: compatible LTE mini pci-e cards?
Replies: 12
Views: 3840

Re: compatible LTE mini pci-e cards?

syadnom I've ran through these posts and was able to enter the AT command at+qcfg="usbnet",1, but the modem doesn't show up in LTE interfaces after that either. I can dial via ppp, but it's not in LTE interfaces. Any idea for a next step? First, upgrade ROS to latest stable or testing channel. In ol...
by SiB
Mon Mar 09, 2020 9:48 pm
Forum: RouterBOARD hardware
Topic: compatible LTE mini pci-e cards?
Replies: 12
Views: 3840

Re: compatible LTE mini pci-e cards?

syadnom I picked up one of these cards, swapped it for an R11e-LTE-US model and it's not recognized by routeros... Please read this: https://forum.mikrotik.com/viewtopic.php?f=7&t=150149 about ECM mode and post feedback if this give you success or not. Of course please upgrade ROS to stable or beta ...
by SiB
Mon Mar 09, 2020 9:00 pm
Forum: Beginner Basics
Topic: SXT-LTE6 - Carrier Aggregation - 3UK
Replies: 5
Views: 2224

Re: SXT-LTE6 - Carrier Aggregation - 3UK

If I do CellLock to Band3, i dont get Band20 as CA. This evening I will : 1. connecting to different cell id of B3 this evening to see if 2. Tick all the boxes of different bands As you mention the r11e-lte6 is having some problems - can you please advise what these are, just to be aware. I face ra...
by SiB
Mon Mar 09, 2020 3:12 pm
Forum: Beginner Basics
Topic: SXT-LTE6 - Carrier Aggregation - 3UK
Replies: 5
Views: 2224

Re: SXT-LTE6 - Carrier Aggregation - 3UK

I use 3 UK SIM in this box. Now, i can see the router be default take Band20 as primary band and Band1 as CA. When i try to fix Band1 as primary band, then CA doesnt come up. Probably you select one Band=1 and then other are not existing. Then only B1+B1 can be possibly but it depend's from ISP and...
by SiB
Mon Mar 09, 2020 1:49 pm
Forum: Beginner Basics
Topic: Unable to connect to SXT-LTE6 [SOLVED]
Replies: 11
Views: 3630

Re: Unable to connect to SXT-LTE6 [SOLVED]

Have another query on Carrier Aggregation- will start a new thread.
Give here a URL to new post.
Or write question here. Other person not write in this post then we can continue.
by SiB
Mon Mar 09, 2020 6:02 am
Forum: Wireless Networking
Topic: In Search of an multi-LTE Modem Router Combo
Replies: 1
Views: 1925

Re: In Search of an multi-LTE Modem Router Combo

First, Install at mobile the CellMapper and check what Band it detect at your area and with your ISP. Check website of CellMapper, the MAP and what Band your ISP use. Next is check that modem's supported Band's and then you can thinking about what RouterBoard use with modem. I think the MikroTik not...
by SiB
Mon Mar 09, 2020 5:57 am
Forum: Wireless Networking
Topic: MikroTik wAP ac LTE6 kit - Is it possible to replace an R11e-LTE6 modem with an R11e-LTE?
Replies: 2
Views: 2070

Re: MikroTik wAP ac LTE6 kit - Is it possible to replace an R11e-LTE6 modem with an R11e-LTE?

Is it possible to replace an R11e-LTE6 modem with an R11e-LTE? Functionally and performance will not be affected? You can. Remember that you think about doint change from Cat.6 to Cat.4 device then the performance means speed/stability will be worse. You can buy RB without modem or/and modem itself...
by SiB
Mon Mar 09, 2020 5:52 am
Forum: General
Topic: LTE reply timeout for: AT E0 V1 - V6.41rc56
Replies: 3
Views: 3285

Re: LTE reply timeout for: AT E0 V1 - V6.41rc56

owent04r
hope this helps
Answering to 2 years case you should mention about upgrade the ROS version with boot-firmware and then upgrade modem-firmware.
BR
Marcin Przysowa
by SiB
Sun Mar 08, 2020 9:54 pm
Forum: Beginner Basics
Topic: IPSEC problems over 4G
Replies: 5
Views: 2279

Re: IPSEC problems over 4G

I not understand one stuff. Now you write that you see at MikroTik (vpn server) the traffic inside firewall in&out. but before you write "Tunnel is established, I see policy on router, but packets do not flow, VPN actually do not working." and this is strange. If ISP change the "outgoing" IP then yo...
by SiB
Sun Mar 08, 2020 9:37 pm
Forum: Wireless Networking
Topic: Looking for video tutorial on LHG LTE6 set up
Replies: 6
Views: 2439

Re: Looking for video tutorial on LHG LTE6 set up

Gigair Which is why the APN is set to broadband. That is AT&T's I use google to search information and, The https://www.4gapn.com/us/en/att give info:: ISP: | us United States | AT&T Wireless Inc. | APN: NXTGENPHONE or phone or broadband NXTGENPHONE <- unlocked non AT&T devices 4G phone <- phones f...
by SiB
Sun Mar 08, 2020 9:14 pm
Forum: Wireless Networking
Topic: Cat6 LGH LTE Super bad performance
Replies: 34
Views: 6993

Re: Cat6 LGH LTE Super bad performance

Gigair 1- Erratic signal. From full strength to 1 bar.... It's all over the place and I am barely over a mile away. You should enable script's to monitor the change of eNB/CellID etc. in time to discover what change that your signal is change rapid. I assume that the change of Band happend and diff...
by SiB
Sun Mar 08, 2020 8:57 pm
Forum: Wireless Networking
Topic: Really disappointed in the lack of support. Evolved 3G Really?
Replies: 14
Views: 4251

Re: Really disappointed in the lack of support. Evolved 3G Really?

-I have called the people we purchased from. Check if they are at Distribution list: https://mikrotik.com/buy and if they a proper distributor then they give you support and warranty. . -I have started threads to try to verify everything before purchasing. ? means some post at forum? I don't know w...
by SiB
Sun Mar 08, 2020 2:21 pm
Forum: General
Topic: LtAP mini series LTE missing.
Replies: 10
Views: 2728

Re: LtAP mini series LTE missing.

At your place I will use warranty and turned this device. Modem should be works out-of-box and only APN can not give automatical connectivity with internet but the devices is not work properly for you !. But you can do few commands only # Reset to FactorySetting by: /system reset-configuration skip-...