Hi, I have many LHG 60G kits as a ptp links with various range deployed. I have never bothered about upgrading them much often as our routers, so they basically all stayed at MT version 6.47.7 and factory FW 6.42.1. Few days ago I have upgraded all links one by one both MT and FW version 6.49.11 and...

We are also in random reboots club. Device rebooted after 16 days 21 hours 34 minutes 24 seconds.
We have no software queue, only HW queues. Simple NAT router with one 10g trunk interface. Nothing fancy. Angry as hell.

You guys scare me. I need to replace our IGW router which is smt like 4-core ivy bridge core i7. It had a freeze a week ago, the first and only in like 7 years. So I bought CCR2004-1g-12s-x2xs as a replacement. Should I not even try to deploy it ? Some of you stated that not all units are freezing a...

Thanks to everybody for their experience. I have updated code of our intranet system to first fetch actual IP filter state and to deploy/remove only the difference entries. And when I would globally disable/enable the filter the API client would only enable/disable the last DROP entry. This would mi...

We are small community ISP and have one central router on Mikrotik in use as an internet gateway. We have about 200 internet users and system which automatically checks and updates firewall every day according to bank account payments. About 15 years ago we started with some routerboard which had it...

No need for server hardware, a RB1100AHx2 or CCR1009 will provide same if not better service for a fraction of the PC hardware cost with higher ethernet port count, and much, much lower power consumption. We rotate IP filters every day on main router and when we used backup RB for several day, half...

ROS. The 10g nic upgrade is not a must for now right now. It's more like a nice to have feature to keep entertained :) We have bought some Intel X520-DA1 before which should have support.

Does RouterOS effectively use x86 multicpu on routing / filtering ? If 20% of cpu is used, is it that 80% is free or it's in fact only 5% on 4-core CPU ? ROS generally spreads tasks across available CPU cores with a few limitations (e.g. BGP updates will only happen on single CPU; packets belonging...

Hi, we are using RouterOS for x86 as our main router with NAT and IP filtering / accounting. It's some kind of intel Core gen2 with 4cores and 2,5Ghz base clock as reported in routeros resources. The CPU load is between 10-20%. Currently we have about 500Mbit WAN speed and the router is also routing...

For those who are using old good routeros_api.class.php from Denis Basta. The urls are no longer active. The needed changes to make it work again with new /login

https://github.com/Ftelf/netprovider-ne ... 73647463b3

RB2011 does not work with SUA1500RMI2U anyway. The RB keeps rebooting itself every few minutes when connected by USB. Other UPS works fine, like CP900EPFCLCD which was really surprising. The SUA1500RMI2U is also OK when connected into PC.

Should UP this thread because of core feature lack. Still almost no SNMP in ROS?

Two years later, still nothing ?

I have just replaced our router based on debial squeeze by mikrotik x86 on v6rc3. Because I do not want to have web server and router combined, so I decided to have bare router and separate app server. After few hours the DNS server at mikrotik stopped working. It do not replies to dns requests anym...

I would like also to vote for adding following oids.
rx-ccq
tx-ccq
signal-to-noise

Thanks. Maybe sometime in the far future

The board probably upgraded fine. Some series of boards had issues with 4.15-4.17 I believe where they wouldn't always shut down properly upon a reboot, so require a power cycle when they don't come back. Get someone to power cycle it physically and it should come back up with 5.2 installed. Yea, y...

did the routerboard stop working, or the cacti graphs stopped working ? Nope, lets better clarify. At first I upgraded to 4.17 few days ago. Than I found out that some of our cacti graphs stopped working. I didn't want to downgrade so I tried upgrate to 5.2. After reboot the RB is no longer availab...

I made a biggest mistake ever. Tried to upgrade a perfectly working RB433AH on distant node from 4.17 to 5.2 because of some reason after upgrading to 4.17 our cacti wireless signal graphs stopped working. The node is pretty far. Is this some common issue or just mine ? Does any experienced the same...

Hello, maybe I have the very same problem. Here is my story. I'm looking for solution how to upgrade one old 600m long ptp lint with mikrotik+802.11n bridge. Current hardware is old RB532A with .11a turbo. The real throughput is 32Mbps+. I always use bridge ptp links as there are routers at the node...

Hi, I can confirm that your implementation of read method runs very nice. The original wiki code was buggy, some commands does not executes at all. I used moly's fix http://forum.mikrotik.com/viewtopic.php?f=9&t=28681&p=143426#p143426. But it locks for few seconds on every command. With this...

Hi, thanks for your fix for php read method. Right now I found out that there is some performance issues that some of you may also have. It seems that certain commnans are very slow due to attempt to fread where there is no data. /ip/firewall/filter/add=chain=FILTER-IN=dst-address=10.154.114.229=act...

I have switched linux router to RB433AH because of router maintanance. Router is setted for one interface with 7 vlans. After switch to rb, maximum speed is very slow. Maximum about 7mbit for aggregate trunk. Doesn't matter which vlan traffic flows. It is very strange, CPU is under 5% utilization, n...

Hi, I have 2 RB532As running 2.9.34. If i try to overclock any of them, they jump fine to 330MHz (tried both BIOS and Console) but reset either after a short time or after powercycling/reboot. In BIOS i can see it sets 330MHz as safe frequency even after reboot/powercycling, but never keeps it even...

...

This is website of one of czech mikrotik distributor. I am not really even think about buying rb153. CPUs runs on 100%, so overloading of rx amplifier should not be issue of low bandwidth in this particular test.

On ptp links I always use rb532 because speed is important. In fact I dont see any point why they developed rb153 using so slow cpu. It cant even drive effectivelly one atheros minipci, but they put 3 minipci slots and 5 ethernets. Look at these test http://www.i4shop.net/cz/iObchod/WebInfo.asp?Id=1...

I setted RB112 to 200Mhz by adding 1khz resistor to R7 position and jumper on JP7. Works fine

Which transfer did you reach?

Cant remember exactly, but it was about 14% increase.
Same graduality as on RB532.

I setted RB112 to 200Mhz by adding 1khz resistor to R7 position and jumper on JP7. Works fine

So, I had to test this myself and here is result. I can't use this configuration because of two reasons. 1. In nstream dual, you can't use wds. Wireless bridge is impossible. router - RB532 - wireless - RB532 - router I tried to avoid this by routing, but mikrotik has so shitty ospf implementation, ...

We bridge backhauls running the Nstreme2 protocol by placing one end into mode=bridge and the other end into mode=station-wds and configuring a wds interface on the mode=bridge side (you could also set up dynamic wds, but we run static). Then place the wds interface into the bridge on the mode=brid...

Anyone using this configuration in 5Ghz band ? I would like to use it, but I am not quite sure about interference from splitter. I cannot use two antennas for RX and TX, so I plan to use splitter instead. /--CM9--\ RB532 splitter --- antenna ------- same on the other side \--CM9--/

no, on wireless it's more like 50-60 can you please describe your configuration. I would like to know how much RB532 can handle on one wireless link in bridge mode with Super A and Turbo enabled. Optionally how high can be aggregated speed over all installed wifi cards that board can handle. With s...