I've been banging my head around this issue for over two weeks and the rule that made the difference was this one /routing rule add action=lookup-only-in-table src-address=IP-of-WAN-2 table=To-WAN2 { ensures if both WANs are up, that a handshake on WG2 will go back out WAN2 } Interesting enough, Ope...

Found a previous post on this forum that I didn't found the first and that solves my problem, you may find it here

http://forum.mikrotik.com/viewtopic.php?t=43852

I've been going around your answer and can't wrap my head around it, specially your example - Does your router has multiple networks? (192.168.0.0/24 and 172.17.0.0/16) - Do this rule replace the normal masquerade rules already in place like the following chain=srcnat action=masquerade out-interface...

Hello everybody I have a question related to mangle rules and Dual Wan, let me describe you my scenario: Currently I have a CR125-24G-15-RM, ports ether1 and ether2 are WAN however I do not need balance or failover, I just need to be able to access the router on WAN2 (ether2) and let people connect ...

Hi chechito, thanks for answering, let me respond to your questions individually what do you mean with "hibrid ports"?? I mean Hybrid ports as stated on the wiki "Vlans on Mikrotik environment" on this URL http://wiki.mikrotik.com/wiki/Vlans_on_Mikrotik_environment and specifical...

Hello all I'm trying to setup a Mikrotik RB951G-2HnD with hybrid ports, I'm almost there but I've got a couple of questions about prioritization Scenario is as follows - ether1 will be gateway - All other ethernet ports will be used to connect either PCs or VLAN capable devices (hybrid ports) I've s...

RB2011 has external antennas via two MMCX connectors. There is a device for every purpose. Thank you very much normis, that's actually a very good choice, but for some of my current needs I guess that an RB751/951 with antennas is still a better choice, let me explain why I feel this way: Here in m...

Inox : Of course, I can do that and also void warranty on the process, not an option when used commercially and when you need several of this devices I see Mikrotik as a quality product, as such modifying the device is very bad thing to do, if I wished a custom device I'd rather use a device I coul...

Was about to buy two RB751 because of external antennas, since this model replaces it, then I should look for other brands.

PLEASE MIKROTIK, put antenna connectors on this devices, adding $10 - $15 dollars to price for external antennas is no that much

could you show me the ppp client general tab and ppp tab, thanks. Sure!! As a matter of fact I'm posting this using the very same card Please make sure you're using the right APN, a few days ago I was setting up another Mikrotik for a customer and all connections were dropped, after a couple hours ...

@hendracengala

Absolutely, it's working great, please notice that at some point I saw somewhere that it is preferable to have PIN disabled on SIM

UPDATE: Please note that since Router OS update v6.0 Huawei E173s-6 is in fact supported

ronniee: Have you tried updating your router OS?

RB951G-2HnD is Awesome! Mine works great and has great WiFi capabilities, this is almost the perfect router for my work needs as I have to switch between the RB751U-2HnD and the RB951G-2HnD for some projects. The RB751U-2HnD has an antenna connector, in my country most wall are made of concrete (yes...

Hi @ckwilcox, this is the list I was referring: http://wiki.mikrotik.com/wiki/Supported_Hardware Since I need many of this adapters ASAP I've been looking for them online and asking questions around about compatibility and then checking against the forum (this forum) as the list above is way too gen...

Ok, tried again with another E173, this time with the E173u-6 and it worked immediately

Huawei model E173s-6 is NOT supported by Mikrotik at the moment of this writing (v5.23)

How do I inform the people behind the compatibility list about this?

I'm trying to configure a connection using an RB751U-2HnD with an USB Huawei 3G card model E173s-6 (listed on the supported hardware list) the problem is that I don't get any ports for it: [admin@MikroTik] > system resource usb print # DEVICE VENDOR NAME SPEED 0 1:1 RB400 EHCI 480 Mbps 1 1:3 HUAWEI ...

Thank you very much Andriys, that did the trick, Just to explain a little further in case some one else has my problem I had the following setup On the server side I had the following network on the LAN side: 192.168.203.0/24 On the client side I had this network on the LAN side: 192.168.88.0/24 So ...

As far as I could see GRE cannot be used since it requires both ends to have public IP addresses, remember one of my sides has a Private+Dynamic IP address.

I'm gonna try manual SA as it seems the problem is there, will be back if it works

One question about GRE: Client side has a Dynamic private IP address and nothing can be done about that (ISP doesn't provide Public IP address for that end) can I still use GRE?

Ok, I may try that, but in the meantime I've noticed that the client doesn't installs any SAs until one packet travels from client to server

Hello all I have this little problem I've been unable to resolve: I have this scenario where two Mikrotiks are connected using an L2TP + IPSec VPN, everything is working fine but one thing: From the "server" side of the VPN (being it the LAN of the server or the SERVER Mikrotik itself) I'm...