Hi. It's work for bonding wan interfaces, but not work for lan bonding interfaces.
On lan interfaces many vlans. May be it is reason?

Server in production, therefore i specify all the points. Thank you, friend!

use bond interface with balance-rr and no configuration on the switch. lacp never exceeds the traffic speed of the interface. you can't get over 1g no matter how many interfaces you bond, but you can get more times 1g at the same time for different hosts. it's just the way lacp works. wow! Thanks. ...

Loading diverges by ports, but never exceeds 1Gbps. /interface monitor-traffic ether5,ether6,bonding2 name: ether5 ether6 bonding2 rx-packets-per-second: 8 021 9 646 17 665 rx-bits-per-second: 9.9Mbps 9.6Mbps 19.6Mbps fp-rx-packets-per-second: 8 021 9 646 17 600 fp-rx-bits-per-second: 9.9Mbps 9.6Mbp...

I create dlink lacp and mikrotik bonding/ Dlink 7-8 ports: # LACP config link_aggregation algorithm mac_source_dest create link_aggregation group_id 1 type lacp config link_aggregation group_id 1 master_port 19 ports 19-20 state enable create link_aggregation group_id 2 type lacp config link_aggrega...

4 years ago I blocked on L2 ACL (dlink) virus ports including 5000 =)

Hi! My ISP set shaper on 300 Mbit/s. But my x86 router on ROS v 5.26 shape traffic on 150 Mbit/s. I sent ticket to my ISP and he said that the problem I have. Why is that there can be such a problem? two identical network cards http://img.ii4.ru/images/2015/12/23/665951_Snimok_ikrana_ot_2015_12_23_1...

The problem is solved.

when I telnet to 5000 port, filter counter is 0


when I telnet to 23 port, filter counter > 0

Then I suggest that you double-check your filter and NAT rules, and possibly try disabling UPnP on your router to see if that helps. EDIT (I just re-read the original post and see that upnp is already off - still check the filter / nat rules for that port, though) http://img.ii4.ru/images/2015/12/1...

Then I suggest that you double-check your filter and NAT rules, and possibly try disabling UPnP on your router to see if that helps. EDIT (I just re-read the original post and see that upnp is already off - still check the filter / nat rules for that port, though) Oops. I connect from Debian and XP...

The /16 sounds wrong. This means that 192.168.*.* is a big, flat, single network with no routing between any two hosts having IP address starting with 192.168....... There's nothing technically wrong with this configuration, but if it's not what you expected, then that could be part of the issue, e...

2 any networks have identity problem. My IP is 192.168.200.8/16 Mikrotik LAN router 192.168.100.254/16 Host to telnet is 81.163.163.73 port 5000 (icmp disable.) Half of my friends can connect, other half can not. Why? strangely. In firewall no rules for 5000 port or dst address. >>>when you try to t...

I have not connect to 5000 port over mikrotik.
I telnet to xx.xx.xx.xx:5000.
If I change remote service to 5001 port it's connect ok.

Why mikrotik not forward 5000 port?

On router configured src-nat.
UPnP is off.

I have the same error.
How to fix?

snmp on this devices work.

Part of diveces not resolving data on snmp, but device is currently work. And this device not auto discover switch and router services, at the same time all properly devices show this service. screens: http://img.ii4.ru/thumbs/2013/12/02/438202_Snimok_ikrana_02_12_2013_10_15_54.png Reinstall The Dud...

Please, help me.

post your mangle rules... One of mangle rules 41 ;;; list_1_1_up chain=forward action=mark-packet new-packet-mark=mark_1_up passthrough=no src-address-list=list_1_1 42 ;;; list_1_1_down chain=forward action=mark-packet new-packet-mark=mark_1_down passthrough=no dst-address-list=list_1_1

I use global_out for total_upload and total_download
Is that correct?

I learned that you can use local interface for total_download and WAN interface for total_upload
As correctly?



Sorry, for my English.

I need to have a working station was only a public ip address.
Thanks.

Thank you.
But I want to use NAT and at the same time give the public ip to one device

Heeeeeeeeeeeeelp!

Help me please!

Have LAN address: 192.168.0.0/16 We have AS and the address pool: xxx.234.147.0/24 Configured bgp. Configured dst-nat. Everything works. But there is one problem. We need to give the local device IP Address from xxx.234.147.0/24. for example xxx.234.147.12 How to set it up? Sorry for my English.

For shaper I should use simple queue, and for QoS by traffic type I should use queue tree?
But I known a simple queue not effected and more use mikrotik resources.

QoS configured. Everything works. I need to work shaper for each user individually. For example. There is an Internet channel 100 Mbit / s. Each user speed of 1 Mbit / s. Each user can not take the bandwidth of more than 1 Mbit / s. For each user should run qoS. How to do it? Sorry for my English. h...

The problem is reflected in the screenshot.
Rb750gl device stops responding to ping for a short time. But the devices are working correctly after routerboard.

After upgrade firmware I have this problem:


I need help, please.

Sorry for my English.

All devices after routerboard work properly.