no use

ok. I have disabled snmp but i don't know if the problem is from there. The router work perfect (with one core going down and up to 100% because routing does not work multicore) but after 1 day or 2 it is stucked to 100 % and in routing menus i cannot see anything anymore. I had to reboot the router...

Hi
I have problems with full bgp routing in CCR1016 . Once in 1 or 2 days bgp crashes and one cpu stays stuck at 100%. It did't shows me anything in routing menu. I've send 2 support.rif but no answers yet.
Thanks,
Andrew

strange.. I had Mar/26/2013 16:36:39 .. and download it today.. Yes. It's 16:36. My mistake. Management problem seems to be solved for me. I still have 10:49 version and cpus are loaded a little more then before (but maybe now they are showing the reality). I will try tonight 16:36 version if every...

I had 200mbit of traffic and everything is ok..

latuannetnam Do you update firmware to 3.05 ?

Do you have March 26 , 5:18PM version or 10:49 ?

here it is: http://www.mikrotik.com/download/share/routeros-tile-6.0rc12.npk This version looks fine untill now. I saw also in profile that one process call flash eats permanently about 5 % of one core. I did't see that process untill now. It is normal? It could be from debug package i did't uninst...

here it is: http://www.mikrotik.com/download/share/routeros-tile-6.0rc12.npk This version looks fine untill now. I saw also in profile that one process call flash eats permanently about 5 % of one core. I did't see that process untill now. It is normal? It could be from debug package i did't uninst...

We have fixed the management CPU usage problem, and NAND read only issue. New test build will be uploaded in 10 minutes.

Good news

Can any of you provide us remote access to a router with this issue, especially where management eats more than one core to 100% ? Email support please with SSH details. Ok. The problem is there. You have installed debug package and details ar on Ticket#2013031966000464 Please enter and see the pro...

Maybe it would be better to fix the management error in RC11 only and then go to the performance issues. I would see this beast running.

I did not have problems with management in rc11. For me it was enough to fix for the moment only ospf

I Can but I use now rc11 version... becouse I prefer to reset daily at 6am my router to get rid TX drops that appear after 2 days. When I use rc12 version with the management problem its so big that my clients almost killed me.. But I think blitz is still using rc12.. Yes, I use now latest (22 MAr)...

Same management problem with latest rc12 and sometimes cpu's looks like this with 150mbps passing.

9%,99%,100%,100%,99%,100%,99%,99%,99%,99%,99%,99%,99%,
100%,99%,99%
free-memory: 1742720KiB

Someone testing build from today? Mar/19/2013 14:28:30 ?

[Ticket#2013031966000464]
I've installed 15 Mar version so from 24 hours the problem did not appeared.

So its end of menagement problem?

Yes. Today's version is in production for about 4 hours. No problems yet but we will see ...

Guys with CCR and Management issue that are using March 18 build. Please email supout.rif file to support, and if possible, also full access via SSH

[Ticket#2013031966000464]
I've installed 15 Mar version so from 24 hours the problem did not appeared.

This version (Mar18) should not have any management CPU usage problems:
http://www.mikrotik.com/download/share/ ... .0rc12.npk

Same problem.

BTest is supposed to load the CPU to 100%, that is it's job. As it only supports one core, what you see is completely normal and is to be expected. If the load would be less than 100%, it wouldn't be much of a test, would it? It's about 100 mbps. I 've installed now version rc12 from Mar/15 and rec...

I've installed 22Feb . The first thing i observed is that bandtest for tcp is doing 100 mbps test without one cpu going to 100% (50 -60 %). In the last rc12 cpu was going to 100 % at 60-70mbps.

Unfortunately same problem with snmp disabled, btserver disabled, pppoe disabled .... One cpu is stuck at 100 %.

Any ideeas?
Thanks
Andrew

how to setup mikrotik cloud core
and how to setup vlan

There are a lot of docs on google. Just search "configure mikrotik".
In winbox - interfaces - interface - add(+) you can add vlans.

Try to run SNMP walk to the router and check if it succeeds. It works. And if i disable it it stops working. When the cpu went to 100% ( and management stayed at 6-7 %) i've stopped snmp and all cpus shows 0-1% but after few minutes ( without doing anything) 2 processors stucked at 100 % and manage...

blitz.

You say :

I have disabled snmp and the cpu is back to normal.

So turning off snmp didnt really work?

Worked for 1 minute. but then 2 processors appeared with 100 % used by management

Now i have 2 processors used by management (

I have disabled snmp and the cpu is back to normal. I did not have this problem on rc11.

I have the same problem with latest v6.0rc12

Andrew you have build from Mar/13 ~12:00?

No, do you think the problem is solved? I will upgrade now.

I still have problems with my CCR1016 v6.0rc12 and CPU load. There are 40 pppoe clients on this router and no more than 100 Mbps traffic. One core is at 100%. What happens. I've deactivated btsever, but nothing happened. The cpu load apears after few hours. Can you help me with an oppinion. ( i have...

Hi, I have problems with my ccr1016 [Ticket#2013031166000479] . I've upgraded yesterday with latest rc12 but i observed that one cpu is 100 % (and others 0). On profile it shows it's used for management. I've stopped all the services but it looks the same. I've downgraded to RC11 I also have proble...

Hi, I have problems with my ccr1016 [Ticket#2013031166000479] . I've upgraded yesterday with latest rc12 but i observed that one cpu is 100 % (and others 0). On profile it shows it's used for management. I've stopped all the services but it looks the same. I've downgraded to RC11 I also have problem...

Hi! I have problems with my new CCR1016 V06rc7. I've send a report to support but no answer yet. Routes learned when i was running pppoe-server stays stucked in routing table as DAC even i stopped pppoe-server, ospf and everything else. Gateway for these routes are unknown and state reachable. The i...