Community discussions

MikroTik App

Search found 154 matches

by gosha
Mon Feb 13, 2023 10:57 pm
Forum: SwOS
Topic: Port load monitoring?
Replies: 0
Views: 1796

Port load monitoring?

Hello!

Does any Mikrotik switch with SwOS allows to monitor and build the port load statistics/graphs with SNMP/Dude or any other Cacti-like tool?

Thanks,
G.
by gosha
Fri Jul 08, 2022 8:21 am
Forum: RouterBOARD hardware
Topic: CCR1009 and CCR1016
Replies: 2
Views: 704

Re: CCR1009 and CCR1016

Some vendors have them.. Where are you located?

They are usually fixed by changing the capacitors which isn't difficult, just not easy.
Changing the capacitors did not helped twice.
I've already found and ordered, will try next week, thanks )
by gosha
Fri Jul 01, 2022 10:27 am
Forum: RouterBOARD hardware
Topic: CCR1009 and CCR1016
Replies: 2
Views: 704

CCR1009 and CCR1016

Hello!

I have 3 routers with dead PSU, 2 x CCR1009 and one CCR1016. Seems that the PSUs are the same. All routers are quite old, seems to be same. Where is possible to order the PSU for the first (with one PSU) revisions of the routers?

Thanks.
by gosha
Mon Sep 14, 2020 10:13 am
Forum: RouterBOARD hardware
Topic: hAP ac³ LTE6 kit internet (LTE) disconnects
Replies: 6
Views: 1586

hAP ac³ LTE6 kit internet (LTE) disconnects

Hello Got a complaint abt one hAP ac³ LTE6 kit, I've replaced LTAP mini LTE Kit with hAP ac³ LTE6 kit and started to see often disconnects in same place with the same SIM card. Log shows nothing, just internet goes down and up after some time (log only shows that VPN being terminated, but this tunne...
by gosha
Thu Dec 19, 2019 10:53 am
Forum: SwOS
Topic: no discovery after swos upgrade
Replies: 0
Views: 3413

no discovery after swos upgrade

Hi

I'm no longer see switches that was upgraded to 2.10 in a neighbors list. Mikrotik Discovery Protocol is ON. How to debug this?

Thanks,
D
by gosha
Mon Apr 08, 2019 1:31 pm
Forum: RouterBOARD hardware
Topic: place SIM cards 50m away from the modem
Replies: 2
Views: 1413

place SIM cards 50m away from the modem

Hi

My setup requires to place SIM cards over a long cable from a modem itself. I'd be glad to use LtAP mini LTE kit but need something to place the SIM cards far away. Can someone advice me any solution?
by gosha
Tue Mar 12, 2019 9:36 pm
Forum: General
Topic: Multiple routers management/provision
Replies: 0
Views: 623

Multiple routers management/provision

Hello

Running small ISP business and providing my clients Mikrotik for free. Since I have a houndreds routers, I would be glad to have some central management point, can someone advice any software for managing and monitoring multiple routers located in different networks ?

Thanks.
by gosha
Fri Jun 15, 2018 12:38 pm
Forum: General
Topic: PPP remote address assigning problem SXT LTE
Replies: 1
Views: 711

Re: PPP remote address assigning problem SXT LTE

I don't remember which version was on that SXT LTE before, but downgrading to 6.42.2 and to bugfix did not resolved the problem...
by gosha
Fri Jun 15, 2018 12:26 pm
Forum: General
Topic: PPP remote address assigning problem SXT LTE
Replies: 1
Views: 711

PPP remote address assigning problem SXT LTE

Hi After last upgrade to 6.42.3 (tried bugfix too, 6.40.8) on SXT LTE I got the following problem - ppp interface address getting LAN local ip 192.168.88.1. PPP Server (6.40.2): /ppp profile 8 * name="default-encryption" use-mpls=default use-compression=default use-encryption=yes only-one=...
by gosha
Mon May 21, 2018 10:01 pm
Forum: General
Topic: mac-telnet client for Windows [SOLVED]
Replies: 20
Views: 12352

Re: mac-telnet client for Windows [SOLVED]

So give Sob some sugar (Solved), then you will not get other answers
Already. But just now I have got another good answer )
by gosha
Mon May 21, 2018 10:00 pm
Forum: General
Topic: mac-telnet client for Windows [SOLVED]
Replies: 20
Views: 12352

Re: mac-telnet client for Windows [SOLVED]

I'll answer myself, probably because WinBox connects to MAC address if it cannot connect to IP address but not using telnet. So what about this one ? Don't let the name confuse you, it should support telnet as well. Would be good if it work as a MAC telnet client. Do not see the binary, will try to...
by gosha
Mon May 21, 2018 9:50 pm
Forum: General
Topic: mac-telnet client for Windows [SOLVED]
Replies: 20
Views: 12352

Re: mac-telnet client for Windows [SOLVED]

In that case, what is wrong about WinBox and another 'Tik? The sole reason why I wrote that "lecture" was that several people have suggested WinBox or another 'Tik as an answer and you accept none of these. because this is an answer to some another question. I've asked for MAC telnet appl...
by gosha
Mon May 21, 2018 9:41 pm
Forum: General
Topic: mac-telnet client for Windows [SOLVED]
Replies: 20
Views: 12352

Re: mac-telnet client for Windows [SOLVED]

Any MAC telnet client must be in the same LAN like the Mikrotik to which it connects, as it needs to have L2 access. So if your goal is to find an application which can connect remotely, because you want to avoid driving to the site, such application cannot exist. Therefore, a pre-configured small ...
by gosha
Mon May 21, 2018 9:21 pm
Forum: General
Topic: mac-telnet client for Windows [SOLVED]
Replies: 20
Views: 12352

Re: mac-telnet client for Windows [SOLVED]

If you want Telnet https://en.wikipedia.org/wiki/Telnet then use any Telnet client. If you want MAC Telnet MikroTik RouterOS proprietary protocol https://wiki.mikrotik.com/wiki/MAC_access then use Winbox and type Mikrotik router MAC address https://en.wikipedia.org/wiki/MAC_address in "Connect...
by gosha
Mon May 21, 2018 8:49 pm
Forum: General
Topic: mac-telnet client for Windows [SOLVED]
Replies: 20
Views: 12352

Re: mac-telnet client for Windows [SOLVED]

If you need telnet - putty
if you need MAC telnet for Windows - Winbox :)

2018-05-21 19_43_09-Screenshot (31).png ‎- Photos.png
Again, Winbox is not telnet and has no telnet
by gosha
Mon May 21, 2018 7:40 pm
Forum: General
Topic: mac-telnet client for Windows [SOLVED]
Replies: 20
Views: 12352

Re: mac-telnet client for Windows [SOLVED]

Winbox :?:
Winbox has no telnet
by gosha
Mon May 21, 2018 9:24 am
Forum: Virtualization
Topic: Simplest way to run ROS inside windows PC?
Replies: 5
Views: 3780

Re: Simplest way to run ROS inside windows PC?

Just make sure (and this is super important) to use CHR Install file, not the X86 ISO. Only CHR supports virtual machines:
https://wiki.mikrotik.com/wiki/Manual:C ... stallation
I got OVF and imported the machine. Anyway, the problem was because the network is switched off by default
by gosha
Mon May 21, 2018 1:19 am
Forum: General
Topic: Is there a way to restore config from hijacked mikrotik router?
Replies: 32
Views: 6373

Re: Is there a way to restore config from hijacked mikrotik router?

Glad to hear that the attackers are less clever than I've expected.
Not in all cases, unfortunately, some hijacked routers are inaccessible via mac-telnet...
by gosha
Mon May 21, 2018 1:06 am
Forum: Virtualization
Topic: Simplest way to run ROS inside windows PC?
Replies: 5
Views: 3780

Re: Simplest way to run ROS inside windows PC?

I'd say that the simplest way is to just use regular VirtualBox or VMware Player installation. RouterOS works with both. But if your heart is set on portable mode... I'm not sure what's the advantage, I've found some portable VirtualBox and it says that it needs admin rights to install some service...
by gosha
Mon May 21, 2018 12:50 am
Forum: Virtualization
Topic: Simplest way to run ROS inside windows PC?
Replies: 5
Views: 3780

Re: Simplest way to run ROS inside windows PC?

Don't have much experience with VirtualBox at all but in my case the portable installation is not able to bridge with host adapter. When I select bridge it shows no adapters in drop-down list below. I need a bridge because I need to use mac telnet from this RouterOS
by gosha
Sun May 20, 2018 11:18 pm
Forum: Virtualization
Topic: Simplest way to run ROS inside windows PC?
Replies: 5
Views: 3780

Simplest way to run ROS inside windows PC?

Hi

What is the simplest way to run RouterOS on windows? Which hypervisor can be running in portable mode? I tried Virtualbox portable, but it failes to run, at least on one my Win 7 machine, Any advises?

Thanks,
D
by gosha
Sun May 20, 2018 9:39 pm
Forum: General
Topic: Is there a way to restore config from hijacked mikrotik router?
Replies: 32
Views: 6373

Re: Is there a way to restore config from hijacked mikrotik router?

Router is not something you will sell later. They even did not closed the hole they used to get in.
by gosha
Sun May 20, 2018 6:37 pm
Forum: General
Topic: mac-telnet client for Windows [SOLVED]
Replies: 20
Views: 12352

Re: mac-telnet client for Windows [SOLVED]

Putty is good on windows
putty is not MAC telnet client. e.g. putty is unable to connect ROS using MAC address
by gosha
Sun May 20, 2018 5:53 pm
Forum: General
Topic: Is there a way to restore config from hijacked mikrotik router?
Replies: 32
Views: 6373

Re: Is there a way to restore config from hijacked mikrotik router?

Seems that jabberd found the way. Is is possible to use the same exploit, but hijackers limited the IP's user can log in, so it is needed to connect to hijacked router via MAC telnet, currently I',m trying to find the MAC telnet tool for windows...
by gosha
Sun May 20, 2018 5:51 pm
Forum: General
Topic: mac-telnet client for Windows [SOLVED]
Replies: 20
Views: 12352

mac-telnet client for Windows [SOLVED]

Anyone knows any MAC telnet client for Windows? Very difficult to find because most google results pont to telnet client for MAC OS )
by gosha
Sun May 20, 2018 1:08 pm
Forum: General
Topic: Is there a way to restore config from hijacked mikrotik router?
Replies: 32
Views: 6373

Re: Is there a way to restore config from hijacked mikrotik router?

Have you tried the trick with the LCD screen?; I had success with it at a customer site once
I'm 250km from my main problem :( Seems that I have backup from all hijacked routers, but have no access to all.
by gosha
Sun May 20, 2018 1:01 pm
Forum: General
Topic: Is there a way to restore config from hijacked mikrotik router?
Replies: 32
Views: 6373

Re: Is there a way to restore config from hijacked mikrotik router?

Do you have Telegram/Jabber/Twitter to directly contact me?
Does this forum support personal messages? I have the telegram account, yes.
by gosha
Sun May 20, 2018 10:05 am
Forum: General
Topic: Is there a way to restore config from hijacked mikrotik router?
Replies: 32
Views: 6373

Re: Is there a way to restore config from hijacked mikrotik router?

Yes, I tried with clear vulnerable router, this version is working and shows the admin password but not on the hijacked routers. Seems that they did something to close this exploit... Is 8291 port open at the hijacked devices? Yes, it's open. Winbox tells login incorrect when trying to connect
by gosha
Sun May 20, 2018 2:47 am
Forum: General
Topic: Is there a way to restore config from hijacked mikrotik router?
Replies: 32
Views: 6373

Re: Is there a way to restore config from hijacked mikrotik router?

Yes, I tried with clear vulnerable router, this version is working and shows the admin password but not on the hijacked routers. Seems that they did something to close this exploit...
by gosha
Sun May 20, 2018 2:43 am
Forum: General
Topic: Is there a way to restore config from hijacked mikrotik router?
Replies: 32
Views: 6373

Re: Is there a way to restore config from hijacked mikrotik router?

It's hard to tell if it's the same version. If you tried that prerelease.7z contents, then there can be some restriction in the firewall rules or in the services. Btw, there's no need to specify 8291 port: RS tries to use HTTP on these ports. It is latest needed version I think because the needed e...
by gosha
Sun May 20, 2018 2:32 am
Forum: General
Topic: Is there a way to restore config from hijacked mikrotik router?
Replies: 32
Views: 6373

Re: Is there a way to restore config from hijacked mikrotik router?

Yes, I got this 2.60 Beta. Entered IPs, started scan (added port 8291 also), each router listed twice, detected ROS version, total results found 7, good results - 0. In the lines with port numbers 8291 is written status Can't load main page. When trying to connect from winbox it still reports incorr...
by gosha
Sun May 20, 2018 2:11 am
Forum: General
Topic: Is there a way to restore config from hijacked mikrotik router?
Replies: 32
Views: 6373

Re: Is there a way to restore config from hijacked mikrotik router?

Both winbox and web are open, but all passwords are changed or locked. There's a tool called Router Scan, which recently got the winbox exploit implemented. I think, you'd give it a try. Probably, this tool was used by someone to hijack your devices. And if RouterOS versions aren't updated now, you...
by gosha
Sat May 19, 2018 3:44 pm
Forum: General
Topic: Is there a way to restore config from hijacked mikrotik router?
Replies: 32
Views: 6373

Re: Is there a way to restore config from hijacked mikrotik router?

some VPN works with previous passwords. which other services should I try? Are there open winbox/web services at these devices? For example, if there the winbox service was open before, and after the hijacking it's remaining open, you've got a chance to get the device back if there's a vulnerable R...
by gosha
Sat May 19, 2018 10:03 am
Forum: General
Topic: Is there a way to restore config from hijacked mikrotik router?
Replies: 32
Views: 6373

Re: Is there a way to restore config from hijacked mikrotik router?

Are they accessible in any way? I mean any open services there. some VPN works with previous passwords. which other services should I try? If these routers have an lcd screen and if its not locked and you have physical access, you can maybe restore a previously saved configuration via the lcd scree...
by gosha
Fri May 18, 2018 12:15 pm
Forum: General
Topic: Is there a way to restore config from hijacked mikrotik router?
Replies: 32
Views: 6373

Re: Is there a way to restore config from hijacked mikrotik router?

No, I lost access to about 10 routers, all there routers had a vulnerable versions, like described here viewtopic.php?f=2&t=132368

All routers that was backuped we already restored back with reset, but few routers is little bit difficult to restore...
by gosha
Fri May 18, 2018 12:08 pm
Forum: General
Topic: Is there a way to restore config from hijacked mikrotik router?
Replies: 32
Views: 6373

Re: Is there a way to restore config from hijacked mikrotik router?

What about re-hijacking this ?
by gosha
Fri May 18, 2018 11:57 am
Forum: General
Topic: Is there a way to restore config from hijacked mikrotik router?
Replies: 32
Views: 6373

Is there a way to restore config from hijacked mikrotik router?

Hello!

I have 5-7 routers that was hijacked and I lost access to it. There routers was never backuped and have pretty big configuration. Is there a way to restore it's configuration ?


Thanks,
D.
by gosha
Thu Mar 01, 2018 8:45 am
Forum: General
Topic: Force DHCP Client to renew lease?
Replies: 5
Views: 19930

Re: Force DHCP Client to renew lease?

I had a problems with some devices like Canon printers when lease time was set to 15 min. My advise not to use shorter than 30 minutes time.
by gosha
Sat Jan 20, 2018 9:03 pm
Forum: Announcements
Topic: v6.41 [current]
Replies: 304
Views: 139536

Re: v6.41 [current]

Can I downgrade in case if firmware was upgraded to 6.41? Which previous version to choose?
by gosha
Sat Jan 20, 2018 4:16 pm
Forum: Announcements
Topic: v6.41 [current]
Replies: 304
Views: 139536

Re: v6.41 [current]

After upgrading smoothly SSTP VPN is working fine but there is no route to internal LAN. Until this upgrade everything was running OK, is there any issue or extra configuration to be done with SSTP interface? I have the same problem but not only SSTP affected, PPtP is not working too. Even more str...
by gosha
Tue Dec 19, 2017 4:06 pm
Forum: General
Topic: Problems with CSS106 swithes.
Replies: 1
Views: 905

Re: Problems with CSS106 swithes.

I've used previously RB260 switches and was satisfied. My 2 CSS106-5G-1S is a 2 piece of shit, really. I have to restart 5 times to get it working, after upgrading to 2.6 I found that one was downgraded, second does not answers at all, only after reset, after that the first has stopped working. Is i...
by gosha
Sat Sep 23, 2017 1:50 pm
Forum: General
Topic: CRS212 SFP ports with fiber and RJ45 SFPS (RJ45 does not works)
Replies: 1
Views: 1033

CRS212 SFP ports with fiber and RJ45 SFPS (RJ45 does not works)

Hello In my few CRS212 switches does not works autonegotiations on fiber links if other side is not CRS212. Even with RB260 converter/switch it is not working. It works only if I will disable autonegotiation and choose the speed and duplex. Why??? SFPs are Optic's SFP-S-3553LC20D Second problem I ha...
by gosha
Thu Sep 21, 2017 1:02 pm
Forum: General
Topic: Problems with CSS106 swithes.
Replies: 1
Views: 905

Problems with CSS106 swithes.

Got a problems with new version of switches One CSS106-1G-1S currently unable to upgrade, after the upgrade switch starts to loose packes and replys 4 tiems to ping after restart and all. web does not answer, ping does not answer. Same problems was with second CSS106-1G-4P-1S but after few tries it ...
by gosha
Tue Mar 28, 2017 8:19 am
Forum: General
Topic: RDP password scan
Replies: 6
Views: 2790

Re: RDP password scan

Rdp Tool is not works at all because the logs do not contains the src ip address in case if strong security is used
by gosha
Mon Mar 27, 2017 2:26 pm
Forum: General
Topic: RDP password scan
Replies: 6
Views: 2790

RDP password scan

Hi Is there a way to block RDP password scanners ? Seems that RDP server do not drop the session and there is no new connection every new password, so there not possible to do same way as ssh, limit 3-5 new tcp sesstions per 2-3 minutes and all. RDP server do not logs the source IP on audit failures...
by gosha
Fri Oct 21, 2016 6:25 pm
Forum: SwOS
Topic: VLANs with RB260, urgently need help
Replies: 2
Views: 3258

Re: VLANs with RB260, urgently need help

Hello!

Problem is located, there was an error in design, the vlans was created on slave interface on routeros. Everything is ok now. Thank you!
by gosha
Fri Oct 21, 2016 4:33 pm
Forum: SwOS
Topic: VLANs with RB260, urgently need help
Replies: 2
Views: 3258

VLANs with RB260, urgently need help

Hello! Very confused with 802.1q VLANs. I have RB260 with SFP port connected to trunk (RouterOS device with VLAN subinterfaces added to the SFP interface connected with RB260). What config I have to use If I need 3 access ports on ethernets of RB260 and trunk on SFP port. Firmware 1.17. I found a fe...
by gosha
Fri Nov 06, 2015 5:48 pm
Forum: General
Topic: Feature request: CAPsManager - roaming
Replies: 80
Views: 39305

Re: Feature request: CAPsManager - roaming

Is there any new regarding the support of roaming in the way Ruckus do is (virtual ap in their terminology)?
by gosha
Fri Oct 23, 2015 8:25 am
Forum: Wireless Networking
Topic: Voucher generation and printing
Replies: 2
Views: 1735

Re: Voucher generation and printing

Handlink make a nice printer that does exactly that. http://www.handlink.com.tw or http://www.campbell.co.nz/index.php?main_page=product_info&cPath=9&products_id=696 We sell them here and they are easy to set up and use and have 3 buttons that can be paired with three different profiles. 1 ...
by gosha
Mon Oct 05, 2015 8:56 pm
Forum: The User Manager
Topic: Voucher generation and printing
Replies: 0
Views: 1624

Voucher generation and printing

Hi! Looking for a simple way to generate the wifi vouchers for a mikrotik user manager. Please advice any software that can generate a voucher by request and add it to user manager WITH ability to fill real user data and comment field or at least a comment field. The reason for this is that we have ...
by gosha
Mon Oct 05, 2015 11:33 am
Forum: Wireless Networking
Topic: Voucher generation and printing
Replies: 2
Views: 1735

Voucher generation and printing

Hi! Looking for a simple way to generate the wifi vouchers for a mikrotik user manager. Please advice any software that can generate a voucher by request and add it to user manager WITH ability to fill real user data and comment field or at least a comment field. The reason for this is that we have ...
by gosha
Sun Jan 19, 2014 5:16 pm
Forum: General
Topic: IP lost from default route's intarface.
Replies: 6
Views: 1826

Re: IP lost from default route's intarface.

unit is password protected and log do not shows anything. but unit was restarted by a client before I went there so probably my support output I sent to mikrotik's support will show nothing...
by gosha
Sat Jan 18, 2014 2:17 pm
Forum: General
Topic: IP lost from default route's intarface.
Replies: 6
Views: 1826

Re: IP lost from default route's intarface.

U want to say that somehow IP address from WAN port has been removed?
exactly.
by gosha
Sat Jan 18, 2014 12:35 pm
Forum: General
Topic: IP lost from default route's intarface.
Replies: 6
Views: 1826

Re: IP lost from default route's intarface.

Same problem got today with ROS 6.7
by gosha
Wed Jan 08, 2014 7:33 am
Forum: Virtualization
Topic: Metarouter for UBNT Unifi controller
Replies: 10
Views: 10730

Re: Metarouter for UBNT Unifi controller

AFAK unify works on java
by gosha
Wed Dec 25, 2013 10:06 pm
Forum: Virtualization
Topic: Metarouter for UBNT Unifi controller
Replies: 10
Views: 10730

Re: Metarouter for UBNT Unifi controller

Anybody tried running a metarouter instance using debian and a UBNT Unifi controller on that?

Would a RB 450G handle that? If not what equipment would I need?

Rick

Hello, sjwrick, had you any luck on this task?
by gosha
Thu Dec 19, 2013 4:33 pm
Forum: Virtualization
Topic: UniFI controller in Miktorik VM?
Replies: 1
Views: 3458

UniFI controller in Miktorik VM?

UBNT has released a software controller for Windows, Mac and Linux (in beta). They currently provide a .deb package http://wiki.ubnt.com/UniFi#Linux . Would be great to run in a VM inside Mikrotik router. Advice a simplest way to do it please?
by gosha
Sun Dec 08, 2013 3:12 pm
Forum: General
Topic: best tunnel type?
Replies: 3
Views: 2592

Re: best tunnel type?

My fried has replaced a pair of Cisco 1841 with pair or CCR1036 and users complains that the speed of interaction of their database applications has lowered. Cisco was connected with IPSEC tunnel interface Tunnel1 ip address 10.10.10.2 255.255.255.252 ip mtu 1400 ip tcp adjust-mss 1360 tunnel source...
by gosha
Sat Dec 07, 2013 11:53 pm
Forum: General
Topic: MAC address table in ROS?
Replies: 7
Views: 36079

Re: MAC address table in ROS?

CelticComms, but the mac address table is almost a term used when talking about a switches... I was asking because of new 24port coud core switch router has been released and it's cost seems to be very good and I want to try it instead switch+router pair. And there is a few questions I wanted to kno...
by gosha
Sat Dec 07, 2013 10:36 pm
Forum: General
Topic: VLAN practice
Replies: 6
Views: 2703

Re: VLAN practice

How many switches in CRS125-24G-1S-RM?
Could VLANs be managed in a switch manner with "/interface ethernet switch" commands?
by gosha
Sat Dec 07, 2013 10:26 pm
Forum: General
Topic: MAC address table in ROS?
Replies: 7
Views: 36079

Re: MAC address table in ROS?

I think you're looking for...

[<redacted>@STUFF-NETWORK-WAP] > /interface bridge host print
Based on your post I found what I'm looking for, this is

/interface ethernet switch host print

thank you!
by gosha
Sat Dec 07, 2013 9:24 pm
Forum: General
Topic: MAC address table in ROS?
Replies: 7
Views: 36079

Re: MAC address table in ROS?

Look in:

/IP Arp

and you should see the entries.
ARP table is an ARP table, I'm asking about MAC address table
by gosha
Sat Dec 07, 2013 8:24 pm
Forum: General
Topic: VLAN practice
Replies: 6
Views: 2703

Re: VLAN practice

That is quite simple. Create a bridge with port 1 and 3. Create a VLAN on the bridge with the desired VLAN id to be linked to ether2 and put the vlan interface together with ether2 into a dedicated bridge. I did not made a tests but I think this will eat CPU and will complicate the config because I...
by gosha
Sat Dec 07, 2013 8:19 pm
Forum: General
Topic: best tunnel type?
Replies: 3
Views: 2592

best tunnel type?

Hi!

What kind of tunnel with encryption is better to choose to connect 2 or more branches for all kinds of traffic: file sharing, RDP, database. Traffic should be routed, not bridged.
by gosha
Sat Dec 07, 2013 8:11 pm
Forum: General
Topic: MAC address table in ROS?
Replies: 7
Views: 36079

MAC address table in ROS?

Hi,

How do I see the MAC address table if I need to find which MACs on behind which ports?
by gosha
Sat Dec 07, 2013 8:03 pm
Forum: General
Topic: VLAN practice
Replies: 6
Views: 2703

VLAN practice

Hi Before buying my first cloud router switch I'd like to ask a community how to deal with VLANs. I believe that dispatching VLANs with bridge would not be a good idea, isn't it? What is the better than bridge way to receive, for example, 10 vlans in a trunk port 1, 1 vlan assign as native (PVID) to...
by gosha
Tue Nov 05, 2013 4:01 pm
Forum: General
Topic: IP lost from default route's intarface.
Replies: 6
Views: 1826

IP lost from default route's intarface.

Hello! Got a strange situation - ip has been lost from a two different routers, RouterOS 6.5. Client has called and said that no internet connection, after investigation I've found that no IP address on wan interface. Same issue was already twice on different router -2011UAS-2HnD and 951G-2HnD. Anyo...
by gosha
Fri Mar 15, 2013 11:37 am
Forum: Wireless Networking
Topic: Roaming in 2AP diferent network
Replies: 12
Views: 4391

Re: Roaming in 2AP diferent network

Uldis,

I will check, but it would be great to have a solution for some common default settings
by gosha
Fri Mar 15, 2013 11:33 am
Forum: Wireless Networking
Topic: Roaming in 2AP diferent network
Replies: 12
Views: 4391

Re: Roaming in 2AP diferent network

I tried with windows 7, windows xp default settings and Zyxel wifi voip phone

if a signal from a first AP still available but with low level, client will not switch to another AP with higher level.
by gosha
Fri Mar 15, 2013 11:02 am
Forum: Wireless Networking
Topic: Roaming in 2AP diferent network
Replies: 12
Views: 4391

Re: Roaming in 2AP diferent network

It's not so simple, if I go from one area to another client will not switch to better network if first is still exist, so voip client will disconnect the call
by gosha
Thu Mar 14, 2013 10:13 pm
Forum: Wireless Networking
Topic: Roaming in 2AP diferent network
Replies: 12
Views: 4391

Re: Roaming in 2AP diferent network

Hello,

I need to serve wifi ip phones exactly as pictured on the first post. Which solution can help with it? Client should switch from one AP to another if another signal becomes better. How to do it? I read the forum but still do not understand can I make it with Mikrotik or not?
by gosha
Mon Feb 04, 2013 10:31 pm
Forum: General
Topic: How to filter by binary content?
Replies: 3
Views: 958

Re: How to filter by binary content?

I see in wireshark "fc a5 81 05" but rule chain=forward action=log protocol=udp src-address-list=DNS_servers out-interface=WAN src-port=53 content=\FC\A5 log-prefix="" does not hit... why? full captured packet follows 000400010006000f1f69b4c60000080045000040643f00004011cbb55c3e63...
by gosha
Mon Feb 04, 2013 3:15 pm
Forum: General
Topic: How to filter by binary content?
Replies: 3
Views: 958

Re: How to filter by binary content?

Am I only one who needs to use filter rule by non text content???
by gosha
Sun Feb 03, 2013 12:15 pm
Forum: General
Topic: How to filter by binary content?
Replies: 3
Views: 958

How to filter by binary content?

Hello!

What to write into content field in a filter rule properties in case if I want to filter packets that contains two bytes 0xFCA5?
by gosha
Fri Feb 01, 2013 8:48 am
Forum: General
Topic: how to filter DNS REFUSE response in RouterOS?
Replies: 1
Views: 928

Re: how to filter DNS REFUSE response in RouterOS?

someone just attack my DNS servers from a botnet with the requests that my servers should reject, like SOA ripe.net, google.com and so on, I want to block them
by gosha
Fri Feb 01, 2013 8:07 am
Forum: General
Topic: how to filter DNS REFUSE response in RouterOS?
Replies: 1
Views: 928

how to filter DNS REFUSE response in RouterOS?

Hi!

I need to write a filter rule that will add an IP address to list by content, how to filter DNS response "REFUSE" by content? What I have to write as a content string in a filter rule?

Thanks,
G.
by gosha
Tue Mar 06, 2012 11:00 pm
Forum: RouterBOARD hardware
Topic: RB751U-2HnD as wireless bridge has unstable wireless connect
Replies: 15
Views: 10422

Re: RB751U-2HnD as wireless bridge has unstable wireless con

This is really good solution - disable the wireless...

Was any feedback or promises published from a MT side?
by gosha
Tue Mar 06, 2012 10:34 pm
Forum: RouterBOARD hardware
Topic: RB751U-2HnD as wireless bridge has unstable wireless connect
Replies: 15
Views: 10422

Re: RB751U-2HnD as wireless bridge has unstable wireless con

Hi Is there any solution for RB751U-2HnD wireless problems? I've sold about 10 units and at least 5 users complains about they wireless clients are disconnected often, more than one time per day. Every router with this "effect" runs with latest version of ROS, every setup use all default v...
by gosha
Mon Dec 05, 2011 9:08 pm
Forum: Wireless Networking
Topic: thinking based on Tom'b review why wifi sucks, part II
Replies: 9
Views: 3101

Re: thinking based on Tom'b review why wifi sucks, part II

what is the best choice - omni antennas on different channels or sector antennas?
where to find a 433 in case and with antennas?

thanks.
by gosha
Mon Dec 05, 2011 10:52 am
Forum: Wireless Networking
Topic: thinking based on Tom'b review why wifi sucks, part II
Replies: 9
Views: 3101

Re: thinking based on Tom'b review why wifi sucks, part II

Hi again

how do you think, some 433 RB with 2 radios and 2 omni antennas will be enough for 40 clients with internet (shaped up to 2mbit about 20mbit toatal with voip) on a 5Ghz band?
by gosha
Sun Dec 04, 2011 11:17 am
Forum: Wireless Networking
Topic: thinking based on Tom'b review why wifi sucks, part II
Replies: 9
Views: 3101

Re: thinking based on Tom'b review why wifi sucks, part II

Mahnet, which RB do you use to serve 20-30 clients per AP, on which band and does they use VoIP?
by gosha
Sun Dec 04, 2011 2:14 am
Forum: Wireless Networking
Topic: thinking based on Tom'b review why wifi sucks, part II
Replies: 9
Views: 3101

thinking based on Tom'b review why wifi sucks, part II

Hello Gurus, Earlier I was thinking that it is not real to build a wifi network on 60 client's nodes, today I read the article http://www.tomshardware.com/reviews/wi-fi-performance,2985.html where was described a test of an AP with a noise generated by 60 laptops and also was a test with 60 clients ...
by gosha
Fri May 27, 2011 9:18 pm
Forum: General
Topic: Some strange issue with SIP ReINVITEs thru Mikrotik router.
Replies: 0
Views: 649

Some strange issue with SIP ReINVITEs thru Mikrotik router.

Hello Dear Mikrotik Gurus! I got some problem which is not understandable by me, need some advices where to look more. I have some VoIP equipment in my network and now one strange problem follows me: during the SIP conversation between voip servers and cisco gateway not all packet sent from cisco su...
by gosha
Mon Mar 21, 2011 1:39 pm
Forum: General
Topic: Need an advice for selecting shaping scheme
Replies: 1
Views: 745

Re: Need an advice for selecting shaping scheme

every scenario I found myself requires 1 child queue per client, it's nightmare I think... Please, need guru advice.
by gosha
Sat Mar 19, 2011 8:51 pm
Forum: Wireless Networking
Topic: Need an advice for setting up a network with 50-75 clients.
Replies: 7
Views: 1453

Re: Need an advice for setting up a network with 50-75 clien

CPE per client. It's a trade center, client will connect to CPE - PC, card's terminal and voip telephone
by gosha
Sat Mar 19, 2011 8:05 pm
Forum: Wireless Networking
Topic: Need an advice for setting up a network with 50-75 clients.
Replies: 7
Views: 1453

Re: Need an advice for setting up a network with 50-75 clien

20 clients per AP is normal? I think to use 5ghz radios and also give CPEs to clients for free rent
by gosha
Sat Mar 19, 2011 3:19 pm
Forum: General
Topic: Need an advice for selecting shaping scheme
Replies: 1
Views: 745

Need an advice for selecting shaping scheme

Hello! Would like to ask a community for help me to select s traffic shaping scheme. I have a central router which is connected to the next ISP (currently it is RB1100) where I would like to setup a shaping. I have read few articles and lot of manuals but still confused and can't select a shaping me...
by gosha
Sat Mar 19, 2011 1:53 pm
Forum: Wireless Networking
Topic: Need an advice for setting up a network with 50-75 clients.
Replies: 7
Views: 1453

Re: Need an advice for setting up a network with 50-75 clien

So is there a good way to connect 50-60 clients, each can occupy up to 2-3 mpbs, not same time of course, common bandwidth not more than 30 mbps, with Mikrotik radios? Or it's an utopical scenario and I'll need just to make a wired network?
by gosha
Mon Feb 28, 2011 10:02 pm
Forum: Wireless Networking
Topic: Need an advice for setting up a network with 50-75 clients.
Replies: 7
Views: 1453

Need an advice for setting up a network with 50-75 clients.

Hi, I have some open space (trade center), about 60 m x 100 m and I want to connect all traders (approx. 50-60 clients) via wifi and give them up to 2-5 mpbs of download. My experience with standard 11b and 11g networks tells me that it's impossible. Otherwise I heard that with nstreme or tdma it is...
by gosha
Mon Dec 08, 2008 12:39 am
Forum: Scripting
Topic: get the data over serial port
Replies: 7
Views: 4148

Re: get the data over serial port

You can use /special-login for it.
by gosha
Tue May 27, 2008 11:01 pm
Forum: General
Topic: How to pass correct DhcpNodeType (option 46) value to Win?
Replies: 6
Views: 7949

Re: How to pass correct DhcpNodeType (option 46) value to Win?

Guys, I can't use 0x8, 0x00000008 nor 8, how to pass Hybryd mode to client??????
by gosha
Mon May 26, 2008 2:54 pm
Forum: General
Topic: How to pass correct DhcpNodeType (option 46) value to Win?
Replies: 6
Views: 7949

Re: How to pass correct DhcpNodeType (option 46) value to Win?

Thanks a lot for your answer!

RFC 1533 tells that 0x8 should be a Hybrid mode. Winbox does not allows to use 0x8, when I'm trying to use 0x00000008 then client receive B-Node (0x1) instead of H-Node.

What to do?

Thanks in advance!
by gosha
Mon May 26, 2008 10:16 am
Forum: General
Topic: How to pass correct DhcpNodeType (option 46) value to Win?
Replies: 6
Views: 7949

How to pass correct DhcpNodeType (option 46) value to Win?

Hello! I have a big problem with passing DHCP option 46 DhcpNodeType to windows clients. In case if I would like to set it to 1 (Broadcast) this works well, but when I wanna make Hybrid (8), winbox shows node type unkonown in ipconfig's output and in registry I see value 38. This was happened with a...
by gosha
Mon May 12, 2008 3:20 pm
Forum: General
Topic: Netinstall 3.9 - can't unpack.
Replies: 3
Views: 1268

Re: Netinstall 3.9 - can't unpack.

Tried 4 times with different computers and even different internet providers :)
by gosha
Mon May 12, 2008 1:37 pm
Forum: General
Topic: Netinstall 3.9 - can't unpack.
Replies: 3
Views: 1268

Netinstall 3.9 - can't unpack.

The .zip of netinstall 3.9 is damaged, please fix it.
by gosha
Thu Apr 17, 2008 3:39 pm
Forum: General
Topic: Netinstall to CF failed.
Replies: 0
Views: 701

Netinstall to CF failed.

Can't install mikrotik to CF via USB->IDE adapter. Netinstall writes "failed" and does nothing. What to do?
by gosha
Sun Mar 09, 2008 7:57 pm
Forum: General
Topic: How to make webproxy to masq client's connections? ROS 3.4
Replies: 4
Views: 1340

Re: How to make webproxy to masq client's connections? ROS 3.4

squid proxy can be configured to "masq" or not to masq the client's IP. I tried to use Mikrotik ROS proxy and websites see client's IP...
by gosha
Thu Mar 06, 2008 2:14 pm
Forum: General
Topic: Which hardware needed for router?
Replies: 4
Views: 1144

Re: Which hardware needed for router?

How can I a support person to check my configuration? I bought new ROS last weekend so can I ask for a support?
by gosha
Thu Mar 06, 2008 12:37 pm
Forum: General
Topic: Which hardware needed for router?
Replies: 4
Views: 1144

Re: Which hardware needed for router?

3,5 - 5mbps
10% - 30% of CPU
109 mb free RAM

sometimes (few times per minute) I see 100% of CPU.

but some clients said that they fill that new channel is slower... this is why I think about new hardware.
by gosha
Thu Mar 06, 2008 12:16 pm
Forum: General
Topic: Which hardware needed for router?
Replies: 4
Views: 1144

Which hardware needed for router?

Hi! I got some new channel which is 10 times faster than old and now want to ask about minimum hardware requirements. Let me describe the environment: 100 mbps local traffic, 5 mbps international traffic 25-35 NATed clients, 5-7 clients with real addresses all clients connected via 802.1q vlans I us...
by gosha
Thu Mar 06, 2008 10:50 am
Forum: General
Topic: How to make webproxy to masq client's connections? ROS 3.4
Replies: 4
Views: 1340

How to make webproxy to masq client's connections? ROS 3.4

Hi,

How to make proxy not transparent?

Thanks,
G.
by gosha
Wed Mar 05, 2008 4:25 pm
Forum: General
Topic: 3.3; Winbox has stopped show all data about DHCP leases;
Replies: 3
Views: 1478

Re: 3.3; Winbox has stopped show all data about DHCP leases;

Am I alone with that problem?
by gosha
Sat Mar 01, 2008 9:45 pm
Forum: General
Topic: 3.3; Winbox has stopped show all data about DHCP leases;
Replies: 3
Views: 1478

3.3; Winbox has stopped show all data about DHCP leases;

Hi,

Fresh install of MT, can't see all needed data in winbox's window. When I'm trying to look for bound dhcp leases I can't see computer name, MAC address and so on in a leases window of winbox. Console shows everything well. Look in attachment.

Any ideas?
by gosha
Sun Feb 03, 2008 7:05 pm
Forum: General
Topic: server behind MT with 2 different IP from different ISP?
Replies: 0
Views: 827

server behind MT with 2 different IP from different ISP?

Hi! Need to assign a second IP address to the server from another ISP. I have MT connected to 2 providers with the following setup: /ip address add address=30.30.30.1/30 interface=WAN1 /ip address add address=40.40.40.2/28 interface=WAN2 /ip address add address=30.30.10.1/24 interface=LAN /ip route ...
by gosha
Wed Jan 23, 2008 5:29 pm
Forum: General
Topic: How to add a second default route?
Replies: 13
Views: 6327

Re: How to add a second default route?

That was a very stupid mistake and I'm ashamed... I had checked that the router can access new gateway but after that I've reconfigured the VLAN configuration and forgot to change PVID on a switch port router connected in. All the time I made my experiments with the policy routing the MT router and ...
by gosha
Wed Jan 23, 2008 2:28 pm
Forum: General
Topic: How to add a second default route?
Replies: 13
Views: 6327

Re: How to add a second default route?

I found a mistake, please excuse me for bothering.
by gosha
Wed Jan 23, 2008 1:55 pm
Forum: General
Topic: How to add a second default route?
Replies: 13
Views: 6327

Re: How to add a second default route?

I made /ip route rule add src-address=160.160.115.0/26 action=lookup table=newGW /ip route add gateway 160.160.16.33 routing-mark=newGW also there is: /ip address add=160.160.115.1/26 interface=testNET /ip address add=160.160.16.33/25 interface=newISP But the address 160.160.115.1 is still can not b...
by gosha
Wed Jan 23, 2008 1:27 pm
Forum: General
Topic: How to add a second default route?
Replies: 13
Views: 6327

Re: How to add a second default route?

I read this document but this did not helps me a lot. When and for which condition I have to place a routing marks? Firewall->Mangle, add roule, based on src addres and add rule based on dst address, actions=mark_routing? mark_routing=new-gw then add def. gw with same routing mark? After that I have...
by gosha
Tue Jan 22, 2008 1:53 pm
Forum: General
Topic: How to add a second default route?
Replies: 13
Views: 6327

Re: How to add a second default route?

This is a different interfaces. What about non-NATed networks? Simpli the picture should be like this: Router connected to internet with 2 gateways: 60.60.44.93 (main) and 160.160.16.33 (new). Behind the firewall is (for example 4 networks): 192.168.0.0/24 10.10.14.0/24 60.60.47.0/25 160.160.115.0/2...
by gosha
Tue Jan 22, 2008 1:21 pm
Forum: General
Topic: How to add a second default route?
Replies: 13
Views: 6327

Re: How to add a second default route?

Thanks. But I don't need to do load balancing, i need to specify which networks should be routed thru new gateway.
by gosha
Tue Jan 22, 2008 12:22 pm
Forum: General
Topic: How to add a second default route?
Replies: 13
Views: 6327

Re: How to add a second default route?

Hi again! I'm urgently need an assistance! Where also I can ask for support? (I have a lot of Mikrotik licenses, is support included there?)

Thanks.
by gosha
Mon Jan 21, 2008 8:25 pm
Forum: General
Topic: Help to make an ISP with MT
Replies: 8
Views: 2400

Re: Help to make an ISP with MT

Your question is no clear and very common. Please specify what exactly you want to do and someone will answer.
by gosha
Mon Jan 21, 2008 11:22 am
Forum: General
Topic: How to add a second default route?
Replies: 13
Views: 6327

How to add a second default route?

Hi, I have a MT router and need to add second default gateway. The current configuration is following: router ip - 60.60.44.94/30, def gw. 60.60.44.93 behind the router I have one /25 network and lot of RFC1918 NATed networks. Now I got new fiber from another ISP and want to switch SOME of networks ...
by gosha
Tue Sep 04, 2007 8:02 pm
Forum: General
Topic: VPN for mobile users that works from everywhere.
Replies: 15
Views: 2739

Re: VPN for mobile users that works from everywhere.

Is it possible to use L2TP server with IPSEC (certificate or pre-shared keys)?
by gosha
Mon Sep 03, 2007 2:56 pm
Forum: General
Topic: VPN for mobile users that works from everywhere.
Replies: 15
Views: 2739

Re: VPN for mobile users that works from everywhere.

Thanks, but there is IPSec without L2TP and IPSec/L2TP but I need L2TP wothout IPSEC :)
by gosha
Mon Sep 03, 2007 10:27 am
Forum: General
Topic: VPN for mobile users that works from everywhere.
Replies: 15
Views: 2739

Re: VPN for mobile users that works from everywhere.

Urgently need help! One of my clients is on Dubai now and he need to connect to his office. PPtP does not works - error 619 (NAT router or firewall blocks backward connection). I tried to configure L2TP by phone but seems that Vista has a difference in configuration. I have no Vista here to try, can...
by gosha
Sat Sep 01, 2007 10:57 am
Forum: General
Topic: VPN for mobile users that works from everywhere.
Replies: 15
Views: 2739

Re: VPN for mobile users that works from everywhere.

What about client on Windows Vista?
by gosha
Fri Aug 31, 2007 11:30 pm
Forum: General
Topic: Traffic shaping for typical router for sub-provider.
Replies: 0
Views: 640

Traffic shaping for typical router for sub-provider.

Hi all again, Let's discuss the best way to setup a traffic shaper for a typical sub-provider's router, example router: interfaces: WAN LAN vlan1 vlan2 vlan3 vlan4 vlan5 ... servers WAN, vlan1, valn2 & servers - real ip networks. vlan3, vlan4 & vlan5 - src-nat to some real address, like: cha...
by gosha
Fri Aug 31, 2007 11:11 pm
Forum: General
Topic: Where to see new features list for 3.0 since 2.9?
Replies: 1
Views: 1487

Where to see new features list for 3.0 since 2.9?

Hi,

How to see full list of new features in 3.0 compared to 2.9?
by gosha
Fri Aug 31, 2007 11:09 pm
Forum: General
Topic: VPN for mobile users that works from everywhere.
Replies: 15
Views: 2739

Re: VPN for mobile users that works from everywhere.

The answer to my question was in manual :) There was just need to disable IPSec in registry : HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Rasman\Parameters: Value Name: ProhibitIpSec Data Type: REG_DWORD Value: 1 And everything started work. Will try with unfriendly NAT network tomorrow. Th...
by gosha
Fri Aug 31, 2007 10:38 pm
Forum: General
Topic: VPN for mobile users that works from everywhere.
Replies: 15
Views: 2739

Re: VPN for mobile users that works from everywhere.

Openvpn can not be installed on Mikrotik...
by gosha
Fri Aug 31, 2007 7:38 pm
Forum: General
Topic: VPN for mobile users that works from everywhere.
Replies: 15
Views: 2739

Re: VPN for mobile users that works from everywhere.

It's really does not differ much on server side. But my XP Pro give me the choice - PPtP or L2TP with IPSec. When I'm trying to establish a connection it writes that this connection requires a certificate which is not found...
by gosha
Fri Aug 31, 2007 4:20 pm
Forum: General
Topic: "routes" parametr in PPtP is ignored by windows client?
Replies: 1
Views: 744

"routes" parametr in PPtP is ignored by windows client?

Hi,

Is there a way to pass to windows pptp or l2tp cleint a command for adding routes to some additional networks?
by gosha
Fri Aug 31, 2007 4:09 pm
Forum: General
Topic: VPN for mobile users that works from everywhere.
Replies: 15
Views: 2739

Re: VPN for mobile users that works from everywhere.

Thanks for the answer!

Is there any howtos about configuring windows to be a l2tp client?
by gosha
Fri Aug 31, 2007 3:38 pm
Forum: General
Topic: Incorrect DHCP optoin.
Replies: 1
Views: 840

Re: Incorrect DHCP optoin.

Hi again. The problem is still did not resolved. I understand that my English is not very good so I'll try to say simpler. I have a Mikrotik router with dhcp server. I have a lot of such routers but all other works fine. This router should give DhcpNodeType (or netbios node type, option 46) to clien...
by gosha
Fri Aug 31, 2007 3:22 pm
Forum: General
Topic: VPN for mobile users that works from everywhere.
Replies: 15
Views: 2739

VPN for mobile users that works from everywhere.

Hi!

Is there a way to make a VPN server on mikrotik, like PPtP but to make it so it will be usable from any client, from behind NAT that does not supports VPN pass-thru and so on?
by gosha
Wed Aug 22, 2007 5:21 pm
Forum: General
Topic: Incorrect DHCP optoin.
Replies: 1
Views: 840

Incorrect DHCP optoin.

Hi,

I use Miktorik as a DHCP server and it gives an incorrect option value to clients. Clients - Windows XP, option 46 (DhcpNodeType), value - 1 or 8, client received 31 or 38? How it is possible. Version 2.9.45, upgrade to 2.9.46 gives nothing. Need help!
by gosha
Mon Mar 05, 2007 12:25 pm
Forum: General
Topic: Is it possible to get a WinBOX's stored password from a hdd?
Replies: 3
Views: 1370

Open in notepad %appdata%\Mikrotik\winbox.cfg this file will contain the information you want.
Thanks! This is exactly what I wanted to know!
by gosha
Mon Mar 05, 2007 10:02 am
Forum: General
Topic: Is it possible to get a WinBOX's stored password from a hdd?
Replies: 3
Views: 1370

Is it possible to get a WinBOX's stored password from a hdd?

Hi! I have a crashed system where was stored (rememberd in Mikrotik) a few passwords for few routers. There passwords is forgotten and not stored anywhere else. Where Mikrotik stores the passwords and how to get them from another hdd or how to transfer them into current WinBOX installation? Thanks i...
by gosha
Fri Oct 20, 2006 9:42 am
Forum: General
Topic: PPtP access from behind NAT
Replies: 0
Views: 1228

PPtP access from behind NAT

Hi,

A strange issue, I have a log of VPN servers and found one strange issue, from behind Mikrotik's NAT I can easyly access all Mikrotik VPN's (PPtP) but no LEAF (http://leaf.sourceforge.net) implementation of PPtP, it habgs with a timeout after password verification. What it could be?
by gosha
Fri Oct 20, 2006 9:38 am
Forum: General
Topic: Limit an access to graphs
Replies: 1
Views: 1374

Limit an access to graphs

Hi!

How to limit an access to graphs with passwords, not only by IP?


Thanks,
Gosha.
by gosha
Tue Jan 31, 2006 7:53 am
Forum: General
Topic: Avaialable bandwidth sharing.
Replies: 6
Views: 1814

In this case this will not know about "parent bandwidth" - 5/5 (parent=none), these queues on different interfaces and should not work, or am I wrong?
by gosha
Tue Jan 31, 2006 7:42 am
Forum: General
Topic: Avaialable bandwidth sharing.
Replies: 6
Views: 1814

Thanks for the answer! I made a scheme like this but this does not works. What queues I have to use? Maybe we can write a sample small queue script? For example: WAN ip is 60.70.80.1/30 vlan1 ip is 192.168.0.1/24 (masquaraded) vlan2 ip is 192.168.1.1/24 (masqueraded) vlan3 ip is 60.70.90.1/25 (real) ?
by gosha
Mon Jan 30, 2006 11:39 pm
Forum: General
Topic: Avaialable bandwidth sharing.
Replies: 6
Views: 1814

Avaialable bandwidth sharing.

Hi! I have now some trouble to setup bandwith limiting so, that user have the bandwidth more than they limited in case of empty channel. Let me explain dataily: Interfaces: WAN, LAN, vlan1, vlan2, vlan3 (vlans of LAN). vlan1 limit - 1MBit (up/down) vlan2 limit - 2MBit vlan3 limit - 3MBit WAN possibi...
by gosha
Tue Jan 24, 2006 8:24 pm
Forum: General
Topic: Can't establish IPSEC tunnel
Replies: 0
Views: 1306

Can't establish IPSEC tunnel

When we try to build IPSEC tunnel between two network behind Mikrotik router, Installed SA where 'direction=out' is missing on the one side while remote side has both Installed SAs for in and out. Packets can travel in one direction with no problem, on the way in opposite direction they are dropped ...
by gosha
Wed Jan 04, 2006 1:10 pm
Forum: General
Topic: Feature request: Multicasting support.
Replies: 7
Views: 4752

Anyone knows any about multicast? I think soon it will be very requested fature, I'm thinking to move out of Mikrotik in case if it will not support the until spring 2006.

Who knwos any alternative?
by gosha
Tue Jan 03, 2006 2:05 pm
Forum: General
Topic: WIMAX Mini-PCI is out!
Replies: 16
Views: 13327

And which MT version will support them?
by gosha
Tue Jan 03, 2006 2:04 pm
Forum: General
Topic: WIMAX Mini-PCI is out!
Replies: 16
Views: 13327

Is there any PCI versions available too? Who knows something about the prices?
by gosha
Mon Jan 02, 2006 11:23 pm
Forum: General
Topic: Feature request: Multicasting support.
Replies: 7
Views: 4752

Feature request: Multicasting support.

Hi!

Now is a lot of internet radion stations and also a lof of mature ISPs wants to start broadcasting a TV programs over internet. Is there a planes to support multicasting in Mikrotik soon?
by gosha
Sun Dec 25, 2005 11:21 pm
Forum: General
Topic: Multicasting.
Replies: 2
Views: 1364

Multicasting.

Hi!

At the spring 2006 many ISP will provide IPTV service. I have a log of mikrotiks installed on my networks but I'm not shure does Mikrotik supports multicast packets pass thru? If not, is there any planes to support it?
by gosha
Tue Nov 29, 2005 9:36 pm
Forum: General
Topic: Log serial port with Mikrotik?
Replies: 2
Views: 1307

yes, i can use linux for it but I don't want to place another comp for it. Is it possible to do it with linux or not?
by gosha
Mon Nov 28, 2005 6:38 pm
Forum: General
Topic: SSH's user authorization with keys, not passwords.
Replies: 0
Views: 889

SSH's user authorization with keys, not passwords.

Hi!

Is is possible to authorize users in MT based on standart SSH's key exchange, like in Linux's SSH supports authorized_keys?
by gosha
Mon Nov 28, 2005 6:37 pm
Forum: General
Topic: Log serial port with Mikrotik?
Replies: 2
Views: 1307

Log serial port with Mikrotik?

Hi!

I need to make a PBX's CDR log. Is it possible to simply write everything that came from Serial port to some text file on HDD?
by gosha
Sun Jun 19, 2005 11:08 am
Forum: General
Topic: Feature request: VPN dialup from any place
Replies: 1
Views: 1376

Feature request: VPN dialup from any place

Hi! Maybe this is just a question, maybe feature request. It would be great to have a VPN solution for mobile users that could work from any place: from NATed networks, from highly firewalled networks and so on. PPtP does not allows to work from classical NAT (without VPN natting modules). IPSec see...
by gosha
Wed Dec 08, 2004 8:56 pm
Forum: General
Topic: vlan firewalling
Replies: 4
Views: 2474

I had the same situation, but found that I have an interface with the name "all", everything goes well after renaming this interface and rewriting filter rules.
by gosha
Mon Nov 29, 2004 4:57 pm
Forum: General
Topic: WCCP
Replies: 2
Views: 2151

Yes!

WCCP would be great!
by gosha
Tue Sep 07, 2004 5:56 pm
Forum: General
Topic: Any internal ADSL modems supported?
Replies: 6
Views: 3432

Regular price: $220.00 for S518 ADSL Card

Too expensive. Any other supported?
by gosha
Mon Sep 06, 2004 11:21 pm
Forum: General
Topic: Any internal ADSL modems supported?
Replies: 6
Views: 3432

Any internal ADSL modems supported?

Hi!

Tried few Intel and 3Com PCI ADSL cards - none recognized. Which internal ADSL interfaces supported?
by gosha
Sun Sep 05, 2004 3:38 pm
Forum: General
Topic: Can Mikrotik do that?
Replies: 1
Views: 1498

Can Mikrotik do that?

Hi, Need to make a few VPN tunnels to connect head brach with 3-5 offices, all tunnel will have about 5mbps of traffic and 50 computers with database access and file sharing. The necscreen hardware, that adviced fot this configuration will cost about 4000 eur. Also I found some Conrtivity that writt...
by gosha
Mon Jul 26, 2004 3:53 pm
Forum: General
Topic: IPSec with roaming client (roadwarior)
Replies: 5
Views: 3395

There is a problem with Mikrotik's IPSec realization (or I can not understand somewhat). I'v made an IPSec configuration to acept connections from dynamic IP addresses and it works, but what to di with the filters? I mean I can't open forwarding for all possible client's ips because I just don;t kno...
by gosha
Sat Jul 24, 2004 10:43 am
Forum: General
Topic: IPSec with roaming client (roadwarior)
Replies: 5
Views: 3395

I mean that Mikrotik and Windows's client has build the tunnel, router has created th dynamic policy, but the forward chain of the firewall has a default policy - DROP. I cant add the rules to the firewall that allow communication between IPSec roadwarior because his adress is unknown. Is there a po...
by gosha
Sat Jul 24, 2004 2:11 am
Forum: General
Topic: IPSec with roaming client (roadwarior)
Replies: 5
Views: 3395

Thanks.

And also what to do, if default forward policy is DROP? How to allow encrypted packets to pass to/out of the LAN?
by gosha
Tue Jul 20, 2004 7:39 pm
Forum: General
Topic: IPSec with roaming client (roadwarior)
Replies: 5
Views: 3395

IPSec with roaming client (roadwarior)

Hi all.

Now I already know how to configure Windows clients to work with Mikrotik's IPSec VPN. Is there a possibility to work with client's with dynamic IP adresses?

Thanks in advance,
Dmitri.
by gosha
Mon Jul 19, 2004 3:18 pm
Forum: General
Topic: IPSEC : Mikrotik&Windows2000
Replies: 3
Views: 3262

Maybe share this on another server to?

Hi,

Link http://www.115.ru/ipsec/ipsec-mikrotik-windows2000.htm said that its temporary unavailable. Is there any other locations, where is possible to view this doc?