Community discussions

MUM Europe 2020

Search found 55 matches

by osvaldotcf
Sat Jun 13, 2015 9:42 pm
Forum: General
Topic: dhcp relay and add-arp=yes
Replies: 5
Views: 1600

Re: dhcp relay and add-arp=yes

This is important!
Perhaps with scripts.
by osvaldotcf
Sat May 16, 2015 12:55 am
Forum: Scripting
Topic: Command api to get bytes 'in' and 'out' from each dhcp simple queue
Replies: 3
Views: 684

Re: Command api to get bytes 'in' and 'out' from each dhcp simple queue

No, sorry.
My mistake .
I meant that I'm using dhcp and generating "simple queue " through DHCP with Radius .
by osvaldotcf
Fri May 15, 2015 2:50 am
Forum: Scripting
Topic: Command api to get bytes 'in' and 'out' from each dhcp simple queue
Replies: 3
Views: 684

Command api to get bytes 'in' and 'out' from each dhcp simple queue

command api to get bytes in and out from each dhcp simple queue
Anyone could help us?
thank you.
by osvaldotcf
Thu May 14, 2015 11:31 pm
Forum: General
Topic: How the counters of bytes of simple queue work?
Replies: 1
Views: 363

How the counters of bytes of simple queue work?

How the counters of bytes of simple queue work?
by osvaldotcf
Thu May 14, 2015 6:42 pm
Forum: General
Topic: Get bytes (stats) from simple queue with api; dhcp + freeradius
Replies: 1
Views: 373

Get bytes (stats) from simple queue with api; dhcp + freeradius

I need to save the customer usage accounting . I use dhcp with RADIUS . I'm getting via API values ​​of bytes but do not understand them. I thought that accountants were ongoing but suddenly they restart even without reaching great values ​​. Our customers have a session time out 10 min, but there i...
by osvaldotcf
Tue Apr 28, 2015 6:25 am
Forum: General
Topic: DHCP Server with Freeradius Sqlippool - Pool of IPs from SQL database.
Replies: 1
Views: 880

Re: DHCP Server with Freeradius Sqlippool - Pool of IPs from SQL database.

Return is in Framed-Ip-Address
Simple, no problem!
by osvaldotcf
Mon Apr 27, 2015 3:45 am
Forum: General
Topic: DHCP Server with Freeradius Sqlippool - Pool of IPs from SQL database.
Replies: 1
Views: 880

DHCP Server with Freeradius Sqlippool - Pool of IPs from SQL database.

Is possible to configure DHCP for that IP be assigned from the sql database via RADIUS ?
Using Rlm_sqlippool ?
How can i do that ?
by osvaldotcf
Wed Mar 04, 2015 5:55 pm
Forum: Wireless Networking
Topic: SXT - AP and CPE - Vlan Access Port - Vlan Untagged
Replies: 0
Views: 417

SXT - AP and CPE - Vlan Access Port - Vlan Untagged

I need to create a network layout with two SXT . In the AP have a simple configuration with three other SXT accessing the internet by NAT . Also in AP , need to set up a bridge with vlan to interconnect a CCR Router Port (with vlan 3401) and a client (untagged) with a computer without vlan. AP: vlan...
by osvaldotcf
Sat Sep 27, 2014 4:59 pm
Forum: Wireless Networking
Topic: From UBNT to MIkrotik: WPA2/PEAP with username and password
Replies: 6
Views: 1894

Re: From UBNT to MIkrotik: WPA2/PEAP with username and passw

Hello. I'm no slve the problem, I'm having is to have working WPA with RADIUS. CPEs can connect to access-list configured on the AP with the same password as the CPE, but does not connect when I put a different password in the access-list and the correct password on the RADIUS. I get this informatio...
by osvaldotcf
Sun Sep 14, 2014 11:06 pm
Forum: Wireless Networking
Topic: From UBNT to MIkrotik: WPA2/PEAP with username and password
Replies: 6
Views: 1894

Re: From UBNT to MIkrotik: WPA2/PEAP with username and passw

None describes wpa peap.

Already RADIUS for hotspot and pppoe, my problem is with WPA2 / PEAP clients mikrotik and UBNT for mikrotik APs.
by osvaldotcf
Sun Sep 14, 2014 6:16 pm
Forum: Wireless Networking
Topic: From UBNT to MIkrotik: WPA2/PEAP with username and password
Replies: 6
Views: 1894

From UBNT to MIkrotik: WPA2/PEAP with username and password

How can I migrate from UBNT to Mikrotik APs and CPEs with WPA2 / PEAP?

With UBNT RADIUS is very simple to configure WPA2/PEAP with username ans password. Register the AP on FreeRADIUS as client and configure username and password in the CPEs. WPA2/PEAP works!

How I do with Mikrotik?
by osvaldotcf
Mon Jun 16, 2014 5:09 am
Forum: General
Topic: is there any way to log NAT?
Replies: 20
Views: 12780

Re: is there any way to log NAT?

Any one can comment this in actual environment of hardware and software?

Any idea to solve the problem of lack of public ips?
by osvaldotcf
Thu May 02, 2013 4:07 am
Forum: General
Topic: v6rc14 released
Replies: 125
Views: 30963

Re: v6rc14 released

it seems that Mikrotik OS gets worse from release to release
sorry but i have enought !!
It's not a final release which means it's not ready for production use! ;-)
Yes but is not a Beta!
This is a Release Candidate! and ... 14!!!!!
by osvaldotcf
Sun Apr 28, 2013 4:23 am
Forum: General
Topic: RouterOS v6rc12
Replies: 78
Views: 23204

Re: RouterOS v6rc12

Hello IP>>HotSpot>>Active Users>> Users Tx Rate , is not active on this Version. It was not active on RC11 also. Any suggestion ? Regards Do you use Bridge ? I had this problem in v6rc11. i was waiting for this fix. It seem has not been fixed http://forum.mikrotik.com/viewtopic.php?f=2&t=70207 +1 n...
by osvaldotcf
Sun Apr 28, 2013 4:21 am
Forum: General
Topic: RouterOS v6rc12
Replies: 78
Views: 23204

Re: RouterOS v6rc12

+1

Yes, i put several backup and when i restore ... no tx rate on hotspot!
by osvaldotcf
Sat Apr 27, 2013 11:04 pm
Forum: General
Topic: Hotspot tx rate problem
Replies: 10
Views: 2707

Re: Hotspot tx rate problem

did RouterOS v6rc12 resolve this?
No! neither v6rc13 !
by osvaldotcf
Tue Apr 16, 2013 8:56 pm
Forum: General
Topic: RB450G - ROS 5.22 - HotSpot - Queue not show clients.
Replies: 0
Views: 441

RB450G - ROS 5.22 - HotSpot - Queue not show clients.

RB450G - ROS 5.22 - HotSpot - Queue not show clients. Why customers do not appear on "simple queue"? Hotspot clients are not showing up on Simple Queue neither on terminal print command! Only the hotspot name appears /queue simple> print Flags: X - disabled, I - invalid, D - dynamic 0 D name="hs-<hs...
by osvaldotcf
Tue Apr 16, 2013 5:30 am
Forum: General
Topic: 6rc13 - Hotspot on VLAN on Switch Port: No Simple Queue
Replies: 0
Views: 1264

6rc13 - Hotspot on VLAN on Switch Port: No Simple Queue

Freeradius - Hotspot - VLAN over port ether1 as part of switch chip (switch1)

Why customers at a hotspot configured on a vlan over a port of switch1 chip (configured) of a RB1200 not appear in Simple Queue?
by osvaldotcf
Mon Apr 01, 2013 4:41 pm
Forum: General
Topic: Downgrade CCR1036-12G-4S to v 5.xx
Replies: 5
Views: 1699

Re: Downgrade CCR1036-12G-4S to v 5.xx

I have the same problem.
RB 1200 v6rc11
by osvaldotcf
Mon Apr 01, 2013 4:36 pm
Forum: General
Topic: Problem With CCR1036-12G-4S v6.0rc7
Replies: 3
Views: 1921

Re: Problem With CCR1036-12G-4S v6.0rc7

I have the same problem.
RB 1200 v6rc11
by osvaldotcf
Mon Apr 01, 2013 3:54 pm
Forum: General
Topic: v6rc12 - PPPoE - No traffic, Show "D" not "DR"
Replies: 0
Views: 1213

v6rc12 - PPPoE - No traffic, Show "D" not "DR"

PPPoE.
There is no traffic on some clients, not at all.
To customers without traffic, on PPPoE, the first column is showing a D and not a DR.
by osvaldotcf
Tue Mar 26, 2013 6:05 pm
Forum: RouterBOARD hardware
Topic: RB1200 do not reboot, stopped on: jumping to kernel code
Replies: 24
Views: 9470

Re: RB1200 do not reboot, stopped on: jumping to kernel code

Same Problem.

3 RB1200 same firmware/RouterOS

Current Firmware 3.02
RouterOS: v5.24
Same problem: Firmware 3.02 and v6rc11
by osvaldotcf
Mon Mar 18, 2013 12:56 pm
Forum: RouterBOARD hardware
Topic: RB1200 performance issues on ether9 and 10?
Replies: 8
Views: 6287

Re: RB1200 performance issues on ether9 and 10?

This problem is fixed on V6rc11 ?
by osvaldotcf
Sat Mar 09, 2013 3:33 am
Forum: General
Topic: Interface packet Drops on an octacore xeon with intel nics
Replies: 31
Views: 14557

Re: Interface packet Drops on an octacore xeon with intel ni

I have the same, or not, problem with RB1200 RouterOS v6rc11.

On hotspot all clients with 0 tx rate.
by osvaldotcf
Sat Mar 09, 2013 3:26 am
Forum: General
Topic: Tx traffic rate drops to zero all of a sudden
Replies: 3
Views: 1321

Re: Tx traffic rate drops to zero all of a sudden

I Have the same problem with RB1200 RouterOS v6rc11.
by osvaldotcf
Sat Mar 09, 2013 3:15 am
Forum: General
Topic: Hotspot tx rate problem
Replies: 10
Views: 2707

Re: Hotspot tx rate problem

I have the same problem!
Please, anyone!
by osvaldotcf
Thu Feb 28, 2013 3:00 am
Forum: General
Topic: RB1200 Switch Chip - Vlan and IP
Replies: 2
Views: 677

Re: RB1200 Switch Chip - Vlan and IP

The 1200 has the atheros 8316 switch chip. Therefore the following instructions would work to operate VLAN's in the switch chip itself. http://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features#Example_-_802.1Q_Trunking_with_Atheros_8316 The switch chip itself (as far as I can recall) can't manage ...
by osvaldotcf
Wed Feb 27, 2013 9:16 pm
Forum: General
Topic: RB1200 Switch Chip - Vlan and IP
Replies: 2
Views: 677

RB1200 Switch Chip - Vlan and IP

Could anyone help me with the configuration of RB1200 to use your switch chip to work with vlan with ip in RB itself?
by osvaldotcf
Tue Feb 26, 2013 1:16 pm
Forum: RouterBOARD hardware
Topic: Switch Chip: Vlan on CPU Port - Does not work!
Replies: 0
Views: 487

Switch Chip: Vlan on CPU Port - Does not work!

Hello
I could not understand what is wrong with the following configuration:
- Switch Chip active
- Create a Vlan with 2020 /vlan interface with WinBox on port of the switch
- Add ip address to vlan 2020

This ip does not connect, no pings!
by osvaldotcf
Tue Feb 26, 2013 5:28 am
Forum: General
Topic: Change set RB800+RB250GS by RB1200
Replies: 1
Views: 416

Re: Change set RB800+RB250GS by RB1200

Hello I want to change the set rb800 + rb250gs by a rb1200. I would use the chip of switch of the rb1200. For the test I did had trouble setting a "software vlan" on the switch ports to put him ips. The RB1200 crashed when I began to ping to an IP on the network of the same vlan. Does anyone have e...
by osvaldotcf
Tue Feb 26, 2013 3:40 am
Forum: General
Topic: Need help with a vlan
Replies: 4
Views: 778

Re: Need help with a vlan

You can possibly do that with a switch chip function, but not with the bridge. I have never used the switch chip, especially for something like this setup, so I wouldn't be able to speak to if it is possible or not. I have searched this knowledge: in a vlan on port of switch chip put a IP. Does not...
by osvaldotcf
Tue Feb 26, 2013 3:33 am
Forum: General
Topic: Brainfreeze : VLAN from RB1200 to RB493
Replies: 6
Views: 1459

Re: Brainfreeze : VLAN from RB1200 to RB493

also, should I just bridge ether2-6 and not bother with a switch for the AP's (I read not to use the RB as a switch)? Unless I'm mistaken the RB1200 has a switch chip, so that should work fine. Don't bridge, though. Use the switch chip. I think (not sure, don't have an RB1200) that you can only gro...
by osvaldotcf
Tue Feb 26, 2013 3:15 am
Forum: RouterBOARD hardware
Topic: RB1200 Switch Chip - Vlan (cpu) on port does not work
Replies: 0
Views: 390

RB1200 Switch Chip - Vlan (cpu) on port does not work

It does not work, or do not know where to get information!

Hi.
I have the following configuration:
Switch1: Port1+Port2+Porta3
Interface vlan added on port1 ( not on switch vlan)
Ip added in the vlan port1

This ip not ping on other RB with your ip configured with the same vlan.
by osvaldotcf
Mon Feb 25, 2013 4:34 am
Forum: General
Topic: Change set RB800+RB250GS by RB1200
Replies: 1
Views: 416

Change set RB800+RB250GS by RB1200

Hello I want to change the set rb800 + rb250gs by a rb1200. I would use the chip of switch of the rb1200. For the test I did had trouble setting a "software vlan" on the switch ports to put him ips. The RB1200 crashed when I began to ping to an IP on the network of the same vlan. Does anyone have ex...
by osvaldotcf
Wed Feb 20, 2013 8:43 pm
Forum: General
Topic: Firewall rules commonly used by you on the edge
Replies: 3
Views: 1537

Re: Firewall rules commonly used by you on the edge

We are a ISP and search for rules for de edge firewall for us.
by osvaldotcf
Wed Feb 20, 2013 5:52 am
Forum: General
Topic: Firewall rules commonly used by you on the edge
Replies: 3
Views: 1537

Firewall rules commonly used by you on the edge

What the firewall rules commonly used by you on the edge?
by osvaldotcf
Sat Feb 16, 2013 1:27 pm
Forum: General
Topic: How can separate traffic on two ports of a switch chip?
Replies: 3
Views: 499

Re: How can separate traffic on two ports of a switch chip?

in firewall of this router try to drop the traffic between ether (4,5) and the other ethers
No, this is not the way SWITCH CHIP!

The operations must be made ​​at the Chip Switch, not the firewall.
by osvaldotcf
Sat Feb 16, 2013 5:20 am
Forum: General
Topic: How can separate traffic on two ports of a switch chip?
Replies: 3
Views: 499

How can separate traffic on two ports of a switch chip?

How can I separate traffic on two ports of a switch chip of a rb1200? Port 5 will have a cable, will pass traffic directly to port 4 linked to a firewall, both part of the switch of a rb1200. Ports 1, 2 and 3 should not see this traffic. The idea is that I'll be using a separate firewall and i want ...
by osvaldotcf
Fri Feb 15, 2013 4:06 pm
Forum: RouterBOARD hardware
Topic: RB1200 12v and 24v : What polarity DC on J11?
Replies: 4
Views: 1105

Re: RB1200 12v and 24v : What polarity DC on J11?

+pin is closer to side of the router. If you look on the back of the router you can see that one pin is with square base (ground) and other is with round (+).

And as sergejs already replied, 12V 3A PSU.
Thank you
by osvaldotcf
Thu Feb 14, 2013 8:18 pm
Forum: RouterBOARD hardware
Topic: RB1200 12v and 24v : What polarity DC on J11?
Replies: 4
Views: 1105

Re: RB1200 12v and 24v : What polarity DC on J11?

12V ; 3A PSU + near J11. Hello Sorry I have not expressed myself correctly. I need feed a RB1200 with 12v. I saw in the manual that is possible using the J11. What I do not saw in the manual is the indication what pin is the positive and what pin is the negative and what the amperage required in th...
by osvaldotcf
Thu Feb 14, 2013 1:09 am
Forum: RouterBOARD hardware
Topic: RB1200 12v and 24v : What polarity DC on J11?
Replies: 4
Views: 1105

RB1200 12v and 24v : What polarity DC on J11?

RB1200 12v and 24v :

What polarity DC?
Can anyone advise the correct procedure for connecting on 12 volt?
What is the amperage?

The manual does not show the polarity nor the amperage to 12v.
by osvaldotcf
Sat Feb 09, 2013 12:32 am
Forum: RouterBOARD hardware
Topic: RB1200 do not reboot, stopped on: jumping to kernel code
Replies: 24
Views: 9470

Re: RB1200 do not reboot, stopped on: jumping to kernel code

Hello again, Seen here: http://forum.mikrotik.com/viewtopic.php?f=3&t=69442#p353357 Make sure reset jumper hole (http://wiki.mikrotik.com/wiki/Manual:Password_reset) is clean and both sides are not connected with metallic object. It can make configuration reset on every reboot. Perhaps during the l...
by osvaldotcf
Fri Feb 08, 2013 7:43 pm
Forum: RouterBOARD hardware
Topic: RB1200 do not reboot, stopped on: jumping to kernel code
Replies: 24
Views: 9470

RB1200 do not reboot, stopped on: jumping to kernel code

RB1200 RouterOS 5.23 Firmware 3.02 If i reboot, it fails. If I turn it off and turning it back on, it works. From serial terminal: ================== Rebooting... Stopping services... Restarting system. RouterBOOT booter 3.02 RouterBoard 1200 CPU frequency: 1000 MHz Memory size: 512 MiB NAND size: 1...
by osvaldotcf
Fri Feb 08, 2013 6:24 pm
Forum: RouterBOARD hardware
Topic: RB1200 Not found on Netinstall: REQ RECEIVED FAILED TO REPLY
Replies: 12
Views: 2590

Re: RB1200 Not found on Netinstall: REQ RECEIVED FAILED TO R

yes, The problem of netinstall is wine.
And i success with routerboard package 5.22 with serial cable and netinstall on windows 7 without firewall and without antivirus.
by osvaldotcf
Fri Feb 08, 2013 3:40 pm
Forum: RouterBOARD hardware
Topic: RB1200 Not found on Netinstall: REQ RECEIVED FAILED TO REPLY
Replies: 12
Views: 2590

Re: RB1200 Not found on Netinstall: REQ RECEIVED FAILED TO R

Did you try out to connect to the RB1200 over Winbox using both methods like IP and MAC address?
Yes, but fail.

And as RB do not boot, only one beep, winbox do not help!
by osvaldotcf
Fri Feb 08, 2013 12:17 pm
Forum: RouterBOARD hardware
Topic: RB1200 Not found on Netinstall: REQ RECEIVED FAILED TO REPLY
Replies: 12
Views: 2590

Re: RB1200 Not found on Netinstall: REQ RECEIVED FAILED TO R

Hello osvaldotcf, did you turn off the system firewalls on the systems you were trying out? FAILED TO REPLY I ask this because a connect must be there, related to the terminal message you have gotten. It would be really help all peoples to help you out in that situation if you will tell us all some...
by osvaldotcf
Fri Feb 08, 2013 3:29 am
Forum: RouterBOARD hardware
Topic: RB1200 Not found on Netinstall: REQ RECEIVED FAILED TO REPLY
Replies: 12
Views: 2590

RB1200 Not found on Netinstall: REQ RECEIVED FAILED TO REPLY

Why RB is not found by Netinstall? In the terminal with serial cable there bootp request, returns nothing in MS Windows, on ubuntu with wine, i get the messages below: REQ RECEIVED: FAILED TO REPLY recv bytes: 300 opcode: 1 htype: 1 hlen: 6 hops: 0 xid: 460c170e secs: 8 unused: 0 ciaddr: 0.0.0.0 yia...
by osvaldotcf
Thu Feb 07, 2013 10:21 am
Forum: RouterBOARD hardware
Topic: Omnitik in 2.4Ghz?
Replies: 9
Views: 4756

Re: Omnitik in 2.4Ghz?

Brazil also requests a Omnitik at 2.4Ghz.
The two antennas may have 10dBi or 12dBi.
Would be a great product!
With 8 dbi would be great.
It would be a great competitor for the Ubiquiti Unifi.
by osvaldotcf
Wed Feb 06, 2013 11:47 pm
Forum: General
Topic: RB1200 and Netinstall - netinstall can not find RouterBoard
Replies: 4
Views: 1952

Re: RB1200 and Netinstall - netinstall can not find RouterBo

You're right -
Use ether10 port on RB1200 to connect to Netinstall
If don´t work - buy serial cable and http://wiki.mikrotik.com/wiki/Manual:Netinstall
well, well, well
by osvaldotcf
Wed Feb 06, 2013 10:30 pm
Forum: General
Topic: RB1200 and Netinstall - netinstall can not find RouterBoard
Replies: 4
Views: 1952

Re: RB1200 and Netinstall - netinstall can not find RouterBo

Why?
In RB1200 port 10 comes with the label boot.

But i will try eth1

--------------
After try:
No success :-(

Thankyou.
by osvaldotcf
Wed Feb 06, 2013 8:57 pm
Forum: General
Topic: RB1200 and Netinstall - netinstall can not find RouterBoard
Replies: 4
Views: 1952

RB1200 and Netinstall - netinstall can not find RouterBoard

After upgrade one RB1200 to 5.23 and firmware 3.02, on boot only one beep is played.

I tried to recover with Netinstall, from a windows netbook and from other notebook with ubuntu (wine), and I can not see the RB on Netinstall. I try with network cable, i do not have serial cable.

Thanks for help.
by osvaldotcf
Wed Feb 06, 2013 5:46 pm
Forum: RouterBOARD hardware
Topic: Firmware 3.02 on RB 1200
Replies: 1
Views: 604

Firmware 3.02 on RB 1200

Is it okay to upgrade the firmware of RB1200 for the version 3.02, available along with RouterOS 5.23?
by osvaldotcf
Wed Feb 06, 2013 1:27 am
Forum: General
Topic: VLan, Bridge, Hotspot and switch - RB1200
Replies: 2
Views: 668

Re: VLan, Bridge, Hotspot and switch - RB1200

What I want to do is that the link to rb450 and the tower stay at the gates of the switch chip with the output link to the Internet and there is a port connected vlan 33 with pppoe server.
by osvaldotcf
Mon Feb 04, 2013 8:03 pm
Forum: General
Topic: VLan, Bridge, Hotspot and switch - RB1200
Replies: 2
Views: 668

VLan, Bridge, Hotspot and switch - RB1200

Hello, I'm starting here. I have the following configuration: - RB01 linked to RB02 through unmanaged switch 3com (SW01) - RB03 linked to RB02 directly - Radio R1 (AP) connected to the switch (SW01) using vlan.33 I would like the binding of RB01 and RB03 were of a switch on RB02 (rb1200). The issue ...