MikroTik

osvaldotcf

This is important!
Perhaps with scripts.

osvaldotcf

No, sorry.
My mistake .
I meant that I'm using dhcp and generating "simple queue " through DHCP with Radius .

osvaldotcf

command api to get bytes in and out from each dhcp simple queue
Anyone could help us?
thank you.

osvaldotcf

How the counters of bytes of simple queue work?

osvaldotcf

I need to save the customer usage accounting . I use dhcp with RADIUS . I'm getting via API values of bytes but do not understand them. I thought that accountants were ongoing but suddenly they restart even without reaching great values . Our customers have a session time out 10 min, but there i...

osvaldotcf

Return is in Framed-Ip-Address
Simple, no problem!

osvaldotcf

Is possible to configure DHCP for that IP be assigned from the sql database via RADIUS ?
Using Rlm_sqlippool ?
How can i do that ?

osvaldotcf

I need to create a network layout with two SXT . In the AP have a simple configuration with three other SXT accessing the internet by NAT . Also in AP , need to set up a bridge with vlan to interconnect a CCR Router Port (with vlan 3401) and a client (untagged) with a computer without vlan. AP: vlan...

osvaldotcf

Thank you very much.

osvaldotcf

Hello. I'm no slve the problem, I'm having is to have working WPA with RADIUS. CPEs can connect to access-list configured on the AP with the same password as the CPE, but does not connect when I put a different password in the access-list and the correct password on the RADIUS. I get this informatio...

osvaldotcf

None describes wpa peap.

Already RADIUS for hotspot and pppoe, my problem is with WPA2 / PEAP clients mikrotik and UBNT for mikrotik APs.

osvaldotcf

How can I migrate from UBNT to Mikrotik APs and CPEs with WPA2 / PEAP?

With UBNT RADIUS is very simple to configure WPA2/PEAP with username ans password. Register the AP on FreeRADIUS as client and configure username and password in the CPEs. WPA2/PEAP works!

How I do with Mikrotik?

osvaldotcf

Any one can comment this in actual environment of hardware and software?

Any idea to solve the problem of lack of public ips?

osvaldotcf

it seems that Mikrotik OS gets worse from release to release
sorry but i have enought !!
It's not a final release which means it's not ready for production use!

Yes but is not a Beta!
This is a Release Candidate! and ... 14!!!!!

osvaldotcf

Hello IP>>HotSpot>>Active Users>> Users Tx Rate , is not active on this Version. It was not active on RC11 also. Any suggestion ? Regards Do you use Bridge ? I had this problem in v6rc11. i was waiting for this fix. It seem has not been fixed http://forum.mikrotik.com/viewtopic.php?f=2&t=70207 ...

osvaldotcf

+1

Yes, i put several backup and when i restore ... no tx rate on hotspot!

osvaldotcf

did RouterOS v6rc12 resolve this?

No! neither v6rc13 !

osvaldotcf

RB450G - ROS 5.22 - HotSpot - Queue not show clients. Why customers do not appear on "simple queue"? Hotspot clients are not showing up on Simple Queue neither on terminal print command! Only the hotspot name appears /queue simple> print Flags: X - disabled, I - invalid, D - dynamic 0 D na...

osvaldotcf

Freeradius - Hotspot - VLAN over port ether1 as part of switch chip (switch1)

Why customers at a hotspot configured on a vlan over a port of switch1 chip (configured) of a RB1200 not appear in Simple Queue?

osvaldotcf

I have the same problem.
RB 1200 v6rc11

osvaldotcf

I have the same problem.
RB 1200 v6rc11

osvaldotcf

PPPoE.
There is no traffic on some clients, not at all.
To customers without traffic, on PPPoE, the first column is showing a D and not a DR.

osvaldotcf

Same Problem.

3 RB1200 same firmware/RouterOS

Current Firmware 3.02
RouterOS: v5.24

Same problem: Firmware 3.02 and v6rc11

osvaldotcf

This problem is fixed on V6rc11 ?

osvaldotcf

I have the same, or not, problem with RB1200 RouterOS v6rc11.

On hotspot all clients with 0 tx rate.

osvaldotcf

I Have the same problem with RB1200 RouterOS v6rc11.

osvaldotcf

I have the same problem!
Please, anyone!

osvaldotcf

The 1200 has the atheros 8316 switch chip. Therefore the following instructions would work to operate VLAN's in the switch chip itself. http://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features#Example_-_802.1Q_Trunking_with_Atheros_8316 The switch chip itself (as far as I can recall) can't manage ...

osvaldotcf

Could anyone help me with the configuration of RB1200 to use your switch chip to work with vlan with ip in RB itself?

osvaldotcf

Hello
I could not understand what is wrong with the following configuration:
- Switch Chip active
- Create a Vlan with 2020 /vlan interface with WinBox on port of the switch
- Add ip address to vlan 2020

This ip does not connect, no pings!

osvaldotcf

Hello I want to change the set rb800 + rb250gs by a rb1200. I would use the chip of switch of the rb1200. For the test I did had trouble setting a "software vlan" on the switch ports to put him ips. The RB1200 crashed when I began to ping to an IP on the network of the same vlan. Does any...

osvaldotcf

You can possibly do that with a switch chip function, but not with the bridge. I have never used the switch chip, especially for something like this setup, so I wouldn't be able to speak to if it is possible or not. I have searched this knowledge: in a vlan on port of switch chip put a IP. Does not...

osvaldotcf

also, should I just bridge ether2-6 and not bother with a switch for the AP's (I read not to use the RB as a switch)? Unless I'm mistaken the RB1200 has a switch chip, so that should work fine. Don't bridge, though. Use the switch chip. I think (not sure, don't have an RB1200) that you can only gro...

osvaldotcf

It does not work, or do not know where to get information!

Hi.
I have the following configuration:
Switch1: Port1+Port2+Porta3
Interface vlan added on port1 ( not on switch vlan)
Ip added in the vlan port1

This ip not ping on other RB with your ip configured with the same vlan.

osvaldotcf

Hello I want to change the set rb800 + rb250gs by a rb1200. I would use the chip of switch of the rb1200. For the test I did had trouble setting a "software vlan" on the switch ports to put him ips. The RB1200 crashed when I began to ping to an IP on the network of the same vlan. Does anyo...

osvaldotcf

We are a ISP and search for rules for de edge firewall for us.

osvaldotcf

What the firewall rules commonly used by you on the edge?

osvaldotcf

in firewall of this router try to drop the traffic between ether (4,5) and the other ethers

No, this is not the way SWITCH CHIP!

The operations must be made at the Chip Switch, not the firewall.

osvaldotcf

How can I separate traffic on two ports of a switch chip of a rb1200? Port 5 will have a cable, will pass traffic directly to port 4 linked to a firewall, both part of the switch of a rb1200. Ports 1, 2 and 3 should not see this traffic. The idea is that I'll be using a separate firewall and i want ...

osvaldotcf

+pin is closer to side of the router. If you look on the back of the router you can see that one pin is with square base (ground) and other is with round (+).

And as sergejs already replied, 12V 3A PSU.

Thank you

osvaldotcf

12V ; 3A PSU + near J11. Hello Sorry I have not expressed myself correctly. I need feed a RB1200 with 12v. I saw in the manual that is possible using the J11. What I do not saw in the manual is the indication what pin is the positive and what pin is the negative and what the amperage required in th...

osvaldotcf

RB1200 12v and 24v :

What polarity DC?
Can anyone advise the correct procedure for connecting on 12 volt?
What is the amperage?

The manual does not show the polarity nor the amperage to 12v.

osvaldotcf

Hello again, Seen here: http://forum.mikrotik.com/viewtopic.php?f=3&t=69442#p353357 Make sure reset jumper hole (http://wiki.mikrotik.com/wiki/Manual:Password_reset) is clean and both sides are not connected with metallic object. It can make configuration reset on every reboot. Perhaps during t...

osvaldotcf

RB1200 RouterOS 5.23 Firmware 3.02 If i reboot, it fails. If I turn it off and turning it back on, it works. From serial terminal: ================== Rebooting... Stopping services... Restarting system. RouterBOOT booter 3.02 RouterBoard 1200 CPU frequency: 1000 MHz Memory size: 512 MiB NAND size: 1...

osvaldotcf

yes, The problem of netinstall is wine.
And i success with routerboard package 5.22 with serial cable and netinstall on windows 7 without firewall and without antivirus.

osvaldotcf

Did you try out to connect to the RB1200 over Winbox using both methods like IP and MAC address?

Yes, but fail.

And as RB do not boot, only one beep, winbox do not help!

osvaldotcf

Hello osvaldotcf, did you turn off the system firewalls on the systems you were trying out? FAILED TO REPLY I ask this because a connect must be there, related to the terminal message you have gotten. It would be really help all peoples to help you out in that situation if you will tell us all some...

osvaldotcf

Why RB is not found by Netinstall? In the terminal with serial cable there bootp request, returns nothing in MS Windows, on ubuntu with wine, i get the messages below: REQ RECEIVED: FAILED TO REPLY recv bytes: 300 opcode: 1 htype: 1 hlen: 6 hops: 0 xid: 460c170e secs: 8 unused: 0 ciaddr: 0.0.0.0 yia...

osvaldotcf

Brazil also requests a Omnitik at 2.4Ghz.
The two antennas may have 10dBi or 12dBi.
Would be a great product!

With 8 dbi would be great.
It would be a great competitor for the Ubiquiti Unifi.

osvaldotcf

You're right -
Code: Select all
Use ether10 port on RB1200 to connect to Netinstall
If don´t work - buy serial cable and http://wiki.mikrotik.com/wiki/Manual:Netinstall

well, well, well

osvaldotcf

Why?
In RB1200 port 10 comes with the label boot.

But i will try eth1

--------------
After try:
No success

Thankyou.

osvaldotcf

After upgrade one RB1200 to 5.23 and firmware 3.02, on boot only one beep is played.

I tried to recover with Netinstall, from a windows netbook and from other notebook with ubuntu (wine), and I can not see the RB on Netinstall. I try with network cable, i do not have serial cable.

Thanks for help.

osvaldotcf

Is it okay to upgrade the firmware of RB1200 for the version 3.02, available along with RouterOS 5.23?

osvaldotcf

What I want to do is that the link to rb450 and the tower stay at the gates of the switch chip with the output link to the Internet and there is a port connected vlan 33 with pppoe server.

osvaldotcf

Hello, I'm starting here. I have the following configuration: - RB01 linked to RB02 through unmanaged switch 3com (SW01) - RB03 linked to RB02 directly - Radio R1 (AP) connected to the switch (SW01) using vlan.33 I would like the binding of RB01 and RB03 were of a switch on RB02 (rb1200). The issue ...

Search found 55 matches