MikroTik

mauricioisp

Hi guys, I just realized that Router OS 6.47.1 (and earlier) don't support BGP communities with 32bit ASN, I need to apply BGP community 0:269869 to an out filter but RouterOS is claiming that the value isn't valid. I found several other posts from mid-2000s about this limitation but I thought that ...

mauricioisp

Hi guys,
Any idea what could be causing this?

mauricioisp

Hi, I have a 10G connection in a datacenter and a 1G (symmetrical) connection in a remote location, latency is around 30ms, 0 jitter. When I run the bandwidth test directly between both sides (using the public IP addresses) I get 900+ Mbps. However when I create an EoIP (between one CCR1009 and one ...

mauricioisp

Yes, it's enabled I tried snmpwalk from a device within the network and works perfectly, but the Dude Agent isn't collecting SNMP data.

mauricioisp

I've tried everything and I'm facing the same issue.

mauricioisp

Any update about this topic? I'm testing the latest the dude version and using Routerboard as The Dude agent is still missing SNMP support. Mikrotik team please add it.

Thanks,

mauricioisp

any idea about this one?

mauricioisp

Hi krisjanis,
Do you have any update about this? I'm also facing this issue with version 6.45.5

mauricioisp

Hi guys,
I'm so frustrated that there's no The Dude client for Android... Please Mikroti consider it, it's a must. Ubiquit UNMS and several other NMS already have an Android app, but The Dude is still missing it.

mauricioisp

Hi guys, We use UserManager to authenticate via MAC and set queues for DHCP Servers in our network. We just upgraded several hundreds of our Mikrotiks in remote areas from 6.42.x to 6.45.5 and we started to receive thousands of calls complaining about no service. We checked the logs and find out tha...

mauricioisp

+1 it's very important

mauricioisp

Hi guys, any idea?

mauricioisp

Any idea?

mauricioisp

Entel

mauricioisp

Hi, I have a 400Mbps dedicated Internet pipe, when I run speedtest.net or fast.com with multiple connections I get a very stable 400Mbps. But when I run a speedtest.net or fast.com with single connection I can't pass over 100Mbps. According to the ISP they are not applying any kind of limitation, bu...

mauricioisp

Hi All, We really like your products and have installed several thousand during last quarter, and we want to continue buying more and more but we are facing a major limitation for our NOC with the new The Dude 6.43.4 version, it doesn't have text color in the Syslog. I know it sounds like something ...

mauricioisp

We have the same issue. Any know solution?

mauricioisp

Only your host must support 40G interfaces. CHR uses virtual interfaces.

What is the Virtualization platform that will offer the best performance in CHR? Xen? Hyper-V? Proxmox? ESXi?

Thanks,

mauricioisp

And if I build a x86 with CHR, does RouterOS support any 40Gbps card?

mauricioisp

Hi guys, We sell IP transit to some smaller ISPs and also offer High Speed to residential clients and our current Router solution is reaching the limit, I would like to deploy a new Mikrotik Router for 40Gbps of traffic. I don't consider the CCR1072 because it only has 10Gbps ports and I'm consideri...

mauricioisp

Hi guys, I have an ISP and cable operator, something very re you strange is happening in one sector of the network. Everything is working fine, with good SNR values, and suddenly all the CMs disconnect from the CMTS, the stay down for a few minutes (5-15 minutes), and then all of them come back with...

mauricioisp

Hi guys, I am running some tests with multicast video in my network. I'm able to access the video streams without issues in the multicast switch, but I don't know how to forward the multicast flows via a routed network (Layer-3), I'm attaching an image here showing my network diagram, the idea is to...

mauricioisp

Hi guys, I hope you're doing fine. I have a problem and if you can help me would be amazing. I need to interconnect my office in Sudamerica with a datacenter in Miami (USA), the connection in the Datacenter is pretty great 1Gbps. But in Sudamerica I only have access to Cable and VDSL connections. We...

mauricioisp

Hi guys, Sorry the title, but we really need help. Our edge router (CCR1036) is working rare, it's passing 1000Mbps traffic approx (we use 3 BGP peers) and then it connection goes almost down and traffic goes to 3Mbps!!! I have tried resetting routers, enabling just one BGP peer, etc...and nothing w...

mauricioisp

Hi ZeroByte,
Did you have any chance to check my last message?

mauricioisp

Hi ZeroByte, Thank you for your response. Actually I would like to force all our outgoing traffic through ISP2, and use TIWS (aka ISP1) only as a backhaul. I applied the filter to all destinations, just put 198.38.124.0/24 as an example of what I see in the route table. The 190.zzz.zzz.zzz/24 is our...

mauricioisp

Any one?

mauricioisp

Hi guys, I'm trying to force our outgoing traffic to use one of our IP transit providers with higher priority (the one with gateway 192.168.yy.yy ), but I'm unable to do that and the router still select as active the other ISP (the one with gateway 186.148.xx.xx ): [user@CCR X] > ip route print wher...

mauricioisp

Hi guys, I've two upstream providers (and use BGP) and I can want to modify the route to my network, I want to prefer ISP 1 to be used to access my networks instead of ISP 2. I set prepend 6 times in ISP2, so according to that logic ISP 1 should be used, but it's not!!! I did some looking glass test...

mauricioisp

Hi guys, I want to create an EoIP tunnel to pass some VLANs through it, I have an Internet connection which is very fast but maximum MTU is 1500 bytes. Using EoIP and then VLAN on it, will it work with such a small MTU size? If yes, do I need to configure anything else or just the EoIP and will it a...

mauricioisp

Anyone?

mauricioisp

Hi guys,
I need to create a Site-to-Site VPN between two sites, do you think that 2 x CCR1009-8G-1S should be able to have a 1Gbps VPN performance?

Thanks,

mauricioisp

Hi guys, I hope you're ok :) I would like to know if it possible to establish a reliable gigabit connection if I use a 40 pairs cable from one location to another. Before you say what the...? I can explain why it has sense. I have a 48 ports 1gbps switch + 4sfp+ in the first floor and I need to inst...

mauricioisp

Hi guys, My network has two main customer routers (and they're connected to our edge routers with BGP), some for certain customer (residnt) and another for others (buss), then there're many switches and I use a VLAN from each router to the customer's router. Now I want to route my network :manhappy:...

mauricioisp

any idea?

mauricioisp

Hi, I've RouterOS 5.25 installed on a XenServer and it runs great, yesterday I tried to update it to 6.15 and after a rebooted the unit it never came back...so I had to re-install, and decided to try with the RouterOS 6.15 ISO, but didn't boot, then tried with 6.14 and 6.13 and same thing...then tri...

mauricioisp

Hi,
Does anyone has The Dude 4.0-beta3 for x86?
The dude for x86 or routerboards is no longer available here: http://www.mikrotik.com/thedude

mauricioisp

Hi,
It will travel through Carrier's DWDM network, what do you think about that would be possible to easily upgrade speed just replacing transceivers?

mauricioisp

normis and sergejs please hear us. We would really like to see (and even pay) for a new The Dude version.
Thanks,

mauricioisp

Hi guys,
I hope you're doing fine. I would like to know if there's a way to automatically backup the User Manager DataBase (and routerOS config if possible too) to a microSD card? I'm using a RB450G with a 1GB microSD card.

Thanks,

mauricioisp

Hi guys,
I hope you're doing fine. I would like to know if there's a way to automatically backup the User Manager DataBase to a microSD card? I'm using a RB450G with a 1GB microSD card.

Thanks,

mauricioisp

I've exactly the same question. Anyone?

mauricioisp

anyone?

mauricioisp

Hi guys, I've some CCR1016 and CCR1036 and I would like to add an extra PSU for redundancy. I've some high quality 24V 5Amp PSUs, can I use them with CCRs? Or should I use 19V PSU? Should I do anything besides connect the secondary PSU to the internal PWR connector? I know this probably was asked be...

mauricioisp

Hi guys,
I hope you're doing fine. I'm trying to sell our last mile services to a local carrier, but they asked me for RFC2544 tests. Do you know if there's any computer based (free or not very expensive) solution to perform RFC2544 tests? I just know JDSU units, but they're very expensive.

Thanks,

mauricioisp

Hi,
I've an ISP and now we need more public IP addresses, but our RIR requested us to enable reverse DNS. Otherwise, they can't give us more IP addresses.
I'm using a Mikrotik Router as DNS Server (or cache), I would like to know how can I enable reverse DNS on my network.

Thanks,

mauricioisp

Hi guys, Major telecom company in our company will install a fiber optic Point to Point (private link) between our data center and one of our towers. They will install 10Mbps transceivers. However, if this's a private link, do you think it would be possible to replace these 10Mbps transceivers with ...

mauricioisp

Hi, I would like to run a 1KM fiber link between two offices, I want to use Mikrotik SFP transceiver S-3553LC20D, and my local cable provider sell this fiber optic cable, is it compatible? http://csmedia.corning.com/CableSystems/%5CResource_Documents%5Cspec_sheets_rl%5Cfo_cable%5C001U3F-A9403-29_NAF...

mauricioisp

Hi guys, I want to install a dual edge router array in my company, and I would like to know if you've any suggestion about my options. We've 2 Gigabit local connections (just national bandwidth) and 2 Fast Ethernet Transit connections. Alternative A Router A only handles local traffic (2 x Gigabit i...

mauricioisp

Hi,
I've a connection between two mikrotik routers and there're some switches between both routers, I would like to know how can I check if my network (switches) is honoring 802.1p prioritization?

Thanks,

mauricioisp

Hi normis, This is for residential buildings, we usually deploy some, 6-7, RB750UP (or ToughSwitch PRO) and then install one unmanaged FastEthernet 16 ports switch (powered using POE and then use a passive adapter to separate Ethernet and DC power) per floor, and then a RB951Ui-2HnD on each apartmen...

mauricioisp

Hi guys,
I would like to know if anyone know an inexpensive unmanaged Gigabit switch 16 ports with DC input (12V, 24V or 48V)??
Unfortunately CRS is out of my budget cause I need hundreds of them.

Thanks,

mauricioisp

Hi samsung,
And how can I check what is the maximum allowed L2MTU size of my unmanaged switch?
Thanks,

mauricioisp

Hi Normis,
Any plan?

Thanks,

mauricioisp

Hi Zod,
What do you recommend DSCP or 802.1p for QoS?
Thanks,

mauricioisp

Any idea?

mauricioisp

I added a simple filter to the outbound BGP, block everything, but my prefixes.

mauricioisp

Hi guys,
I would like to know if a VLAN or packet marked with 802.1p can keep his mark after passing through an unmanaged switch?
What about DSCP marked packets, can the mark pass even through unmanaged switches?

Thanks,

mauricioisp

Hi guys, I've a hybrid network I use Mikrotik Routers in the main NOC and Ubiquiti radios for the Wireless part, then I use unmanaged switches to each apartment and airRouter as Client Router, and then a VOIP ATA or VOIP Phone. Could you recommend me what is the best way to implement QoS to ensure g...

mauricioisp

Hi guys, I've multiple BGP links, and two with default route, the thing is I want to use one connection just for google services, so I'm thinking how to create a filter to allow only the IP blocks within Google's ASN. But my second question, I would like to only restrict that connection only for goo...

mauricioisp

Hi Mikrotik team,
Do you have any plan to support 100Mbps transceivers in your RB2011 or CCR?

Thanks,

mauricioisp

Hi Pcunite,
This guide is for failover, but not for QoS of the WAN interface.

Thanks,

mauricioisp

Hi guys, Any suggestion? The problem I've is using queue tree I can limit the upload bandwidth (and apply QoS) to my upload connection, but I can't do that with my download traffic. I need to do this on the WAN interface, and not on my LAN interface, cause I've multiple WAN connections with differen...

mauricioisp

I think that something like the current RB2011 with POE would be amazing...
5 Gigabit POE ports and 5 FastEthernet POE ports, plus one SFP

mauricioisp

Hi guys, A friend of mine just bought a small WISP and I will help him configuring his core router. He only has one public IP address and 800 customers. I would like to know if you know if there's any maximum limit of netflix streams using the same public IP address? Of course, each customer will ha...

mauricioisp

You can create prepend filters to "force" traffic from an specific Subnet to use AS1 and the other one use AS2, but still have failover.

mauricioisp

Hi Mikrotik team,
I would like to know why you don't have a native Winbox client for Mac?
I'm using "these emulators", but don't work as soon as Winbox on Windows.

I think this is important.

mauricioisp

Hi guys, I would like to know what is your favorite Customer management solution? I'm currently using User Manager, but it's pretty basic, and I would like to migrate to a "more powerful" solution. I've been considering Mikrobill, any suggestion? Do anyone know a platform able to offer dif...

mauricioisp

Hi guys,
Would be nice to have a router similar to 750up with more ports and one sfp of course all ports poe capable.

mauricioisp

Hi mrz,
Should I use content youtube or an address-list?

Thanks,

mauricioisp

Hi guys, In one of my sites I just had one WAN connection, but now I've more than one, I used to use Queue Tree to apply QoS in the LAN interface, but with 2 WANs no it's not a good idea, I would like to know if anyone know a way to do QoS on the WAN interface, but not limit the bandwidth on the LAN...

mauricioisp

Hi guys, We've two Internet connections with BGP and each one only gives me the default route, my ISPs say they can't give me FULL BGP. So, I would like to have one link dedicated only to youtube and netflix. And the other link for all the other traffic. My problem is that my ISPs give me default ro...

mauricioisp

Any suggestion?

mauricioisp

Hi guys, I've a NAT Rule + address list to do that, it works fine most of the time, but when I remove a user from the address list sometimes they are still redirected to the non-payers web page. I'm using this rule with ROS 6.6 Ip firewall / NAT add action=dst-nat chain=dstnat in-interface=\"vl...

mauricioisp

RouterOS on AWS for what ?

Send from my mobile phone using Tapatalk.

VPN concentrator.

mauricioisp

Hi guys,
Do anyone know if it's possible to install RouterOS on Amazon Web Services EC2 and run it as an instance?

Thanks,

Anyone?

mauricioisp

Hi guys, I've some public /24 using BGP and they're announced properly, I've filters to send only certain CIDRs and block everything else, synchronize Networks is enabled. Now I'm trying to create a small PtP using /30 public IP address (between the BGP router and the other router), I also created a...

mauricioisp

Hi guys,
Do anyone know if it's possible to install RouterOS on Amazon Web Services EC2 and run it as an instance?

Thanks,

mauricioisp

Hi guys, I've my own ASN with one transit provider and a local IXP. However, transit bandwidth (or a dedicated connection from my country to a data center in the US) is extremely expensive here, $100+/Mbps, but High Speed cable/FTTH are inexpensive, but have certain limitations, specially that you c...

mauricioisp

Hi guys,

I would like to know if there's any way to have stats about ASN (BGP) traffic, I mean, for example see how much traffic are we downloading from Google's AS, Netflix's AS, etc...

Thanks,

mauricioisp

SOLVED

mauricioisp

Hi guys,
More information, I noticed that IXP's routes are announced in my ISP BGP (all of them are listed on Advertisements), but in the BGP Instance I've everything disabled:

Redistribute Connected DISABLED
Redistribute Static DISABLED
Redistribute Other BGP DISABLED

Any suggestion?

Thanks,

mauricioisp

Hi guys, I've an Internet connection with ISP A using BGP (default route only), and now I added my first peering connection to our local IXP, the problem is when the local IXP BGP peer is established, I see that my ISP A downlink and IXP uplink get saturated after a few seconds 100Mbps! I don't know...

mauricioisp

Hi,
I would like to know if it's possible to use just one router for WAN load balancing, router/firewall and hotspot for WiFi?

Thanks,

mauricioisp

Hi,
Yes I sent an email to support@mikrotik.com last week (around monday) and I didn't receive any reply yet.

mauricioisp

Hi,
Any suggestion?

mauricioisp

Any suggestion?
It's a real issue for my network, I hasn't been able to use our cache server, and now I'm considering to come back to Cisco routers, please help me to avoid returning to the uncle Cisco.

mauricioisp

Hi normis,
I just had a long support session with Cachebox engineers and we figured out that it's a problem with the mikrotik router.

This packet mark and simple queue together counts the bandwidth twice!

Any suggestion?

Thanks,

mauricioisp

Hi, I'm implementing Cachebox in our network, it works like a charm, but when I enable the mikrotik simple queues I only reach half the bandwidth!! My WAN is port WAN, and my cachebox is port ether2 (CACHEBOX). My computer IP address is 170.3.5.100. add action=mark-routing chain=prerouting comment=\...

mauricioisp

Hi c0d3rSh3ll,
I already tried redirecting those IP addresses, but the issue is some of our ISP have their own Google Cache Servers and they're not part of the IP addresses under standard HE list.

mauricioisp

No one else?

mauricioisp

Hi guys, I currently have one BGP peer giving my the default route (+ stupid 100+ private IP prefixes...) and now I've my first peering connection (only certain national subnets) to a small local IXP (the fiber will arrive next week), and I would like to know what is in your opinion the best way to ...

mauricioisp

You can does with dst-address-list for all ip of youtube

Hi c0d3rSh3ll,
Did you try it? Do you have any thread link?

mauricioisp

Oh I see, and do you know any script?

mauricioisp

Anyone else having this issue?

mauricioisp

Thank you for sharing your experiences

I think I'm gonna use 2 antennas, one for each radio

mauricioisp

Hi,
interesting, but doesn't say if it's possible to redirect traffic based on destination domain name, not a certain protocol.
Any other suggestion?

mauricioisp

Hi, Today I had this issue again, when I use simple queues the download speed works fine, but the upload speed only reaches 1/3 of the limit...I configured a simple queue 50M/50M in my RB450G running ROS 6.4 and the download is great, but upload is only 17Mbps...When I disable the queues i get 200Mb...

mauricioisp

When are we going to know prices?

mauricioisp

mauricioisp

that looks like a serious issue. Does any have a 5GHz miniPCI-E card combined RB912, does it work fine?
I was thinking of the SR71E or another card with AR9280 chipset, does it work?

mauricioisp

What I like of this antenna is that it's a single antenna, I don't need two antennas per site, it makes installation look cleaner.

mauricioisp

Hi,
I've an entry level Peplink 210 which is great to forward only youtube and netflix traffic via cheap cable links, even selecting the right CDN server on my ISP. Do you think if it's any way to do the same using mikrotik rules?

Thanks,

mauricioisp

BTW, what about this one QCA9882?

mauricioisp

Hi,
I would like to know if RouterOS 6.4 is compatible with QCA9880 cards and 11ac mode?
I've been thinking of use this one: http://www.compex.com.sg/productdetaili ... cc1Panel=1

Thanks,

mauricioisp

Hi,
Anyone have use this antenna with Dual MIMO nStreme?
http://www.itelite.net/offer.php?n=106&lang=en, it looks pretty interesting, but I haven't found anyone who used this one with mikrotik radios with two MIMO 5GHz cards inside.

Any comment?

Thanks,

mauricioisp

It would be good at least 8ports.
RB780GUP
+1

/Paetur

Sent from my iPad using Tapatalk
+2

5 ports aren't enough for tower installs.

+3 I totally agree with that.

mauricioisp

Why should I adjust noise floor threshold to -120/-124 ?

Thanks,

mauricioisp

Hi,

I need to install one 5GHz antenna and one 2.4GHz antenna on the same mast, can I separate them just 30 cms vertically?

PS: Both antennas are pointing the same direction.

Thanks,

mauricioisp

Hi, I'm thinking of using one RB912-5GHz with a 5GHz miniPCI-E radio, so I will have two radios on the same device, I would like to know if it's any way to use only one antenna for both radios? I've been thinking of cavity filters before each radio, to only allow specific frequencies...what do you t...

mauricioisp

Hi inox,
That's pretty similar to the 160mbps aggregated throughput I can get with 2 rocket m5 in p2p. I was thinking of 200mbps+ performance, such as ligowave pro.

mauricioisp

Hi guys,
I'm considering to replace my Rocket M5s with the RB912UAG-5HPnD-OUT, I'm using 30dBi antenna and I've -50dBm signal strength, what would be the expected throughput with the RB912UAG-5HPnD-OUT?

Thanks,

mauricioisp

Hi, I've more information on this topic...here's the situation, our competitor offers monitoring services of the client bandwidth (domestic and international bandwidth), I suspect that the only way to do that is to use 2 VLANs, one for international and the other for national bandwidth, right? http:...

mauricioisp

Hi,
I'm trying to get a peering agreement with a local Content provider, but I need to measure the traffic from my ASN to their ASN. What method or program do you use to measure ASN to ASN traffic?

Thanks,

mauricioisp

Hi normis,
I understand. And what method do you recommend for the being time to set different bandwidth limits for domestic and international traffic?

Thanks,

mauricioisp

hi nz_monkey,
do you know if this new routing will be released in RouterOS 6.4?

Thanks,

mauricioisp

Hi pcnuite,
Thank you for your reply, the thing is I want to do that in our edge router, then we've 10 smaller routers and all our CPEs are in router mode...

mauricioisp

Hi guys, I've been offering same bandwidth for local and international traffic, but it has not been very cost effective, cause international bandwidth is 20x more expensive than national traffic. For that reason I would like to set different limits for international and local traffic. I've been thin...

mauricioisp

Do you think that method is better than EoIP bonding?

mauricioisp

mauricioisp

Hi,
I need to deliver 150Mbps Full-Duplex to one site, I know I can't get that bandwidth with a single radio, I would like to know if anyone can recommend me the best method to bond two wireless links (using Mikrotik or Ubiquiti) to get 150Mbps Full-Duplex?

Thanks,

mauricioisp

Hi IPANetEngineer,
We have our own ASN and IP address blocked assigned by LACNIC directly.
Our upstream provider give us only default route for the being time, but we will try to get a second pipe with partial route table (for all national IP addresses).

Thanks,

mauricioisp

Hi,
I've a CCR1016 with BGP and one fiber connection connected to it. Next week we will receive our second connection which also supports BGP, and I would like if you can recommend me different ways to load balance both connections? Any suggestion?

Thanks,

mauricioisp

I solved the issue, it was a problem with the Media converter Auto-negotiation. Thank you for your help.

mauricioisp

Hi Celtic,
It's 100BASE-BX.

mauricioisp

Hi,
I know this has been asked previously, but I just would like to know if anyone found a compatible one.
Is there any 100Mbps SFP Single mode LC connector transceiver compatible with RB2011 or CCR1036?

Thanks,

mauricioisp

100Mbps Full.

mauricioisp

Hi Nickshore, You're right, it definitely looks like a negotiating issue...I tried with Auto, 100Mbps Full, 100Mbps Half (and works better), I also tried on port 5 1Gbps, 100Mbps and same issue... Looks like the RB2011 is not compatible with MVR Fiber Converters http://ryohnosuke.net/img/2013/08/23/...

mauricioisp

Yes, I'm using 6.2, I had the same issue with 6.1.

Any idea how to test my speed with UDP against a local speedtest server?

mauricioisp

Hi guys, I've a very strange issue, we've a Cisco Router 1900 series installed in our office with BGP (default route + 1000 local routes) and we're able to achieve 100Mbps without issues, but when I replace it with a RB2011 it works and the BGP peer is UP, but I can't get more than 30Mbps down and 1...

mauricioisp

That's the point, using CLI I get that weird value, but using WEB UI or Winbox I've no problem...any suggestion? Maybe a bug?

mauricioisp

Hi, I ran a ping from our mikrotik server to 66.175.96.7, and we've -200% packet loss, only 27 packets sent and 81 received...Any idea what could be causing this? 66.175.96.7 56 117 163ms sent=27 received=81 packet-loss=-200% min-rtt=106ms avg-rtt=110ms max-rtt=163ms HOST SIZE TTL TIME STATUS 66.175...

mauricioisp

Hi guys,
I've a RB750UP and I've some outdoor units connected to it, in Ubiquiti ToughSwitch I can ground the unit easily, but I don't know where to ground the RB750UP.

I'm attaching an image here...

mauricioisp

I've used this before with a src-address parameter. /ip firewall nat add chain=srcnat action=src-nat src-address=192.168.0.1/24 to-addresses=x.x.x.x add chain=srcnat action=src-nat to-addresses=x.x.x.y The 192.168.0.0/24 net will nat to public ip x.x.x.x, and all others nat to x.x.x.y. I didn't wor...

mauricioisp

Hi, I just started using our own AS (public AS of course) and it's working great with most networks (specially to 72.21.92.82), but we've very high packet loss rate to some routes, but to other I've 0% packet loss. I tested the same IP (72.21.92.82) from a DSL connection of my upstream provider and ...

mauricioisp

Thank you guys, it's working like a charm now

mauricioisp

Hi, I'm trying to migrate my Cisco Router to my Mikrotik, and I'm unable to enable the BGP peer on it. This is the mikrotik BGP configuration: routing bgp instance print name="bgp1" as=XXXXX router-id=172.31.55.30 redistribute-connected=no redistribute-connected=yes redistribute-rip=no red...

mauricioisp

Any idea?

mauricioisp

Hi, I want to connect two locations separated over 3000KM from each other, and a Layer2 connection using traditional carriers is extremely expensive for a 100Mbps dedicated link, so I discarded this option. But I've an excellent Internet connection in Site A (1Gbps), but just low connections availab...

mauricioisp

Yeah. I would like to know a little bit more about your performance experience with cache mara. Approximately how much the basic license? They advertise awesome number of concurrent connections compared with Thundercache or squid.

Thanks

mauricioisp

Hi reinerotto,
You mean that the code seems pretty old in Thundercache 7.1 or an older version?
Thanks,

mauricioisp

Hi guys,
Anyone is using CacheMARA in your network? How it works? Does it performs better than Thundercache?

Thanks

mauricioisp

Hi, I've a mikrotik router doing NAT for some devices within my network, I've two different type of users, with separated VLANs and separated DHCP Servers. I've multiple public IP addresses in the router, but when I configure the NAT I use the same public IP for both NATs, how can I use one public I...

mauricioisp

Hi guys, I used this: /ip firewall layer7-protocol add name=Youtube regexp=videoplayback /ip mangle add action=mark-connection chain=prerouting comment="" disabled=no layer7-protocol="YouTube " new-connection-mark="Youtube Downloads" passthrough=yes protocol=tcp add act...

mauricioisp

Great, thanks folks! Do you think it will consume many CPU resources?

mauricioisp

Hi SwissISP,
Thank you for reply. Do you know how can I get the list of youtube IP addresses? I googled "Youtube IP address list" but I wasn't able to find it.

Thanks

mauricioisp

Hi guys, I've a medium size network here, we've a 20Mbps business class fiber optic connection with 1024 public IP addresses, so we've IP addresses in all our hosts, that works fine, but main problem now is that our fiber connection is very congested due to youtube, we don't want to block it, but we...

mauricioisp

Hi guys, I've a network that is currently full NATed, we want to move it to use public IP address to the hosts within the network and I don't want to use NAT 1:1 in all devices, cause I've many routers involved. We've our own AS number and public IP range (190.113.X.0/22) granted by LACNIC, so, we'v...

Search found 148 matches