I have to install this routerboard 50' in the air and I can't see a grounding screw or anything. It's going to be on a metal mast. And the provided POE injector is not grounded. What are my options?

I'm looking to do the exact same thing. Can you share if and how you did it?

Thank you,

Maybe I could remove port 2 from bridge, is there a way to forward all traffic from port2 to port1 so HDCP requests work and everything, like a bridge but without a bridge?

Hi, I have been struggling with this setup for a couple days and I am now out of ideas. What I want to do is "insert" a MT between a cable modem and a router already on site in a way that the MT is transparent to the router, while having it's own IP address. The brand, model or configurati...

Hi, everything is working it's just that in WinBox the average rate goes slightly over the limit-at I set. Let's say I set 960k I see the average go to 978k. I tried setting the burst to the limit-at so it won't burst but it's not working. Is there a way to really limit-at what I set? It used to wor...

Thank you, it seems to work now!

Hi, I tried moving my linux shaping config over to routeros but it's not working really well. eth5 is modem. 6.20 /interface bridge add mtu=1500 name=bridge1 protocol-mode=none /queue simple add limit-at=8192k/960k max-limit=8192k/960k name=queue1 queue=pcq-download-default/pcq-upload-default target...

Yes I am using it, sorry for not mentioning it before hand I thought it wasn't important.

It's working with the modem and everything. I would still like to know if possible why it wasn't working on eth4? And if there's a way that only eth4 see VLAN traffic, at the moment eth1-4 are in the bridge. Would I have to make a bridge with only eth4 in it and then bridge eth1-3 and the eth4 bridg...

I tried putting the VLAN on the bridge as you suggested and it seems to be working. I gave an IP to the VLAN bridge, could ping it from VLAN10 VM on eth4 and could not ping it from another VM on eth4, and that's exactly what I want. Why is it working when I bind the VLAN interface to the bridge brid...

The Linux client is a VM inside the ESXI host which will be the router. The VLAN 10 network is configured in ESXI I don't have anything set in the Linux VM.

I tried it last night and still could not get it to work. Here's the config I tried: /interface bridge add l2mtu=1594 name=bridge-vlan10 /interface ethernet set 0 name=ether1-master-local set 1 master-port=ether1-master-local name=ether2-slave-local set 2 master-port=ether1-master-local name=ether3-...

I removed eth4 from the switch and bridged it instead. I will try the config tonight and see if it works.

Here's a quick plan : SWITCH _________ |_|_|_|_|_| 1 2 3 4 5 | | | | | | | | | | | | | | | / | | | | / / | | \ / / / | \ / / / | \ | | | | \ | | | | \ | | | | \ | | | | \ | | | | \ PC PC PC ESXI MODEM | | | |\ | UT UT UT UT \ | | | | | \ | | | | | \ | | | | | \ | | | | | VLAN10 VLAN10 | | | | | | | ...

Found out how to see config, here : /interface bridge add l2mtu=1594 name=bridge-vlan10 /interface ethernet set 0 name=ether1-master-local set 1 master-port=ether1-master-local name=ether2-slave-local set 2 master-port=ether1-master-local name=ether3-slave-local set 3 master-port=ether1-master-local...

Hi, I've been searching the web high and low for tutorials, guides and whatever I could find to help me to no avail. I've been working with VLANs in the past a little bit, I still have problems grasping some details but I get the big picture of VLANs. What I want to do is, with a 5 port switch : eth...