MikroTik

Lifz

The current implementation of L009 has basic passive PoE (ON or OFF), it doesn't fully support the optional auto-sensing feature for the 'Auto-on' mode.

Lifz

Please send an email to MikroTik support and include a supout.rif file.

Lifz

Updated hAP ax3 from 7.11.2 to 7.12rc7 and all VETH interfaces are gone... :(

Please downgrade to v7.11.2, generate a supout file, upgrade to 7.12rc7, generate a new supout and send both files to support@mikrotik.com.

Lifz

CHR v6 has one partition but CHR v7 has two.

you need to edit the install script part where you mount an image with offset, e.g:

mount -o loop,offset=512 /tmp/chr.img

and change to:

mount -o loop,offset=$((512*65570)) /tmp/chr.img

Lifz

Check your disk space while deploying your second container.

Lifz

CHR does not support UEFI.

Lifz

It will be fixed with a Linux kernel update.

Lifz

Please monitor system resources while pulling container image. Does router hdd free space not shrink?

Lifz

Are you using CHR or x86 on bare metal hardware? Has your CHR instance minimum required allocated amount of RAM? The minimum required RAM depends on interface count and CPU count. You can get an approximate number by using the following formula: · RouterOS v6 - RAM = 128 + [ 8 × (CPU_COUNT) × (INTER...

Lifz

Did you change your CPU type to Default (kvm64)?

Lifz

By default Quemu Guest agent is disabled, you can enable it in VM options under Quemu Agent.
Note: Default CPU type should be selected Default (in our case it is Default (kvm64)).

Lifz

Please send supout to support@mikrotik.com.

Lifz

Please send the supout.rif file from your device to support@mikrotik.com

This article explains how to make a supout.rif file:
https://help.mikrotik.com/docs/display/ROS/Supout.rif

Lifz

It is a known issue, Snowzach, a user has described a potential solution: viewtopic.php?p=981824#p981824

Lifz

The KVM package is now unsupported, and it is recommended to use the container feature, which has been supported since RouterOS 7.
https://help.mikrotik.com/docs/display/ROS/Container

Lifz

Such information can be found on the device specification page. RB5009UG+S+IN https://mikrotik.com/product/rb5009ug_s_in · CPU temperature monitor Yes RB5009UPr+S+IN https://mikrotik.com/product/rb5009upr_s_in · CPU temperature monitor Yes · Current Monitor Yes · PCB temperature monitor Yes · Voltag...

Lifz

*) x86 - improved igc driver support;
What has included in igc driver?

support for Intel I226 eth controller

Lifz

All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. If you’re using PoE-out to power other devices, the board will choose the source with the highest voltage (DC jack or the 2-pin connector) to power those. https://i.mt.lv/cdn/product_files/RB5009UPrS...

Lifz

No, PoE is not isolated, nor is the device's powering (DC-Jack, 2Pin).

Lifz

CCR2004-1G-12S+2XS - https://i.mt.lv/cdn/product_files/CCR20 ... 200459.png
CCR2004-16G-2S+ - https://i.mt.lv/cdn/product_files/CCR20 ... 210931.png

Lifz

Yes, this is normal behavior. Depending on the model it can be 1 to 4 IRQ per one fan rotation.

Lifz

The temperature value is provided by SFP modules. If your device does not have attached SFP modules that can provide temperature values, it won't be shown in health, and you will not be able to use OID .1.3.6.1.4.1.14988.1.1.3.10.0

Lifz

Did you read product specification? There is no information that this device can be powered by providing current through ground.

Lifz

Try this link: https://download.mikrotik.com/routeros/ ... 6.44.6.npk

Lifz

https://www.virustotal.com/gui/file/793 ... /detection

Winbox is fine, that was fluke false-positive

Lifz

No, you cannot change it. But you can create dozens of virtual ap for both wireless interfaces. https://wiki.mikrotik.com/wiki/Manual:Interface/Wireless#Virtual_interfaces Note: you can create up to 127 virtual interfaces per physical interface. It is not recommended to create more 30, since the per...

Lifz

Contact you local distributor, and ask them https://mikrotik.com/buy/asia/vietnam

Lifz

It is leds on the R11e wireless modem, they lit when 2.4Ghz link is established.

Lifz

What SFP + modules are used, what is their temperature?

Lifz

Did you read S+RJ10 general guidance?
https://wiki.mikrotik.com/wiki/S%2BRJ10 ... l_guidance

Lifz

None of these are fake. Why do you think any are fake? Any reason? Yes, MikroTik has many factories now. In many countries. They provide this compare photos to say that china model is fake . so Why the Lithuania model just have a mikrotik adhesive label on back of it and Don't have a hard logo on p...

Lifz

This is MikroTik user forum. Your question should be asked at Huawei forum.

Lifz

Contact MikroTik support and send supout.rif file with the latest stable RouterOS version.
https://mikrotik.com/client/support

Lifz

Please contact MikroTik support by email: support@mikrotik.com, providing supout.rif file from your devices. Also please describe your issue with details (how you are powering your device, etc.)

Lifz

If an issue still occurs after a firmware upgrade, write to support@mikrotik.com, providing supout.rif files from both devices.

Lifz

Did you look at this example?
https://wiki.mikrotik.com/wiki/Manual:I ... sec_tunnel

Lifz

BestVPN is one you make yourself, host CHR somewhere and use native Mikrotik protocols (EoIP, IPIP, etc.) Generally avoid TCP based protocols (SSTP, OpenVPN) for performance reasons (single TCP connection), always prefer UDP ones (PPTP, L2TP,...). Obviously it all depends on what you are trying to do.

Lifz

hEX PoE can power at/af mode B (4,5+)(7,8-) compatible devices, if 48-57 input voltage is used.

Did you power hEX PoE with required PSU?

Lifz

Your StarTech ST10GSPEXNDP is not supported. At the link below you may find supported ethernet chipsets:
https://wiki.mikrotik.com/wiki/Supporte ... t_chipsets

Lifz

Hi, all the Mikrotik lovers! I need your help? I'm looking for a best practice for the Mikrotik Firewall Filer Rules. Maybe someone has a best practice for the Firewall filter rules in one place. This will help me a lot. Thank you C At official MikroTik wiki page you may find a lot of useful manual...

Lifz

The equipment is new, they have no more than a week of use. To get them to operate, I had to uninstall certain packages and stay alone with the basics, that way I achieved a space of 4 MB approx. Now if you save the settings and they remain after the restart. However, there is still not enough spac...

Lifz

Does it mean that LTE modem that is in the USB slot won't work?

Could you please describe to us how you are planning to connect USB interface to devices which do not have USB?

Lifz

According to the manufacturer of NAND chips, up to 5 blocks can be bad when NAND is manufactured, and up to 80 bad blocks could develop during operation, but it will not disturb the operation of your router, because complex workaround mechanisms are in place, that will copy the data to another block...

Lifz

Upgrade your device to latest stable or long-term RouterOS version, Winbox should be upgraded too.

Lifz

What's the point if you do not read it anyway?

Lifz

what about shortcuts guys ? :-) https://forum.mikrotik.com/viewtopic.php?f=21&t=137745&p=679086#p679086 What shortcuts? Where? Your link also doesn't explain what you want https://forum.mikrotik.com/viewtopic.php?f=21&t=139189&p=686485#p686485 I just dream about winbox, with optiona...

Lifz

Is there any ETA for long-term release which will fix vulnerabilities? You didnt read the thread, did you? I did, so far there has been only "as soon as possible". It's been 3 days! I don't get it why it is taking so long.. Fixes for CVE-2018-14847 were released for all channels at same d...

Lifz

Please send supout file from your router to support@mikrotik.com.
File must be generated while router is not working as suspected or after some problem has appeared on device.

Lifz

No, since this model has SPI flash, MetaRouter is not supported.

Lifz

This device might be incompatible with R11e-LTE international modem.
https://i.mt.lv/cdn/rb_files/1557999615 ... series.pdf

Lifz

You may use firewall rules to prevent login brute-force: https://wiki.mikrotik.com/wiki/Brutefor ... prevention

Lifz

Different hardware and switching possibilities:

https://mikrotik.com/products/compare/C ... G-2SplusRM

https://mikrotik.com/product/CRS125-24G ... estresults
https://mikrotik.com/product/CRS326-24G ... estresults

Lifz

Please try to follow these steps to load the backup bootloader: 1) Power your device off; 2) Press and hold reset button; 3) Power device on; 4) Hold reset button pressed for 1-2 seconds and then release; 5) If device boots up, then run command "/system routerboard upgrade". If previously ...

Lifz

Please send supout file from your devices to support@mikrotik.com.

Lifz

What's new in 6.42 (2018-Apr-13 11:03):
*) chr - added "qemu-guest-agent" and "virtio-scsi" driver on KVM installations;

Please upgrade your CHR RouterOS.

Lifz

2011 ok 951G ok hap ac lite...................... couldn't update to stable or testing from 6.43.11, went to 6.42.12 long..... ok. Retries to stable or beta nothing...... still stuck on long term. u can get the support file from here. https://mega.nz/#!JnZ1iIZL!MT9wQ2vhAXA4o0tSC2d3Q6LMz8vj93Uwv_xZn...

Lifz

MetaRouter is not supported on your device.
https://wiki.mikrotik.com/wiki/Manual:M ... r#Overview

Lifz

Please send supout file from your router to support@mikrotik.com.

Lifz

block all and allow know safe sites

Lifz

If you are using the latest RouterOS and firmware please contact the support@mikrotik.com attached the supout.rif file from the router generated during or after issue. Otherwise, upgrade RouterOS and firmware.

Lifz

At first upgrade your CCR to latest RouterOS and firmware version. It may help.

Lifz

/system package update> set channel=

https://wiki.mikrotik.com/wiki/Manual:U ... ase_chains

Lifz

Update your Winbox to 3.18

Lifz

Are static DNS added?

https://wiki.mikrotik.com/wiki/Manual:I ... NS_Entries

Lifz

No, in logs/suppout viewer you can see only an account name, what was used.

Lifz

Why do not use implemented RouterOS methods?
https://wiki.mikrotik.com/wiki/Manual:P ... Monitoring

Lifz

Please contact the support@mikrotik.com attached the supout.rif file from the router generated during or after issue:
https://wiki.mikrotik.com/wiki/Manual:S ... utput_File

Lifz

Please contact the support@mikrotik.com attached the supout.rif file from the router generated during or after issue:
https://wiki.mikrotik.com/wiki/Manual:S ... utput_File

Lifz

How I do resolve problem with no free disc space to upgrade firmware? I have HAP Lite with old FW, when I try to upload new pkg, - see error, "You have only 6.4mB of free space", Write error.. and new FW pkg is 7+ mBytes.. What i can delete for upgrade fitmware? Total is 16 mbytes.. AutoU...

Lifz

Please contact us at support@mikrotik.com with descriptions

Lifz

Or you can take a case from 2011...

Lifz

How will i do it with netinstall

Read this article: https://wiki.mikrotik.com/wiki/Manual:Netinstall

Lifz

At first try load backup bootloader:
https://wiki.mikrotik.com/wiki/Manual:R ... up_loaders
Or use Netinstall:
https://wiki.mikrotik.com/wiki/Manual:Netinstall

Lifz

Read this thread: viewtopic.php?f=2&t=134793

Lifz

http://i.imgur.com/d6i7AHO.jpg http://i.imgur.com/zhGQS7q.jpg Signal is excelent through 2 concrete walls (-51 on android phone) and also higher than an standard RB951Ui-2HnD with 2-5dbi. With standard tplink 841 signal was very poor and loose conectivity very often. This is just a testing projects...

Search found 75 matches