Community discussions

MUM Europe 2020

Search found 17 matches

by Kim
Mon May 23, 2016 5:22 pm
Forum: General
Topic: Hairpin NAT configuration
Replies: 26
Views: 5387

Re: Hairpin NAT configuration

I'll try to look into it.
Thank you so much for your help, Sob - couldn't have done it without you!

Thanks!

/Kim.
by Kim
Sun May 22, 2016 10:40 pm
Forum: General
Topic: Hairpin NAT configuration
Replies: 26
Views: 5387

Re: Hairpin NAT configuration

THANK YOU SOB! You made me think... I thought that the SURFER log entry was some native stuff in the RouterOS... I am sorry Sob - your comment made me understand that it was not, so I went through my settings and found a "Filter Rule" I made some years ago, when I set up a guest wireless network. I ...
by Kim
Sun May 22, 2016 9:37 am
Forum: General
Topic: Hairpin NAT configuration
Replies: 26
Views: 5387

Re: Hairpin NAT configuration

Yes both D and E are on the same net. This is my setup regarding this HTTP traffic This is hit when I come from WAN add action=dst-nat chain=dstnat comment="HTTP 1" dst-address=\ B dst-port=80 protocol=tcp to-addresses=\ D to-ports=80 This is hit when I come from LAN add action=dst-nat chain=dstnat ...
by Kim
Sun May 22, 2016 12:27 am
Forum: General
Topic: Hairpin NAT configuration
Replies: 26
Views: 5387

Re: Hairpin NAT configuration

I hit the second dst-nat with the following in the log: dstnat: in :bridge-local out :bride-local, src-mac E , proto TCP (SYN), E -> A :80, len 52 SURFER forward: in :bridge-local out :bridge-local, src-mac E , proto TCP (SYN), E -> D :80, NAT E ->( A :80-> D :80), len 52 Was I supposed to hit the s...
by Kim
Sat May 21, 2016 4:32 pm
Forum: General
Topic: Hairpin NAT configuration
Replies: 26
Views: 5387

Re: Hairpin NAT configuration

Yes I have the source nat setup like this: /ip firewall nat add chain=srcnat src-address= 192.168.0.0/24 \ dst-address= D protocol=tcp dst-port=80 \ out-interface=bride-local action=masquerade Still it's not working... It's the first NAT rules in the NAT table, so I don't think that other rules can ...
by Kim
Sat May 21, 2016 3:29 pm
Forum: General
Topic: Hairpin NAT configuration
Replies: 26
Views: 5387

Re: Hairpin NAT configuration

This is my setup: http://normannfoto.dk/setup.png A = ISP IP B = My router external IP C = My router internal IP D = My webserver IP This is my firewall NAT setup: /ip firewall nat add chain=dstnat dst-address= B protocol=tcp dst-port=80 \ action=dst-nat to-address= D What i tried just now is this: ...
by Kim
Sat May 21, 2016 11:12 am
Forum: General
Topic: Hairpin NAT configuration
Replies: 26
Views: 5387

Re: Hairpin NAT configuration

Check wiki and understand what exactly happens with addresses when packets goes through router. Then just watch what happens on your router. RouterOS is great in this regard, every rule has live counters, you can add extra logging rules to prerouting, forward or postrouting, to more easily and reli...
by Kim
Sat May 21, 2016 10:51 am
Forum: Beginner Basics
Topic: Tutorial for setting up 2 wireless networks?
Replies: 13
Views: 6774

Re: Tutorial for setting up 2 wireless networks?

I followed this tutorial, and got it to work.
http://www.wirelessinfo.be/index.php/mi ... pages/vap1
by Kim
Tue Jul 09, 2013 10:16 pm
Forum: Beginner Basics
Topic: Tutorial for setting up 2 wireless networks?
Replies: 13
Views: 6774

Re: Tutorial for setting up 2 wireless networks?

Well - I already tried that, without any luck.
Anyway - I don't think we get any further.
Thanks for your time, Rudios!
by Kim
Tue Jul 09, 2013 4:46 pm
Forum: Beginner Basics
Topic: Tutorial for setting up 2 wireless networks?
Replies: 13
Views: 6774

Re: Tutorial for setting up 2 wireless networks?

With this setup, I get an IP address in the given range. But no access to the Internet...
by Kim
Mon Jul 08, 2013 8:58 pm
Forum: Beginner Basics
Topic: Tutorial for setting up 2 wireless networks?
Replies: 13
Views: 6774

Re: Tutorial for setting up 2 wireless networks?

Hi again. Now, I did what you said. 1) I Created an "IP Pool" (pool 1), and bound wlan2 to it, under "DHCP Server". 2) I created the firewall entry. Now, when my device try to connect, it is not accepted - I don't get an IP address. Under "IP Pool" I changed the original "dhcp" pool to point to "Nex...
by Kim
Mon Jul 08, 2013 6:24 pm
Forum: Beginner Basics
Topic: Tutorial for setting up 2 wireless networks?
Replies: 13
Views: 6774

Re: Tutorial for setting up 2 wireless networks?

Hi Rudios. Thanks for your reply - really appreciate it! My goal is to have a separate wireless ap, on a separate network - a separate IP range, so guest can connect to the Internet without having access to my local network. I did what you tell me to - and a bit more, collected from other instructio...
by Kim
Sun Jul 07, 2013 4:01 pm
Forum: Beginner Basics
Topic: Tutorial for setting up 2 wireless networks?
Replies: 13
Views: 6774

Re: Tutorial for setting up 2 wireless networks?

The information that you give here, is found all over the place. What I need is a tutorial. 1. Do this (and maybe even a "because...") 2. Do this 3. etc... When you say "Check your firewall rules in order to let the new network be able to connect to the internet" I simply don't know how to do that p...
by Kim
Sat Jul 06, 2013 9:30 pm
Forum: Beginner Basics
Topic: Tutorial for setting up 2 wireless networks?
Replies: 13
Views: 6774

Tutorial for setting up 2 wireless networks?

Hi.
I simply can't figure out how to configure one router to host 2 seperated wireless networks, one for private (on one IP range) and one for guests (on another IP range).

Can anyone point me to a proper tutorial - or maybe in a simple way explain from scratch?

Thanks.
by Kim
Tue Mar 05, 2013 8:29 pm
Forum: Beginner Basics
Topic: NAT; opened ports are not reachable from the local network
Replies: 16
Views: 3354

Re: NAT; opened ports are not reachable from the local netwo

I suggest that you upload output from /export compact - otherwise we are just guessing. :) Hi Again - thanks for your help! - sorry for the delay. My setup is as follows: /interface bridge add admin-mac=**:**:**:**:**:** auto-mac=no l2mtu=1598 name=bridge-local \ protocol-mode=rstp /interface wirel...
by Kim
Fri Mar 01, 2013 10:55 pm
Forum: Beginner Basics
Topic: NAT; opened ports are not reachable from the local network
Replies: 16
Views: 3354

Re: NAT; opened ports are not reachable from the local netwo

Hi - thanks for answering. Add hairpin NAT. See the link in the first post of the thread. I did that as one of my first tries, but that's not doing it... I have no out-interface called LAN (I'm referring to the masquerade rule), but assume WLAN1 is the right one? When I hit the domain (from inside t...
by Kim
Fri Mar 01, 2013 9:34 pm
Forum: Beginner Basics
Topic: NAT; opened ports are not reachable from the local network
Replies: 16
Views: 3354

Re: NAT; opened ports are not reachable from the local netwo

Hey. I have been struggling with this problem for a week now. I have followed all examples I could find, but nothing works. Something is wrong and I can't see through it all - I guess I don't understand some basic logic that everybody else gets... I have a web server, and want to forward port 80 to ...