Community discussions

MikroTik App

Search found 50 matches

by ilnicchio
Thu Jul 20, 2017 1:42 am
Forum: Wireless Networking
Topic: NV2 Sync
Replies: 5
Views: 1624

Re: NV2 Sync

Quote!!!
by ilnicchio
Thu May 04, 2017 4:26 pm
Forum: Wireless Networking
Topic: PtMP maximum wireless performance
Replies: 17
Views: 7878

PtMP maximum wireless performance

Hi, we have an ideal case in which we want understand the maximum capacity possible with mikrotik equipment: 26 CPEs (all ros >=6.30, 802.11n MiMo 2x2, SNR>=46db, all signals better than -70). 1 AP with RB711GA ROS 6.36.4, nv2, 20/40Ce, 5Ghz-only-n PtMP-test.png In auto we can reach 30-35Mbps of sec...
by ilnicchio
Fri Jan 08, 2016 4:43 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 210235

Re: Cloud Hosted Router

I also want to use CHR with XenServer 6.5.0 but doesn't start also with viridian=false... what we need to do?
by ilnicchio
Thu Aug 20, 2015 1:57 am
Forum: General
Topic: MU-MIMO do you plan it Mikrotik?
Replies: 10
Views: 4568

Re: MU-MIMO do you plan it Mikrotik?

802.11ac wave2 support (Qualcomm? Quantenna? Broadcom?)...
but we want beamforming
spectral-scan
dynamic wireless channel selection with continuous improvement wireless mode (like mimosa and ubiquity does on their device)
by ilnicchio
Thu Aug 20, 2015 1:53 am
Forum: RouterBOARD hardware
Topic: NEW PRODUCTS WISHLIST 2015
Replies: 50
Views: 9207

Re: NEW PRODUCTS WISHLIST 2015

Base Station and CPE with 802.11ac wave2 full support! Improvement of wireless performance from the point of view of: - sync(GPS) - TDMA - auto channel selection (base not only on information available on AP but also taking in decision the info from CPE (like spectrum usage) (like Mimosa promise) - ...
by ilnicchio
Tue Nov 04, 2014 11:33 am
Forum: General
Topic: eduroam: VLAN assignment based on RADIUS 802.1x reply
Replies: 40
Views: 17279

Re: eduroam: VLAN assignment based on RADIUS 802.1x reply

Any update?
This topic it's very interesting also for us.
Proposing MK in a institutional place require more often this kind of requirement...
by ilnicchio
Thu Sep 25, 2014 5:16 pm
Forum: General
Topic: gps sync
Replies: 8
Views: 2942

Re: gps sync

We cannot wait to long to understand what mikrotik will do about wireless performance and stability . The better tech it's now at the same price. So we need to understand what's the roadmap because without this we need to migrate to better performing tech. Considering this I can say that ubiquity ha...
by ilnicchio
Tue Feb 04, 2014 11:28 am
Forum: General
Topic: 6.9 released!
Replies: 223
Views: 85166

Re: 6.9 released!

pptp appears broke, trying to manage winbox while in the tunnel, different sections are blank, then winbox shows disconnected sstp also does not appear to be working at this point either. it does not, get an error at verifying username and password, then windows times out with error 628...... i dow...
by ilnicchio
Wed Sep 04, 2013 11:21 am
Forum: General
Topic: after upgrade to 6.3 cannot generate certificate-request
Replies: 33
Views: 28379

after upgrade to 6.3 cannot generate certificate-request

ther error is: failure: failed to write private key file
by ilnicchio
Mon Jul 09, 2012 12:03 pm
Forum: The Dude
Topic: Vote for new DUDE features!
Replies: 117
Views: 49140

Re: Vote for new DUDE features!

Ability to select "Ricezione confermata" for only a specified amount of time like (1h, 4h,1d,1w, etc.).
This permit to keep track during the time of the failure of some device without lost someone in "ricezione confermata" status for years...
by ilnicchio
Mon Jan 16, 2012 9:56 am
Forum: Wireless Networking
Topic: Best sector antenna dual slant 5ghz
Replies: 3
Views: 1367

Re: Best sector antenna dual slant 5ghz

will be very interesting also for us!!!
by ilnicchio
Mon Aug 01, 2011 2:14 pm
Forum: General
Topic: Virtual AP and NV2
Replies: 48
Views: 18009

Re: Virtual AP and NV2

the sergejs answer it's not a real answer for my problem.
We need to implement a multiprovider network based on MPLS/VPLS on the backhaul side and VAP/VPLS on the acces side...
How we can do it?
by ilnicchio
Tue Jul 19, 2011 10:39 pm
Forum: General
Topic: Virtual AP and NV2
Replies: 48
Views: 18009

Re: Virtual AP and NV2

Any news about VAP in NV2 protocol?
Why we're loosing functionality with this new wireless protocol?
Say us that your are thinking about it... please...
by ilnicchio
Tue Jul 19, 2011 10:36 pm
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 31658

Re: New Products

will be in the future something like this? [*]2 or more Gbit ethernet interface with at least 1526 byte L2MTU [*]1 minipci port (or 1 integrated 802.11n MiMo radio module normal or H version) [*]no moving part (so no fan) [*]around $200 price We thinks that this is what a professional wisp need to h...
by ilnicchio
Thu Apr 28, 2011 11:16 am
Forum: General
Topic: Virtual AP and NV2
Replies: 48
Views: 18009

Re: Virtual AP and NV2

How can we implement this kind o solution??? We have a very big project, where we spend many word about the very nice feature of Virtual AP... How we can do the same in other way?... HELP US!!!
by ilnicchio
Thu Apr 14, 2011 11:33 am
Forum: General
Topic: Virtual AP and NV2
Replies: 48
Views: 18009

Re: Virtual AP and NV2

Yes there is a very usefull things that i can do with virtual AP:
I can give to some customer the virtual wisp service, creating a virtual ap for the customer(virtual wisp), I can automatically assign the client to the virtual wisp vlan basing on SSID.... how I can do the same with nv2?
by ilnicchio
Sat Jan 08, 2011 2:58 am
Forum: The Dude
Topic: 4.x License upgrade using the Dude instead of Winbox?
Replies: 11
Views: 4477

Re: 4.x License upgrade using the Dude instead of Winbox?

Ok, I understand, my question is: there's a method to do the upgrade job automatically? also if needed interacting with a API or script but without the needing of a person that connect winbox to each rbs to do the license format conversion... Any kind of automatism can be usefull... Thanks for your ...
by ilnicchio
Thu Jan 06, 2011 3:23 am
Forum: Wireless Networking
Topic: wds, mesh and 11n
Replies: 3
Views: 2234

Re: wds, mesh and 11n

???
by ilnicchio
Wed Jan 05, 2011 8:33 pm
Forum: The Dude
Topic: 4.x License upgrade using the Dude instead of Winbox?
Replies: 11
Views: 4477

Re: 4.x License upgrade using the Dude instead of Winbox?

Ok I understand that I can't upgrade to 3.30 for client with old licences (more than 700) and that I NEED to connect to each client to do the client license upgrade, it's right? there no method to send a list of old keys to upgrade to mikrotik and receive the key files that we could send via ftp to ...
by ilnicchio
Thu Dec 30, 2010 1:47 am
Forum: The Dude
Topic: 4.x License upgrade using the Dude instead of Winbox?
Replies: 11
Views: 4477

Re: 4.x License upgrade using the Dude instead of Winbox?

Hi, I want to update all my network to the new nv2 protocol (that I think is the near future of wireless 802.11n based broadband), but i need to use some script or automated method to update the client (CPE) that are more than 1000 (we have a set of script but the problem is the license upgrade). I ...
by ilnicchio
Mon Dec 27, 2010 9:00 pm
Forum: Wireless Networking
Topic: wds, mesh and 11n
Replies: 3
Views: 2234

Re: wds, mesh and 11n

I've got the same issue. And the same again if I want to use nstream or nv2...
Why? There some incompatibility between wireless protocol and hwmp+? (i try 4.16, 5rc5 and 5rc6 with lastest firmware)
by ilnicchio
Tue Mar 17, 2009 1:00 pm
Forum: General
Topic: Bonding ethernet interface between 493ah and 1000 with alb
Replies: 0
Views: 527

Bonding ethernet interface between 493ah and 1000 with alb

I tried to bond 2 ethernet interface with alb method (ROS3.22). I assigned one ip address for each bonding interface and now I have one 493ah with the ip 4.4.4.1/24/bondInterf and one with rb1000 4.4.4.2/24/bondInterf. I tried to execute a bandwidth test and I reach only 93Mb (with only one interfac...
by ilnicchio
Mon Jan 26, 2009 1:45 am
Forum: General
Topic: very strange network problem
Replies: 9
Views: 1418

Re: very strange network problem

I don't know if the problem is the same but... when I connect a linksys PAP2 Voip (SIP) adapter behind a mk router, connected to internet with PPPoE, I cannot get access from outside... This is what append: I try to connect to PAP2 from connection public IP (i make a dst-nat with tcp port 80) and I ...
by ilnicchio
Sun Jan 25, 2009 4:49 am
Forum: General
Topic: How to limit bandwidth usage per TCP connection?
Replies: 3
Views: 1693

Re: How to limit bandwidth usage per TCP connection?

why you doesn't use mikrotik as NAT device instead of dlink?
Using mikrotik you can set up a simple queue with pcq type. With this kind of que you can set a maximum rate and you can equally share bandwidth.
by ilnicchio
Wed Jan 21, 2009 1:13 pm
Forum: General
Topic: Odd router lockup, error=No buffer space available
Replies: 13
Views: 6523

Re: Odd router lockup, error=No buffer space available

I have the same problem with RB600 3.19 and related bios.
OSPF Seems to work but I receive this strange message!
Thanks for your help...
by ilnicchio
Mon Sep 01, 2008 11:31 am
Forum: The Dude
Topic: New Dude version released: v3.0rc1
Replies: 25
Views: 7596

Re: New Dude version released: v3.0rc1

WHY?
by ilnicchio
Fri May 30, 2008 10:33 am
Forum: RouterBOARD hardware
Topic: Rb600 reboot fix
Replies: 47
Views: 19005

Re: Rb600 reboot fix

I Have reboot whit rb600 also with 3.10 and 2.15 firmware upgrade! HELP ME! I use 4 R52 Card. It reboot every 5-40min with a result of 20% of packet loss if I continuos ping it from external When I connect to terminal I see these message: (20 messages not shown) jan/01/1970 00:00:06 system,error,cri...
by ilnicchio
Sun Apr 13, 2008 9:10 pm
Forum: Wireless Networking
Topic: Paket Loss rb532 and OS3.6
Replies: 3
Views: 1177

Re: Paket Loss rb532 and OS3.6

My rb continue losing packet also with 3.7...
It loss packet only on ethernet interface..
I'm going crazy!
by ilnicchio
Fri Apr 04, 2008 5:39 pm
Forum: Wireless Networking
Topic: Paket Loss rb532 and OS3.6
Replies: 3
Views: 1177

Re: Paket Loss rb532 and OS3.6

I experiment the same problem with rb333 and 532Ar5...
I've a sequence of packet loss every 30-40 ping. more in high traffic load.

I use rb 333 only with 2 ethernet port. I use /ip firewall mangle and /ip firewall nat and I lose packet in sequence...

ros v. is 3.2
by ilnicchio
Tue Apr 01, 2008 11:59 am
Forum: RouterBOARD hardware
Topic: RB532A ROS 3.4-3.6-wireless crash when I change something...
Replies: 1
Views: 1016

RB532A ROS 3.4-3.6-wireless crash when I change something...

Hi, when I work on my wireless interface on rb532A wireless crash and I need to access it with ethernet port (not always possible). This append on all my RB532A upgraded to ROS 3.6. An example is: if I change freq, system crash...
I see this problem only in 3.x version
by ilnicchio
Tue Oct 02, 2007 12:40 am
Forum: General
Topic: how to view ospf route cost
Replies: 4
Views: 1002

Re: how to view ospf route cost

I don't remember where I saw this but I remember that the default route cost for a OSPF entry is 110. I think that in older version than mine (I've 2.9.46) is possible to see the route cost directly from ip-> route (and also the internal ospf route cost). I will be happy if version 3 will restore th...
by ilnicchio
Tue Oct 02, 2007 12:25 am
Forum: Wireless Networking
Topic: RB 112 + RB 532B claiming licence has expired
Replies: 3
Views: 869

Re: RB 112 + RB 532B claiming licence has expired

I'd a similar problem and I solve this issue in this setps: 1- create an account on mikrotik 2- login in my account 3- click on request key and put you software-ID (get from system->License) 4- select you license-key and copy it. 5- click on winbox->system->license and click on "paste key" With this...
by ilnicchio
Fri Sep 28, 2007 9:50 pm
Forum: Wireless Networking
Topic: PPPoE client disconnection and reconnection at group...
Replies: 4
Views: 1306

Re: PPPoE client disconnection and reconnection at group...

it is 41!!!
can you please explain me how can i increase this value?
could a filter help to solve the problem?

THANK YOU
by ilnicchio
Fri Sep 28, 2007 11:14 am
Forum: Wireless Networking
Topic: PPPoE client disconnection and reconnection at group...
Replies: 4
Views: 1306

PPPoE client disconnection and reconnection at group...

I have a MT installation with a rb532a, 1 cm9 and 1 sr5. cm9 make the backhaul, sr5 make distribution. On sr5 I have 1 splitter 4 way and 4 sectorial 17db antenna connected. After the upgrade of mikrotik to 2.9.46 (I don't know if is a coincidence) I see tha my customers radio PPPoE client (some OSB...
by ilnicchio
Fri Sep 28, 2007 10:08 am
Forum: Wireless Networking
Topic: Wireless disconnection messages explained!
Replies: 85
Views: 94775

Re: Wireless disconnection messages explained!

Hi,
I see a message not listed in your page:
"removed dynamic WDS link <DEV>, name"
but don't know the reason of removal.

So many thanks for your very usefull page! :)
by ilnicchio
Mon Sep 24, 2007 11:00 pm
Forum: Wireless Networking
Topic: WDS and 3*Sectors
Replies: 6
Views: 1250

Re: WDS and 3*Sectors

I think that support for 3 mPCI is garanted only for "low" power card like "cm9". I think with 3 600mw card the rb532 is overloaded... In my network I have only a routerb board with maximum 3 X cm9 + 1 X SR5...
by ilnicchio
Sat Sep 22, 2007 9:00 pm
Forum: RouterBOARD hardware
Topic: How can install mikrotik with serial cable COM1
Replies: 1
Views: 1112

Re: How can install mikrotik with serial cable COM1

I think that the only good way is netinstall...
you can connect a serial cable to rb only to set the boot option on "network" and after use netinstall.

Francesco
by ilnicchio
Thu Sep 20, 2007 11:24 pm
Forum: General
Topic: RB532A as router
Replies: 4
Views: 1224

Re: RB532A as router

your gateway is your ether1 ip address?
by ilnicchio
Thu Sep 20, 2007 11:22 pm
Forum: RouterBOARD hardware
Topic: License problem after rb 133c reset and reflash
Replies: 1
Views: 1334

License problem after rb 133c reset and reflash

I've a routerboard 133c and I see from winbox the mac address of my board only for 1 second and after nothing. I connect a serial cable to the routerboard and i see... starting services... stoping services... then I reset with jumper my rb but no result... now i reflash this rb 133c and the system n...
by ilnicchio
Thu Sep 20, 2007 12:15 am
Forum: General
Topic: packet los and very high ping times without connection track
Replies: 2
Views: 800

Re: packet los and very high ping times without connection track

I've a very similar problem on a rb532a where I have a large number of packet loss without the 100% of CPU...I have also the Nstream dual activated and connection tracking (disabling it I have some problem with mikrotik dns-caching).
by ilnicchio
Fri Sep 14, 2007 2:50 am
Forum: Wireless Networking
Topic: Maximizing throughput help
Replies: 10
Views: 1799

Re: Maximizing throughput help

What's your throughput? Can you use in your country other frequency with a better difference? (like 5500-5700) I think that you can decrease the interference...
You can also overclock your RB532 up to 333 or 400 mhz if supported (find howto in this forum)
by ilnicchio
Mon Aug 27, 2007 11:32 am
Forum: RouterBOARD hardware
Topic: Cannot Upgrade or downgrade with webinterface
Replies: 1
Views: 1036

Cannot Upgrade or downgrade with webinterface

I cannot upgrade or downgrade my RB532A. I upgrade to 3.0rc2 via ftp from another routerboard because I can't upgrade from single package prom web interface. I see that the file with web interface was uploaded to the rb but when the rb reboot..ther isn't any upgrade..(or downgrade) With the 3.0rc2 I...
by ilnicchio
Sun Dec 10, 2006 8:19 pm
Forum: General
Topic: OSPF and Public IPs
Replies: 2
Views: 1048

ok, it was an error of configuration from the isp... thank you
by ilnicchio
Wed Dec 06, 2006 6:26 pm
Forum: General
Topic: OSPF and Public IPs
Replies: 2
Views: 1048

OSPF and Public IPs

hi all, have a little question about my network... It counts 10 Rb532A routed with OSPF, have a LinkSYS DSL router as a gateway to Internet and I'm masquerading all outgoing traffic. Each MT has a AP with PPPoE server, each client connects with a private address. Now they have given me fiber interne...
by ilnicchio
Mon May 29, 2006 6:49 pm
Forum: General
Topic: Hardware for MT in a BGP scenario
Replies: 11
Views: 2572

- 1 BGP router for first peer - 1 BGP router for second peer

We run only 1BGP for both peers and one router hot standby with scripts ready to go when we want it to be master.
So you are not using VRRP, only dedicated scripts for the backup router, is it right? Are you using watchdog for this?
by ilnicchio
Mon May 29, 2006 6:26 pm
Forum: General
Topic: Hardware for MT in a BGP scenario
Replies: 11
Views: 2572

So: -no support for raid -no support for multi threading -no support more than 1GB memory -no 64bit -VRRP not working at its best with BGP(?) is it right? The only way to have a very high available routing system is: - 1 BGP router for first peer - 1 BGP router for second peer - 1 router for load ba...
by ilnicchio
Mon May 29, 2006 5:49 pm
Forum: General
Topic: Hardware for MT in a BGP scenario
Replies: 11
Views: 2572

I use drives because they are not as hard to find OR replace.
Why doesn't MT sell Flash IDE without MT licence?
I could use 'em in RAID1, or not?
by ilnicchio
Mon May 29, 2006 4:19 pm
Forum: General
Topic: Hardware for MT in a BGP scenario
Replies: 11
Views: 2572

??? Rephrase your question please. If I use a 128 MB IDE Flash module with xxx licence, do I need a hard drive on the pc? The purpose of the project is a high available BGP router with load balancing... can I do this with 1 router or do I need more? For high availability is it better to use VRRP or...
by ilnicchio
Mon May 29, 2006 1:59 pm
Forum: General
Topic: Hardware for MT in a BGP scenario
Replies: 11
Views: 2572

USe std IDE drive (no sata)
What is the need of a drive?
by ilnicchio
Mon May 29, 2006 12:58 am
Forum: General
Topic: Hardware for MT in a BGP scenario
Replies: 11
Views: 2572

Hardware for MT in a BGP scenario

Hi all,

i'm new to MT, tried to read some discussions but no solution found.

I have 2*100mbit peers to different ISPs and want to use MT as a border router. Is MT good for that purpose? What kind of hardware (Cpu and memory) is recommended?

Thank you all