On a CCR1036, sending an high amount of UDP packets (using iperf with its default options) will lead to an important CPU usage with almost 100% of packet loss while receiving the same amount of packets wont be problematic (only one core that sometimes hit 100% and verry rare packet loss) even with m...

Two days ago i tried the RC14 i found on the forum on my CCR, one of the CPU got stuck ~100% after few seconds while getting a BGP full routing table so i couldnt do a /routing bgp * print which would never end up (but it could be cancelled with control+c). Back to RC13 and everything is working fine.

On the 20/mar/2013 build of the v6rc12, on a CCR, i cant add IP adresses from the WebGUI to a bonding interface while its possible on both Winbox and the CLI. The bonding interface is not even shown on the dropdown menu to select the interface for the IP. [admin@ccr1] > /ip address print where inter...

I think i might also be hitting this bug on a CCR, just after booting, i can only do an ARP ping on the router IP but i cant do ICMP ping and connect to TCP but sometimes after unplugging and replugging the cable (cat 6 SFTP non crossed cable) it comes back to life but not always... (but a bridge is...

Adding this bridge filter rule (using action=return) and doing a nmap on 192.168.2.225 leads to a kernel crash of the CCR which reboots instantaneously (the computer doing the nmap is on ether1 and the destination is on ether2) : chain=forward action=return mac-protocol=ip src-address=192.168.0.0/16...