Community discussions

MUM Europe 2020

Search found 9 matches

by svetozar
Thu Dec 11, 2014 4:43 pm
Forum: Beginner Basics
Topic: iperf between two wan... need help
Replies: 4
Views: 973

Re: iperf between two wan... need help

i've doubt is it possible at all? no matter what i've done result is the same Rx/Tx rate spin only on lan interface (it's hairpin) /ip fi ma add action=mark-connection chain=input disabled=no in-interface=wan_if new-connection-mark=wan-con-mark passthrough=yes add action=mark-routing chain=output co...
by svetozar
Thu Dec 11, 2014 2:56 pm
Forum: Beginner Basics
Topic: iperf between two wan... need help
Replies: 4
Views: 973

Re: iperf between two wan... need help

sorry, you mean hairpin, but this case isn't it, here is little picture

i need red flow, to test exchange between wan, NOT green to test switch capabilities
by svetozar
Thu Dec 11, 2014 2:10 pm
Forum: General
Topic: Winbox 3 beta
Replies: 243
Views: 121383

Re: Winbox 3

Yes, it is normal behaviour. You must use the network address not node IP address. Take for example, the node IP address 192.168.1.10/30. The network address is 192.168.1.8, broadcast address is 192.168.1.11 while the two nodes IP addresses are 192.168.1.9 and 192.168.1.10. In order to represent th...
by svetozar
Thu Dec 11, 2014 12:50 pm
Forum: Beginner Basics
Topic: iperf between two wan... need help
Replies: 4
Views: 973

iperf between two wan... need help

I'm trying to do bandwidth test between my two WAN interfaces on one Mikrotik, which has static ips. Splitted two PCs based on mangle route marking for specific ports (80, 443 and 5001/UDP). One PC shows IP_WAN1, the other PC shows IP_WAN2 (tested in 2ip.ru). Here starts my problems. I've started ip...
by svetozar
Thu Dec 11, 2014 10:23 am
Forum: General
Topic: Winbox 3 beta
Replies: 243
Views: 121383

Re: Winbox 3

Can't set CIDR notated network address into src.address field (ip > routes > rules).

192.168.1.0/30 - okay
192.168.1.10/30 - not okay
192.168.1.20/30 - okay
192.168.1.30/30 - not okay
192.168.1.40/30 - okay
192.168.1.50/30 - not okay
192.168.1.56/30 - okay

Is it normal behavior?
by svetozar
Mon Aug 25, 2014 3:51 pm
Forum: General
Topic: mark speeders
Replies: 0
Views: 447

mark speeders

Hi guys, need little help. I have an idea to mark users exceeding the speed into address-list and then limit they speed. For example using max. bandwidth for a 10 minutes at high speed. How? I know about PCQ and LB/FO/FT, but can't catch the answer in my head.
by svetozar
Mon Mar 17, 2014 8:41 am
Forum: General
Topic: L2TP/IPSec for Road Warrior
Replies: 93
Views: 35930

Re: L2TP/IPSec for Road Warrior

One more thing I just remembered Mikrotik have enabled IPSEC XAUTH support.. This is on my try list :) See here: http://wiki.mikrotik.com/wiki/Manual:IP/IPsec#Road_Warrior_setup_with_Mode_Conf Also no mention of Droid or IOS support.. For Windows you have Shrew VPN Client.. ON PPTP VPN Passthrough ...
by svetozar
Mon Mar 17, 2014 8:29 am
Forum: General
Topic: IPSEC NAT limitation
Replies: 6
Views: 1543

IPSEC NAT limitation

Hello community. Today i've setup L2TP IPSEC tunnel and reached limitation described in IPSEC wiki: Only one L2TP/IpSec connection can be established through the NAT. Which means that only one client can connect to the sever located behind the same router. I know WHY this happens, my question is HOW...
by svetozar
Tue Mar 12, 2013 8:05 am
Forum: Virtualization
Topic: Tor Metarouter
Replies: 9
Views: 13615

Re: Tor Metarouter

if you read wiki article more carefully you have noticed the link to hotspot login scripts gives you proper web-address http://webasdf.dyndns.org/tor/hotspotLoginFiles.tar.gz and image links is http://www.webasdf.com/tor/openwrt-22250-tor-image.tar.gz just combine it http://webasdf.dyndns.org/tor/op...