Community discussions

MikroTik App

Search found 32 matches

by roswitina
Wed Sep 09, 2020 9:23 pm
Forum: RouterOS v7 BETA
Topic: Wireguard not working behind internet facing router with DSTNAT v7.1beta2
Replies: 57
Views: 6166

Re: Wireguard not working when behind internet facing router with DSTNAT

Have you tried to access Wireguard on device A via port 8080 and set up DSTNAT to device B to the Wireguard port. Some ISPs block various ports. If port 8080 (TCP) works, it should also work on WG.
by roswitina
Tue Sep 08, 2020 7:29 pm
Forum: RouterOS v7 BETA
Topic: Wireguard not working behind internet facing router with DSTNAT v7.1beta2
Replies: 57
Views: 6166

Re: Wireguard not working when behind internet facing router with DSTNAT

Could it be that the LTE stick has a NAT address? CGNAT.
by roswitina
Sun Jun 07, 2020 7:53 pm
Forum: General
Topic: two pppoe connections, question?
Replies: 7
Views: 1362

Re: two pppoe connections, question?

I would need your additional support. As already mentioned, I plan to do the routing with a RB4011iGS+RM. Since I already have three CRS326-24G-2S+ as switches, I plan to use them with ROS as well. Is that ok, or does it work better with SwOS? Basically, I would also be interested to know which pack...
by roswitina
Fri Jun 05, 2020 2:22 pm
Forum: General
Topic: two pppoe connections, question?
Replies: 7
Views: 1362

Re: two pppoe connections, question?

Thanks for the info.
Then I will probably buy a RB4011iGS+RM and use it for routing.
by roswitina
Fri Jun 05, 2020 1:16 pm
Forum: General
Topic: two pppoe connections, question?
Replies: 7
Views: 1362

Re: two pppoe connections, question?

There are two accounts connected to 1 (one) modem which is connected to an optical fibre. At port 1 (CAT45) I get an IP with the access data user/password and at port 2 (CAT 45) I get another IP with different access data user/password. I can use both accesses separately. I simply imagined that it s...
by roswitina
Fri Jun 05, 2020 7:47 am
Forum: General
Topic: two pppoe connections, question?
Replies: 7
Views: 1362

two pppoe connections, question?

I have two pppoe access points on a fiber optic modem. I plan to connect and share these two ports with a CRS326-24G-2S+. What is the best way to proceed? Do I do this with bonding, or should I connect the lines with ppc load balancing. In any case I want to be able to use this at the same time. So ...
by roswitina
Tue Jul 23, 2019 11:15 am
Forum: General
Topic: separate internet access on one mikrotik; isp1 <-> lan1, isp2<-> lan2
Replies: 4
Views: 717

Re: separate internet access on one mikrotik; isp1 <-> lan1, isp2<-> lan2

That sounds good. i'll try it and share my experience with you.

Question:
Do I have to set up a source NAT rule (masquerade) for each LAN with the respective routing-mark?

thank you
by roswitina
Tue Jul 23, 2019 9:18 am
Forum: General
Topic: separate internet access on one mikrotik; isp1 <-> lan1, isp2<-> lan2
Replies: 4
Views: 717

separate internet access on one mikrotik; isp1 <-> lan1, isp2<-> lan2

I have a Mikrotik rb3011uias with the current firmware 6.46beta9testing. I want to manage up to 4 separate internet accesses on this microtic. ISP1 <-> LAN1; ISP2 <-> LAN2 .... I don't want bundling and load balancing. What is the simplest way to achieve this cleanly and transparently on the rb3011?...
by roswitina
Fri Oct 20, 2017 1:09 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 153787

Re: v6.41rc [release candidate] is released! New bridge implementation!

I use 2011UiAS-2HnD with firmware 3.41. After Urgrade to firmware v6.41rc44 and/or v6.41rc47 the router reboots every one to two hours. in the log I have the following entry: memory system,info router rebooted memory system,error,critical router rebooted beause some critical program crashed I go ba...
by roswitina
Fri Oct 20, 2017 9:43 am
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 153787

Re: v6.41rc [release candidate] is released! New bridge implementation!

I use 2011UiAS-2HnD with firmware 3.41. After Urgrade to firmware v6.41rc44 and/or v6.41rc47 the router reboots every one to two hours. in the log I have the following entry: memory system,info router rebooted memory system,error,critical router rebooted beause some critical program crashed I go bac...
by roswitina
Tue Jul 25, 2017 8:56 am
Forum: General
Topic: [Solved] Several internet connections on a mikrotik
Replies: 9
Views: 1716

Re: [Solved] Several internet connections on a mikrotik

Good idea. There are a lot of people who would like to get your useless routerboard... It is still being used, but it is no longer a firewall. Maybe I try it again or twice ;-) I was just annoyed because I did not manage to set up the router. The additional WAN connection I have needed however. Rosi
by roswitina
Mon Jul 24, 2017 6:24 pm
Forum: General
Topic: mik--lan->ap--->repeater ap----->client( issues)
Replies: 3
Views: 1151

Re: mik--lan->ap--->repeater ap----->client( issues)

Mac address is layer 2. It is, if I understood correctly, only from router to router passed. For me, therefore, your network works. The router should only transmit its MAC address.
Please refer: https://en.wikipedia.org/wiki/OSI_model

Rosi
by roswitina
Mon Jul 24, 2017 6:02 pm
Forum: General
Topic: QOS How to deal with multiple connections?
Replies: 1
Views: 538

Re: QOS How to deal with multiple connections?

Check this page:
https://sonar.software/generate/mikrotik-mangle-queue

Maybe she'll help you.

Rosi
by roswitina
Sun Jul 23, 2017 6:15 pm
Forum: General
Topic: [Solved] Several internet connections on a mikrotik
Replies: 9
Views: 1716

Re: [Solved] Several internet connections on a mikrotik

Solved. I bought another router. Not Mikrotik........

Rosi
by roswitina
Fri Jul 21, 2017 3:25 pm
Forum: General
Topic: [Solved] Several internet connections on a mikrotik
Replies: 9
Views: 1716

Re: Several internet connections on a mikrotik

Excuse me, I will not appear rude.
The fact that I must create Mangle Roules is already clear to me. Only I do not understand exactly which Mangle Roules I need and which I how to create.

I can not do that, unfortunately.
Anyway, thank you. I'll probably have to think of something else.

Rosi
by roswitina
Fri Jul 21, 2017 12:28 pm
Forum: General
Topic: [Solved] Several internet connections on a mikrotik
Replies: 9
Views: 1716

Re: Several internet connections on a mikrotik

I can not cope with the instructions. I have the following data: ISP 1: Wan1: x.x.x.43 / 29 Gateway: x.x.x.41 / 29 Lan: 192.168.20.1 with network (192.168.20.0/24 (default network)) ISP 2: Wan2: x.x.x.30 / 29 Gateway: x.x.x.25 / 29 Lan: 192.168.30.1 with network (192.168.30.0/24) Portforwarding to 1...
by roswitina
Thu Jul 20, 2017 12:25 pm
Forum: General
Topic: [Solved] Several internet connections on a mikrotik
Replies: 9
Views: 1716

[Solved] Several internet connections on a mikrotik

I want to set up a mikrotik rb2011l several internet connections. Each Internet connection is to connect a LAN to the Internet. I do not want loadbalancing etc. Example: Eth0 (wan1) 1.2.3.4/29 - eth5 (lan1) 192.168.20.0/24 Eth1 (wan2) 1.2.3.5/30 - eth6 (lan2) 192.168.30.0/24 And so on ...... I alrea...
by roswitina
Wed Jul 19, 2017 6:38 pm
Forum: Wireless Networking
Topic: CAPsMAN tx and rx chains
Replies: 4
Views: 2321

Re: CAPsMAN tx and rx chains

^^pump
by roswitina
Mon Jul 17, 2017 6:50 pm
Forum: Scripting
Topic: [resolved] Script Failure since 6.40RC38
Replies: 2
Views: 752

Re: Script Failure since 6.40RC38

Script runs again. Thank you.
Rosi
by roswitina
Mon Jul 17, 2017 5:15 pm
Forum: Scripting
Topic: [resolved] Script Failure since 6.40RC38
Replies: 2
Views: 752

[resolved] Script Failure since 6.40RC38

I use the following script for backup: # automated backup 2 External ftp # from: http://harry.subnetworx.de/2013/12/27/automated-routeros-backup-ftp/ # ftp configuration :local ftphost "x.x.x.x" :local ftpuser "xxxx" :local ftppassword "****" :local ftppath "path&q...
by roswitina
Sun Dec 25, 2016 7:02 pm
Forum: Beginner Basics
Topic: [Solved] CAPSMAN2 - failure message
Replies: 0
Views: 464

[Solved] CAPSMAN2 - failure message

I am using a rb2011uias-2hnd with the firmware 6.38rc52 I have installed capsman2 and a working configuration to manage the wlan. If I initialize Capsman2 again, the certifications I delete before, I can register the wlan1 problem-free at capsman2. It also works everything. This messages is in log: ...
by roswitina
Mon Dec 05, 2016 5:40 pm
Forum: RouterBOARD hardware
Topic: RB433ah problem booting :( :(
Replies: 10
Views: 2894

Re: RB433ah problem booting :( :(

I had the same problem with my Mikrotik https://routerboard.com/RB2011UiAS-2HnD-IN I finally did it with the following steps: 1. I have used the program Tera Term Web 3.1 http://wiki.meconet.de/doku.php/mikrotik/rb/routerboot_seriell_updaten 2. I have used another notebook (computer) with Netinstall...
by roswitina
Wed Nov 16, 2016 9:00 am
Forum: Beginner Basics
Topic: Mikrotik Firewall Basics
Replies: 8
Views: 2253

Mikrotik Firewall Basics

Where can I find a good tutorial which explains me firewall rules.

Concretely, I am concerned about the order of the rules. Which rules belong to the beginning and which to the end. Include INPUT, OUTPUT or FORWARD. In other words, they should all be (following) together?

thank you
Rosi
by roswitina
Fri Oct 07, 2016 2:46 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 92041

Re: v6.38rc [release candidate] is released

Can't login with winbox to RouterOS v6.38RC10 x86 (VM in Proxmox). Logon with RouterOS v6.38RC7 x86 works.
Console Login from Proxmox works. Login with Browser (Port 80) works also.

Rosi
by roswitina
Fri Sep 11, 2015 10:00 am
Forum: General
Topic: Feature request: OpenVPN compression LZO and UDP
Replies: 200
Views: 106142

Re: Feature request: OpenVPN compression LZO and UDP

+1 for UDP and compression LZO

Rosi
by roswitina
Wed Aug 19, 2015 10:31 pm
Forum: General
Topic: [resolved] Cant login with Winbox over the internet do a mikrotik router
Replies: 0
Views: 538

[resolved] Cant login with Winbox over the internet do a mikrotik router

I have the model 2011UiAS-2HnD as router. This I have configured with "QuickSet". I can normal surfing and otherwise works in the Internet (mail, etc.). If I want to connect over the Internet to another Mikrotik router with Winbox v3.0RC12, it does not. A ping to the IP address of the Mikr...
by roswitina
Wed Mar 18, 2015 11:27 am
Forum: Scripting
Topic: EXPORT - IMPORT (failure)
Replies: 1
Views: 1785

EXPORT - IMPORT (failure)

I will test the export/import function from mikrotik. RouterOS 6.27. I use the "export compact file=config" command to generate the file config.rsc If I use the "import config.rsc" command the system says "failure: already have device with such name" The file "conf...
by roswitina
Thu Mar 12, 2015 11:01 am
Forum: Beginner Basics
Topic: RB2011L - which port is used
Replies: 11
Views: 2856

Re: RB2011L - which port is used

Thanks.

Rosi
by roswitina
Thu Mar 05, 2015 11:10 pm
Forum: Beginner Basics
Topic: RB2011L - which port is used
Replies: 11
Views: 2856

Re: RB2011L - which port is used

I did not make myself clear enough. Sorry.
If I rename an interface with the Winbox, how can I then its physical location (eth1, eth2, etc.) determine? Where in the Interface List (interface or Ethernet) I can read what physical location has a renamed port?

Rosi
by roswitina
Fri Feb 27, 2015 9:24 am
Forum: Beginner Basics
Topic: RB2011L - which port is used
Replies: 11
Views: 2856

RB2011L - which port is used

How can I determine the individual ports on RB2011L? I want to e.g. see on Switch1 the individual ports on their order. From left to right Switch1: port1, port2 to Port5 and Switch2: port1, port2 to Port 5. I just want to know their physicalische location so I can patch properly actually.

Rosi
by roswitina
Mon Mar 24, 2014 12:15 pm
Forum: General
Topic: Multipath TCP RFC 6824
Replies: 0
Views: 881

Multipath TCP RFC 6824

works Multipath TCP RFC 6824 in mikrotik? ->> http://tools.ietf.org/html/rfc6824 (http://en.wikipedia.org/wiki/Multipath_TCP)

Rosi
by roswitina
Wed Mar 13, 2013 8:14 am
Forum: Beginner Basics
Topic: UPC Business with multiple public ip
Replies: 0
Views: 965

UPC Business with multiple public ip

hello from austria! i use a internet connection from upc (http://business.upc.at/produkte/internet/fiber-power-internet) 100/10 MBit. This connection includes 8 public ip addresses over a public ip via dhcp (router with multi-nat). I suppose, that I do it also with a router board RB2011L RM. I'm new...