MikroTik

roswitina

OK, let's close the whole thing.

I didn't want to let anyone do my work on the configuration, but maybe a nudge in the right direction.

Until now, I was of the opinion that you can also ask questions in a forum. Even if they may seem simple or stupid for some (or many??).

roswitina

That if I knew, I would already be further. I have tried very many different configurations, but none have worked. I have unfortunately not found any information that helped me with the assignment of the data from the client.conf to the inputs at Mikrotik or with which I could do something. I will p...

roswitina

I would like to set up a wireguard connection on my RB2011. The router should connect as a client to a Linux wireguard server and send (route) certain clients or URLs over this connection. I have a client.conf, but I can't manage to create a working configuration and connect with it. [Interface] Pri...

roswitina

Thank you for the information. I can configure the /29 network directly on the mikrotik. It is provided as a subnet. All IP addresses and LANs are used by me alone. I plan to test a little with it and expand my knowledge a little. I plan to do a test with VRF. But I am not sure if I can realize my i...

roswitina

I have been assigned a /29 network by my ISP. So I have 6 public IPs to tap via a router. I want to use at least 3 of these IP addresses to make services reachable from the Internet. Is it practical to run e.g. 3 IP addresses (WAN) separately via a Mikrotik router to separate LANs (3 WAN <--> 3 LAN)...

roswitina

I have two RB4011iGS+ that each establish a PPPOE connection to the same provider and get a fixed IP. Is it possible with RouterOS v7 to make these two connections redundant. So in case of a failure of one device (or reboot) the connection of the PPPOE client should not be interrupted, because on bo...

roswitina

I use RB4011 with ROS 6.49.1. I cant upgrade to ROS 7rc7. In the Log i found:.. Not enough disc space.
The Upgrade from 6.49.1 to 7beta5 to 7rc7 works.

roswitina

With the help of the support team, I found out that the connection error was not caused by the Mikrotik devices. It is almost certainly a problem with a fibre optic cable. This is probably what caused the timeouts. I am having massive problems connecting two Mikrotik switches, both flashed with the...

roswitina

Untagged on both sides.

roswitina

CableModem == CRS326 (VLAN620) <--> CRS326 (VCLAN620)<--> CRS317 (Vlan620) <--> CRS309 (VLAN620) <--> CRS326 (VLAN620) == PPPOe on MT RB2011 (ether5) I use SWOS 2.13 I am trying to establish a pppoe connection via several MT VLAN - connections (VLAN620). This does not succeed. If I run the same conn...

roswitina

Have you tried to access Wireguard on device A via port 8080 and set up DSTNAT to device B to the Wireguard port. Some ISPs block various ports. If port 8080 (TCP) works, it should also work on WG.

roswitina

Could it be that the LTE stick has a NAT address? CGNAT.

roswitina

I would need your additional support. As already mentioned, I plan to do the routing with a RB4011iGS+RM. Since I already have three CRS326-24G-2S+ as switches, I plan to use them with ROS as well. Is that ok, or does it work better with SwOS? Basically, I would also be interested to know which pack...

roswitina

Thanks for the info.
Then I will probably buy a RB4011iGS+RM and use it for routing.

roswitina

There are two accounts connected to 1 (one) modem which is connected to an optical fibre. At port 1 (CAT45) I get an IP with the access data user/password and at port 2 (CAT 45) I get another IP with different access data user/password. I can use both accesses separately. I simply imagined that it s...

roswitina

I have two pppoe access points on a fiber optic modem. I plan to connect and share these two ports with a CRS326-24G-2S+. What is the best way to proceed? Do I do this with bonding, or should I connect the lines with ppc load balancing. In any case I want to be able to use this at the same time. So ...

roswitina

That sounds good. i'll try it and share my experience with you.

Question:
Do I have to set up a source NAT rule (masquerade) for each LAN with the respective routing-mark?

thank you

roswitina

I have a Mikrotik rb3011uias with the current firmware 6.46beta9testing. I want to manage up to 4 separate internet accesses on this microtic. ISP1 <-> LAN1; ISP2 <-> LAN2 .... I don't want bundling and load balancing. What is the simplest way to achieve this cleanly and transparently on the rb3011?...

roswitina

I use 2011UiAS-2HnD with firmware 3.41. After Urgrade to firmware v6.41rc44 and/or v6.41rc47 the router reboots every one to two hours. in the log I have the following entry: memory system,info router rebooted memory system,error,critical router rebooted beause some critical program crashed I go ba...

roswitina

I use 2011UiAS-2HnD with firmware 3.41. After Urgrade to firmware v6.41rc44 and/or v6.41rc47 the router reboots every one to two hours. in the log I have the following entry: memory system,info router rebooted memory system,error,critical router rebooted beause some critical program crashed I go bac...

roswitina

Good idea. There are a lot of people who would like to get your useless routerboard... It is still being used, but it is no longer a firewall. Maybe I try it again or twice ;-) I was just annoyed because I did not manage to set up the router. The additional WAN connection I have needed however. Rosi

roswitina

Mac address is layer 2. It is, if I understood correctly, only from router to router passed. For me, therefore, your network works. The router should only transmit its MAC address.
Please refer: https://en.wikipedia.org/wiki/OSI_model

Rosi

roswitina

Check this page:
https://sonar.software/generate/mikrotik-mangle-queue

Maybe she'll help you.

Rosi

roswitina

Solved. I bought another router. Not Mikrotik........

Rosi

roswitina

Excuse me, I will not appear rude.
The fact that I must create Mangle Roules is already clear to me. Only I do not understand exactly which Mangle Roules I need and which I how to create.

I can not do that, unfortunately.
Anyway, thank you. I'll probably have to think of something else.

Rosi

roswitina

I can not cope with the instructions. I have the following data: ISP 1: Wan1: x.x.x.43 / 29 Gateway: x.x.x.41 / 29 Lan: 192.168.20.1 with network (192.168.20.0/24 (default network)) ISP 2: Wan2: x.x.x.30 / 29 Gateway: x.x.x.25 / 29 Lan: 192.168.30.1 with network (192.168.30.0/24) Portforwarding to 1...

roswitina

I want to set up a mikrotik rb2011l several internet connections. Each Internet connection is to connect a LAN to the Internet. I do not want loadbalancing etc. Example: Eth0 (wan1) 1.2.3.4/29 - eth5 (lan1) 192.168.20.0/24 Eth1 (wan2) 1.2.3.5/30 - eth6 (lan2) 192.168.30.0/24 And so on ...... I alrea...

roswitina

^^pump

roswitina

Script runs again. Thank you.
Rosi

roswitina

I use the following script for backup: # automated backup 2 External ftp # from: http://harry.subnetworx.de/2013/12/27/automated-routeros-backup-ftp/ # ftp configuration :local ftphost "x.x.x.x" :local ftpuser "xxxx" :local ftppassword "****" :local ftppath "path&q...

roswitina

I am using a rb2011uias-2hnd with the firmware 6.38rc52 I have installed capsman2 and a working configuration to manage the wlan. If I initialize Capsman2 again, the certifications I delete before, I can register the wlan1 problem-free at capsman2. It also works everything. This messages is in log: ...

roswitina

I had the same problem with my Mikrotik https://routerboard.com/RB2011UiAS-2HnD-IN I finally did it with the following steps: 1. I have used the program Tera Term Web 3.1 http://wiki.meconet.de/doku.php/mikrotik/rb/routerboot_seriell_updaten 2. I have used another notebook (computer) with Netinstall...

roswitina

Where can I find a good tutorial which explains me firewall rules.

Concretely, I am concerned about the order of the rules. Which rules belong to the beginning and which to the end. Include INPUT, OUTPUT or FORWARD. In other words, they should all be (following) together?

thank you
Rosi

roswitina

Can't login with winbox to RouterOS v6.38RC10 x86 (VM in Proxmox). Logon with RouterOS v6.38RC7 x86 works.
Console Login from Proxmox works. Login with Browser (Port 80) works also.

Rosi

roswitina

+1 for UDP and compression LZO

Rosi

roswitina

I have the model 2011UiAS-2HnD as router. This I have configured with "QuickSet". I can normal surfing and otherwise works in the Internet (mail, etc.). If I want to connect over the Internet to another Mikrotik router with Winbox v3.0RC12, it does not. A ping to the IP address of the Mikr...

roswitina

I will test the export/import function from mikrotik. RouterOS 6.27. I use the "export compact file=config" command to generate the file config.rsc If I use the "import config.rsc" command the system says "failure: already have device with such name" The file "conf...

roswitina

Thanks.

Rosi

roswitina

I did not make myself clear enough. Sorry.
If I rename an interface with the Winbox, how can I then its physical location (eth1, eth2, etc.) determine? Where in the Interface List (interface or Ethernet) I can read what physical location has a renamed port?

Rosi

roswitina

How can I determine the individual ports on RB2011L? I want to e.g. see on Switch1 the individual ports on their order. From left to right Switch1: port1, port2 to Port5 and Switch2: port1, port2 to Port 5. I just want to know their physicalische location so I can patch properly actually.

Rosi

roswitina

works Multipath TCP RFC 6824 in mikrotik? ->> http://tools.ietf.org/html/rfc6824 (http://en.wikipedia.org/wiki/Multipath_TCP)

Rosi

roswitina

hello from austria! i use a internet connection from upc (http://business.upc.at/produkte/internet/fiber-power-internet) 100/10 MBit. This connection includes 8 public ip addresses over a public ip via dhcp (router with multi-nat). I suppose, that I do it also with a router board RB2011L RM. I'm new...

Search found 42 matches