I know that and i already did that before. I have changed all ether6 to sfp1 but it didn't help.
For example if i ping 8.8.8.8 interface=ether6 from CCR it`s working but when i change all ethr6 to sfp1 and do same ping 8.8.8.8 interface=sfp1 i get timeouts.

IP route is not working with sfp interface. be more precise. plateforme, Ros version, etc... On CCR-1036 with 6.2, It is working for me. regards armandfumal thank you for responce. I have CCR1036 with 6.2 and 3.09 firmware. At this moment i`m using ether6 as a main uplink port. But when i change fr...

IP route is not working with sfp interface.

Does any one have any problems with sfp? At this moment i`m using ether6 as uplink (i use media converter from fibre to copper)and it`s working fine, but when i change to SFP1 i lose connection. I use mikrotik S-31DLC20D sfp module and CCR recognize it. Current ROS is 6.2 and firmware version is 3.09.

Does ROS 6.2 support DHCP server option 125? I added this option to my dhcp server but my CPE is not getting it. My hex is below: ip dhcp-server> option print detail 0 name="Genexis eu" code=125 value="0x0000624F10010e733d36322e38342e3138392e3537" raw-value="0000624f10010e73...

Because you want to use vlan124 on a switch you have to assign 10.164.164.2/24 to vlan124 interface on a RB. Then it will work. That`s how i do.

For example: 172.16.0.0/24 - Untagged 172.16.1.0/24 - vlan2 172.16.2.0/24 - vlan3 172.16.3.0/24 - vlan4 interface vlan add vlan-id=2 interface=ether2 interface vlan add vlan-id=3 interface=ether2 interface vlan add vlan-id=4 interface=ether2 Untagged ip address add address=172.16.0.1 netmask=255.255...

Can you show your config?