Community discussions

Search found 42 matches

by skibi82
Tue Feb 06, 2018 11:34 am
Forum: SwOS
Topic: Request to add ssl to http port
Replies: 2
Views: 486

Re: Request to add ssl to http port

Dear normis i am talking about SWOS.
Home > Forum index > Other topics > SwOS

In addition, it would be useful to be able to determine the max number of macaddresses on the port.
by skibi82
Tue Feb 06, 2018 11:03 am
Forum: SwOS
Topic: Request to add ssl to http port
Replies: 2
Views: 486

Request to add ssl to http port

Addition of the https protocol to the possibility of logging in.
An unsecure way to log in is required for each network audit
by skibi82
Wed Dec 23, 2015 10:13 pm
Forum: General
Topic: v6.33.3 [current] is released!
Replies: 59
Views: 18663

Re: v6.33.3 [current] is released!

The problem lies with the disabled queues in the chain if redirect traffic to such a chain of 6.33.3 Russian crashes Re: [Ticket#2015122266000642] Fatal error of the firmware> 6.33.3 Test rule /ip firewall filter add action=jump chain=KBOOM disabled=yes jump-target=\ BUBAMIKROTIK add action=jump cha...
by skibi82
Wed May 20, 2015 4:11 pm
Forum: General
Topic: v6.29 will be released this week!
Replies: 65
Views: 13289

Re: v6.29 will be released this week!

When the problem is solved by mikrotik support?
Ticket#2015042166000534
by skibi82
Mon May 11, 2015 8:37 pm
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 61620

Re: RouterOS v6.28 released

In Mail from 2015-04-21 15:57:23.04.2015 - Ticket#2015042166000534 was picture incluted:
wtf.png
YES is in tunnel mode
@skibi82: ipsec is in transport mode or tunnel mode?
by skibi82
Mon May 11, 2015 4:55 pm
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 61620

Re: RouterOS v6.28 released

1. According to the scheme packet floow, described ipsec traffic on input should be visible on a forward with mark. Everything works fine until 6.27 After the update above 6.28 there is now the possibility to describe traffic that it's ipsec with the ipsec A change in the documentation does not make...
by skibi82
Sun May 10, 2015 11:39 am
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 61620

Re: RouterOS v6.28 released

When the gentlemen of mikrotik deign to reply: Ticket#2015042166000534 Data: 2015-04-21 16:08 Post 2015-04-21 15:57 Critical bug in 6.28 After updating to version 6.28 is the problem of detection ipsec esp. Before that could properly be described in Mangle encrypted traffic Packet Markt: IPSEC and t...
by skibi82
Tue Apr 21, 2015 5:05 pm
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 61620

Re: RouterOS v6.28 released

Critical bug in 6.28 After updating to version 6.28 is the problem of detection ipsec esp. Before that could properly be described in Mangle encrypted traffic Packet Markt: IPSEC and then on filter rule i culd filter IP inside the ipsec tunnel Since version 6.28 does not have the capability of this....
by skibi82
Mon Feb 16, 2015 1:01 pm
Forum: Announcements
Topic: RouterOS v6.27 released
Replies: 273
Views: 99651

Re: RouterOS v6.27 released

And again, the same can not be imported and name of the certificate.
As I will now want it to be 100 certificates then i have totally fuck
Fairy where I have a certificate?

Maybe cert_42 can cert_23 wtf?
I have all displayed in the CLI and then look for

Great Improvement
dupa.png
by skibi82
Mon Dec 29, 2014 8:15 pm
Forum: Announcements
Topic: 6.24 released
Replies: 91
Views: 34696

Re: 6.24 released

After updating to 6.24 lost Hlink LTE interface. Please, quick repair error. This is not normal that after every update you must be wondering what mikrotik support screw up in firmware. The same as described in [Ticket#2014122966000702] RE: To put it mildly WTF [...] At the moment, 20 branches work ...
by skibi82
Tue Aug 26, 2014 12:19 pm
Forum: General
Topic: Feature requests
Replies: 1159
Views: 204208

Re: Feature requests

Give MACVLAN to add the power to create Virtual interfaces.
Useful for testing or the separation of traffic.
by skibi82
Tue Aug 19, 2014 10:03 pm
Forum: General
Topic: v6.19rc for CCR tests needed!
Replies: 59
Views: 17516

Re: v6.19rc for CCR tests needed!

Loop detection based on: Sends the packet to the port, if the packet return then porst is shutdown for forward Another method to detect loop is to observe Broadcast suddenly jump if their number and will be at some level is likely to have loops on a given port Loop detection is super function when t...
by skibi82
Thu Jul 24, 2014 8:41 pm
Forum: General
Topic: v6.16/v6.17
Replies: 187
Views: 46393

Re: v6.16/v6.17

After switching BaseBox 2 to silent mode in routerboard on the latest firmware and ROS 6.17
Router asleep forever.

If i press reset all LED lights for ever :P

The router is not dead - it is impossible run Netinstall as well as anything else

Good job off support

P. S.
Thank God RMA work.
by skibi82
Wed May 28, 2014 10:16 am
Forum: General
Topic: v6.13 released!
Replies: 177
Views: 48658

Re: v6.13 released!

Request a positive one variable informing about the configuration sequence number.
This variable should be automatically updated eg enum or something similar, gets called reconfiguration. It was applicable to the case of automatic copy.
Very useful for synchronizing devices in the cluster.
by skibi82
Wed May 21, 2014 11:26 pm
Forum: General
Topic: v6.13 released!
Replies: 177
Views: 48658

Re: v6.13 released!

I think 6.13 is as good firmware. 1. Do Not hangs when l2tp/sstp/pptp all versions greater than 6.7 unfortunately had fucked implementations of these tunnels (with 200 tunnels and a large movement of the device had to August reboot using the watchdog) Apart from the odd behavior of a process and a h...
by skibi82
Sat May 17, 2014 7:02 pm
Forum: General
Topic: v6.13 released!
Replies: 177
Views: 48658

Re: v6.13 released!

When there are plans to implement Xstp in CRS switch?
by skibi82
Sat May 17, 2014 7:00 pm
Forum: General
Topic: v6.13 released!
Replies: 177
Views: 48658

Re: v6.13 released!

To fix problem use netinstall I'm new to MT, so maybe it was somethere on the forum... I got and installed ROS 6.12RC20. Now after pressed Download and Upgrade it Download and Reboot. After reboot still 6.13RC20. Download manualy to Files -> Reboot. Still 6.13RC20. How to upgrade to ROS 6.13 final ?...
by skibi82
Sun May 04, 2014 11:41 am
Forum: General
Topic: v6.12 released
Replies: 237
Views: 57045

Re: v6.12 released

Question I need to put on windows 8.1 ROS.
Unfortunately can not see network interfaces with Hyper-V.
Is ROS in general 6.x adapters work with Hyper-V?
by skibi82
Sun Apr 20, 2014 12:36 pm
Forum: General
Topic: v6.12 released
Replies: 237
Views: 57045

Re: v6.12 released

Super LACP has been added ond CRS and when it will be implemented protocol support xSTP [STP / RSTP / MSTP / ....]?

Of course, talking about the hardware switch
by skibi82
Mon Mar 31, 2014 10:47 am
Forum: General
Topic: v6.11 released
Replies: 260
Views: 79537

Re: v6.11 released

Temporary overload stack restarts I submit to Support mikrotik from version 6.9 - for now. Unfortunately, if someone needs a relatively stable versions 6.x, it remains only to downgrade to 6.7 and wait until support finally solve the problem. In 1 may 2 years: P And, as a side or known if at all you...
by skibi82
Fri Mar 21, 2014 2:59 pm
Forum: General
Topic: v6.11 released
Replies: 260
Views: 79537

Re: v6.11 released

Know when you will be added possibility to configure the SRC IP for:
OVPN Client L2TP Client, Client SSTP, PPTP Client

I have another question whether there is a possibility in the future to add posibility to define on ppp connection
parameter to the name of routing table.
by skibi82
Thu Mar 20, 2014 1:31 pm
Forum: General
Topic: v6.10 released
Replies: 248
Views: 82012

Re: v6.10 released

Above version 6.7 I noticed a strange phenomenon. Well, in the case when I have defined DSTNAT redirection inside the network. And leaning forward Addres Lists After some time available services stop working. It helps to reboot mikrotik and everything returns to normal. It seems that this phenomenon...
by skibi82
Sun Mar 09, 2014 4:34 pm
Forum: RouterBOARD hardware
Topic: CRS226
Replies: 33
Views: 10309

Re: CRS226

Request basic smart switch functionality
LACP dynamic
STP
RSTP
MSTP
VOICE VLAN by mask
by skibi82
Fri Mar 07, 2014 3:35 pm
Forum: RouterBOARD hardware
Topic: CRS226
Replies: 33
Views: 10309

Re: CRS226

it works at wire speed in switch mode. As a router, CPU is limit like you observed.
There is no basic functions of a managed switch.
I'm talking here about what any other.

I make the connection port 1 and 2, and then the machine dies.
And what I such that the loop switch can not determine
by skibi82
Fri Mar 07, 2014 3:22 pm
Forum: RouterBOARD hardware
Topic: CRS226
Replies: 33
Views: 10309

Re: CRS226

Atheros CPU, no HW acceleration. But remember, it is still mostly a Switch. Will have xSTP, LACP,VoisVLAN and other solutions? If not, please do not tell anyone that this switch. It will be like CRS125 on network switch is not suitable. In this case we get 10Gbps switch with a capacity of 40 Mbps Ho...
by skibi82
Thu Feb 27, 2014 3:50 pm
Forum: General
Topic: v6.10 released
Replies: 248
Views: 82012

Re: v6.10 released

and according to the diagram instructed to do so: Input interface -> In Interface Bridge ->Prerouting -> Routing Decision -> Input -> Ipsec Policy -> IPSec Dectyption -> Forward f**k and hear he go to forward but the ip is in local IP shud be placed to routing Routing Decision so the flow shuld be ...
by skibi82
Thu Feb 27, 2014 10:35 am
Forum: General
Topic: v6.10 released
Replies: 248
Views: 82012

Re: v6.10 released

Route table is correct and is not the main table. Anyhow it indicates a problem. It is absurd to the implementation of the IPSEC tunnel mode Why in this case served the ends of the tunnel on the left and right quickly and so the package is not addressed properly. By the way, I do not know if I unde...
by skibi82
Mon Feb 24, 2014 8:38 pm
Forum: General
Topic: v6.10 released
Replies: 248
Views: 82012

Re: v6.10 released

Route table is correct and is not the main table. Anyhow it indicates a problem. It is absurd to the implementation of the IPSEC tunnel mode Why in this case served the ends of the tunnel on the left and right quickly and so the package is not addressed properly. By the way, I do not know if I under...
by skibi82
Mon Feb 24, 2014 5:01 pm
Forum: General
Topic: v6.10 released
Replies: 248
Views: 82012

Re: v6.10 released

I noticed a serious error in the implementation of IPSEC The situation as a picture. In gets called when the unit Mikrotik 2 does not default gw It is not properly routed traffic through the ipsec policy. Create two ipsec policy: 1. Prio 9999 trafic from 192.168.1.1 to 192.168.1.0/24 is no encrypted...
by skibi82
Wed Feb 12, 2014 1:17 pm
Forum: General
Topic: RouterOS 6.10 beta
Replies: 35
Views: 11547

Re: RouterOS 6.10 beta

Woof in 6.10 build Feb/12/2014 10:52:34

/ip ipsec peer> set local-address=

The first step in the right direction :)
Now I was left to wait for the rest of the VPN :)

I'll arrange a test thank you

Regards
J>S
by skibi82
Thu Feb 06, 2014 9:38 pm
Forum: General
Topic: 6.9 released!
Replies: 223
Views: 79286

Re: 6.9 released!

I have to admit the pain in my heart that release 6.9 is the biggest disgrace. Where to start: 1. As before predecessors wrote that the SSTP server is not running properly. I need only confirm the continuous reconect and of the initialization phase of the tunnel cpu going to head. 2 ipsec flusch sa ...
by skibi82
Sun Feb 02, 2014 2:23 pm
Forum: General
Topic: 6.9 released!
Replies: 223
Views: 79286

Re: 6.9 released!

Any successful upgrades of the x86. I guess ROS 6.9 has issues understanding the hard disk. I upgrade x86 on them PPPOE server around 80 active PPPOE connection, radius authentication, NAT, OSPF, MPLS, VPLS not very complicated setup so far no problem. Up time: 21 hours for now Software 6.9 for The...
by skibi82
Sun Feb 02, 2014 10:14 am
Forum: General
Topic: 6.9 released!
Replies: 223
Views: 79286

Re: 6.9 released!

Software 6.9 for The quick repair After updating RB951G after some time to get the fuck out The same thing happens with RB450G Hardware reboot is need to start system and downgrade the device At the moment, - 12 x RB751G - 6 x RB2011-L - 20 x RB2011-UAS - 10 x RB1100AHx2 firmware on them do not get ...
by skibi82
Thu Jan 30, 2014 11:52 pm
Forum: General
Topic: routeros 6.9 (release candidate)
Replies: 33
Views: 8834

Re: routeros 6.9

The proposal to improve the VPN possibilities:

http://forum.mikrotik.com/viewtopic.php?f=1&t=81317
by skibi82
Thu Jan 30, 2014 8:05 pm
Forum: General
Topic: The proposal to improve the VPN possibilities.
Replies: 9
Views: 4956

The proposal to improve the VPN possibilities.

My suggestion is to finally add the src ip for: - SSTP Client - PPTP Client - L2TP Client - OVPN Client - IPSEC PHASE 1 After adding the src ip options for VPN clients could finally establish two simultaneous connections to a VPN concentrator. It gave balance to the links And not only used second li...
by skibi82
Tue Jan 28, 2014 8:11 am
Forum: General
Topic: What's new in 6.8rc1
Replies: 106
Views: 22778

Re: What's new in 6.8rc1

Amendment to an earlier post on 6.8rc1 rb 951g router just hangs. In such a way that the internal watchdog nothing was done. There is no communication on any ports is also not on wifi. After the restart does not see normal speeds on the ports need to enable disable the port . # Jan/28/2014 7: 4:25 t...
by skibi82
Sat Jan 25, 2014 9:19 am
Forum: General
Topic: What's new in 6.8rc1
Replies: 106
Views: 22778

Re: What's new in 6.8rc1

After one day of action rb951g hung wifi card.
routeros-mipsbe-6.8rc1 was updated at 2014-01-24 14:30

After restarting the communication device has been restored.
by skibi82
Wed Jan 22, 2014 8:34 pm
Forum: General
Topic: What's new in 6.8rc1
Replies: 106
Views: 22778

Re: What's new in 6.8rc1

You can see that support in recent times does not give advice.
What's new edition of the old mistakes.

Even I do not know it seems that the problem only on RB951G 6.8rc1 on the second router CRS125 all ok
by skibi82
Fri Nov 08, 2013 10:37 pm
Forum: General
Topic: RouterOS v6.6 released
Replies: 164
Views: 72420

Re: RouterOS v6.6 released

CRS125 after updating the E353 modem dangled on one of devices. After upgrade on second device was missing in action E3131 modem . Disconnect the modem from the device. Entry into System-> Resources hmm I see Ghost USB modem on WTF visible. Factory reset. Waiting 1 min. Modem connection. WFT No seri...
by skibi82
Thu Nov 07, 2013 10:14 pm
Forum: General
Topic: MikroTik News October 2013 (Issue #52)
Replies: 27
Views: 11721

Re: MikroTik News October 2013 (Issue #52)

Than all the gold that glitters . CRS125 seemed to be the ideal product , but unfortunately again proved a failure in comparison to buy normal managed switch. reason 1 Why would I need as many ports even when I'm not able to do normal Trk , or LACP on the switch. ( For all those who do not know the ...
by skibi82
Mon Mar 25, 2013 4:48 pm
Forum: General
Topic: Addition Derault route distance for PPP conections.
Replies: 1
Views: 818

Addition Derault route distance for PPP conections.

Useful if more modems
by skibi82
Sat Mar 23, 2013 8:40 am
Forum: General
Topic: Ability to define the boot script
Replies: 3
Views: 1519

Ability to define the boot script

Ading the ability to perform the boot script as it is in linux for example rc.local
Very useful to define one device startup script that starts only once.

Not by adding to the schedule and describe the function globally.