There is more to this than just IPSec issues. The router, running 6.1, was very sluggish in response to commands, as if it was stuck in a loop, the terminal window taking upwards to 30 seconds to get to a command prompt in comparison to the normal 3-5 seconds. I haven't had this or any other proble...

Does anyone here have experience in accessing the WebFig interface of a MikroTik (RouterOS) interface using the .NET 4.5 WebBrowser class (e.g. via Visual Basic 2012)? After getting the login page and sending the username/password details, I get a script error that doesn't occur when using Firefox o...

Problem solved, thanks to the Whirlpool thread I posted in the OP. I was using the Ethernet gateway interface in the rules, instead of the PPPoE client.

Did you mean ip route print? Here's that. [admin@MikroTik] /ip route> print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 ADS 0.0.0.0/0 10.20.21.18 1 1...

I'm not sure where that's specified. In the web configurator, there's a "Routes" entry under "IP", and also a separate "Routing" entry with subheadings, such as BGP.

Rather than copy and paste the information I have posted elsewhere, can anyone here suggest what might be causing the problem I have described in this forum:

http://forums.whirlpool.net.au/forum-re ... ?t=2075671