MikroTik

Mitar

ok, I actually tried it again and correct command is "/file add name=/temp/.type contents=container" this single command does what I wanted, /file print was totally wrong usage, which is funny because old tutorials says that "print" is used to create files https://mikrotik-router...

Mitar

How can I create file named ".type" with contents "container" in it ? When I am trying to run command "/file print file=/temp/.type" the result is always "invalid file name". I need that ".type" file because I am using tmpfs disks with container writ...

Mitar

It works great on Hap AX2, BUT I have noticed that there is a lot of writes to the disk and its due to atlas probe writing constantly temporary data to \var\atlasdata I think it would be best to mount \var\atlasdata as 32 MB tmpfs so that internal flash drive wouldn't die too soon. I have measured t...

Mitar

I was wondering if ever RouterOS will support DNSCrypt or DNS over TLS ?
There were quite a lot of topics in the past but nothing really conclusive.

Mitar

The same is true with the cAP ac, on 5GHz there is noise...

on hAP ac² there was noise coming from it even when only 2.4 GHz was ON.

Mitar

Do not interfere with it, just return it as faulty and describe the reason for useful feedback to all. This is clearly a hardware QA issue, i.e. probably not even an issue with the model at all. Also, why are you considering to interfer with the faulty hardware of a brand new device, especially for...

Mitar

I managed to open the case very carefully and yes that is the coil problem, even applying a little pressure on it with finger and it generally becomes noiseless. This coil is sort of closed in a case but it have small 1mm holes which could be used to insert needle with super glue. Just the question ...

Mitar

I wouldn't worry about it unless you have it in a place where you are regularly close enough to hear it. Well I live in a small flat and router is ~ 2 meters from my bed and half a meter from my desk so its extremely annoying. Its even actually doing those noises on cable only transfers but they ar...

Mitar

I can hear the noise from .flac file although it is not loud. Well maybe it is not VERY loud but I try to keep all my equipment in room I sleep as quiet as possible, and thats the only router so far in my life that is making such noises, and I had 20+ routers including routers from Linksys ( cisco ...

Mitar

Can you translate "hissing" into frequency in kHz? The point is that the younger you are, the higher frequencies you can hear, plus the initial range and the rate of deterioration is of course individual per person. So my own hAP ac² may well behave exactly the same like yours but I may n...

Mitar

well, its not VERY noisy but I can hear it in quiet room few meters away.

Mitar

I have bought today brand new hAP ac² and its amazing when it comes to performance ( except glitchy 5 GHz wifi but hopes it will get fixed ), BUT it tends to get noisy when theres any WiFi transfer going on, its much more noisy on 5 GHz ( same transfer speed as in 2,4 GHz ), the sounds it makes are ...

Mitar

So I have bought hAP ac2 and its amazing, on same settings as my RB951G cpu usage is only 2-3% when fully using 100 Mbit PPPoE, while on RB951G cpu usage was ~20% ( with fastpath, without it was double that ). Did you get 900/100 Mbit WAN connection speed with the hAP ac2, PPPoE and same IP firewal...

Mitar

I have bought today brand new hAP ac² and its amazing when it comes to performance ( except glitchy 5 GHz wifi but hopes it will get fixed ), BUT it tends to get noisy when theres any WiFi transfer going on, its much more noisy on 5 GHz ( same transfer speed as in 2,4 GHz ), the sounds it makes are ...

Mitar

So I have bought hAP ac2 and its amazing, on same settings as my RB951G cpu usage is only 2-3% when fully using 100 Mbit PPPoE, while on RB951G cpu usage was ~20% ( with fastpath, without it was double that ).

Mitar

Well the real question is will hAP AC 2 be able to handle 900/100 Mbit via PPPoE + NAT + around 30 firewall rules via LAN ?

Mitar

Soon I will have internet speed up and I am looking for new router, currently I have RB951G-2HnD but obviously it wont work fine with that much traffic. So the WAN will be 900/100 Mbit using PPPoE and I want that divided thru mikrotik for few PCs and other devices via LAN and Wifi is not very import...

Mitar

eh I was messing so much in firewall that I didn't thought of obvious signs before me , lowered the tunnel MTU and everything works correctly now, I can browse fast any ipv6 website.

Mitar

I decided to setup 6to4 tunnel using Hurricane Electric service. Although I have some wierd problem. My pc in lan network have ipv6 address , I can ping any ipv6 address , DNS works too , but ... other than pings I cant browse any ipv6 website , it just time outs , cant even browse anymore tunnelbro...

Mitar

I have kind of wierd problem with my Mikrotik RB951G-2HnD . I live in a flat on 6th floor with router deep inside the flat , and when I am outside on car parking I can catch my wifi from home without any problems using smartphone. The problem is I don't want my WiFi signal to be THAT strong , best w...

Mitar

I have identical problem with SSTP Server on RouterOS 6.25 , downgrade to 6.24 resolved the problem.

Mitar

Please Test ROS 6.6 , it fixed the upload problem for me , will do some more tests , but speed test sites shows finally full upload

Mitar

still having same problem ...

Mitar

Maybe the CPU load is too high for these large speeds?

no , 60-70 % max

also same problem in RB1200 and better ( this topic ) , just never fixed ROS bug...

Mitar

ROS 6.2 Problem still existing.

Mitar

refresh.
Anything new ?
Wondering when I will be able to fully use my bandwidth ...

Mitar

then I add my interesting observation.
I also had earlier rb2011uas-2hnd-in , when I connected LAN PC to 100 Mbit switch , I had almost full download/upload , maybe was 2-5 Mbit less than max speed .
WAN was connected to GBIT switch.

Mitar

Refresh.

Mitar

Refresh.

Mitar

Do you use change MSS in your PPP profile ?

was trying with and without it

In one of my tries , when I changed from 1 Gbit to 100 Mbit port LAN ( negotiation change ) in Mikrotik I had almost max upload but very low download ><

Mitar

forgot to add , I am using PPPoE too.

Mitar

Refresh , problem still existing in ROS 6.1

Mitar

Refresh.

Mitar

I have identical problem on RB951 and RB2011 , 100 Mbit Download / 50 Mbit Upload and only half upload when using Mikrotik ( 21-22 Mbit ) , when connecting directly without router I have 50-52 Mbit. I was trying everything , different versions of ROS , totally changing all network cables to cat6 shi...

Mitar

I am looking for router that will : 1) Work with 100 Mbit Download / 50 Mbit Upload PPPoE internet connection 2) QoS 3) Work with 3000-4000 connections at same time 4) Work stable as 2.4 Ghz AP 5) Be very stable overall 6) CPU won't hit 80-90 % usage Will RB2011UAS-2HnD-IN be enough or I should set ...

Search found 35 matches

Re: Create .type file using script [SOLVED]

Create .type file using script [SOLVED]

Re: RIPE Atlas Software Probe running on v7.1rc3 [development]

Secure DNS client

Re: hAP ac² noisy when using WiFi [SOLVED]

Re: hAP ac² noisy when using WiFi [SOLVED]

Re: hAP ac² noisy when using WiFi [SOLVED]

Re: hAP ac² noisy when using WiFi [SOLVED]

Re: hAP ac² noisy when using WiFi [SOLVED]

Re: hAP ac² noisy when using WiFi [SOLVED]

Re: hAP ac² noisy when using WiFi

hAP ac² noisy when using WiFi [SOLVED]

Re: Mikrotik for 900/100 Mbit WAN

hAP ac² noisy when using WiFi

Re: Mikrotik for 900/100 Mbit WAN

Re: Mikrotik for 900/100 Mbit WAN

Mikrotik for 900/100 Mbit WAN

Re: Hurricane Electric 6to4 tunnel problem

Hurricane Electric 6to4 tunnel problem

Too strong WiFi signal range

Re: RouterOS v6.25

Re: Slow Upload Speeds on Internet Port

Re: Slow Upload Speeds on Internet Port

Re: Slow Upload Speeds on Internet Port

Re: Slow Upload Speeds on Internet Port

Re: Slow Upload Speeds on Internet Port

Re: Slow Upload Speeds on Internet Port

Re: Slow Upload Speeds on Internet Port

Re: Slow Upload Speeds on Internet Port

Re: Slow Upload Speeds on Internet Port

Re: Slow Upload Speeds on Internet Port

Re: Slow Upload Speeds on Internet Port

Re: Slow Upload Speeds on Internet Port

Re: Slow Upload Speeds on Internet Port

Re: RB2011UAS-2HnD-IN Questions Topic