Community discussions

MUM Europe 2020

Search found 46 matches

by Benik3
Mon Mar 11, 2019 2:01 pm
Forum: General
Topic: Port mirroring - targeted port have no access
Replies: 0
Views: 187

Port mirroring - targeted port have no access

Hello. I have RB941 (HaP Lite) where I use port mirroring a lot for wireshark debugging. But I have problem, that on the tagreted port I'm not able to make any connection. My config: # jan/02/1970 00:50:55 by RouterOS 6.44 # software id = BLZA-7TM9 # # model = RouterBOARD 941-2nD /interface bridge a...
by Benik3
Tue Nov 22, 2016 11:21 pm
Forum: General
Topic: PCQ limit & total limit settings
Replies: 36
Views: 43116

Re: PCQ limit & total limit settings

I don't know exactly the impact of PCQ-limit, but PCQ-total-limit can be set as I mentioned above - limit*numbers of connection to limit.
So with limit 50 and 50 users I would set total-limit to 2500.

Try and watch :)
by Benik3
Wed Sep 21, 2016 1:06 pm
Forum: General
Topic: Add print server (printer support)
Replies: 138
Views: 61724

Re: Add print server (printer support)

I can't even imagine that Cisco will have something like winbox and so nice terminal :)
by Benik3
Sat Sep 17, 2016 7:54 pm
Forum: General
Topic: Add print server (printer support)
Replies: 138
Views: 61724

Re: Add print server (printer support)

Can you ´post some link to the cups and xsane on router? Otherwise it's HOME and OFFICE router wit USB which is now almost useless... Why I should by new printer just for network sharing when I have already some good one at home? And I have home router with USB? On OpenWRT I use now VirtualHere. It'...
by Benik3
Mon Feb 01, 2016 12:05 am
Forum: Announcements
Topic: v6.34 [current] is released!
Replies: 91
Views: 23642

Re: v6.34 [current] is released!

I wasn't here for a long time, but about the Dude, it's being improved?
It's about 2 years back what I tried it...

Thanks :)

EDIT: Well I see now that server is only supported on Tile or x86 Mikrotik :/
by Benik3
Tue May 19, 2015 10:42 pm
Forum: Beginner Basics
Topic: Backup connection with parallel antenna [solved]
Replies: 9
Views: 1249

Re: Backup connection with parallel antenna

Yes. The scheme is like this. Exactly: router A LAN1<--------24GHz wireless-------->LAN1 router B router A LAN2<-------10GHz wireless-------->LAN2 router B The cost on OSPF is good idea! I will test it, thanks! :) EDIT: After setting OSPF interface cost and priority it works as it should. Thanks a l...
by Benik3
Tue May 19, 2015 8:07 pm
Forum: Beginner Basics
Topic: Backup connection with parallel antenna [solved]
Replies: 9
Views: 1249

Re: Backup connection with parallel antenna

As I said, I did it on both routers. Here are screenshots. In the first picture you can see, that the download stream is divided (it's not always 50:50) and routing table. This router is connected to our provider of connectivity (eth1) The second screenshot is from second router (deeper in our netwo...
by Benik3
Tue May 19, 2015 1:14 pm
Forum: Beginner Basics
Topic: Backup connection with parallel antenna [solved]
Replies: 9
Views: 1249

Re: Backup connection with parallel antenna

Thanks!

I just tried it. In one direction it works OK (upload), in the second (download) it still split the connection on both antennas :/
I tried to set the GW on both routers...
by Benik3
Sun May 17, 2015 3:57 pm
Forum: Beginner Basics
Topic: Backup connection with parallel antenna [solved]
Replies: 9
Views: 1249

Re: Backup connection with parallel antenna

Do a search on "load balancing" and failover, you'll find lots of ways to achieve that on this forum. Thanks, I will look. I tried to search something related to "backup connection", but I wasn't very successful... It depends, are the router interfaces connecting to the antennas in a bridge or same...
by Benik3
Sat May 16, 2015 8:45 pm
Forum: Beginner Basics
Topic: Backup connection with parallel antenna [solved]
Replies: 9
Views: 1249

Backup connection with parallel antenna [solved]

Hello. I have two Mikrotiks connected together with two antennas through LAN (24GHz main and 5GHz as backup). Now I would like to make some system of the backup. The only idea which I got was to write script like this: Ping remote router through LAN1 port (with 24GHz antenna). LAN2 port (with 5GHz a...
by Benik3
Sat May 16, 2015 8:29 pm
Forum: Beginner Basics
Topic: Export RB750 -> Import RB850GX2
Replies: 3
Views: 649

Re: Export RB750 -> Import RB850GX2

Use export or export compact and you will see.
If there will be any error, it will say you on which lane of configuration file. Or you can turn on verbose mode while importing to see it step by step :)
Then you can fix it manually...
by Benik3
Fri Mar 27, 2015 12:48 am
Forum: General
Topic: PCQ limit & total limit settings
Replies: 36
Views: 43116

Re: PCQ limit & total limit settings

Try this:
The pcq-limit you can leave 50 and the pcq-total-limit is pcq-limit multiplied by number of connections (so e.g. for /24 it's 12700).
Works fine for me :)
by Benik3
Sat Oct 18, 2014 12:09 am
Forum: General
Topic: Sample Installations - Sticky Please
Replies: 230
Views: 137454

Re: Sample Installations - Sticky Please

Samples...
No shielded cables and connectors into ubnt adapters? These looks like indoor cables...
by Benik3
Tue Sep 30, 2014 6:15 pm
Forum: General
Topic: Add print server (printer support)
Replies: 138
Views: 61724

Re: Add print server (printer support)

I'm for the USB/IP, because RAW TCP doesn't allow to read data from printer (so you don't see remaining ink, no paper message etc. on computer...)
by Benik3
Tue Sep 02, 2014 7:01 pm
Forum: General
Topic: NOT TO DO. Weird instalations?
Replies: 386
Views: 239343

Re: NOT TO DO. Weird instalations?

Problem was, that there wasn't possibility for soldering, otherwise I would do it better way ;)
The holes were covered later :)
by Benik3
Tue Sep 02, 2014 2:11 pm
Forum: General
Topic: NOT TO DO. Weird instalations?
Replies: 386
Views: 239343

Re: NOT TO DO. Weird instalations?

When there is no POE passthrough :D
by Benik3
Wed Aug 27, 2014 7:34 pm
Forum: General
Topic: ROSv6 PCQ queue problem [SOLVED]
Replies: 4
Views: 1363

Re: ROSv6 PCQ queue problem

Thanks, I will test it :)

EDIT: It looks that it works, thank you! 8)
by Benik3
Wed Aug 27, 2014 1:27 pm
Forum: General
Topic: incorrect ping
Replies: 4
Views: 828

Re: incorrect ping

Here it is
Note: Two wirelles are disabled and not used anymore, addresses 10.0.9.0/24 are disabled, 10.0.14.0/24 I just moved to unused ethernet for compatibility (we have it probably somewhere e.g. as DNS server IP, so I don't want to disable it...)
by Benik3
Wed Aug 27, 2014 2:13 am
Forum: General
Topic: incorrect ping
Replies: 4
Views: 828

Re: incorrect ping

Under IP/ARP I don't have any duplicated IP. Also reboot of RB would not resolve the problem with dropping ethernet... (all IPs of RB are static)
by Benik3
Tue Aug 26, 2014 7:00 pm
Forum: General
Topic: v6.18
Replies: 109
Views: 30154

Re: v6.18

Does ver 5 help with the 100 % cpu issue? I cant access the thing running 4.17 some times... I know its slow, but, I should be able to configure it.. :-) We have few RB133 and they works better with v5 then v4 :) Otherwise I have 6.18 on one RB600 and it installed wrong - WebFig is not presented (u...
by Benik3
Tue Aug 26, 2014 6:24 pm
Forum: General
Topic: incorrect ping
Replies: 4
Views: 828

incorrect ping

Hello. Yesterday I found a really strange thing with ping on Mikrotiks. Our customers complained, that connection drop. I went ping from our main RB to furthermost RB for few hours without any packet drop or latency issue. In the same time I went also PingPlotter, which showed me the issue - connect...
by Benik3
Wed Jul 16, 2014 1:08 pm
Forum: General
Topic: ROSv6 PCQ queue problem [SOLVED]
Replies: 4
Views: 1363

Re: ROSv6 PCQ queue problem

Thanks for reply!
To be sure, I just booted old RB433 with netinstalled ROS v6.15.
And the simple queue works here :shock:
Maybe it's related only to some RBs?

EDIT: RB600 with 6.18 has also problem...
by Benik3
Tue Jul 15, 2014 8:47 pm
Forum: General
Topic: ROSv6 PCQ queue problem [SOLVED]
Replies: 4
Views: 1363

ROSv6 PCQ queue problem [SOLVED]

EDIT: Solved, change target in simple queue to equivalent subnet (e.g. 10.0.0.0/16) Hello. I use in our network simple queue with PCQ to limit speed on each address. On ROS v5 and lower it worked like a charm, but now I discovered, that on two RB, which has ROS v6, it no longer works. Exactly it loo...
by Benik3
Thu Mar 27, 2014 6:58 pm
Forum: General
Topic: Add print server (printer support)
Replies: 138
Views: 61724

Re: Add print server (printer support)

Then install OpenWrt :) You'll have printer support. Then I don't need to buy Mikrotik with their RouterOS... Also I had DD-WRT on my Asus with USB. Print server worked, but there are two ways how to get this work: Standart TCP/IP connection (LRP or RAW protocol) as in DD-WRT. It work, but it's onl...
by Benik3
Mon Mar 24, 2014 5:26 pm
Forum: General
Topic: Add print server (printer support)
Replies: 138
Views: 61724

Re: Add print server (printer support)

+1
On RB951 "home router" it should be one of the main feature...
by Benik3
Sun Feb 23, 2014 1:58 pm
Forum: General
Topic: PCQ limit & total limit settings
Replies: 36
Views: 43116

Re: PCQ limit & total limit settings

OK, I get how Limit and Total-Limit works, but I have one question. Are the limits calculated for each queue (simple/tree) or for whole type? I mean, If I will create queue type PCQ_Up and PCQ_Down with Limit 2000 And then in queue simple or tree I will make queue for 10.0.1.0/24 and 10.0.2.0/24 (ea...
by Benik3
Tue Feb 18, 2014 3:17 pm
Forum: General
Topic: Remote setting of router on different subnet
Replies: 2
Views: 561

Re: Remote setting of router on different subnet

It's e.g. some TP-Link router. If he connect it to WAN port, router get address from 10.0.0.0/8, but access on WAN is banned by default. So only way how to get to the router is connect it to LAN and reach settings on e.g. 192.168.1.1... Of course I'm not connected directly into our RB on which is th...
by Benik3
Tue Feb 18, 2014 11:09 am
Forum: General
Topic: Remote setting of router on different subnet
Replies: 2
Views: 561

Remote setting of router on different subnet

Hello.

We have a network with subnet 10.0.0.0/8.
Is there any way, how to remotely set some router for customer, if the router has address from 192.168.0.0/24? (That means he will connect it to LAN, because on WAN the remote access is blocked by default).

Thanks :)
by Benik3
Fri Jan 31, 2014 10:53 pm
Forum: Beginner Basics
Topic: RB800 not "routing" [solved]
Replies: 4
Views: 927

Re: RB800 not "routing" [solved]

What you mean with Second LAN?
Off course I can post for you my config :)
by Benik3
Fri Jan 31, 2014 6:38 pm
Forum: Beginner Basics
Topic: RB800 not "routing" [solved]
Replies: 4
Views: 927

Re: RB800 not "routing"

Thanks!
I found that it didn't gave me also gateway. After adding to DHCP-networks it works OK :)
by Benik3
Fri Jan 31, 2014 2:39 pm
Forum: Beginner Basics
Topic: RB800 not "routing" [solved]
Replies: 4
Views: 927

RB800 not "routing" [solved]

Hello. I have a problem with RB800. I'm not able to get connection through it. My setting is like SOHO router: eth1 is WAN (from ISP). I have DHCP client on eth1 (ip is from 192.168.1.1/24 now) I setted eth1 as gate (0.0.0.0/0) in IP routes I have masquerade in NAT (srcnat, out interface eth1) DHCP ...
by Benik3
Sun Jan 26, 2014 5:55 pm
Forum: RouterBOARD hardware
Topic: RB800 bad on-board power supply?
Replies: 1
Views: 852

RB800 bad on-board power supply?

Hello. I have here one mikrotik RB800 which unfortunately died. It looks on on-board power supply problem, probably connected with a humidity, because I can see white "maps" around e.g. filter capacitors legs... The RB doesn't boot (fan is rotating, but no beeping). I found, that Q9 and Q10 are gett...
by Benik3
Wed Dec 11, 2013 11:55 pm
Forum: RouterBOARD hardware
Topic: RB493 question
Replies: 7
Views: 1312

Re: RB493 question

Can also someone confirm it?
Because second engineer still stand up for his opinion that it doesn't work and I don't have any free RB to test it :/
by Benik3
Mon Dec 09, 2013 2:55 am
Forum: RouterBOARD hardware
Topic: RB493 question
Replies: 7
Views: 1312

Re: RB493 question

Thanks a lot! :)
by Benik3
Mon Dec 09, 2013 2:07 am
Forum: RouterBOARD hardware
Topic: RB493 question
Replies: 7
Views: 1312

Re: RB493 question

OK, hope you are right :D

Another question, if I got it right, when I don't use the switch IC, the bandwidth is limited by connection to CPU?
I mean:
eth1 has 100Mbs
eth2-eth5 has 100Mbps together
eth6-eth9 has 100Mbps together ?
by Benik3
Mon Dec 09, 2013 1:59 am
Forum: RouterBOARD hardware
Topic: RB493 question
Replies: 7
Views: 1312

Re: RB493 question

Thank you for the reply. Because someone said me, that he tried to set routing on two pots of RB816 which was on one switch chip, but it didn't worked... The same on RB433. So it's not true? We have one RB800+RB816 so it will be better solution then RB493? (There will be main input connection, local...
by Benik3
Sun Dec 08, 2013 2:45 pm
Forum: RouterBOARD hardware
Topic: RB493 question
Replies: 7
Views: 1312

RB493 question

Hello.
I would like to use RB493, but I must be sure, that all ports are fully managementable separately (like on RB800 or RB2011)

Because what I found, it use similar switch chip like daughter board RB816, or RB433 and what I heard, it's not possible on them.

Thank you :)
by Benik3
Sun Oct 27, 2013 6:23 pm
Forum: General
Topic: windows 8.1 fail with vpn authentication
Replies: 3
Views: 3422

Re: windows 8.1 fail with vpn authentication

I can confirm it with PPTP on windows 8.1 and RB800 with ROS 5.25

Adding SendExtraRecord (2) into HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\SecurityProviders\SCHANNEL
solved it, thank you!
by Benik3
Sun Oct 13, 2013 8:50 pm
Forum: General
Topic: limiting the number of udp sessions
Replies: 10
Views: 3797

Re: limiting the number of udp sessions

So this should work?
chain=forward action=add-src-to-address-list p2p=all-p2p connection-state=new protocol=udp 
     address-list=UDP over limit address-list-timeout=0s connection-limit=100,32
by Benik3
Tue Sep 24, 2013 12:55 am
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16519

Re: As we would like to evolve the wireless

Maybe also frequency usage scan to file :)
by Benik3
Thu Jun 06, 2013 12:27 am
Forum: General
Topic: v5.25 released
Replies: 52
Views: 16717

Re: v5.25 released

Thanks.
I can't update license without upgrade to v3.3?
by Benik3
Wed Jun 05, 2013 11:51 pm
Forum: General
Topic: v5.25 released
Replies: 52
Views: 16717

Re: v5.25 released

If I have RB with e.g. ROS 3.17, can I update it directly to 5.25?
Thanks

jp: You can use NTP only north-america.pool.ntp.org :)
by Benik3
Wed Jun 05, 2013 4:57 pm
Forum: The Dude
Topic: [Q] Default login for RoterOS + config more mikr. together
Replies: 1
Views: 1068

Re: Default login/pass for RoterOS

Never mind, it doesn't help me.
But is possible to configure more mikrotiks in one time threw dude?
Send some script or something similar to selected devices...

Thanks
by Benik3
Mon Jun 03, 2013 5:17 pm
Forum: The Dude
Topic: [Q] Default login for RoterOS + config more mikr. together
Replies: 1
Views: 1068

[Q] Default login for RoterOS + config more mikr. together

Hello. I'm new to dude, but I want a little help. I want to scan our network, but problem is, that snmp is turned off by default on mikrotiks and I really don't want to enable it manually on each device in network... So it doesn't read data, also it doesn't connect the devices together or more IP to...
by Benik3
Sat Jun 01, 2013 7:32 pm
Forum: Beginner Basics
Topic: Problem with "routing"
Replies: 0
Views: 418

Problem with "routing"

HI. We have a problem on our main RB800. We have RB800 to net. ON the output eth we have addresses 10.0.0.1/30 and 10.0.0.134/29. On the ethernet there is ubnt 10G with IP 10.0.0.132. On the other side there is ubnt 10G with IP 10.0.0.131 and connected to eth of another RB800. (both ubnt in bridged ...
by Benik3
Fri May 10, 2013 5:51 pm
Forum: General
Topic: 5.24 released!
Replies: 161
Views: 44862

Re: 5.24 released!

After 3 days of trial and error and lots of mad customers we have found a fix that seems to work for the NV2 lockup and rate problem. Adaptive Noise Immunity - Off Data Rates - Rate Selection - Legacy Data Rates - Default NV2 - Tdma period size - 2 Mike Francis JMF Solutions, Inc http://jmfsolution...