MikroTik

GhostWorks

Yes, I've noticed some odd high-pitched sounds on our new 1036 that occur right before the fan starts to spin up (after being off and cool for awhile) and during reboots. Hard to explain, but steps/ticks with a high frequency then it ramps up in sound and the fan kicks in. Once the unit has been ru...

GhostWorks

I have a CCR1036-12G-4S with 3 x ADSL Draytek Vigor120 to Ethernet ADSL lines, plugged into Ether1, Ether2 and Ether3 PPPoE-out1 > Ether1 ( Static Business ADSL , Gateway:195.10.125.248 ) [13Mb] PPPoE-out2 > Ether2 ( Static Business ADSL , Gateway:195.10.125.248 ) [13Mb] PPPoE-out3 > Ether3 ( Dynami...

GhostWorks

Sorted ,

GhostWorks

is it possible to bond all three WAN's , each is about 13Mb down

GhostWorks

Seems working now .... brilliant will do the same for Ether2 and Ether3 as they will be for WAN2 and WAN3

GhostWorks

"Add Default Route" for Ether1 is now "NO"

GhostWorks

Thanks will look into that one

telnet print.JPG

DHCP client.JPG

PPPoE client WAN1.JPG

GhostWorks

Routes: DS : 0.0.0.0/0 : 195.10.125.248 reachable 673194 : 1 DAS : 0.0.0.0/0 : 192.168.10.1 reachable ethernet1 DAC : 192.168.1.0/24 : ether4 reachable : : 192.168.1.1 DC : 192.168.10.1/32 : ether1 reachable : : 192.168.10.11 DAC : 195.10.125.248/32 : 673194 reachable : : 213.137.0.16 ISP/WAN : 213....

GhostWorks

Done still no luck..

Bear in mind my CCR had no setting at all not even ip 192.168.88.1, everything was empty
I was hoping to get 1 WAN up and running so i could pay a consultant to remote into it and setup the rest

GhostWorks

Tried that, changed "Out. Interface" from "Ether1" to "673194" ( PPPoE name ) which is using Chain = srcnat Action = masquerade

still no luck ,

GhostWorks

thanks will look into that too

Ethernet1 is for ADSL modem ( Draytek Vigor120 )
Ethernet4 is LAN ( 192.168.1.1 )

GhostWorks

I'm trying to setup my CCR1036-12G-4S with the same adsl modem ( Draytek Vigor120) but my issue is worse Interface .... PPPoE interface > Ethernet1 Ethernet1 > ADSL Ethernet modem Ethernet4 > 192.168.1.1 ( DHCP : Yes ) LAN utilizing tools > ping and ping 8.8.8.8 via PPoE interface works, however try...

GhostWorks

I've setup a PPPoE client to a ADSL to ethernet modem on ethernet1, it says connected

no internet , but ping tool pings external address via PPPoE account but not Ethernet1 , is there a link/NAT/Route need to link PPPoE to Ethernet1

GhostWorks

Ping test shows that PPP client sees internet IP's but not ethernet1 which PPP adsl modem is connected to

GhostWorks

Ping test shows that PPP client sees internet IP's but not ethernet1 which PPP adsl modem is connected to

GhostWorks

Thanks done, been trying to sort internet out on wan1 for now on ethernet1 , using ethernet4 for lan So far given ip address to ethernet 4, added dhcp server , nat , and ppp client to ethernet 1 and dns PPP client says connected and even receives the static IP from ISP , visible in routes dynamically

GhostWorks

I bought a CCR1036-12G-4S been trying to give it a IP as can't access it via webfig only via Winbox ( MAC Address access ) All Mikrotik discovery apps ( iOS & winbox ) etc detect the mac as standard and IP as 0.0.0.0 The online manual said "The Ethernet ports 1 has a default IP address for ...

GhostWorks

I can't even give the CCR an ip address for WEbfig access, Seems over my head

GhostWorks

Am trying to do the following setup .. Ethernet1 > WAN1 ( Draytek Vigor120 Adsl to Ethernet PPPoE ) Ethernet2 > WAN2 ( Draytek Vigor120 Adsl to Ethernet PPPoE ) Ethernet3 > WAN3 ( Draytek Vigor120 Adsl to Ethernet PPPoE ) Ethernet4 > LAN1 ( VLAN1 with DHCP Server for 192.168.1.0/24 ) Ethernet5 > LAN...

GhostWorks

Tried again no luck yet , reset and going to try again , any recommendations?

GhostWorks

I'll try give it a go this afternoon.

Just wanted to get 1 wan via Adsl to Ethernet to work so I can hire a mikrotik consultant to setup the rest via the already setup wan

GhostWorks

Thanks

Received it today, tried to setup with 1 wan for now while other router runs other 2 till I can migrate over.

Couldn't get it setup to use the Adsl vigor120

Will give it another shot tomorrow afternoon

GhostWorks

Which Adsl modems do you recommend as the best for CCR or router boards ?

GhostWorks

Ordered one today

GhostWorks

6.0 just been released ... Fantastic as I just ordered a CCR1036

GhostWorks

I've just ordered a CCR1036-12g-4s, hopefully my vigor 120's Adsl to Ethernet modems are best companion for it

I believe my ISP on all 3 Adsl lines use Fujitsu DSLAM

ImageUploadedByTapatalk1369062351.149300.jpg

GhostWorks

Currently my setup is 3 x Draytek vigor 120's Adsl to Ethernet modems. To a Draytek vigor 3900 enterprise security firewall router

GhostWorks

ImageUploadedByTapatalk1369052828.650192.jpg I have 3 WAN's into the cabinet all via ADSL2+ all from same ISP , 2 of which is business Adsl and 1 is home Adsl I'd like to bond all 3 wan's and have 4 Ethernet LAN to HP 1910-48 switch trunked and 1 Ethernet to guest server for hotspot control will I ...

GhostWorks

Load balance won't add the 2x 20mb to give 40mb

I'd look into bonding the lines

GhostWorks

We are now using a CCR-1036 as our firewall/internet gateway and we are very impressed We have 2000 users with 5-600 concurrent on a 100mb WAN and 250 firewall rules, 20 NAT rules, 20 mangle rules, OSPF, PBR to caching box and PPTP VPN 10 PCQ Queues I have to say that for the money this device is a...

GhostWorks

There is a work around to bond 2 or more lines from same ISP ( same gateway ) to add all bandwidth , try the wiki

GhostWorks

Sounds like bonding you need to do load balance is slightly different as it doesn't double your bandwidth but shares the 2 lines evenly between workstations

GhostWorks

Load balance the 3 lines probably would do the trick

GhostWorks

Me I just like to have the best ... Lol since I live and work in the same building and it's my own business , have nothing ruining it , have no lag etc etc

GhostWorks

it will be the Main Core Router and only Router with the following WAN's 2 x Business ADSL2+ via Draytek Vigor120's ( each @ 13MB/s down at 20:1 ratio ) 1 x Home Adsl2+ via Draytek Vigor120 ( each @ 13MB's down at 50:1 ratio ) would be nice to bond all three ADSL lines but QOS for LAN2 use always go...

GhostWorks

I'm waiting till v6 is stable

GhostWorks

Basically management wants me to replace the current router around June , as the current one lags and has issues that are intermittent.

They want the CCR1036-12G-4S

GhostWorks

The CCR1036-12G-4S looks ideal, since been told that fiber to business in my area is in testing and be rollout by end of 2013.

GhostWorks

Thanks I've read most of the cloud core router topic which is 15 pages at the time if this post , seems your getting better support on updated ROS than other manufacturers. I bought a Draytek Vigor3900 which is slighty more in price than a CCR1036-12G-4S The Cloud Core looks to be a beast of a route...

GhostWorks

Anyone ready to give a review now that it's been release ?

GhostWorks

Currently I have 4 Draytek AP700 Air-stations that open ( no encryption or authorization ) but an untangle Server ( Desktop PC ) that does a Captive Portal Page Authorization to allow traffic to the current Router/Gateway Draytek Vigor3900. All that is required is a nice looking Captive Portal Page ...

GhostWorks

Thanks

GhostWorks

What's the best adsl2+ modems to Ethernet devices used with routerboards ???

GhostWorks

So far got 3 adsl2+ lines via 3 x vigor 120 adsl to Ethernet modems, 2 of the lines are business static ip 20:1 ratio while the third is standard home adsl 50:1 ratio. All 3 lines are from the same ISP, same gateway , same DNS , same cable length to exchange. However to far for VDSL , just slightly ...

GhostWorks

I have a games night in house with friends twice a week , they bring their own gear ...
However with gaming becoming more Internet based , the power will come in handy

GhostWorks

True it would be over kill, but then at least you know it will never have issues due to high load etc I'm trying to give my current draytek vigor 3900 a chance to shine , if issues come back then possibly upgrade if I can confirm the reliability and success of mikrotik router boards RoutorOS from ot...

GhostWorks

Business / Personal LAN consists of : QNAP TS-259 Pro ( Linux Network attached storage ) HP DataVault x510 + CPU upgraded to Quad core and 4GB Ram ( Windows home server 2011 + Panasonic NVR Software ) HP Procurve v1910-48G Siemens Gigaset DX800a Telephone system Network Credit/Debit card machine HP ...

GhostWorks

Same here... got to have the speed and power to handle anything thrown at it

GhostWorks

My current router is at the same price level at this.
How reliable are mikrotik router boards ?

GhostWorks

I've been looking into the Cloud Core Router CCR1036-12G-4S Basically my network consists of two VLAN's, plus 3 x adsl2+ lines via vigor120 adsl Ethernet modems to a Draytek Vigor3900 Router, both VLAN's are separated at the 3900 via the separate Ethernet connections. I haven't been happy with the r...

Search found 50 matches