As in topic, is this normal that with proper (i hope so) config i get bilions of "excessive broadcasts/multicast, probably a loop" entries in log? RB951-2n got two IPTV settop box'es, i use switch chip to provide L2 to them. vlan 300 - IPTV vlan 701 - management vlan 0 (untaged) - pppoe fo...

HI. Problem description: on entry interface (ether1) i have vlan10, vlan20 and vlan30 (taged using customer VID) i want to get those vlans on interface ether2 but tagged with one more vlan header (customer VID should be used). Is this possible to achieve this without using bridge ? Switch chip shoul...

You are right, my mistake.

I suggest to choose CRS109. It is still Router witch ROS lvl5 :) but have more gig ports and supports 802.3af . So if you need 8 gig + sfp choose CRS, if you prefer 5 gig + 5 fast + sfp choose 2011. But remember that in 2011 are two different switch chips so you can't bridge gig port witch fast port...

Dasan H640SFP is gepon sfp module compatible with any Dasan olt. But I can't guiarantee that this will work with mt FTC converter. (1,25 / 1,25 vs 1,25 / 2,5 )

Post your configuration, then we can think what is wrong.

I already test originate disconnect message from freeradius and it works. But its like a building a nuclear reactor for only one accespoint ;) It's not worth it. How to explain customer that pppoe session have to be disconnect few times per day. MT stuff is really close to make support for Coa in RO...

Any respond? Anyone? Cos I'm stuck, i don't know what to do now (dig in the problem or start to search for new way to remotely manage pppoe clients)

Hi MT stuff. ROS is without doubt pice of great work. But... It seems like Radius Coa feature won't work with pppoe. Acording to wiki radius description someone like me could be confused. Wiki tells that Coa is supported as well. But I'm stuck on "unsupported expression" error. I find post...

I already ordered 260gsp with hope that this can handle Router OS but with Switch OS it still can be useful

Is this possible to install Router OS on RB260GSP ?
I ask because on Mikrotik Download page 260gsp is mention in x86 instruction set.

yep, customer that we had to move from wlan1 to wlan2 uses before planex router witch external antenna attached via rpsma , we change this archaic setup and now it is excellent MikroTik cpe sxt lite2

I supposed that someone uses old planex mac address to connect with protected ssid

forgive me that, i already edit first post and put log in clear text

wlan2 had wpa1 authentication enabled Those two macs doesn't exist in local ACL, the even don't exist in whole network. its quiet wired because that macs tried to communicate with AP all the time more than 10 times per second AP had to send deauth package. Even if I add them to ACL they don't try to...

From yesterday I see almost only this in logs 16:40:40 wireless,info wlan2: data from unknown device 00:90:CC:9F:69:9F, sent deauth 16:40:40 wireless,info wlan2: data from unknown device 00:90:CC:9F:69:9F, sent deauth 16:40:42 wireless,info wlan2: data from unknown device 00:90:CC:9F:69:9F, sent dea...

please show us the content of /etc/raddb/sites-enabled/default file

+1 for CoA .

We really need it for yesterday...

Actually i run The Dude under Windows cos it is the simplest way. I have Oracle VBox with Debian 6 guest and installed sms server tools on it. I am able to execute command in linux shell like sendsms (with will send specific message on specific number if i add parameters) I'm also able to create fil...

I got exactly the same issue like You describe above. I can only add 2011UAS-2HnD-IN and 951G-2HnD to your list.

Do you get correct IP from server (including gateway and dns) ?

paste here IP Route list and IP firewall NAT rules:)

in IP address add 192.168.2.1/24 on interface wlan1 after that, open IP DHCP Server window and go for DHCP Setup 1. choose Interface wlan1 2. make sure that DHCP address space is correct ( it suppose to be 192.168.2.0/24 ) 3. the gateway for this server suppose to be 192.168.2.1/24 4. then define th...

In interface list edit interfaces from ether2 to ether5 and change "master port"from "none" to "ether1" now interfaces from 1 to 5 will work as switch and the master port will be ether1 Next step is to get the public IP on the ether1 If there is DHCP server add DHCP cli...

i have similar problem, attached ZTEMF626 to rb2011 It runs properly when I make some changes in modem. This is because my MF626 have build in microSD card reader, so it have ability to work as pendrive. I use some AT commands to change some features in it. I can't tell what i have don exactly (it w...

tell us something more

1. Are You going to connect rb2011 to Internet using one of interfaces from 1 to 5 ?
2. Do You have to static add your public IP or there is some PPPoE, DHCPipv4 or DHCPipv6 server from Internet side?


This is possible

THX again, i will back to this when i will be home (i don't want to make more mess)

masquerade is probably using IP xxx.xxx.47.18 - it is my static public IP address (i think so, now I'm little confused )

most tutorials i read tells that masquerade with only out interface is the simplest way :/

I do not use any IP to masquerade, i use only Out interface eth10

THX for so fast reply /ip address # ADDRESS NETWORK INTERFACE 0 xxx.xxx.47.18/30 xxx.xxx.47.16 ether10 WAN1 1 10.10.10.1/24 10.10.10.0 bridge1 2 10.13.5.1/24 10.13.5.0 ether10 WAN1 /ip routes # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 xxx.xxx.47.17 1 1 ADC 10.10.10.0/24 10.10.10.1 bridg...

Hi, I want to get a ability of remote log on to my platforms that are inside a NAT'ed network. WAN router is RB2011UAS-2HnD-IN WAN port is eth10 with static IP address: xxx.xxx.47.18 There is only two subnets inside NAT'ed network : xxx.xxx.10.0/24 on bridge 1 that compares ports from eth1 to eth5 a...

Hardware: Two RB SXT Lite5 RouterOS 5.24 One RB 2011UAS-2HnD IN RouterOS 5.24 One RB 951G-2HnD RouterOS 6.1 Simple network diagram: rb2011 <--> SXT5 <--> SXT5 <--> rb951 Distance between two SXT i about 350m Fresnel zone isn't clear in 100 percent (but close, only low voltage power line is on the wa...