I am looking for a Mikrotik Router capable for PPC load balancing of 5 vDSL 100/10 Mbps. Also, I want to add some queues rules for better balancing to the clients and maybe some Layer 7 firewall rules. The setup is for a hotel with 200 guest/max simultaneously. Which hardware do you believe suits be...

Did you found any solution to that problem or I purchased a dummy wifi router with big antennas? Can you please share your config? /interface wireless export hide-sensitive file=anythingyoulike /interface wireless set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-XX \ country=n...

Hi. I am also having a wifi coverage problem on ac3. I purchased a hAP ac3 instead on ac2 because the external antennas but the wifi coverage on 2.4Ghz is average and 5Ghz is bad. My ISP router ZTE H288A has much better coverage. I tried also fixed channels with the same results. Did you found any s...

Do you find any solution to poor wifi perfomance?

I have a RB951G-2HnD and the wifi perfomance is so poor.
On speedtest.net with cable I have 9-11Mbps and on wifi 0.6-2 Mbps.

Same problems again. Some other ideas to test?

I use mikrotik on ch.6 and tp-link as client on wan port on ch.12, antenna gain to 7.

The problem seems to be the strong wifi signal from Mikrotik. I change the channel to 6 (same as the client) and reduce the signal power. Frequency mode: regulatory-domain Antenna Gain: 15 Now work more stable an with more speed. The problem is that my portable devices (smartphones, tablets) can't a...

Same results with your configuration. Also tried to run test from other room not near Mikrotik.
Speedtest start at 5Mbps and final drop on 0.39Mbps with upload 0.89Mbps.Upload is normal.
wifi card: Intel(R) WiFi Link 5300 AGN
Here is my configuration.

Hi I have this strange situation. I have 951 connected in wan port with a tp-link(client) device, distributing internet to my home from my neighbor adsl router. When I connect my laptop to lan port on my 951 and try speedtest.net I am taking speeds about 10Mbps. When I connect my laptop wireless on ...

Hi. I want to help me with my config. I have a mikrotik RB2011. On ethernet 1 i have the gateway. On ethernets ports 2-5 i have my office network (192.168.88.1) LAN A On ethernets ports 6-10 i have my guests network (192.168.2.1) LAN B If I open explorer and type the ip from a pc on other network I ...

Ok. Everything seems to work ok...using switch function and bridging.

Thanks.

What about the access points? I use the switch fuctions for the ethernet interfaces. Then I must create a bridge using eth6 and VirtualAP as interface to the bridge?

Any help please?

Interesting... I tried to make my setup using bridges but with no so luck. DHCP server on my guests Lan didn't served IPs to many the machines. My galaxy Nexus worked without problem on two networks, but my laptop using wifi or Lan had problem to resolve IP from router. You descripted that you are u...

Any help guys? Here is my setup. On ether1-gateway I have my adsl modem and running pppoe for connection to my ISP. On ether2-ether5 I have my PCs and running a bridge_AP on my mikrotik for smartphones and laptops. All the above I wanted to one VLAN1 (192.168.1.0/24) and a DHCP Server giving IPs to ...

Hi to the community. I am new to mikrotik so I need your help. I just bought a RB2011UAS-2HnD-IN and I am playing with it to teach my self how its works. Using the default configuration that router have when you buy it, I managed to established an internet connection. I setup my adsl modem as a brid...